The repulsion between cellulose and anionic entities could be overcome by imparting cationic sites on its structure. In this work, we studied the treatment of cotton fabric with different amounts of chitosan bio-polymer (0.0125-0.075%), dimethyl diallyl ammonium chloride and diallylamin co-polymer (1-5%), alum (0.5-20 g/L), and sodium chloride (2-40 g/L) in order to improve their dyeing behaviors with an ecological extract of Pistacia vera hulls by-products. The chemical modification of the cellulosic fibers was confirmed using Fourier Transform Infra-Red (FT-IR) and Scanning Electron Microscopy (SEM). The unmodified and modified cellulosic samples were, then, dyed with Pistacia vera extract. The dyeing characteristics were assessed through the measurements of the color coordinates and the color strength. Results showed that the dyeing performance followed the order: Cotton-dimethyl diallyl ammonium chloride and diallylamin co-polymer (K/S = 9.6) > Cotton-Chitosan (K/S = 8.97) > Cotton-Alum (8.84) > Cotton-NaCl (K/S = 6.06) > Untreated cotton (K/S = 1.98). All dyed samples exhibited good fastness to washing, rubbing and light. Overall, it has shown in this study that the functionalization of cellulose structure could greatly improve its dyeing behavior depending on the cationic sites number.
Keywords: Cellulose; Chitosan; Dimethyl diallyl ammonium chloride and diallylamin co-polymer; Dyeing; Pistacia vera.
Copyright © 2019 Elsevier B.V. All rights reserved.