Slot-scan dual-energy bone densitometry using motorized X-ray systems

Purpose: We investigate the feasibility of slot-scan dual-energy (DE) bone densitometry on motorized radiographic equipment. This approach will enable fast quantitative measurements of areal bone mineral density (aBMD) for opportunistic evaluation of osteoporosis.

Methods: We investigated DE slot-scan protocols to obtain aBMD measurements at the lumbar spine (L-spine) and hip using a motorized x-ray platform capable of synchronized translation of the x-ray source and flat-panel detector (FPD). The slot dimension was 5 × 20 cm² . The DE slot views were processed as follows: (1) convolution kernel-based scatter correction, (2) unfiltered backprojection to tile the slots into long-length radiographs, and (3) projection-domain DE decomposition, consisting of an initial adipose-water decomposition in a bone-free region followed by water-CaHA decomposition with adjustment for adipose content. The accuracy and reproducibility of slot-scan aBMD measurements were investigated using a high-fidelity simulator of a robotic x-ray system (Siemens Multitom Rax) in a total of 48 body phantom realizations: four average bone density settings (cortical bone mass fraction: 10-40%), four body sizes (waist circumference, WC = 70-106 cm), and three lateral shifts of the body within the slot field of view (FOV) (centered and ±1 cm off-center). Experimental validations included: (1) x-ray test-bench feasibility study of adipose-water decomposition and (2) initial demonstration of slot-scan DE bone densitometry on the robotic x-ray system using the European Spine Phantom (ESP) with added attenuation (polymethyl methacrylate [PMMA] slabs) ranging 2 to 6 cm thick.

Results: For the L-spine, the mean aBMD error across all WC settings ranged from 0.08 g/cm² for phantoms with average cortical bone fraction w_cortical = 10% to ∼0.01 g/cm² for phantoms with w_cortical = 40%. The L-spine aBMD measurements were fairly robust to changes in body size and positioning, e.g., coefficient of variation (CV) for L1 with w_cortical = 30% was ∼0.034 for various WC and ∼0.02 for an obese patient (WC = 106 cm) changing lateral shift. For the hip, the mean aBMD error across all phantom configurations was about 0.07 g/cm² for a centered patient. The reproducibility of hip aBMD was slightly worse than in the L-spine (e.g., in the femoral neck, the CV with respect to changing WC was ∼0.13 for phantom realizations with w_cortical = 30%) due to more challenging scatter estimation in the presence of an air-tissue interface within the slot FOV. The aBMD of the hip was therefore sensitive to lateral positioning of the patient, especially for obese patients: e.g., the CV with respect to patient lateral shift for femoral neck with WC = 106 cm and w_cortical = 30% was 0.14. Empirical evaluations confirmed substantial reduction in aBMD errors with the proposed adipose estimation procedure and demonstrated robust aBMD measurements on the robotic x-ray system, with aBMD errors of ∼0.1 g/cm² across all three simulated ESP vertebrae and all added PMMA attenuator settings.

Conclusions: We demonstrated that accurate aBMD measurements can be obtained on a motorized FPD-based x-ray system using DE slot-scans with kernel-based scatter correction, backprojection-based slot view tiling, and DE decomposition with adipose correction.