Optical absorption of blood depends on temperature during a 0.5 ms laser pulse at 586 nm

Photochem Photobiol. 1998 Mar;67(3):276-81.

Abstract

Optical properties are important parameters in port wine stain laser treatment models. In this study we investigated whether changes in blood optical properties occur during a 0.5 ms laser pulse. Blood from three volunteers was irradiated in vitro with laser pulses (radiant exposure 2-12 J cm-2, wavelength 586 nm, pulse length 0.5 ms). Reflection and transmission coefficients, measured using double integrating spheres, decreased slightly during the first part of the pulse. At 2.9 J cm-2 radiant exposure, the reflectance increased, independent of total radiant exposure of the pulse. This was caused by blood coagulation. A second sudden increase in reflection and a significant increase in transmission occurred near 6.3 J cm-2 and was accompanied by a "popping" sound, indicating rapid expansion of bubbles due to blood vaporization. A multilayered model of blood was used to fit calculated transmission coefficient curves to the measurements and determine temperature-dependent optical blood absorption. Heat diffusion was shown to be of minor importance. A 2.5-fold increase in absorption for temperatures increasing from 20 to 100 degrees C, accurately describes transmission coefficients measured up to 2.9 J cm-2.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Absorption
  • Blood / radiation effects*
  • Humans
  • Laser Therapy*
  • Port-Wine Stain / surgery
  • Spectrophotometry
  • Temperature