-
Simplified Successive Cancellation List Decoding of PAC Codes
Authors:
Hamid Saber,
Homayoon Hatami,
Jung Hyun Bae
Abstract:
Polar codes are the first class of structured channel codes that achieve the symmetric capacity of binary channels with efficient encoding and decoding. In 2019, Arikan proposed a new polar coding scheme referred to as polarization-adjusted convolutional (PAC)} codes. In contrast to polar codes, PAC codes precode the information word using a convolutional code prior to polar encoding. This results…
▽ More
Polar codes are the first class of structured channel codes that achieve the symmetric capacity of binary channels with efficient encoding and decoding. In 2019, Arikan proposed a new polar coding scheme referred to as polarization-adjusted convolutional (PAC)} codes. In contrast to polar codes, PAC codes precode the information word using a convolutional code prior to polar encoding. This results in material coding gain over polar code under Fano sequential decoding as well as successive cancellation list (SCL) decoding. Given the advantages of SCL decoding over Fano decoding in certain scenarios such as low-SNR regime or where a constraint on the worst case decoding latency exists, in this paper, we focus on SCL decoding and present a simplified SCL (SSCL) decoding algorithm for PAC codes. SSCL decoding of PAC codes reduces the decoding latency by identifying special nodes in the decoding tree and processing them at the intermediate stages of the graph. Our simulation results show that the performance of PAC codes under SSCL decoding is almost similar to the SCL decoding while having lower decoding latency.
△ Less
Submitted 26 January, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Rapid and Scalable Bayesian AB Testing
Authors:
Srivas Chennu,
Andrew Maher,
Christian Pangerl,
Subash Prabanantham,
Jae Hyeon Bae,
Jamie Martin,
Bud Goswami
Abstract:
AB testing aids business operators with their decision making, and is considered the gold standard method for learning from data to improve digital user experiences. However, there is usually a gap between the requirements of practitioners, and the constraints imposed by the statistical hypothesis testing methodologies commonly used for analysis of AB tests. These include the lack of statistical p…
▽ More
AB testing aids business operators with their decision making, and is considered the gold standard method for learning from data to improve digital user experiences. However, there is usually a gap between the requirements of practitioners, and the constraints imposed by the statistical hypothesis testing methodologies commonly used for analysis of AB tests. These include the lack of statistical power in multivariate designs with many factors, correlations between these factors, the need of sequential testing for early stopping, and the inability to pool knowledge from past tests. Here, we propose a solution that applies hierarchical Bayesian estimation to address the above limitations. In comparison to current sequential AB testing methodology, we increase statistical power by exploiting correlations between factors, enabling sequential testing and progressive early stopping, without incurring excessive false positive risk. We also demonstrate how this methodology can be extended to enable the extraction of composite global learnings from past AB tests, to accelerate future tests. We underpin our work with a solid theoretical framework that articulates the value of hierarchical estimation. We demonstrate its utility using both numerical simulations and a large set of real-world AB tests. Together, these results highlight the practical value of our approach for statistical inference in the technology industry.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
ProductAE: Toward Deep Learning Driven Error-Correction Codes of Large Dimensions
Authors:
Mohammad Vahid Jamali,
Hamid Saber,
Homayoon Hatami,
Jung Hyun Bae
Abstract:
While decades of theoretical research have led to the invention of several classes of error-correction codes, the design of such codes is an extremely challenging task, mostly driven by human ingenuity. Recent studies demonstrate that such designs can be effectively automated and accelerated via tools from machine learning (ML), thus enabling ML-driven classes of error-correction codes with promis…
▽ More
While decades of theoretical research have led to the invention of several classes of error-correction codes, the design of such codes is an extremely challenging task, mostly driven by human ingenuity. Recent studies demonstrate that such designs can be effectively automated and accelerated via tools from machine learning (ML), thus enabling ML-driven classes of error-correction codes with promising performance gains compared to classical designs. A fundamental challenge, however, is that it is prohibitively complex, if not impossible, to design and train fully ML-driven encoder and decoder pairs for large code dimensions. In this paper, we propose Product Autoencoder (ProductAE) -- a computationally-efficient family of deep learning driven (encoder, decoder) pairs -- aimed at enabling the training of relatively large codes (both encoder and decoder) with a manageable training complexity. We build upon ideas from classical product codes and propose constructing large neural codes using smaller code components. ProductAE boils down the complex problem of training the encoder and decoder for a large code dimension $k$ and blocklength $n$ to less-complex sub-problems of training encoders and decoders for smaller dimensions and blocklengths. Our training results show successful training of ProductAEs of dimensions as large as $k = 300$ bits with meaningful performance gains compared to state-of-the-art classical and neural designs. Moreover, we demonstrate excellent robustness and adaptivity of ProductAEs to channel models different than the ones used for training.
△ Less
Submitted 18 August, 2024; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Observation of Josephson Harmonics in Tunnel Junctions
Authors:
Dennis Willsch,
Dennis Rieger,
Patrick Winkel,
Madita Willsch,
Christian Dickel,
Jonas Krause,
Yoichi Ando,
Raphaël Lescanne,
Zaki Leghtas,
Nicholas T. Bronn,
Pratiti Deb,
Olivia Lanes,
Zlatko K. Minev,
Benedikt Dennig,
Simon Geisert,
Simon Günzler,
Sören Ihssen,
Patrick Paluch,
Thomas Reisinger,
Roudy Hanna,
Jin Hee Bae,
Peter Schüffelgen,
Detlev Grützmacher,
Luiza Buimaga-Iarinca,
Cristian Morari
, et al. (5 additional authors not shown)
Abstract:
Superconducting quantum processors have a long road ahead to reach fault-tolerant quantum computing. One of the most daunting challenges is taming the numerous microscopic degrees of freedom ubiquitous in solid-state devices. State-of-the-art technologies, including the world's largest quantum processors, employ aluminum oxide (AlO$_x$) tunnel Josephson junctions (JJs) as sources of nonlinearity,…
▽ More
Superconducting quantum processors have a long road ahead to reach fault-tolerant quantum computing. One of the most daunting challenges is taming the numerous microscopic degrees of freedom ubiquitous in solid-state devices. State-of-the-art technologies, including the world's largest quantum processors, employ aluminum oxide (AlO$_x$) tunnel Josephson junctions (JJs) as sources of nonlinearity, assuming an idealized pure $\sin\varphi$ current-phase relation (C$\varphi$R). However, this celebrated $\sin\varphi$ C$\varphi$R is only expected to occur in the limit of vanishingly low-transparency channels in the AlO$_x$ barrier. Here we show that the standard C$\varphi$R fails to accurately describe the energy spectra of transmon artificial atoms across various samples and laboratories. Instead, a mesoscopic model of tunneling through an inhomogeneous AlO$_x$ barrier predicts %-level contributions from higher Josephson harmonics. By including these in the transmon Hamiltonian, we obtain orders of magnitude better agreement between the computed and measured energy spectra. The reality of Josephson harmonics transforms qubit design and prompts a reevaluation of models for quantum gates and readout, parametric amplification and mixing, Floquet qubits, protected Josephson qubits, etc. As an example, we show that engineered Josephson harmonics can reduce the charge dispersion and the associated errors in transmon qubits by an order of magnitude, while preserving anharmonicity.
△ Less
Submitted 22 August, 2023; v1 submitted 17 February, 2023;
originally announced February 2023.
-
Development of deep biological ages aware of morbidity and mortality based on unsupervised and semi-supervised deep learning approaches
Authors:
Seong-Eun Moon,
Ji Won Yoon,
Shinyoung Joo,
Yoohyung Kim,
Jae Hyun Bae,
Seokho Yoon,
Haanju Yoo,
Young Min Cho
Abstract:
Background: While deep learning technology, which has the capability of obtaining latent representations based on large-scale data, can be a potential solution for the discovery of a novel aging biomarker, existing deep learning methods for biological age estimation usually depend on chronological ages and lack of consideration of mortality and morbidity that are the most significant outcomes of a…
▽ More
Background: While deep learning technology, which has the capability of obtaining latent representations based on large-scale data, can be a potential solution for the discovery of a novel aging biomarker, existing deep learning methods for biological age estimation usually depend on chronological ages and lack of consideration of mortality and morbidity that are the most significant outcomes of aging. Methods: This paper proposes a novel deep learning model to learn latent representations of biological aging in regard to subjects' morbidity and mortality. The model utilizes health check-up data in addition to morbidity and mortality information to learn the complex relationships between aging and measured clinical attributes. Findings: The proposed model is evaluated on a large dataset of general populations compared with KDM and other learning-based models. Results demonstrate that biological ages obtained by the proposed model have superior discriminability of subjects' morbidity and mortality.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
On the correlation between dark matter, intracluster light and globular cluster distribution in SMACS0723
Authors:
J. M. Diego,
M. Pascale,
B. Frye,
A. Zitrin,
T. Broadhurst,
G. Mahler,
G. B. Caminha,
M. Jauzac,
Myung Gyoon Lee,
Jang Ho Bae,
In Sung Jang,
Mireia Montes
Abstract:
We present a free-form model of SMACS0723, the first cluster observed with JWST. This model makes no strong assumptions about the distribution of mass (mostly dark matter) in the cluster and we use it to study the possible correlation between dark matter with the intracluster light and distribution of globular clusters. To explore the uncertainty in mass modelling, we derive three lens models base…
▽ More
We present a free-form model of SMACS0723, the first cluster observed with JWST. This model makes no strong assumptions about the distribution of mass (mostly dark matter) in the cluster and we use it to study the possible correlation between dark matter with the intracluster light and distribution of globular clusters. To explore the uncertainty in mass modelling, we derive three lens models based on spectroscopically confirmed systems and new candidate systems with redshifts predicted by the lens model derived from the spectroscopic systems.
We find that beyond the radius of influence of the BCG, the total mass does not trace the ICL, implying the need for a dark component (dark matter). Two loop-like structures observed in the intracluster light do not have an obvious correspondence with the total mass (mostly dark matter) distribution. The radial profiles of the ICL and the distribution of globular clusters are similar to each other, but steeper than the profile of the lens model. More specifically, we find that the total mass is shallower by 1 dex in log scale than both ICL and globular cluster profiles. This is in excellent agreement with N-body simulations of cold dark matter.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
Detection of Intracluster Globular Clusters in the First JWST Images of the Gravitational Lens Cluster SMACS J0723.3-7327 at z = 0.39
Authors:
Myung Gyoon Lee,
Jang Ho Bae,
In Sung Jang
Abstract:
We present a survey of globular clusters (GCs) in the massive gravitational lens cluster SMACS J0723.3-7327 at $z=0.39$ based on the early released JWST/NIRCam images. In the color-magnitude diagrams of the point sources we find clearly a rich population of intracluster GCs that spread in a wide area of the cluster. Their ages, considering the cluster redshift, are younger than 9.5 Gyr. The F200W…
▽ More
We present a survey of globular clusters (GCs) in the massive gravitational lens cluster SMACS J0723.3-7327 at $z=0.39$ based on the early released JWST/NIRCam images. In the color-magnitude diagrams of the point sources we find clearly a rich population of intracluster GCs that spread in a wide area of the cluster. Their ages, considering the cluster redshift, are younger than 9.5 Gyr. The F200W (AB) magnitudes of these GCs, $26.5<{F200W_0} <29.5$ mag, correspond to $-15.2<{M_{F200W}} <-12.2$ mag, showing that they belong to the brightest GCs (including ultracompact dwarfs). The spatial distributions of these GCs show a megaparsec-scale structure elongated along the major axis of the brightest cluster galaxy. In addition, they show a large number of substructures, some of which are consistent with the substructures seen in the map of diffuse intracluster light. The GC number density map is, in general, consistent with the dark matter mass density map based on the strong lensing analysis in the literature. The radial number density profile of the GCs in the outer region is steeper than the dark matter mass profile obtained from lensing models. These results are consistent with those for the GCs found in the deep HST images of Abell 2744, another massive cluster at $z=0.308$, and in simulated galaxy clusters. This shows that the intracluster GCs are an excellent independent tool to probe the dark matter distribution in galaxy clusters as well as to reveal the cluster assembly history in the JWST era.
△ Less
Submitted 12 October, 2022; v1 submitted 9 August, 2022;
originally announced August 2022.
-
List Autoencoder: Towards Deep Learning Based Reliable Transmission Over Noisy Channels
Authors:
Hamid Saber,
Homayoon Hatami,
Jung Hyun Bae
Abstract:
In this paper, we present list autoencoder (listAE) to mimic list decoding used in classical coding theory. With listAE, the decoder network outputs a list of decoded message word candidates. To train the listAE, a genie is assumed to be available at the output of the decoder. A specific loss function is proposed to optimize the performance of a genie-aided (GA) list decoding. The listAE is a gene…
▽ More
In this paper, we present list autoencoder (listAE) to mimic list decoding used in classical coding theory. With listAE, the decoder network outputs a list of decoded message word candidates. To train the listAE, a genie is assumed to be available at the output of the decoder. A specific loss function is proposed to optimize the performance of a genie-aided (GA) list decoding. The listAE is a general framework and can be used with any AE architecture. We propose a specific architecture, referred to as incremental-redundancy AE (IR-AE), which decodes the received word on a sequence of component codes with non-increasing rates. Then, the listAE is trained and evaluated with both IR-AE and Turbo-AE. Finally, we employ cyclic redundancy check (CRC) codes to replace the genie at the decoder output and obtain a CRC aided (CA) list decoder. Our simulation results show that the IR-AE under CA list decoding demonstrates meaningful coding gain over Turbo-AE and polar code at low block error rates range.
△ Less
Submitted 2 August, 2022; v1 submitted 18 December, 2021;
originally announced December 2021.
-
ProductAE: Towards Training Larger Channel Codes based on Neural Product Codes
Authors:
Mohammad Vahid Jamali,
Hamid Saber,
Homayoon Hatami,
Jung Hyun Bae
Abstract:
There have been significant research activities in recent years to automate the design of channel encoders and decoders via deep learning. Due the dimensionality challenge in channel coding, it is prohibitively complex to design and train relatively large neural channel codes via deep learning techniques. Consequently, most of the results in the literature are limited to relatively short codes hav…
▽ More
There have been significant research activities in recent years to automate the design of channel encoders and decoders via deep learning. Due the dimensionality challenge in channel coding, it is prohibitively complex to design and train relatively large neural channel codes via deep learning techniques. Consequently, most of the results in the literature are limited to relatively short codes having less than 100 information bits. In this paper, we construct ProductAEs, a computationally efficient family of deep-learning driven (encoder, decoder) pairs, that aim at enabling the training of relatively large channel codes (both encoders and decoders) with a manageable training complexity. We build upon the ideas from classical product codes, and propose constructing large neural codes using smaller code components. More specifically, instead of directly training the encoder and decoder for a large neural code of dimension $k$ and blocklength $n$, we provide a framework that requires training neural encoders and decoders for the code parameters $(n_1,k_1)$ and $(n_2,k_2)$ such that $n_1 n_2=n$ and $k_1 k_2=k$. Our training results show significant gains, over all ranges of signal-to-noise ratio (SNR), for a code of parameters $(225,100)$ and a moderate-length code of parameters $(441,196)$, over polar codes under successive cancellation (SC) decoder. Moreover, our results demonstrate meaningful gains over Turbo Autoencoder (TurboAE) and state-of-the-art classical codes. This is the first work to design product autoencoders and a pioneering work on training large channel codes.
△ Less
Submitted 10 September, 2022; v1 submitted 9 October, 2021;
originally announced October 2021.
-
Evaluation of Sampling Methods for Robotic Sediment Sampling Systems
Authors:
Jun Han Bae,
Wonse Jo,
Jee Hwan Park,
Richard M. Voyles,
Sara K. McMillan,
Byung-Cheol Min
Abstract:
Analysis of sediments from rivers, lakes, reservoirs, wetlands and other constructed surface water impoundments is an important tool to characterize the function and health of these systems, but is generally carried out manually. This is costly and can be hazardous and difficult for humans due to inaccessibility, contamination, or availability of required equipment. Robotic sampling systems can ea…
▽ More
Analysis of sediments from rivers, lakes, reservoirs, wetlands and other constructed surface water impoundments is an important tool to characterize the function and health of these systems, but is generally carried out manually. This is costly and can be hazardous and difficult for humans due to inaccessibility, contamination, or availability of required equipment. Robotic sampling systems can ease these burdens, but little work has examined the efficiency of such sampling means and no prior work has investigated the quality of the resulting samples. This paper presents an experimental study that evaluates and optimizes sediment sampling patterns applied to a robot sediment sampling system that allows collection of minimally-disturbed sediment cores from natural and man-made water bodies for various sediment types. To meet this need, we developed and tested a robotic sampling platform in the laboratory to test functionality under a range of sediment types and operating conditions. Specifically, we focused on three patterns by which a cylindrical coring device was driven into the sediment (linear, helical, and zig-zag) for three sediment types (coarse sand, medium sand, and silt). The results show that the optimal sampling pattern varies depending on the type of sediment and can be optimized based on the sampling objective. We examined two sampling objectives: maximizing the mass of minimally disturbed sediment and minimizing the power per mass of sample. This study provides valuable data to aid in the selection of optimal sediment coring methods for various applications and builds a solid foundation for future field testing under a range of environmental conditions.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Quantizing the Homogeneous Linear Perturbations about Taub using the Jacobi Method of Second Variation
Authors:
Joseph H. Bae
Abstract:
Applying the Jacobi method of second variation to the Bianchi IX system in Misner variables $(α, β_+, β_-)$, we specialize to the Taub space background $(β_- = 0)$ and obtain the governing equations for linearized homogeneous perturbations $(α', β_+', β_-')$ thereabout. Employing a canonical transformation, we isolate two decoupled gauge-invariant linearized variables ($β_-'$ and…
▽ More
Applying the Jacobi method of second variation to the Bianchi IX system in Misner variables $(α, β_+, β_-)$, we specialize to the Taub space background $(β_- = 0)$ and obtain the governing equations for linearized homogeneous perturbations $(α', β_+', β_-')$ thereabout. Employing a canonical transformation, we isolate two decoupled gauge-invariant linearized variables ($β_-'$ and $Q_+' = p_+ α' + p_αβ_+'$), together with their conjugate momenta and linearized Hamiltonians. These two linearized Hamiltonians are of time-dependent harmonic oscillator form, and we quantize them to get time-dependent Schrödinger equations. For the case of $Q_+'$, we are able to solve for the discrete solutions and the exact quantum squeezed states.
△ Less
Submitted 13 October, 2014;
originally announced October 2014.
-
Mixmaster Revisited: Wormhole Solutions to the Bianchi IX Wheeler-DeWitt Equation using the Euclidean-Signature Semi-Classical Method
Authors:
Joseph H. Bae
Abstract:
A modified semi-classical method is used to construct both ground and excited state solutions to the canonically quantized vacuum Bianchi IX (Mixmaster) cosmological models. Employing a modified form of the semi-classical Ansatz we solve the relevant Wheeler-DeWitt equation asymptotically by integrating a set of linear transport equations along the flow of a suitably chosen solution to the corresp…
▽ More
A modified semi-classical method is used to construct both ground and excited state solutions to the canonically quantized vacuum Bianchi IX (Mixmaster) cosmological models. Employing a modified form of the semi-classical Ansatz we solve the relevant Wheeler-DeWitt equation asymptotically by integrating a set of linear transport equations along the flow of a suitably chosen solution to the corresponding Euclidean-signature Hamilton-Jacobi equation. For the Moncrief-Ryan (or `wormhole') Hamilton-Jacobi solution, we compute the ground state quantum correction term associated with operator ordering ambiguities and show how higher order correction terms can be computed. We also determine the explicit, leading order forms of a family of excited states and show how to compute their quantum corrections as smooth, globally defined functions on the Bianchi IX minisuperspace. These excited-state solutions are peaked away from the minisuperspace origin and are labeled by a pair of positive integers that can be plausibly interpreted as graviton excitation numbers for the two independent anisotropy degrees of freedom. The modified semi-classical method used here is applicable to more general models, representing a significant progress in the Wheeler-DeWitt approach to quantum gravity.
△ Less
Submitted 9 March, 2015; v1 submitted 2 June, 2014;
originally announced June 2014.
-
On the achievable region for interference networks with point-to-point codes
Authors:
Jung Hyun Bae,
Jungwon Lee,
Inyup Kang
Abstract:
This paper studies evaluation of the capacity region for interference networks with point-to-point (p2p) capacity-achieving codes. Such capacity region has recently been characterized as union of several sub-regions each of which has distinctive operational characteristics. Detailed evaluation of this region, therefore, can be accomplished in a very simple manner by acknowledging such characterist…
▽ More
This paper studies evaluation of the capacity region for interference networks with point-to-point (p2p) capacity-achieving codes. Such capacity region has recently been characterized as union of several sub-regions each of which has distinctive operational characteristics. Detailed evaluation of this region, therefore, can be accomplished in a very simple manner by acknowledging such characteristics, which, in turn, provides an insight for a simple implementation scenario. Completely generalized message assignment which is also practically relevant is considered in this paper, and it is shown to provide strictly larger achievable rates than what traditional message assignment does when a receiver with joint decoding capability is used.
△ Less
Submitted 25 January, 2013;
originally announced January 2013.
-
Outage-based ergodic link adaptation for fading channels with delayed CSIT
Authors:
Jung Hyun Bae,
Jungwon Lee,
Inyup Kang
Abstract:
Link adaptation in which the transmission data rate is dynamically adjusted according to channel variation is often used to deal with time-varying nature of wireless channel. When channel state information at the transmitter (CSIT) is delayed by more than channel coherence time due to feedback delay, however, the effect of link adaptation can possibly be taken away if this delay is not taken into…
▽ More
Link adaptation in which the transmission data rate is dynamically adjusted according to channel variation is often used to deal with time-varying nature of wireless channel. When channel state information at the transmitter (CSIT) is delayed by more than channel coherence time due to feedback delay, however, the effect of link adaptation can possibly be taken away if this delay is not taken into account. One way to deal with such delay is to predict current channel quality given available observation, but this would inevitably result in prediction error. In this paper, an algorithm with different view point is proposed. By using conditional cdf of current channel given observation, outage probability can be computed for each value of transmission rate $R$. By assuming that the transmission block error rate (BLER) is dominated by outage probability, the expected throughput can also be computed, and $R$ can be determined to maximize it. The proposed scheme is designed to be optimal if channel has ergodicity, and it is shown to considerably outperform conventional schemes in certain Rayleigh fading channel model.
△ Less
Submitted 27 September, 2012; v1 submitted 14 September, 2012;
originally announced September 2012.
-
The GDOF of 3-user MIMO Gaussian interference channel
Authors:
Jung Hyun Bae,
Jungwon Lee,
Inyup Kang
Abstract:
The paper establishes the optimal generalized degrees of freedom (GDOF) of 3-user $M \times N$ multiple-input multiple-output (MIMO) Gaussian interference channel (GIC) in which each transmitter has $M$ antennas and each receiver has $N$ antennas. A constraint of $2M \leq N$ is imposed so that random coding with message-splitting achieves the optimal GDOF. Unlike symmetric case, two cross channels…
▽ More
The paper establishes the optimal generalized degrees of freedom (GDOF) of 3-user $M \times N$ multiple-input multiple-output (MIMO) Gaussian interference channel (GIC) in which each transmitter has $M$ antennas and each receiver has $N$ antennas. A constraint of $2M \leq N$ is imposed so that random coding with message-splitting achieves the optimal GDOF. Unlike symmetric case, two cross channels to unintended receivers from each transmitter can have different strengths, and hence, well known Han-Kobayashi common-private message splitting would not achieve the optimal GDOF. Instead, splitting each user's message into three parts is shown to achieve the optimal GDOF. The capacity of the corresponding deterministic model is first established which provides systematic way of determining side information for converse. Although this deterministic model is philosophically similar to the one considered by Gou and Jafar, additional constraints are imposed so that capacity description of the deterministic model only contains the essential terms for establishing the GDOF of Gaussian case. Based on this, the optimal GDOF of Gaussian case is established with $\mathcal{O}(1)$ capacity approximation. The behavior of the GDOF is interestingly different from that of the corresponding symmetric case. Regarding the converse, several multiuser outer bounds which are suitable for asymmetric case are derived by non-trivial generalization of the symmetric case.
△ Less
Submitted 27 August, 2012; v1 submitted 20 July, 2012;
originally announced July 2012.
-
Simple transmission strategies for interference channel
Authors:
Jung Hyun Bae,
Jungwon Lee,
Inyup Kang
Abstract:
In this paper, we investigate performances of simple transmission strategies. We first consider two user SISO Gaussian symmetric interference channel (IC) for which Etkin, Tse and Wang proposed a scheme (ETW scheme) which achieves one bit gap to the capacity. We compare performance of point-to-point (p2p) codes with that of the ETW scheme in practical range of transmitter power. It turns out that…
▽ More
In this paper, we investigate performances of simple transmission strategies. We first consider two user SISO Gaussian symmetric interference channel (IC) for which Etkin, Tse and Wang proposed a scheme (ETW scheme) which achieves one bit gap to the capacity. We compare performance of point-to-point (p2p) codes with that of the ETW scheme in practical range of transmitter power. It turns out that p2p coding scheme performs better or as nearly good as the ETW scheme. Next, we consider K user SISO Gaussian symmetric IC. We define interference regimes for K user SISO Gaussian symmetric IC and provide closed-form characterization of the symmetric rate achieved by the p2p scheme and the ETW scheme. Using this characterization, we evaluate performances of simple strategies with K=3, and show the similar trend to two user case.
△ Less
Submitted 11 May, 2012; v1 submitted 17 February, 2012;
originally announced February 2012.