The current research described in this paper, focuses on the development of a new quinoline-based Mannich-type benzoxazine and its use to obtain advanced carbonisation materials with a high energy storage capacity. Based on this, a quinoline-based benzoxazine monomer (Q-xda) was synthesised by a reaction between 8-hydroxyquinoline, xylylenediamine and paraformaldehyde, and it is characterised by FT-IR and 1H-NMR spectroscopy. Composites were prepared from the benzoxazine and variable weight percentages of graphitic carbon nitride (GCN) (i.e., 5, 10, and 15 wt%). The oxazine ring-opening curing process of the polybenzoxazine composites, and its subsequent pyrolysis reaction was performed; and their chemical structures were confirmed using FT-IR spectroscopy. Also, the thermal and morphological characteristics of the composites were evaluated by XRD, thermogravimetric analysis (TGA), and SEM analyses. According to the results of the thermal experiments, adding GCN reinforcement significantly increased the thermal stability and char yield of the resultant composites. Electrochemical, and hydrophobic investigations were also carried out, and the results of these suggesting that the composites reinforced with 15 wt% GCN exhibit the highest dielectric constant (high κ = 10.2) and contact angle (145°). However, all the crosslinked composites demonstrated a remarkable electrochemical performance as pseudocapacitors. The resulting poly(Q-xda) + 15 wt% GCN electrodes showed a higher capacitance and a lower transferred charge resistance (i.e., 370 F g-1 at 6 A g-1 and 20.8 Ω) than the poly(Q-xda) electrode (i.e., 216 F g-1 at 6 A g-1 and 26.0 Ω). In addition, the poly(Q-xda) + 15% GCN exhibited a cycling efficiency of 96.2% even after 2000 cycles. From these results, it can be concluded that the constructed electrodes perform well in electrochemical operations.