Robust mold fabricated by femtosecond laser pulses for continuous thermal imprinting of superhydrophobic surfaces

Superhydrophobic surfaces rely on a large number of surface micro/nano structures to increase the roughness of a material. Producing such structures is possible through a multitude of relatively slow methods; however, economic and large scale production of superhydrophobic surfaces require using a fast process on a cheap substrate. Here, we used femtosecond laser processing to fabricate micro and nanostructures on tungsten carbide that we use as a mold to thermally imprint polypropylene sheets. The fabricated tungsten carbide mold was used to imprint more than twenty superhydrophobic polypropylene sheets before mold contamination reduces the surface contact angle below 150°.Using Toluene solution, the mold is subsequently capable of being cleaned of contamination from polypropylene residue and reused for further imprinting. Ninety thermoplastic imprints were conducted using a single tungsten carbide mold with only minimal structural degradation apparent on the micro/nano structured surface.