Simultaneous carbon, nitrogen and phosphorus removal in sequencing batch membrane aerated biofilm reactor with biofilm thickness control via air scouring aided by computational fluid dynamics

Bioresour Technol. 2024 Oct:409:131267. doi: 10.1016/j.biortech.2024.131267. Epub 2024 Aug 12.

Abstract

Membrane aerated biofilm reactor (MABR) is challenged by biofilm thickness control and phosphorus removal. Air scouring aided by computational fluid dynamics (CFD) was employed to detach outer biofilm in sequencing batch MABR treating low C/N wastewater. Biofilm with 177-285 µm thickness in cycle 5-15 achieved over 85 % chemical oxygen demand (COD) and total inorganic nitrogen (TIN) removals at loading rate of 13.2 gCOD/m2/d and 2.64 gNH4+-N/m2/d. Biofilm rheology measurements in cycle 10-25 showed yield stress against detachment of 2.8-7.4 Pa, which were equal to CFD calculated shear stresses under air scouring flowrate of 3-9 L/min. Air scouring reduced effluent NH4+-N by 10 % and biofilm thickness by 78 µm. Intermittent aeration (4h off, 19.5h on) and air scouring (3 L/min, 30 s before settling) in one cycle achieved COD removal over 90 %, TIN and PO43--P removals over 80 %, showing great potential for simultaneous carbon, nitrogen and phosphorus removals.

Keywords: Biofilm density; Biofilm detachment; Biological phosphorus removal; Counter-diffusion biofilm; Gas-liquid two-phase flow; Simultaneous nitrification and denitrification.

MeSH terms

  • Air
  • Biofilms*
  • Biological Oxygen Demand Analysis
  • Bioreactors*
  • Carbon*
  • Computer Simulation
  • Hydrodynamics*
  • Membranes, Artificial*
  • Nitrogen*
  • Phosphorus*
  • Rheology
  • Wastewater / chemistry
  • Water Purification / methods

Substances

  • Nitrogen
  • Phosphorus
  • Carbon
  • Membranes, Artificial
  • Wastewater