Biosynthesis of High Toughness Poly(3-Hydroxypropionate)-Based Block Copolymers With Poly(D-2-Hydroxybutyrate) and Poly(D-Lactate) Segments Using Evolved Monomer Sequence-Regulating Polyester Synthase

This study synthesized poly(3-hydroxypropionate) [P(3HP)]-containing polyhydroxyalkanoate (PHA) block copolymers, P(3HP)-b-P[2-hydroxybutyrate (2HB)] and P(3HP)-b-P(D-lactate) (PDLA), using Escherichia coli. The cells expressing an evolved sequence-regulating PHA synthase, PhaC_ARNDFH, and propionyl-CoA transferase were cultured with the supplementation of the corresponding monomer precursors in the medium. The block structure of P(3HP)-b-PDLA was confirmed by proton nuclear magnetic resonance analysis and solvent fractionation. The molecular weights of the polymers were in the range of 0.8-2.8 × 10⁵. The solvent-cast polymer films were subjected to isothermal treatment to promote phase separation and crystallization and were subsequently melt-quenched to produce an amorphous phase. The melt-quenched P(3HP)-b-P(2HB) film exhibited a high elongation at break (1153%), resulting in a toughness of 181 MJ/m³. The solvent-cast film of P(3HP)-b-65 mol% PDLA exhibited partial elastic deformation, in which the P(3HP) phase functioned as a soft segment. The melt-quenching of the polymer resulted in embrittlement presumably due to the high lactate fraction. Overall, the P(3HP)-based block copolymers exhibited several mechanical properties depending on the higher-order structure of the polymer and the properties of the P(2-hydroxyalkanoate) segments. This study findings show that P(3HP)-b-P(2HB) and P(3HP)-b-PDLA can function excellently if their microstructures are properly controlled.