Effect of multi-purpose primers on the bond durability between tri-n-butylborane initiated resin and gold alloy

Purpose: This study investigated the influence of an interaction between sulfur-containing monomers and other monomers in multipurpose primers on the bond durability of a tri-n-butylborane (TBB)-initiated acrylic resin to a gold alloy.

Methods: The disk-shaped adherend materials were prepared from a gold alloy (Casting Gold M.C. Type IV). Two multipurpose-primers (Universal Primer, Monobond Plus), four metal primers containing an organic sulfur compound (M.L. Primer, Alloy Primer, Metaltite, and V-Primer), and three acidic primers (Estenia Opaque Primer, Acryl Bond, and Super-Bond Liquid) were used. The shear bond strengths were determined pre- and post-thermocycling to evaluate the bond durability. A statistical analysis of the results was performed using a non-parametric procedure, and the cohesive failure ratios of the debonded surfaces were compared.

Results: Among the pre-thermocycling groups, M.L. Primer, Metaltite, Monobond Plus, Universal Primer, and Alloy Primer showed the greatest bond strengths. Among the post-thermocycling groups, M.L. Primer, Metaltite, Monobond Plus, and Universal Primer showed the greatest bond strengths, whereas Acryl Bond, Super-Bond Liquid, Estenia Opaque Primer, and the unprimed control showed the lowest. Similarly, the primers that did not contain either a sulfur compound showed an obvious reduction in the cohesive failure ratio.

Conclusions: Multi-purpose primers containing a sulfur-containing monomer increased the bond strength of a TBB-initiated acrylic resin to a gold alloy. The proportion of the area of cohesive failure to the bonded area showed an interrelationship with the shear bond strength testing results.