A post-processing noise suppression technique for biomedical MRI images is presented. The described procedure recovers both sharp edges and smooth surfaces from a given noisy MRI image; it does not blur the edges and does not introduce spikes or other artefacts. The fine details of the image are also preserved. The proposed algorithm first extracts the edges from the original image and then performs noise reduction by using a wavelet de-noise method. After the application of the wavelet method, the edges are restored to the filtered image. The result is the original image with less noise, fine detail and sharp edges. Edge extraction is performed by using an algorithm based on Sobel operators. The wavelet de-noise method is based on the calculation of the correlation factor between wavelet coefficients belonging to different scales. The algorithm was tested on several MRI images and, as an example of its application, we report the results obtained from a spin echo (multi echo) MRI image of a human wrist collected with a low field experimental scanner (the signal-to-noise ratio, SNR, of the experimental image was 12). Other filtering operations have been performed after the addition of white noise on both channels of the experimental image, before the magnitude calculation. The results at SNR = 7, SNR = 5 and SNR = 3 are also reported. For SNR values between 5 and 12, the improvement in SNR was substantial and the fine details were preserved, the edges were not blurred and no spikes or other artefacts were evident, demonstrating the good performances of our method. At very low SNR (SNR = 3) our result is worse than that obtained by a simpler filtering procedure.