Mangrove forests are essential on the Amazon coast, as local communities widely use their wood. However, it is still necessary to understand the mechanical properties of wood typical of mangroves. Our main objective was to understand the influence of density on mechanical properties. Then, we tested the hypothesis that wood density has a stronger influence on the mechanical properties of R. mangle trees. Five trees of each dominant mangrove species were cut, and the mechanical properties of wood from these species were analyzed according to ASTM D143-14. Rhizophora mangle wood presented the highest average values compared to other mangrove species for mechanical properties (ρ12% = 1031.6 kg m-3; fv0 = 21.8 Mpa; fc0 = 79.6 Mpa; fM = 190.0 Mpa; EM0 = 18.8 Gpa), as well as for resistance and rigidity. Wood from mangrove trees on the Amazon coast has the same trend of mechanical properties as trees from Asian mangroves. Avicennia germinans and Laguncularia racemosa have a moderate rating. Rhizophora mangle stands out for presenting the highest values of these properties, with the species of Rhizophoraceae being considered the most resistant wood among mangrove species worldwide.
Copyright: © 2024 Galvão et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.