New developments in dual energy X-ray absorptiometry (DEXA) imaging technology [fan beam and cone beam (CB)] result in higher exposure levels, shorter scan times, increased patient throughput and increased shielding requirements. This study presents the results of a European survey detailing the number and location of DEXA systems in SENTINEL partner states and the QA (quality assurance) currently performed by physicists and operators in these centres. The results of a DEXA equipment survey based on an in-house developed QA protocol are presented. Measurements show that the total effective dose to the patient from a spine and dual femur DEXA examination on the latest generation DEXA systems is comparable with a few microSv at most. Scatter measurements showed that the use of a mobile lead screen for staff protection was necessary for fan and CB systems. Scattered dose from newer generation systems may also exceed the exposure limits for the general public so structural shielding may also be required. Considerable variation in the magnitude and annual repeatability of half value layer was noted between different models of DEXA scanners. A comparative study of BMD (bone mineral density) accuracy using the European Spine Phantom highlighted a deviation of up to 7% in BMD values between scanners of different manufacturers.