A new study explores the distinct roles of spontaneous polarization and piezoelectric polarization in piezo-phototronic coupling. This investigation focuses on differences in photocatalytic and piezo-photocatalytic performance using sodium bismuth titanate, a key ferroelectric material. The research aims to identify which type of polarization has a greater influence on piezo-phototronic effects. A theoretical assessment complements the experimental findings, providing additional insights. This study explores the enhanced piezo-phototronic performance of electrospun nanofibers compared to sol-gel particles under different illumination conditions (11 W UV, 250 W UV, and natural sunlight). Electrospun nanofibers exhibited a rate constant (k) improvement of 2.5 to 3.75 times, whereas sol-gel particles showed only 1.3 to 1.4 times higher performance when ultrasonication was added to photocatalysis. Analysis using first-principle methods revealed that nanofibers had an elastic modulus (C33) about 2.15 times lower than sol-gel particles, indicating greater flexibility. The elongation of the lattice along the z axis in the case of nanofibers reduced the covalency in the Bi-O and Ti-O bonds. These structural differences reduced spontaneous polarization and piezoelectric stress coefficients (e31 and e33). Despite having lower piezoelectric stress coefficients, higher flexibility in nanofibers led to a higher piezoelectric strain coefficient, 2.66 and 1.97 times greater than sol-gel particles, respectively. This improved the piezo-phototronic coupling for nanofibers.
© 2024 Author(s). Published under an exclusive license by AIP Publishing.