Objectives: The purpose of this study was to measure the stress relaxation behavior at elevated temperatures of three experimental opaque porcelains and three experimental body porcelains.
Methods: Feldspathic porcelain formulations covering a range of thermal contraction coefficients were supplied by a dental ceramics manufacturer. Six specimens, 11 mm in diameter by 22 mm long, were fabricated for each porcelain. The specimens were tested in compression at five temperatures controlled to +/- 1 degree C in a hot stage furnace attached to a screw-type uni-axial testing machine.
Results: Mean values of relaxation time, tau u, and the b function were determined by a regression fit to the relation: psi (t) = exp [-(t/tau u)b]. Values of b ranged from 0.23 to 0.53 for opaque porcelain and 0.47 to 0.64 for body porcelain. Relaxation times ranged from 2.6 s to 4 x 10(4) s for the opaque porcelains and 1.5 s to 5.5 x 10(2) s for the body porcelains. A statistically significant variation of b with temperature for three of the experimental porcelains is an indication that these porcelains do not satisfy the theoretical requirements for the porcelains to be classified as thermorheologically simple.
Significance: A knowledge of the relaxation behavior of dental porcelains is necessary so that dental researchers can identify metal/porcelain combinations that will result in low stress values and, therefore, reduce the potential for failure from thermally induced stresses. These properties can be used in the optimization of prosthesis design to reduce the destruction of healthy tissue to accommodate the placement of the dental prosthesis.