Determination of sodium and ammonium ions in disproportionate concentration ratios by ion chromatography

J Chromatogr A. 1999 Jul 30;850(1-2):239-45. doi: 10.1016/s0021-9673(99)00002-3.

Abstract

In ion chromatography, samples of very different ammonium-to-sodium concentration ratios are difficult to quantify since these two cations have similar selectivities for stationary phases containing commonly used sulfonate or carboxylate cation-exchange functional groups. The IonPac CS15 cation-exchange column, with carboxylate and phosphonate functional groups as well as a crown ether group, was developed to address this limitation. Selectivity for the common inorganic cations on this column is different from that of conventional cation-exchange columns in that the separation between sodium and ammonium ions has been greatly increased, allowing for determinations of low levels of one in the presence of high levels of the other with an isocratic eluent. For larger than 4000:1 sodium-to-ammonium concentration ratios, an eluent step change or gradient elution is needed. For moderate ratios, combinations of this column with a carboxylate column, containing no crown ether group, can be used at room temperature with an isocratic eluent containing no organic solvent.

MeSH terms

  • Amines / analysis
  • Chromatography, Ion Exchange / methods*
  • Quaternary Ammonium Compounds / analysis*
  • Sodium / analysis*

Substances

  • Amines
  • Quaternary Ammonium Compounds
  • Sodium