Introduction This research aims to validate the proficiency and accuracy of the robotic microsurgery platform using rat femoral vessel model. Materials and Methods Total of 256 rat femoral vessels were performed, half using robotic and the other by manual microanastomosis by 8 microsurgeons with less than 5 years of experience given 8 trials (rats) each. Vessel demographics, proficiency (duration of suture and Structured Assessment of Robotic Microsurgical Skills (SARMS)) and accuracy (patency and Scanning Electron Microscopic (SEM)) was analyzed between the two groups. Results Using the robot, an average of 4 trials was needed to reach a plateau in total anastomosis time and patency. Significant more time was required for each vessel anastomosis (34.33 versus 21.63 minutes on the 8th trial, p<0.001) one factor being higher number of sutures compared to the hand-sewn group (artery: 7.86±0.51 versus 5.86±0.67, p=0.035, vein: 12.63±0.49 versus 9.57±0.99, p=0.055). The SARMS scores became nonsignificant between the two group on the 4th trial. The SEM showed higher tendency of unevenly spaced sutures, infolding, tears in the vessel wall for the hand-sewn group. Conclusion Using the robot, similar patency, accuracy, and proficiency can be reached through fast but steep learning process within 4 trials (anastomosis of 8 vessels) as the hand-sewn group. The robotic anastomosis may take longer time, but this is due to the increased number of sutures reflecting higher precision and accuracy. Further insight of precision and accuracy was found through the SEM demonstrating the possibility of the robot to prevent unexpected and unwanted complications.
Thieme. All rights reserved.