The dynamic development of flexible wearable electronics creates new possibilities for the production and use of new types of sensors. Recently, polymer nanocomposites have gained great popularity in the fabrication of sensors. They possess both the mechanical advantages of polymers and the functional properties of nanomaterials. The main drawback of such systems is the complexity of their manufacturing. This article presents, for the first time, fabrication of an antimony sulfoiodide (SbSI) and polyurethane (PU) nanocomposite and its application as a piezoelectric nanogenerator for strain detection. The SbSI/PU nanocomposite was prepared using simple, fast, and efficient technology. It allowed the obtainment of a high amount of material without the need to apply complex chemical methods or material processing. The SbSI/PU nanocomposite exhibited high flexibility and durability. The microstructure and chemical composition of the prepared material were investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. These studies revealed a lack of defects in the material structure and relatively low agglomeration of nanowires. The piezoelectric response of SbSI/PU nanocomposite was measured by pressing the sample with a pneumatic actuator at different excitation frequencies. It is proposed that the developed nanocomposite can be introduced into the shoe sole in order to harvest energy from human body movement.
Keywords: energy harvesting; flexible electronics; nanocomposite; piezoelectric effect.