Pyrolysis temperature influences the capacity of biochar to immobilize copper and arsenic in mining soil remediation

Biochar is a promising material used for multiple remediation approaches, mainly in polluted soils. Its properties can differ depending on feedstock and pyrolysis temperature. In this context, we tested the capacity of three biochar products made from corncob, pyrolyzed at different temperatures (350, 500, and 650 °C), to remediate a mining soil affected by high levels of Cu and As. We performed an exhaustive characterization of the biochar. We found that biochar showed a higher surface area with increasing pyrolysis temperature, whereas high molecular weight PAHs were detected in biochar produced at the maximum temperature, thus indicating potential ecotoxicological risks. After the application of biochar to the soil, Cu was partially immobilized, especially when using that obtained at 500 °C. This effect is attributed to the structure of this material and an increase in soil pH and organic matter content. Conversely, As was increased in the soluble fraction for all three types of biochar but in a proportion that lacks relevance. On the whole, given its lower PAH content, higher Cu immobilization ratio, and an almost negligible increase in As availability, biochar obtained at 500 °C outperformed the other two products with respect to soil recovery. Of note, data on Cu and As availability were doubled-checked using two extraction methodologies. We propose that this operational approach for determining the most suitable pyrolysis temperature will find application in other soil remediation actions.