This report presents the first demonstration of passive RF comb filters made using epitaxial GaN/NbN/SiC high overtone bulk acoustic resonators (epi-HBARs). The two-port device is fabricated on electronic-grade GaN, electrically transduced, and acoustically coupled. The multi-mode epi-HBAR comb filter demonstrated here has 158 sharp filter passbands periodically distributed between 1 and 4 GHz (L-S-bands) with a free spectral range (FSR) of 17 MHz. The individual passbands of the epi-HBAR comb filter demonstrate transmission bandwidths (BWs) up to 800 kHz, f × Q values of up to 7×1014 Hz, and an average [Formula: see text] figure of merit of 41.2 at room temperature. The GaN/NbN/SiC epi-HBAR comb filter is capable of operating at high RF power levels, with linear and distortion-free performance seen up to at least 1 W of continuous wave (CW) power and up to at least 10 W of pulsed power. The compact epi-HBAR comb filters can be co-fabricated with GaN-based electronics and could potentially replace larger, off-chip or discrete-component comb filters. They can be used for spectrum sensing and as signal processing elements for remote sensing and pulsed radar.