Search Results (5,602)

Comprehending the electrochemical condition of a lithium-ion battery (LiB) is essential for guaranteeing its safe and effective operation. This insight is increasingly obtained through characterization tests such as a differential capacity analysis, a characterization test well suited for the electric transportation sector due to its dependency on the available voltage and current (E–I) data. However, a drawback of this technique is its time dependency, as it requires extensive time due to the need to conduct it at low charge rates, typically around C/20. This work seeks to forecast characterization data utilizing 1C cycle data at increased temperatures, thereby reducing the time required for testing. To achieve this, three neural network architectures were utilized as the following: a recurrent neural network (RNN), feed forward neural network (FNN), and long short-term memory neural network (LSTM). The LSTM demonstrated superior performance with evaluation scores of the mean squared error (MSE) of 0.49 and mean absolute error (MAE) of 4.38, compared to the FNN (MSE: 1.25, MAE: 7.37) and the RNN (MSE: 0.89, MAE: 6.05) in predicting differential capacity analysis, with all models completing their computations within a time range of 49 to 299 ms. The methodology utilized here offers a straightforward way of predicting LiB degradation modes without relying on polynomial fits or physics-based models. This work highlights the feasibility of forecasting differential capacity profiles using 1C data at various elevated temperatures. In conclusion, neural networks, particularly an LSTM, can effectively provide insights into electrochemical conditions based on 1C cycling data. Full article

Accurate carbon intensity forecasts enable consumers to adjust their electricity use, reducing it during high fossil-fuel generation and increasing it when renewables dominate. Existing methods for carbon intensity forecasting can be categorized into a source-disaggregated approach (SDA), focused on delivering individual generation forecasts for each potential source (e.g., wind, brown-coal, etc.), and a source-aggregated approach (SAA), attempting to produce a single carbon intensity forecast for the entire system. This research aims to conduct a thorough comparison between SDA and SAA for carbon intensity forecasting, investigating the factors that contribute to variations in performance across two distinct real-world generation scenarios. By employing contemporary machine learning time-series forecasting models, and analyzing data from representative locations with varying fuel mixes and renewable penetration levels, this study provides insights into the key factors that differentiate the performance of each approach in a real-world setting. The results indicate the SAA proves to be more advantageous in scenarios involving increased renewable energy generation, with greater proportions and instances when renewable energy generation faces curtailment or atypical/peaking generation is brought online. While the SDA offers better model interpretability and outperforms in scenarios with increased niche energy generation types, in our experiments, it struggles to produce accurate forecasts when renewable outputs approach zero. Full article

Anemia diagnosis is crucial for pediatric patients due to its impact on growth and development. Traditional methods, like blood tests, are effective but pose challenges, such as discomfort, infection risk, and frequent monitoring difficulties, underscoring the need for non-intrusive diagnostic methods. In light of this, this study proposes a novel method that combines image processing with learning-driven data representation and model behavior for non-intrusive anemia diagnosis in pediatric patients. The contributions of this study are threefold. First, it uses an image-processing pipeline to extract 181 features from 13 categories, with a feature-selection process identifying the most crucial data for learning. Second, a deep multilayered network based on long short-term memory (LSTM) is utilized to train a model for classifying images into anemic and non-anemic cases, where hyperparameters are optimized using Bayesian approaches. Third, the trained LSTM model is integrated as a layer into a learning model developed based on recurrent expansion rules, forming a part of a new deep network called a recurrent expansion network (RexNet). RexNet is designed to learn data representations akin to traditional deep-learning methods while also understanding the interaction between dependent and independent variables. The proposed approach is applied to three public datasets, namely conjunctival eye images, palmar images, and fingernail images of children aged up to 6 years. RexNet achieves an overall evaluation of 99.83 ± 0.02% across all classification metrics, demonstrating significant improvements in diagnostic results and generalization compared to LSTM networks and existing methods. This highlights RexNet’s potential as a promising alternative to traditional blood-based methods for non-intrusive anemia diagnosis. Full article

In the development of decarbonization technologies and renewable energy, water electrolysis has emerged as a key technology. The efficiency of hydrogen production and its applications are significantly affected by power stability. Enhancing power stability not only improves hydrogen production efficiency and reduces maintenance costs but also ensures long-term reliable system operation. This study proposes a thermal control method that stabilizes hydrogen output by precisely adjusting the temperature of the electrolysis stack, thereby improving hydrogen production efficiency. Fluctuations in the electrolysis stack temperature can lead to instability in the hydrogen output and energy utilization, negatively affecting overall hydrogen production. To address this issue, this study introduces an innovative system architecture and a novel thermal control strategy combining fuzzy logic control with a long short-term memory neural network. This method predicts and adjusts the flow rate of chilled water to maintain the electrolysis stack temperature within a range of ±1 °C while sustaining a constant power output of 10 kW. This approach is crucial for ensuring system stability and maximizing hydrogen production efficiency. Long-term experiments have validated the effectiveness and reliability of this method, demonstrating that this thermal control strategy not only stabilizes the hydrogen production process but also increases the volume of hydrogen generated. Full article

In this paper, the concept of symmetry is used to design the efficient inference of a fall-detection algorithm for elderly people on embedded processors—that is, there is a symmetric relation between the model’s structure and the memory footprint on the embedded processor. Artificial intelligence (AI) and, more particularly, Long Short-Term Memory (LSTM) neural networks are commonly used in the detection of falls in the elderly population based on acceleration measures. Nevertheless, embedded systems that may be utilized on wearable or wireless sensor networks have a hurdle due to the customarily massive dimensions of those networks. Because of this, the algorithms’ most popular implementation relies on edge or cloud computing, which raises privacy concerns and presents challenges since a lot of data need to be sent via a communication channel. The current work proposes a memory occupancy model for LSTM-type networks to pave the way to more efficient embedded implementations. Also, it offers a sensitivity analysis of the network hyper-parameters through a grid search procedure to refine the LSTM topology network under scrutiny. Lastly, it proposes a new methodology that acts over the quantization granularity for the embedded AI implementation on wearable devices. The extensive simulation results demonstrate the effectiveness and feasibility of the proposed methodology. For the embedded implementation of the LSTM for the fall-detection problem on a wearable platform, one can see that an STM8L low-power processor could support a 40-hidden-cell LSTM network with an accuracy of $96.52\%$. Full article

Credit card fraud detection is a critical challenge in the financial industry, with substantial economic implications. Conventional machine learning (ML) techniques often fail to adapt to evolving fraud patterns and underperform with imbalanced datasets. This study proposes a hybrid deep learning framework that integrates Generative Adversarial Networks (GANs) with Recurrent Neural Networks (RNNs) to enhance fraud detection capabilities. The GAN component generates realistic synthetic fraudulent transactions, addressing data imbalance and enhancing the training set. The discriminator, implemented using various DL architectures, including Simple RNN, Long Short-Term Memory (LSTM) networks, and Gated Recurrent Units (GRUs), is trained to distinguish between real and synthetic transactions and further fine-tuned to classify transactions as fraudulent or legitimate. Experimental results demonstrate significant improvements over traditional methods, with the GAN-GRU model achieving a sensitivity of 0.992 and specificity of 1.000 on the European credit card dataset. This work highlights the potential of GANs combined with deep learning architectures to provide a more effective and adaptable solution for credit card fraud detection. Full article

Machine learning (ML) revolutionized traditional machine fault detection and identification (FDI), as complex-structured models with well-designed unsupervised learning strategies can detect abnormal patterns from abundant data, which significantly reduces the total cost of ownership. However, their opaqueness raised human concern and intrigued the eXplainable artificial intelligence (XAI) concept. Furthermore, the development of ML-based FDI models can be improved fundamentally with machine learning operations (MLOps) guidelines, enhancing reproducibility and operational quality. This study proposes a framework for the continuous development of ML-based FDI solutions, which contains a general structure to simultaneously visualize and check the performance of the ML model while directing the resource-efficient development process. A use case is conducted on sensor data of a hydraulic system with a simple long short-term memory (LSTM) network. Proposed XAI principles and tools supported the model engineering and monitoring, while additional system optimization can be made regarding input data preparation, feature selection, and model usage. Suggested MLOps principles help developers create a minimum viable solution and involve it in a continuous improvement loop. The promising result motivates further adoption of XAI and MLOps while endorsing the generalization of modern ML-based FDI applications with the HITL concept. Full article

Photovoltaic power generation is influenced not only by variable environmental factors, such as solar radiation, temperature, and humidity, but also by the condition of equipment, including solar modules and inverters. In order to preserve energy production, it is essential to maintain and operate the equipment in optimal condition, which makes it crucial to determine the condition of the equipment in advance. This paper proposes a method of determining a degradation of efficiency by focusing on photovoltaic equipment, especially inverters, using LSTM (Long Short-Term Memory) for maintenance. The deterioration in the efficiency of the inverter is set based on the power generation predicted through the LSTM model. To this end, a correlation analysis and a linear analysis were performed between the power generation data collected at the power plant to learn the power generation prediction model and the data collected by the environmental sensor. With this analysis, a model was trained using solar radiation data and power data that are highly correlated with power generation. The results of the evaluation of the model’s performance show that it achieves a MAPE of 7.36, an RMSE of 27.91, a MAE of 18.43, and an R2 of 0.97. The verified model is applied to the power generation data of the selected inverters for the years 2020, 2021, and 2022. Through statistical analysis, it was determined that the error rate in 2022, the third year of its operation, increased by 159.55W on average from the error rate of the power generation forecast in 2020, the first year of operation. This indicates a 0.75% decrease in the inverter’s efficiency compared to the inverter’s power generation capacity. Therefore, it is judged that it can be applied effectively to analyses of inverter efficiency in the operation of photovoltaic plants. Full article

This paper investigates the feasibility of cross-domain recognition for human activities captured using low-resolution 8 × 8 infrared sensors in indoor environments. To achieve this, a novel prototype recurrent convolutional network (PRCN) was evaluated using a few-shot learning strategy, classifying up to eleven activity classes in scenarios where one or two individuals engaged in daily tasks. The model was tested on two independent datasets, with real-world measurements. Initially, three different networks were compared as feature extractors within the prototype network. Following this, a cross-domain evaluation was conducted between the real datasets. The results demonstrated the model’s effectiveness, showing that it performed well regardless of the diversity of samples in the training dataset. Full article

This study aims to improve vessel trajectory prediction in the inner harbor of Busan Port using Automatic Identification System (AIS) data and deep-learning techniques. The research addresses the challenge of irregular AIS data intervals through linear interpolation and focuses on enhancing the accuracy of predictions in complex port environments. Recurrent neural network (RNN), Long Short-Term Memory (LSTM), Bidirectional LSTM, Gated Recurrent Unit (GRU), and Bidirectional GRU models were developed, with LSTM delivering the highest performance. The primary scientific question of this study is how to reliably predict vessel trajectories under varying conditions in inner harbors. The results demonstrate that the proposed method not only improves the precision of predictions but also identifies critical areas where Vessel Traffic Service Operators (VTSOs) can better manage vessel movements. These findings contribute to safer and more efficient vessel traffic management in ports with high traffic density and complex navigational challenges. Full article

Thermal videos provide a privacy-preserving yet information-rich data source for remote health monitoring, especially for respiration rate (RR) estimation. This paper introduces an end-to-end deep learning approach to RR measurement using thermal video data. A detection transformer (DeTr) first finds the subject’s facial region of interest in each thermal frame. A respiratory signal is estimated from a dynamically cropped thermal video using 3D convolutional neural networks and bi-directional long short-term memory stages. To account for the expected phase shift between the respiration measured using a respiratory effort belt vs. a facial video, a novel loss function based on negative maximum cross-correlation and absolute frequency peak difference was introduced. Thermal recordings from 22 subjects, with simultaneous gold standard respiratory effort measurements, were studied while sitting or standing, both with and without a face mask. The RR estimation results showed that our proposed method outperformed existing models, achieving an error of only 1.6 breaths per minute across the four conditions. The proposed method sets a new State-of-the-Art for RR estimation accuracy, while still permitting real-time RR estimation. Full article

The forecasting of hydrological flows (rainfall depth or rainfall discharge) is becoming increasingly important in the management of hydrological risks such as floods. In this study, the Long Short-Term Memory (LSTM) network, a state-of-the-art algorithm dedicated to time series, is applied to predict the daily water level of Lake Nokoué in Benin. This paper aims to provide an effective and reliable method to enable the reproduction of the future daily water level of Lake Nokoué, which is influenced by a combination of two phenomena: rainfall and river flow (runoff from the Ouémé River, the Sô River, the Porto-Novo lagoon, and the Atlantic Ocean). Performance analysis based on the forecasting horizon indicates that LSTM can predict the water level of Lake Nokoué up to a forecast horizon of t + 10 days. Performance metrics such as Root Mean Square Error (RMSE), coefficient of correlation (R²), Nash–Sutcliffe Efficiency (NSE), and Mean Absolute Error (MAE) agree on a forecast horizon of up to t + 3 days. The values of these metrics remain stable for forecast horizons of t + 1 day, t + 2 days, and t + 3 days. The values of R² and NSE are greater than 0.97 during the training and testing phases in the Lake Nokoué basin. Based on the evaluation indices used to assess the model’s performance for the appropriate forecast horizon of water level in the Lake Nokoué basin, the forecast horizon of t + 3 days is chosen for predicting future daily water levels. Full article

The widespread use of technology has led to a transformation of human behaviors and habits into the digital space; and generating extensive data plays a crucial role when coupled with forecasting techniques in guiding marketing decision-makers and shaping strategic choices. Traditional methods like autoregressive moving average (ARMA) can-not be used at predicting individual behaviors because we can-not create models for each individual and buy till you die (BTYD) models have limitations in capturing the trends accurately. Recognizing the paramount importance of individual-level predictions, this study proposes a deep learning framework, specifically uses gated recurrent unit (GRU), for enhanced behavior analysis. This article discusses the performance of GRU and long short-term memory (LSTM) models in this framework for forecasting future individual behaviors and presenting a comparative analysis against benchmark BTYD models. GRU and LSTM yielded the best results in capturing the trends, with GRU demonstrating a slightly superior performance compared to LSTM. However, there is still significant room for improvement at the individual level. The findings not only demonstrate the performance of GRU and LSTM models but also provide valuable insights into the potential of new techniques or approaches for understanding and predicting individual behaviors. Full article

Climate change is one of the trending terms in the world nowadays due to its profound impact on human health and activity. Extreme drought events and desertification are some of the results of climate change. This study utilized the power of AI tools by using the long short-term memory (LSTM) model to predict the drought index for Anbar Province, Iraq. The data from the standardized precipitation evapotranspiration index (SPEI) for 118 years have been used for the current study. The proposed model employed seven different optimizers to enhance the prediction performance. Based on different performance indicators, the results show that the RMSprop and Adamax optimizers achieved the highest accuracy (90.93% and 90.61%, respectively). Additionally, the models forecasted the next 40 years of the SPEI for the study area, where all the models showed an upward trend in the SPEI. In contrast, the best models expected no increase in the severity of drought. This research highlights the vital role of machine learning models and remote sensing in drought forecasting and the significance of these applications by providing accurate climate data for better water resources management, especially in arid regions like that of Anbar province. Full article

The transportation industry is one of the major sources of energy consumption and CO₂ emissions, and these emissions have been increasing year by year. Vehicle exhaust emissions have had serious impacts on air quality and global climate change, with CO₂ emissions being one of the primary causes of global warming. In order to accurately predict the CO₂ emission level of automobiles, an MSCL-Attention model based on a multi-scale convolutional neural network, long short-term memory network and multi-head self-attention mechanism is proposed in this study. By combining multi-scale feature extraction, temporal sequence dependency processing, and the self-attention mechanism, the model enhances the prediction accuracy and robustness. In our experiments, the MSCL-Attention model is benchmarked against the latest state-of-the-art models in the field. The results indicate that the MSCL-Attention model demonstrates superior performance in the task of CO₂ emission prediction, surpassing the leading models currently available. This study provides a new method for predicting vehicle exhaust emissions, with significant application prospects, and is expected to contribute to reducing global vehicle emissions, improving air quality, and addressing climate change. Full article