Near-infrared photodetectors (NIR-PDs) are widely used in communications, biomedical imaging, and national defense. Here we report a new strategy to prepare a short wavelength light filter based NIR-PDs by introducing an interface layer between the perovskite layer and the polymer layer to achieve the selective passage of carriers. Through the synergistic effect of the perovskite and the interface layer, the short wavelength light component in the signal spectrum is effectively filtered out. The organic polymer layer with a bulk heterojunction structure is applied to realize the absorption and conversion of near-infrared light. The prepared device achieves a maximum external quantum efficiency of 83.7% without bias, a high specific detectivity of 1.52 × 1013 Jones, an NIR responsivity of 0.577A/W, and a short response time of 1.73/0.97 μs within the detection range from 770 to 900 nm. All these properties show great advantages compared with other perovskite/polymer hybrid NIR photodetectors that have been reported. This innovative strategy provides a new way to prepare high-performance near-infrared photodetectors.
Keywords: blocking layer; interface layer; narrowband; near-infrared; perovskite/polymer; photodetectors.