Nickel removal from synthetic wastewater by novel zeolite-doped magnesium- iron- and zinc-oxide nanocomposites by hydrothermal-calcination technique

Rashad Al-Gaashani; Haya Alyasi; Fatima Karamshahi; Simjo Simson; Yongfeng Tongb; Viktor Kochkodan; Jenny Lawler

doi:10.1038/s41598-024-81947-1

Nickel removal from synthetic wastewater by novel zeolite-doped magnesium- iron- and zinc-oxide nanocomposites by hydrothermal-calcination technique

Sci Rep. 2024 Dec 28;14(1):30954. doi: 10.1038/s41598-024-81947-1.

Authors

Rashad Al-Gaashani¹, Haya Alyasi², Fatima Karamshahi³, Simjo Simson², Yongfeng Tongb⁴, Viktor Kochkodan², Jenny Lawler²

Affiliations

¹ Qatar Environment and Energy Research Institute (QEERI), Hamad Bin Khalifa University (HBKU), Qatar Foundation, Doha, 34110, Qatar. [email protected].
² Qatar Environment and Energy Research Institute (QEERI), Hamad Bin Khalifa University (HBKU), Qatar Foundation, Doha, 34110, Qatar.
³ Department of Chemistry and Earth Sciences, College of Arts and Sciences, Qatar University, Doha, 2713, Qatar.
⁴ HBKU Core Labs, Hamad Bin Khalifa University, Qatar Foundation, Doha, Qatar.

Abstract

This study aims to modify raw zeolite with metal oxide nanocomposites to remove nickel (Ni) ions from synthetic wastewater. Novel zeolite-doped magnesium oxide (MgO), iron oxide (Fe₃O₄), and zinc oxide (ZnO) nanocomposites were synthesized by hydrothermal-calcination methods. The novel zeolite-doped metal oxide nanocomposites were used as adsorbents to remove Ni (II) ions from synthetic wastewater. Several advanced techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometer (VSM) were applied to study the structural, morphological, chemical, and magnetic properties of the prepared materials. Doped zeolite with ZnO, MgO, and Fe₃O₄ significantly enhances the removal of Ni (II) ions from synthetic wastewater. The zeolite-doped MgO + Fe₃O₄ + ZnO sample achieved a Ni (II) ions removal efficiency of 99.6%, compared to 58.9% for raw zeolites. The removal efficiencies of Ni (II) ions (Ci = 30 mg/L) from highest to lowest were 99.56%, 99.53%, 91.4%, 67.8%, and 58.93% by zeolite-doped MgO + Fe₃O₄ + ZnO, zeolite-doped MgO, zeolite-doped ZnO, zeolite-doped Fe₃O₄, and raw zeolite sample, respectively. The highest adsorption capacity was 17.13 mg/g of zeolite-doped MgO + Fe₃O₄ + ZnO samples. The experimental adsorption data collected were fitted using five isotherm models, and four kinetic models. The Langmuir adsorption isotherm model and the pseudo-second-order kinetic model provided the best fit for the experimental adsorption data. This suggests that the adsorption process is complex, possibly involving electron interactions between the active sites of doped zeolite and Ni (II) species. The obtained data indicates that zeolite-doped with MgO, Fe₃O_4, and ZnO notably enhances the adsorptive properties of Ni (II) from synthetic wastewater. The obtained thermodynamic values confirmed that the adsorption process is spontaneous and endothermic, with increased randomness at the solid-solution interface during the adsorption process.