Although reverse osmosis (RO) has been widely used in the recycling of metal plating wastewater, organic compounds and heavy metals in the RO concentrate are difficult to remove by conventional treatment. A combination process including Fenton oxidation and a biological aerated filter was used to treat RO concentrate containing complex Cu and Ni from metal plating. During the Fenton treatment, Cu and Ni ions were released due to degradation of organic compounds and then removed by pH adjustment and coagulation. The concentrate was further treated using by a biological aerated filter. Optimum conditions were as follows: initial pH of influent of 4.0; dosage of H2O2 of 5.0 mmol l(-1); ratio of n(Fe2+)/n(H2O2) of 0.8; precipitation pH of Cu and Ni ions of 8.0; and a hydraulic retention time of the biological aerated filter of 2.5 h. The results showed that concentrations of effluent COD, Cu and Ni ions were less than 40 mg l(-1), 0.5 mg l(-1) and 0.3 mg l(-1), respectively; this means the treated effluent meets the emission standards for pollutants from electroplating set by China's Environmental Protection Agency.