Enhanced power production of a membrane electrode assembly microbial fuel cell (MFC) using a cost effective poly [2,5-benzimidazole] (ABPBI) impregnated non-woven fabric filter

A membrane electrode assembly (MEA) microbial fuel cell (MFC) with a non-woven paper fabric filter (NWF) was investigated as an alternative to a proton exchange membrane (PEM) separator. The MFC with a NWF generated a cell voltage of 545 mV and a maximum power density of 1027 mW/m(3), which was comparable to that obtained from MFCs with a PEM (551 mV, 609 mW/m(3)). The MFC with a NWF showed stable cell performance (550 mV) over 300 days, whereas, the MFC with PEM performance decreased significantly from 551 mV to 415 mV due to biofilm formation and chemical precipitation on the membrane surface. Poly [2,5-benzimidazole] (ABPBI) was evaluated with respect to its capacity to increased proton conductivity and contact between separator and electrodes. The overall performance of the MFC with ABPBI was improved by enhancing the ion conductivity and steric contact, producing 766 mW/m(3) at optimum loading of 50 mg ABPBI/cm(2).