Paper-Based Microfluidic Analytical Device Patterned by Label Printer for Point-of-Care Blood Glucose and Hematocrit Detection Using 3D-Printed Smartphone Cassette

Sensors (Basel). 2024 Jul 24;24(15):4792. doi: 10.3390/s24154792.

Abstract

This study presents a portable, low-cost, point-of-care (POC) system for the simultaneous detection of blood glucose and hematocrit. The system consists of a disposable origami microfluidic paper-based analytical device (μPAD) for plasma separation, filtration, and reaction functions and a 3D-printed cassette for hematocrit and blood glucose detection using a smartphone. The origami μPAD is patterned using a cost-effective label printing technique instead of the conventional wax printing method. The 3D-printed cassette incorporates an array of LED lights, which mitigates the effects of intensity variations in the ambient light and hence improves the accuracy of the blood glucose and hematocrit concentration measurements. The hematocrit concentration is determined quantitatively by measuring the distance of plasma wicking along the upper layer of the origami μPAD, which is pretreated with sodium chloride and Tween 20 to induce dehydration and aggregation of the red blood cells. The filtered plasma also penetrates to the lower layer of the origami μPAD, where it reacts with embedded colorimetric assay reagents to produce a yellowish-brown complex. A color image of the reaction complex is captured using a smartphone inserted into the 3D-printed cassette. The image is analyzed using self-written RGB software to quantify the blood glucose concentration. The calibration results indicate that the proposed detection platform provides an accurate assessment of the blood glucose level over the range of 45-630 mg/dL (R2 = 0.9958). The practical feasibility of the proposed platform is demonstrated by measuring the blood glucose and hematocrit concentrations in 13 human whole blood samples. Taking the measurements obtained from commercial glucose and hematocrit meters as a benchmark, the proposed system has a differential of no more than 6.4% for blood glucose detection and 9.1% for hematocrit detection. Overall, the results confirm that the proposed μPAD is a promising solution for cost-effective and reliable POC health monitoring.

Keywords: glucose; hematocrit; label printing; microfluidic; paper-based device; point-of-care; smartphone.

MeSH terms

  • Blood Glucose* / analysis
  • Colorimetry / instrumentation
  • Colorimetry / methods
  • Hematocrit
  • Humans
  • Lab-On-A-Chip Devices
  • Microfluidic Analytical Techniques / instrumentation
  • Microfluidic Analytical Techniques / methods
  • Paper*
  • Point-of-Care Systems*
  • Printing, Three-Dimensional*
  • Smartphone*

Substances

  • Blood Glucose

Grants and funding

This study was supported by the National Science and Technology Council of Taiwan under Grant No. NSTC 113-2221-E-150-012-MY2 and National Taiwan University Hospital Yunlin Branch under Grant No. NTUHYL113.C012.