A heart-torso model including fiber orientation is used to calculate electric field strength in an active-can transvenous defibrillation system and estimate errors due to inadequate description of the anisotropy of the myocardium. Using a minimum potential gradient (5 V/cm) in a critical mass (95%) of the tissue, the estimated defibrillation voltage threshold for a right ventricular transvenous lead placement differs by only 4.5% when using isotropic myocardial conductivity compared to a model with realistic fiber architecture. In addition, pointwise comparisons of the two solutions reveal differences of 10.8% rms in potential gradient strength and 31.6% rms in current density magnitude in the myocardium, resulting in a change in the location of the low gradient regions. These results suggest that if a minimum potential gradient throughout the heart is necessary to avoid reinitiation of fibrillatory wave fronts, then isotropic models are adequate for modeling the electric field in the heart. Alternatively, the model demonstrates the use of physiologically based descriptions of anisotropy and fiber orientation, which will soon allow simulations of shock induced membrane polarization during defibrillation.