The aim of the present investigation was to compare the in vitro bacterial retention on saliva-coated implant materials (pure titanium grade 2 (cp-Ti) and a titanium alloy (Ti-6Al-4V) surfaces), presenting similar surface roughness, and to assess the influence of physico-chemical surface properties of bacterial strain and implant materials on in vitro bacterial adherence. Two bacterial strains (one hydrophilic strain and one hydrophobic strain) were used and the following were evaluated: bacterial cell adherence, SFE values as well as the Lifshitz-van-der Waals, the Lewis acid base components of SFE, the interfacial free energy and the non-dispersive interactions according to two complementary contact angle measurement methods: the sessile drop method and the captive bubble method. Our results showed similar patterns of adherent bacterial cells on saliva-coated cp-Ti and saliva-coated Ti-6Al-4V. These findings could suggest that bacterial colonization (i.e. plaque formation) is similar on saliva-coated cp-Ti and Ti-6Al-4V surfaces and indicate that both materials could be suitable for use as transgingival abutment or healing implant components. The same physico-chemical properties exhibited by saliva-coated cp-Ti and TA6V, as shown by the sessile drop method and the captive bubble method, could explain this similar bacterial colonisation. Therefore, higher values of total surface free energy of saliva-coated cp-Ti and saliva-coated TA6V samples (gamma(SV) approximately 65mJ/m(2)) were reported using the captive bubble method indicating a less hydrophobic character of these surfaces than with the sessile drop method (gamma(S) approximately 44.50mJ/m(2)) and consequently possible differences in oral bacterial retention according the theory described by Absolom et al. The number of adherent hydrophobic S. sanguinis cells was two-fold higher than that of hydrophilic S. constellatus cells. Our results confirm that physico-chemical surface properties of oral bacterial strains play a role in bacterial retention to implant materials in the presence of adsorbed salivary proteins.