The basic objective in total knee arthroplasty is to achieve the correct amount of femoral component rotation, and this can be achieved either with a measured resection technique or indirectly with a flexion/extension gap equalization technique. We studied variability in the reference axes (posterior condylar axis, Whiteside's line, transepicondylar axis) when soft tissue tension was managed intraoperatively using a navigation system. The mean angles for the transepicondylar line, Whiteside's line, and the posterior condylar line from the proximal tibia resection plane were 1.29 degrees +/- 3.67 degrees (mean +/- SD; range, -7 degrees to 10.5 degrees), 3.90 degrees +/- 4.17 degrees (mean +/- SD; range, -3 degrees to 15.5 degrees), and -4.03 degrees +/- 2.71 degrees (mean +/- SD; range, -9.5 degrees to 1.0 degrees), respectively. The coefficients of variation (SD/mean x100) for these 3 variables were 283%, 106%, and 67%, respectively. Of the 3 reference axes used widely for femoral component rotation, the angles from the posterior condylar line to the proximal tibia resection plane showed the smallest range of variance.
2010 Elsevier Inc. All rights reserved.