Ultraviolet Photoactivated Room Temperature NO₂ Gas Sensor of ZnO Hemitubes and Nanotubes Covered with TiO₂ Nanoparticles

Prolonged exposure to NO₂ can cause lung tissue inflammation, bronchiolitis fibrosa obliterans, and silo filler's disease. In recent years, nanostructured semiconducting metal oxides have been widely used to fabricate gas sensors because of their unique structure and surface-to-volume ratio compared to layered materials. In particular, the different morphologies of ZnO-based nanostructures significantly affect the detection property of NO₂ gas sensors. However, because of the large interaction energy of chemisorption (1-10 eV), metal oxide-based gas sensors are typically operated above 100 °C, overcoming the energy limits to attain high sensitivity and fast reaction. High operating temperature negatively affects the reliability and durability of semiconductor-based sensors; at high temperature, the diffusion and sintering effects at the metal oxide grain boundaries are major factors causing undesirable long-term drift problems and preventing stability improvements. Therefore, we demonstrate NO₂ gas sensors consisting of ZnO hemitubes (HTs) and nanotubes (NTs) covered with TiO₂ nanoparticles (NPs). To operate the gas sensor at room temperature (RT), we measured the gas-sensing properties with ultraviolet illumination onto the active region of the gas sensor for photoactivation instead of conventional thermal activation by heating. The performance of these gas sensors was enhanced by the change of barrier potential at the ZnO/TiO₂ interfaces, and their depletion layer was expanded by the NPs formation. The gas sensor based on ZnO HTs showed 1.2 times higher detection property than those consisting of ZnO NTs at the 25 ppm NO₂ gas.