Fouling by biofilms significantly increases frictional drag on ships' hulls. A device, the friction disk machine, designed to measure torque on rotating disks, was used to examine differences among experimental fouling-release coatings in the drag penalty due to accumulated biofilms. Penalties were measured as the percentage change in the frictional resistance coefficient Cf. Drag penalties due to microfouling ranged from 9% to 29%, comparable to previously reported values. An antifouling control coating showed a smaller drag penalty than the fouling-release coatings. There were also significant differences among the fouling-release coatings in drag due to biofilm formation. These results indicate that the friction disk machine may serve as a valuable tool for investigating the effects of experimental coatings, both antifouling and fouling-release, on microfouling and associated drag penalties.