Determination of sulfur dioxide in vitriol plant wastewater by using a polyNiMe4TAA electrochemically modified Pt microelectrode

Analyst. 2001 May;126(5):669-72. doi: 10.1039/b009164m.

Abstract

A Pt microelectrode modified with nickel(II) polytetramethyldibenzo[b,i]tetraaza[14]annulene was prepared by electropolymerization of nickel(II) tetramethyldibenzo[b,i]tetraaza[14]annulene monomers and applied to determine sulfur dioxide in vitriol plant wastewater. For determination of SO2 with this electrochemically modified Pt microelectrode, the linear range was from 9.6 x 10(-6) to 2.4 x 10(-4) mol L-1, the sensitivity was 1.8 x 10(-4) A L mol-1, the detection limit was calculated to be 4.8 x 10(-6) mol L-1 (S/N = 3), the response time was less than 20 s and the relative standard deviation was found to be 2.1% on analyzing 4.8 x 10(-5) mol L-1 SO2 solution repeatedly (n = 7). These results demonstrated good accuracy compared with those obtained by the conventional iodimetric method.

MeSH terms

  • Chemical Industry*
  • Electrochemistry / methods
  • Microelectrodes
  • Sulfur Dioxide / analysis*
  • Water Pollutants, Chemical / analysis*

Substances

  • Water Pollutants, Chemical
  • Sulfur Dioxide