The clinical usefulness of inspiratory flow pattern manipulation during mechanical ventilation remains unclear. The aim of this study was to investigate the effects of different inspiratory flow waveforms, i.e. constant, sinusoidal and decelerating, on arterial blood gases and respiratory mechanics, in mechanically ventilated patients. Eight patients recovering after open heart surgery for valvular replacement and/or coronary bypass were studied. The ventilator inspiratory flow waveform was changed according to a randomized sequence, keeping constant the other variables of the ventilator settings. We measured arterial blood gases, flow, volume and pressure at the proximal (airway opening pressure (Pao)) and distal (Ptr) ends of the endotracheal tubes before and after 30 min of mechanical ventilation with each inspiratory flow waveform. We computed breathing pattern, respiratory mechanics (pressures and dynamic elastance) and inspiratory work, which was then partitioned into its elastic and resistive components. We found that: 1) arterial oxygen tension (Pa,O2) and arterial carbon dioxide tension (Pa,CO2) were not affected by changes in the inspiratory flow waveform; and 2) peak Pao and Ptr were highest with sinusoidal inspiratory flow, whilst mean Pao and Ptr and total work of breathing were least with constant inspiratory flow, mainly because of a concomitant decrease in resistive work during constant flow inflation. The effects of the inspiratory flow profile on Pao, Ptr and total inspiratory work performed by the ventilator were mainly due to the resistive properties of the endotracheal tubes. We conclude that the ventilator inspiratory flow waveform can influence patients' respiratory mechanics, but has no impact on arterial oxygen and arterial carbon dioxide tension.