Short-pulsed Q-switched fiber laser using graphene oxide quantum dots based as saturable absorber

In this work, we report the experimental study of a Q-switched optical fiber laser based on graphene oxide quantum dots (GOQDs) as saturable absorber (SA). GOQDs are fabricated by carbonization and exfoliation electrospun polyacrylonitrile (PAN) fibers. The results of Fourier Transform Infrared Spectroscopy (FTIR) showed bands caused by the CHs and C[bond, double bond]O groups associated with the GOQDs. The Raman spectrum showed the typical G and D bands of GOQDs. The size of the GOQDs, calculated by Transmission Electron Microscopy (TEM) was 6 nm; additionally, by high resolution TEM (HRTEM), an interplanar distance of 0.19 nm corresponding to the (002) direction of the graphene oxide was calculated. The SA was achieved using the photodeposition technique of the GOQDs onto the core of a single-mode optical fiber. The nonlinear characterization (NLC) of the GOQDs was carried out using the P-scan technique with a high-gain erbium-doped fiber amplifier (EDFA) at a wavelength of 1550 nm. The obtained results showed a saturable absorption behavior with a value of $\beta ={-1.178x10}^{-6}\left(m/W\right)$ and a non-linear susceptibility of $Im\left({\chi }^{\left(3\right)}\right)\approx {-1.573x10}^{-7}\left(esu\right)$. The experimental results of the SA, based on GOQDs as a switching device in a fiber laser, showed a typical behavior of a Q-switched laser by generating a pulsed emission at a wavelength of 1599 nm, a frequency from 2 to 16 kHz, and a maximum average output power of 1.3 mW.