Purpose: This study determined the color stability of a compomer, hybrid ionomer, and composite after staining with three fluoride varnishes.
Materials and methods: Five disks (10 mm in diameter, 2 mm thick) of each material were prepared in a mold and incubated at 100% relative humidity at 37 degrees C for 24 hours. Duraphat, Duraflor, FluorProtector, and water (control) were applied to the disks, which were subsequently brushed with a soft toothbrush and dentifrice. Color was measured at baseline, after staining, and after brushing using CIE L*a*b* (source C) against white background on a reflection spectrophotometer, and color change (delta E*) was calculated. Means (n = 5) and standard deviations were calculated and compared using a repeated-measures analysis of variance (ANOVA). Tukey-Kramer intervals (p = .05) were calculated to compare means.
Results: Varnishes Duraflor and Duraphat caused perceptible color changes (delta E* > 3.3) in compomer, hybrid ionomer, and composite after application; however, FluorProtector did not affect the color of the materials. After brushing, none of the materials exhibited perceptible values of delta E*, except the composite with Duraflor (delta E* = 5.4).