-
Vector leptoquark contributions to lepton dipole moments
Authors:
Arvind Bhaskar,
Diganta Das,
Soumyadip Kundu,
Anirudhan A. Madathil,
Tanumoy Mandal,
Subhadip Mitra
Abstract:
Leptoquarks (LQs) can contribute to the magnetic and electric dipole moments of charged leptons, which the current experiments have measured with good accuracy. We revisit the parameter spaces of TeV-scale vector LQs that contribute to these observables and study how these models fare against the LHC bounds. We find that only $U_1$ and $V_2$ can explain the observed positive shift in…
▽ More
Leptoquarks (LQs) can contribute to the magnetic and electric dipole moments of charged leptons, which the current experiments have measured with good accuracy. We revisit the parameter spaces of TeV-scale vector LQs that contribute to these observables and study how these models fare against the LHC bounds. We find that only $U_1$ and $V_2$ can explain the observed positive shift in $(a_μ^{\rm exp} - a_μ^{\rm SM})$ through a lepton chirality-flipping contribution with $\mathcal O(1)$ LQ-quark-lepton coupling. We also see how these two LQs can fit the electron dipole moment measurements.
△ Less
Submitted 21 August, 2024;
originally announced August 2024.
-
NAVINACT: Combining Navigation and Imitation Learning for Bootstrapping Reinforcement Learning
Authors:
Amisha Bhaskar,
Zahiruddin Mahammad,
Sachin R Jadhav,
Pratap Tokekar
Abstract:
Reinforcement Learning (RL) has shown remarkable progress in simulation environments, yet its application to real-world robotic tasks remains limited due to challenges in exploration and generalisation. To address these issues, we introduce NAVINACT, a framework that chooses when the robot should use classical motion planning-based navigation and when it should learn a policy. To further improve t…
▽ More
Reinforcement Learning (RL) has shown remarkable progress in simulation environments, yet its application to real-world robotic tasks remains limited due to challenges in exploration and generalisation. To address these issues, we introduce NAVINACT, a framework that chooses when the robot should use classical motion planning-based navigation and when it should learn a policy. To further improve the efficiency in exploration, we use imitation data to bootstrap the exploration. NAVINACT dynamically switches between two modes of operation: navigating to a waypoint using classical techniques when away from the objects and reinforcement learning for fine-grained manipulation control when about to interact with objects. NAVINACT consists of a multi-head architecture composed of ModeNet for mode classification, NavNet for waypoint prediction, and InteractNet for precise manipulation. By combining the strengths of RL and Imitation Learning (IL), NAVINACT improves sample efficiency and mitigates distribution shift, ensuring robust task execution. We evaluate our approach across multiple challenging simulation environments and real-world tasks, demonstrating superior performance in terms of adaptability, efficiency, and generalization compared to existing methods. In both simulated and real-world settings, NAVINACT demonstrates robust performance. In simulations, NAVINACT surpasses baseline methods by 10-15\% in training success rates at 30k samples and by 30-40\% during evaluation phases. In real-world scenarios, it demonstrates a 30-40\% higher success rate on simpler tasks compared to baselines and uniquely succeeds in complex, two-stage manipulation tasks.
Datasets and supplementary materials can be found on our website: {https://raaslab.org/projects/NAVINACT/}.
△ Less
Submitted 7 August, 2024;
originally announced August 2024.
-
Understanding Routing-Induced Censorship Changes Globally
Authors:
Abhishek Bhaskar,
Paul Pearce
Abstract:
Internet censorship is pervasive, with significant effort dedicated to understanding what is censored, and where. Prior censorship work however have identified significant inconsistencies in their results; experiments show unexplained non-determinism thought to be caused by censor load, end-host geographic diversity, or incomplete censorship -- inconsistencies which impede reliable, repeatable and…
▽ More
Internet censorship is pervasive, with significant effort dedicated to understanding what is censored, and where. Prior censorship work however have identified significant inconsistencies in their results; experiments show unexplained non-determinism thought to be caused by censor load, end-host geographic diversity, or incomplete censorship -- inconsistencies which impede reliable, repeatable and correct understanding of global censorship. In this work we investigate the extent to which Equal-cost Multi-path (ECMP) routing is the cause for these inconsistencies, developing methods to measure and compensate for them. We find ECMP routing significantly changes observed censorship across protocols, censor mechanisms, and in 17 countries. We identify that previously observed non-determinism or regional variations are attributable to measurements between fixed end-hosts taking different routes based on Flow-ID; i.e., choice of intra-subnet source IP or ephemeral source port leads to differences in observed censorship. To achieve this we develop new route-stable censorship measurement methods that allow consistent measurement of DNS, HTTP, and HTTPS censorship. We find ECMP routing yields censorship changes across 42% of IPs and 51% of ASes, but that impact is not uniform. We identify numerous causes of the behavior, ranging from likely failed infrastructure, to routes to the same end-host taking geographically diverse paths which experience differences in censorship en-route. Finally, we explore our results in the context of prior global measurement studies, exploring first the applicability of our findings to prior observed variations, and then demonstrating how specific experiments from two studies could be impacted by, and specific results are explainable by, ECMP routing. Our work points to methods for improving future studies, reducing inconsistencies and increasing repeatability.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Finding Transformer Circuits with Edge Pruning
Authors:
Adithya Bhaskar,
Alexander Wettig,
Dan Friedman,
Danqi Chen
Abstract:
The path to interpreting a language model often proceeds via analysis of circuits -- sparse computational subgraphs of the model that capture specific aspects of its behavior. Recent work has automated the task of discovering circuits. Yet, these methods have practical limitations, as they rely either on inefficient search algorithms or inaccurate approximations. In this paper, we frame automated…
▽ More
The path to interpreting a language model often proceeds via analysis of circuits -- sparse computational subgraphs of the model that capture specific aspects of its behavior. Recent work has automated the task of discovering circuits. Yet, these methods have practical limitations, as they rely either on inefficient search algorithms or inaccurate approximations. In this paper, we frame automated circuit discovery as an optimization problem and propose *Edge Pruning* as an effective and scalable solution. Edge Pruning leverages gradient-based pruning techniques, but instead of removing neurons or components, it prunes the \emph{edges} between components. Our method finds circuits in GPT-2 that use less than half the number of edges compared to circuits found by previous methods while being equally faithful to the full model predictions on standard circuit-finding tasks. Edge Pruning is efficient even with as many as 100K examples, outperforming previous methods in speed and producing substantially better circuits. It also perfectly recovers the ground-truth circuits in two models compiled with Tracr. Thanks to its efficiency, we scale Edge Pruning to CodeLlama-13B, a model over 100x the scale that prior methods operate on. We use this setting for a case study comparing the mechanisms behind instruction prompting and in-context learning. We find two circuits with more than 99.96% sparsity that match the performance of the full model and reveal that the mechanisms in the two settings overlap substantially. Our case study shows that Edge Pruning is a practical and scalable tool for interpretability and sheds light on behaviors that only emerge in large models.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Deciphering Solar Cycle Influence on Long-Term Orbital Deterioration of Space Debris in LEO and MEO orbits
Authors:
Ayisha M Ashruf,
Ankush Bhaskar,
Tarun Kumar Pant
Abstract:
The rapid increase in the number of space debris represents a substantial threat to the sustained viability of space operations. Monitoring these debris is critical for space situational awareness. Therefore, it has become of immense importance to understand the impact of solar activity on the space debris orbit. This study examines the effect of solar cycles, specifically Solar Cycles 22, 23, and…
▽ More
The rapid increase in the number of space debris represents a substantial threat to the sustained viability of space operations. Monitoring these debris is critical for space situational awareness. Therefore, it has become of immense importance to understand the impact of solar activity on the space debris orbit. This study examines the effect of solar cycles, specifically Solar Cycles 22, 23, and 24, on the orbital decay of space debris. Utilizing TLE data for 95 objects in LEO and MEO dating back to the 1960s, we examined the orbital decay rates of these objects across the three solar cycles. Our analysis reveals a significant correlation between orbital decay and various indices serving as proxies for solar and geomagnetic activity. Notably, Solar Cycle 22 exhibited the highest decay rates, while Solar Cycle 24 showed the lowest. Moreover, we observed a similar impact at altitudes exceeding 2000 km, albeit with a time lag of over 14 months compared to the shorter lag observed at LEO orbits during peak solar activity. These findings underscore the crucial relationship between solar activity and its enduring influence on space debris.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Low-Latitude Auroras: Insights from 23 April 2023 Solar Storm
Authors:
Geeta Vichare,
Ankush Bhaskar,
Rahul Rawat,
Virendra Yadav,
Wageesh Mishra,
Dorje Angchuk,
Anand Kumar Singh
Abstract:
In April 2023, low-latitude aurora observation by the all-sky camera at Hanle, Ladakh, India ($33^{\circ} {} N $ geographic latitude (GGLat)) was reported, which stimulated a lot of discussion among scientists as well as masses across the globe. The reported observation was intriguing as the solar storm that triggered this aurora was moderate and the first such observation from Indian region in th…
▽ More
In April 2023, low-latitude aurora observation by the all-sky camera at Hanle, Ladakh, India ($33^{\circ} {} N $ geographic latitude (GGLat)) was reported, which stimulated a lot of discussion among scientists as well as masses across the globe. The reported observation was intriguing as the solar storm that triggered this aurora was moderate and the first such observation from Indian region in the space-era. In this communication, we investigate such a unique modern-day observation of low-latitude auroral sighting occurring during the passage of sheath-region of Interplanetary-Coronal-Mass-Ejection, utilizing in situ multi-spacecraft particle measurements along with geomagnetic-field observations by ground and satellite-based magnetometers. Auroral observations at Hanle coincided with the intense substorm occurrences. It is unequivocally found that the aurora didnt reach India, rather the equatorward boundary of the aurora was beyond $ 50^{\circ} {}N $ GGLat. The multi-instrumental observations enabled us to estimate the altitude of the red auroral emissions accurately. The increased flux of low-energy electrons ($<$100 eV) precipitating at $\sim 54^{\circ}N$ GGLat causing red-light emissions at higher altitudes ($\sim$700-950 km) can be visible from Hanle. The observed low-latitude red aurora from India resulted from two factors: emissions at higher altitudes in the auroral oval and a slight expansion of the auroral oval towards the equator. The precipitating low-energy particles responsible for red auroral emissions mostly originate from the plasma sheet. These particles precipitate due to wave-particle interactions enhanced by strong compression of the magnetosphere during high solar wind pressure. This study using multi-point observations holds immense importance in providing a better understanding of low-latitude auroras.
△ Less
Submitted 25 April, 2024;
originally announced May 2024.
-
Scrutinizing Data from Sky: An Examination of Its Veracity in Area Based Traffic Contexts
Authors:
Yawar Ali,
Krishnan K N,
Debashis Ray Sarkar,
K. Ramachandra Rao,
Niladri Chatterjee,
Ashish Bhaskar
Abstract:
Traffic data collection has been an overwhelming task for researchers as well as authorities over the years. With the advancement in technology and introduction of various tools for processing and extracting traffic data the task has been made significantly convenient. Data from Sky (DFS) is one such tool, based on image processing and artificial intelligence (AI), that provides output for macrosc…
▽ More
Traffic data collection has been an overwhelming task for researchers as well as authorities over the years. With the advancement in technology and introduction of various tools for processing and extracting traffic data the task has been made significantly convenient. Data from Sky (DFS) is one such tool, based on image processing and artificial intelligence (AI), that provides output for macroscopic as well as microscopic variables of the traffic streams. The company claims to provide 98 to 100 percent accuracy on the data exported using DFS tool. The tool is widely used in developed countries where the traffic is homogenous and has lane-based movements. In this study, authors have checked the veracity of DFS tool in heterogenous and area-based traffic movement that is prevailing in most developing countries. The validation is done using various methods using Classified Volume Count (CVC), Space Mean Speeds (SMS) of individual vehicle classes and microscopic trajectory of probe vehicle to verify DFS claim. The error for CVCs for each vehicle class present in the traffic stream is estimated. Mean Absolute Percentage Error (MAPE) values are calculated for average speeds of each vehicle class between manually and DFS extracted space mean speeds (SMSs), and the microscopic trajectories are validated using a GPS based tracker put on probe vehicles. The results are fairly accurate in the case of data taken from a bird eye view with least errors. The other configurations of data collection have some significant errors, that are majorly caused by the varied traffic composition, the view of camera angle, and the direction of traffic.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Adaptive Visual Imitation Learning for Robotic Assisted Feeding Across Varied Bowl Configurations and Food Types
Authors:
Rui Liu,
Amisha Bhaskar,
Pratap Tokekar
Abstract:
In this study, we introduce a novel visual imitation network with a spatial attention module for robotic assisted feeding (RAF). The goal is to acquire (i.e., scoop) food items from a bowl. However, achieving robust and adaptive food manipulation is particularly challenging. To deal with this, we propose a framework that integrates visual perception with imitation learning to enable the robot to h…
▽ More
In this study, we introduce a novel visual imitation network with a spatial attention module for robotic assisted feeding (RAF). The goal is to acquire (i.e., scoop) food items from a bowl. However, achieving robust and adaptive food manipulation is particularly challenging. To deal with this, we propose a framework that integrates visual perception with imitation learning to enable the robot to handle diverse scenarios during scooping. Our approach, named AVIL (adaptive visual imitation learning), exhibits adaptability and robustness across different bowl configurations in terms of material, size, and position, as well as diverse food types including granular, semi-solid, and liquid, even in the presence of distractors. We validate the effectiveness of our approach by conducting experiments on a real robot. We also compare its performance with a baseline. The results demonstrate improvement over the baseline across all scenarios, with an enhancement of up to 2.5 times in terms of a success metric. Notably, our model, trained solely on data from a transparent glass bowl containing granular cereals, showcases generalization ability when tested zero-shot on other bowl configurations with different types of food.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
LAVA: Long-horizon Visual Action based Food Acquisition
Authors:
Amisha Bhaskar,
Rui Liu,
Vishnu D. Sharma,
Guangyao Shi,
Pratap Tokekar
Abstract:
Robotic Assisted Feeding (RAF) addresses the fundamental need for individuals with mobility impairments to regain autonomy in feeding themselves. The goal of RAF is to use a robot arm to acquire and transfer food to individuals from the table. Existing RAF methods primarily focus on solid foods, leaving a gap in manipulation strategies for semi-solid and deformable foods. This study introduces Lon…
▽ More
Robotic Assisted Feeding (RAF) addresses the fundamental need for individuals with mobility impairments to regain autonomy in feeding themselves. The goal of RAF is to use a robot arm to acquire and transfer food to individuals from the table. Existing RAF methods primarily focus on solid foods, leaving a gap in manipulation strategies for semi-solid and deformable foods. This study introduces Long-horizon Visual Action (LAVA) based food acquisition of liquid, semisolid, and deformable foods. Long-horizon refers to the goal of "clearing the bowl" by sequentially acquiring the food from the bowl. LAVA employs a hierarchical policy for long-horizon food acquisition tasks. The framework uses high-level policy to determine primitives by leveraging ScoopNet. At the mid-level, LAVA finds parameters for primitives using vision. To carry out sequential plans in the real world, LAVA delegates action execution which is driven by Low-level policy that uses parameters received from mid-level policy and behavior cloning ensuring precise trajectory execution. We validate our approach on complex real-world acquisition trials involving granular, liquid, semisolid, and deformable food types along with fruit chunks and soup acquisition. Across 46 bowls, LAVA acquires much more efficiently than baselines with a success rate of 89 +/- 4% and generalizes across realistic plate variations such as different positions, varieties, and amount of food in the bowl. Code, datasets, videos, and supplementary materials can be found on our website.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
The Heuristic Core: Understanding Subnetwork Generalization in Pretrained Language Models
Authors:
Adithya Bhaskar,
Dan Friedman,
Danqi Chen
Abstract:
Prior work has found that pretrained language models (LMs) fine-tuned with different random seeds can achieve similar in-domain performance but generalize differently on tests of syntactic generalization. In this work, we show that, even within a single model, we can find multiple subnetworks that perform similarly in-domain, but generalize vastly differently. To better understand these phenomena,…
▽ More
Prior work has found that pretrained language models (LMs) fine-tuned with different random seeds can achieve similar in-domain performance but generalize differently on tests of syntactic generalization. In this work, we show that, even within a single model, we can find multiple subnetworks that perform similarly in-domain, but generalize vastly differently. To better understand these phenomena, we investigate if they can be understood in terms of "competing subnetworks": the model initially represents a variety of distinct algorithms, corresponding to different subnetworks, and generalization occurs when it ultimately converges to one. This explanation has been used to account for generalization in simple algorithmic tasks ("grokking"). Instead of finding competing subnetworks, we find that all subnetworks -- whether they generalize or not -- share a set of attention heads, which we refer to as the heuristic core. Further analysis suggests that these attention heads emerge early in training and compute shallow, non-generalizing features. The model learns to generalize by incorporating additional attention heads, which depend on the outputs of the "heuristic" heads to compute higher-level features. Overall, our results offer a more detailed picture of the mechanisms for syntactic generalization in pretrained LMs.
△ Less
Submitted 5 June, 2024; v1 submitted 6 March, 2024;
originally announced March 2024.
-
AuroraMag: Twin Explorer of Asymmetry in Aurora and Solar Wind-Magnetosphere Coupling
Authors:
Ankush Bhaskar,
Jayadev Pradeep,
Shyama Narendranath,
Dibyendu Nandy,
Bhargav Vaidya,
Priyadarshan Hari,
Smitha V. Thampi,
Vipin K. Yadav,
Geeta Vichare,
Anil Raghav,
Dibyendu Chakrabarty,
R. Satheesh Thampi,
Tarun Kumar Pant
Abstract:
In the present-day context, small satellites and their constellations consisting of varying sizes (nano, micro, pico satellites) are being favored for remote sensing and in situ probing of the heliosphere and terrestrial magnetosphere-ionosphere system. We introduce a mission concept aimed at concurrently observing Earth's northern and southern auroral ovals while conducting in situ measurements o…
▽ More
In the present-day context, small satellites and their constellations consisting of varying sizes (nano, micro, pico satellites) are being favored for remote sensing and in situ probing of the heliosphere and terrestrial magnetosphere-ionosphere system. We introduce a mission concept aimed at concurrently observing Earth's northern and southern auroral ovals while conducting in situ measurements of particles, fields, and temperature. The mission concept consists of two small satellites, each having an identical auroral X-ray imager, an in situ particle detector, a magnetometer pair, and an electron temperature analyzer onboard in an elliptical polar orbit (400X1000 km ). This mission would assist the space weather community in primarily answering important questions about the formation, morphology, and hemispherical asymmetries that we observe in the X-ray aurora, the fluxes of precipitating particles, Solar Energetic Particles, currents, and cusp dynamics. Once realized, this would be the first dedicated twin spacecraft mission of such kind to simultaneously study hemispheric asymmetries of solar-wind magnetosphere coupling. This study reveals the intricacies of the mission concept, encompassing orbital details, potential payloads, and its underlying scientific objectives. By leveraging the capabilities of small satellites, this mission concept is poised to make significant contributions to space weather monitoring and research.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
Improving Language Understanding from Screenshots
Authors:
Tianyu Gao,
Zirui Wang,
Adithya Bhaskar,
Danqi Chen
Abstract:
An emerging family of language models (LMs), capable of processing both text and images within a single visual view, has the promise to unlock complex tasks such as chart understanding and UI navigation. We refer to these models as screenshot language models. Despite their appeal, existing screenshot LMs substantially lag behind text-only models on language understanding tasks. To close this gap,…
▽ More
An emerging family of language models (LMs), capable of processing both text and images within a single visual view, has the promise to unlock complex tasks such as chart understanding and UI navigation. We refer to these models as screenshot language models. Despite their appeal, existing screenshot LMs substantially lag behind text-only models on language understanding tasks. To close this gap, we adopt a simplified setting where the model inputs are plain-text-rendered screenshots, and we focus on improving the text ability of screenshot LMs. We propose a novel Patch-and-Text Prediction (PTP) objective, which masks and recovers both image patches of screenshots and text within screenshots. We also conduct extensive ablation studies on masking rates and patch sizes, as well as designs for improving training stability. Our pre-trained model, while solely taking visual inputs, achieves comparable performance with BERT on 6 out of 8 GLUE tasks (within 2%) and improves up to 8% over prior work. Additionally, we extend PTP to train autoregressive screenshot LMs and demonstrate its effectiveness--our models can significantly reduce perplexity by utilizing the screenshot context. Together, we hope our findings can inspire future research on developing powerful screenshot LMs and extending their reach to broader applications.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
REBEL: A Regularization-Based Solution for Reward Overoptimization in Robotic Reinforcement Learning from Human Feedback
Authors:
Souradip Chakraborty,
Anukriti Singh,
Amisha Bhaskar,
Pratap Tokekar,
Dinesh Manocha,
Amrit Singh Bedi
Abstract:
The effectiveness of reinforcement learning (RL) agents in continuous control robotics tasks is heavily dependent on the design of the underlying reward function. However, a misalignment between the reward function and user intentions, values, or social norms can be catastrophic in the real world. Current methods to mitigate this misalignment work by learning reward functions from human preference…
▽ More
The effectiveness of reinforcement learning (RL) agents in continuous control robotics tasks is heavily dependent on the design of the underlying reward function. However, a misalignment between the reward function and user intentions, values, or social norms can be catastrophic in the real world. Current methods to mitigate this misalignment work by learning reward functions from human preferences; however, they inadvertently introduce a risk of reward overoptimization. In this work, we address this challenge by advocating for the adoption of regularized reward functions that more accurately mirror the intended behaviors. We propose a novel concept of reward regularization within the robotic RLHF (RL from Human Feedback) framework, which we refer to as \emph{agent preferences}. Our approach uniquely incorporates not just human feedback in the form of preferences but also considers the preferences of the RL agent itself during the reward function learning process. This dual consideration significantly mitigates the issue of reward function overoptimization in RL. We provide a theoretical justification for the proposed approach by formulating the robotic RLHF problem as a bilevel optimization problem. We demonstrate the efficiency of our algorithm {\ours} in several continuous control benchmarks including DeepMind Control Suite \cite{tassa2018deepmind} and MetaWorld \cite{yu2021metaworld} and high dimensional visual environments, with an improvement of more than 70\% in sample efficiency in comparison to current SOTA baselines. This showcases our approach's effectiveness in aligning reward functions with true behavioral intentions, setting a new benchmark in the field.
△ Less
Submitted 14 April, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
-
Fresh look at the LHC limits on scalar leptoquarks
Authors:
Arvind Bhaskar,
Arijit Das,
Tanumoy Mandal,
Subhadip Mitra,
Rachit Sharma
Abstract:
The scalar-leptoquark (sLQ) parameter space is well explored experimentally. The direct pair production searches at the LHC have excluded light sLQs almost model agnostically, and the high-$p_{\rm T}$ dilepton tail data have put strong bounds on the leptoquark-quark-lepton Yukawa couplings for a wide range of sLQ masses. However, these do not show the complete picture. Previously, Mandal \emph{et…
▽ More
The scalar-leptoquark (sLQ) parameter space is well explored experimentally. The direct pair production searches at the LHC have excluded light sLQs almost model agnostically, and the high-$p_{\rm T}$ dilepton tail data have put strong bounds on the leptoquark-quark-lepton Yukawa couplings for a wide range of sLQ masses. However, these do not show the complete picture. Previously, Mandal \emph{et al.} [Single productions of colored particles at the LHC: An example with scalar leptoquarks, \href{https://doi.org/10.1007/JHEP07(2015)028}{J. High Energy Phys. 07 (2015) 028}] showed how the dilepton-dijet data from the pair production searches could give strong limits on these couplings. This was possible by including the single-production contribution to the dilepton-dijet signal. In this paper, we take a fresh look at the LHC limits on all sLQs by following the same principle and combine all significant contributions -- from pair and single productions, $t$-channel sLQ exchange and its interference with the Standard Model background -- to the $μμjj$ final state and recast the limits. We notice that the sLQ exchange and its interference with the background processes play significant roles in the limits. The $μμjj$-recast limits are comparable to or, in some cases, significantly better than the currently known limits (from high-$p_{\rm T}$ dilepton data and direct searches), i.e., the LHC data rules out more parameter space than what is considered in the current literature. For the first time, we also show how including the QED processes can noticeably improve the sLQ mass exclusion limits from the QCD-only limits.
△ Less
Submitted 14 March, 2024; v1 submitted 15 December, 2023;
originally announced December 2023.
-
Benchmarking and Improving Text-to-SQL Generation under Ambiguity
Authors:
Adithya Bhaskar,
Tushar Tomar,
Ashutosh Sathe,
Sunita Sarawagi
Abstract:
Research in Text-to-SQL conversion has been largely benchmarked against datasets where each text query corresponds to one correct SQL. However, natural language queries over real-life databases frequently involve significant ambiguity about the intended SQL due to overlapping schema names and multiple confusing relationship paths. To bridge this gap, we develop a novel benchmark called AmbiQT with…
▽ More
Research in Text-to-SQL conversion has been largely benchmarked against datasets where each text query corresponds to one correct SQL. However, natural language queries over real-life databases frequently involve significant ambiguity about the intended SQL due to overlapping schema names and multiple confusing relationship paths. To bridge this gap, we develop a novel benchmark called AmbiQT with over 3000 examples where each text is interpretable as two plausible SQLs due to lexical and/or structural ambiguity.
When faced with ambiguity, an ideal top-$k$ decoder should generate all valid interpretations for possible disambiguation by the user. We evaluate several Text-to-SQL systems and decoding algorithms, including those employing state-of-the-art LLMs, and find them to be far from this ideal. The primary reason is that the prevalent beam search algorithm and its variants, treat SQL queries as a string and produce unhelpful token-level diversity in the top-$k$.
We propose LogicalBeam, a new decoding algorithm that navigates the SQL logic space using a blend of plan-based template generation and constrained infilling. Counterfactually generated plans diversify templates while in-filling with a beam-search that branches solely on schema names provides value diversity. LogicalBeam is up to $2.5$ times more effective than state-of-the-art models at generating all candidate SQLs in the top-$k$ ranked outputs. It also enhances the top-$5$ Exact and Execution Match Accuracies on SPIDER and Kaggle DBQA.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
AG-CVG: Coverage Planning with a Mobile Recharging UGV and an Energy-Constrained UAV
Authors:
Nare Karapetyan,
Ahmad Bilal Asghar,
Amisha Bhaskar,
Guangyao Shi,
Dinesh Manocha,
Pratap Tokekar
Abstract:
In this paper, we present an approach for coverage path planning for a team of an energy-constrained Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV). Both the UAV and the UGV have predefined areas that they have to cover. The goal is to perform complete coverage by both robots while minimizing the coverage time. The UGV can also serve as a mobile recharging station. The UAV and…
▽ More
In this paper, we present an approach for coverage path planning for a team of an energy-constrained Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV). Both the UAV and the UGV have predefined areas that they have to cover. The goal is to perform complete coverage by both robots while minimizing the coverage time. The UGV can also serve as a mobile recharging station. The UAV and UGV need to occasionally rendezvous for recharging. We propose a heuristic method to address this NP-Hard planning problem. Our approach involves initially determining coverage paths without factoring in energy constraints. Subsequently, we cluster segments of these paths and employ graph matching to assign UAV clusters to UGV clusters for efficient recharging management. We perform numerical analysis on real-world coverage applications and show that compared with a greedy approach our method reduces rendezvous overhead on average by 11.33%. We demonstrate proof-of-concept with a team of a VOXL m500 drone and a Clearpath Jackal ground vehicle, providing a complete system from the offline algorithm to the field execution.
△ Less
Submitted 15 March, 2024; v1 submitted 11 October, 2023;
originally announced October 2023.
-
Performance Bounds for LASSO under Multiplicative Noise: Applications to Pooled RT-PCR Testing
Authors:
Richeek Das,
Aaron Jerry Ninan,
Adithya Bhaskar,
Ajit Rajwade
Abstract:
Group testing is a technique which avoids individually testing $n$ samples for a rare disease and instead tests $n < p$ pools, where a pool consists of a mixture of small, equal portions of a subset of the $p$ samples. Group testing saves testing time and resources in many applications, including RT-PCR, with guarantees for the recovery of the status of the $p$ samples from results on $n$ pools. T…
▽ More
Group testing is a technique which avoids individually testing $n$ samples for a rare disease and instead tests $n < p$ pools, where a pool consists of a mixture of small, equal portions of a subset of the $p$ samples. Group testing saves testing time and resources in many applications, including RT-PCR, with guarantees for the recovery of the status of the $p$ samples from results on $n$ pools. The noise in quantitative RT- PCR is inherently known to follow a multiplicative data-dependent model. In recent literature, the corresponding linear systems for inferring the health status of $p$ samples from results on $n$ pools have been solved using the Lasso estimator and its variants, which have been typically used in additive Gaussian noise settings. There is no existing literature which establishes performance bounds for Lasso for the multiplicative noise model associated with RT-PCR. After noting that a recent general technique, Hunt et al., works for Poisson inverse problems, we adapt it to handle sparse signal reconstruction from compressive measurements with multiplicative noise: we present high probability performance bounds and data-dependent weights for the Lasso and its weighted version. We also show numerical results on simulated pooled RT-PCR data to empirically validate our bounds.
△ Less
Submitted 28 August, 2023; v1 submitted 27 May, 2023;
originally announced May 2023.
-
Quasi-planar ICME sheath: a cause of first two-step extreme geomagnetic storm of 25th solar cycle observed on 23 April 2023
Authors:
Kalpesh Ghag,
Anil Raghav,
Ankush Bhaskar,
Shirish Soni,
Bhagyashri Sathe,
Zubair Shaikh,
Omkar Dhamane,
Prathmesh Tari
Abstract:
Interplanetary Coronal Mass Ejections (ICMEs) are prominent drivers of space weather disturbances and mainly lead to intense or extreme geomagnetic storms. The reported studies suggested that the planar ICME sheath and planar magnetic clouds (MCs) cause extreme storms. Here, we investigated the severe two-step geomagnetic storm ($Dst \sim -187$ nT) of 25$^{th}$ solar cycle. Our analysis demonstrat…
▽ More
Interplanetary Coronal Mass Ejections (ICMEs) are prominent drivers of space weather disturbances and mainly lead to intense or extreme geomagnetic storms. The reported studies suggested that the planar ICME sheath and planar magnetic clouds (MCs) cause extreme storms. Here, we investigated the severe two-step geomagnetic storm ($Dst \sim -187$ nT) of 25$^{th}$ solar cycle. Our analysis demonstrates flattened (pancaked) ICME structures, i.e., quasi-planar magnetic structures (PMS). The study corroborates our earlier reported finding that the less adiabatic expansion in quasi-PMS transformed ICME enhanced the strength of the southward magnetic field component. It contributes to the efficient transfer of plasma and energy in the Earth's magnetosphere to cause the observed severe storm.
△ Less
Submitted 12 January, 2024; v1 submitted 6 May, 2023;
originally announced May 2023.
-
Observational Validation of Cosmic Ray Acceleration Hypothesis
Authors:
Anil Raghav,
Kalpesh Ghag,
Omkar Dhamane,
Zubair Shaikh,
Ankush Bhaskar,
Utsav Panchal
Abstract:
Despite centuries of rigorous theoretical and observational research, the origin and acceleration mechanism of Galactic Cosmic Rays (GCRs) remain a mystery. In 1949, Fermi proposed a diffusive shock acceleration model that includes a prominent mechanism for GCR acceleration. However, observational evidence, on the other hand, remains elusive. Here, we provided the first apparent verification of GC…
▽ More
Despite centuries of rigorous theoretical and observational research, the origin and acceleration mechanism of Galactic Cosmic Rays (GCRs) remain a mystery. In 1949, Fermi proposed a diffusive shock acceleration model that includes a prominent mechanism for GCR acceleration. However, observational evidence, on the other hand, remains elusive. Here, we provided the first apparent verification of GCR acceleration at 1 AU using measurements from the CRIS instrument onboard the ACE spacecraft.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Right-handed neutrino pair production via second-generation leptoquarks
Authors:
Arvind Bhaskar,
Yash Chaurasia,
Kuldeep Deka,
Tanumoy Mandal,
Subhadip Mitra,
Ananya Mukherjee
Abstract:
No direct experimental constraints exist on Leptoquark (LQ) couplings with quarks and right-handed neutrinos (RHNs). If a LQ dominantly couples to RHNs, it can leave unique signatures at the LHC. The RHNs can be produced copiously from LQ decays as long as they are lighter than the LQs. LQ-induced RHN production has never been searched for in experiments. This channel can act as a simultaneous pro…
▽ More
No direct experimental constraints exist on Leptoquark (LQ) couplings with quarks and right-handed neutrinos (RHNs). If a LQ dominantly couples to RHNs, it can leave unique signatures at the LHC. The RHNs can be produced copiously from LQ decays as long as they are lighter than the LQs. LQ-induced RHN production has never been searched for in experiments. This channel can act as a simultaneous probe for RHNs and LQs that dominantly couple to RHNs. In this paper, we consider all possible charge-$2/3$ and $1/3$ scalar and vector LQs that dominantly couple to second-generation quarks and RHN. We study the pair and single productions of TeV-scale LQs and their subsequent decay to sub-TeV RHNs, realised in the inverse seesaw framework. We also consider RHN pair production through a $t$-channel LQ exchange. The single LQ production and $t$-channel contributions can be significant for large LQ-RHN-quark couplings. We systematically combine events from these processes leading to a pair of RHNs plus jets to study the prospects of LQ-assisted RHN pair production. We analyse the monolepton and opposite-sign dilepton final states and estimate the discovery reach at the high-luminosity LHC.
△ Less
Submitted 1 March, 2024; v1 submitted 27 January, 2023;
originally announced January 2023.
-
Prompted Opinion Summarization with GPT-3.5
Authors:
Adithya Bhaskar,
Alexander R. Fabbri,
Greg Durrett
Abstract:
Large language models have shown impressive performance across a wide variety of tasks, including text summarization. In this paper, we show that this strong performance extends to opinion summarization. We explore several pipeline methods for applying GPT-3.5 to summarize a large collection of user reviews in a prompted fashion. To handle arbitrarily large numbers of user reviews, we explore recu…
▽ More
Large language models have shown impressive performance across a wide variety of tasks, including text summarization. In this paper, we show that this strong performance extends to opinion summarization. We explore several pipeline methods for applying GPT-3.5 to summarize a large collection of user reviews in a prompted fashion. To handle arbitrarily large numbers of user reviews, we explore recursive summarization as well as methods for selecting salient content to summarize through supervised clustering or extraction. On two datasets, an aspect-oriented summarization dataset of hotel reviews (SPACE) and a generic summarization dataset of Amazon and Yelp reviews (FewSum), we show that GPT-3.5 models achieve very strong performance in human evaluation. We argue that standard evaluation metrics do not reflect this, and introduce three new metrics targeting faithfulness, factuality, and genericity to contrast these different methods.
△ Less
Submitted 23 May, 2023; v1 submitted 28 November, 2022;
originally announced November 2022.
-
Science with the Daksha High Energy Transients Mission
Authors:
Varun Bhalerao,
Disha Sawant,
Archana Pai,
Shriharsh Tendulkar,
Santosh Vadawale,
Dipankar Bhattacharya,
Vikram Rana,
Hitesh Kumar L. Adalja,
G C Anupama,
Suman Bala,
Smaranika Banerjee,
Judhajeet Basu,
Hrishikesh Belatikar,
Paz Beniamini,
Mahesh Bhaganagare,
Ankush Bhaskar,
Soumyadeep Bhattacharjee,
Sukanta Bose,
Brad Cenko,
Mehul Vijay Chanda,
Gulab Dewangan,
Vishal Dixit,
Anirban Dutta,
Priyanka Gawade,
Abhijeet Ghodgaonkar
, et al. (50 additional authors not shown)
Abstract:
We present the science case for the proposed Daksha high energy transients mission. Daksha will comprise of two satellites covering the entire sky from 1~keV to $>1$~MeV. The primary objectives of the mission are to discover and characterize electromagnetic counterparts to gravitational wave source; and to study Gamma Ray Bursts (GRBs). Daksha is a versatile all-sky monitor that can address a wide…
▽ More
We present the science case for the proposed Daksha high energy transients mission. Daksha will comprise of two satellites covering the entire sky from 1~keV to $>1$~MeV. The primary objectives of the mission are to discover and characterize electromagnetic counterparts to gravitational wave source; and to study Gamma Ray Bursts (GRBs). Daksha is a versatile all-sky monitor that can address a wide variety of science cases. With its broadband spectral response, high sensitivity, and continuous all-sky coverage, it will discover fainter and rarer sources than any other existing or proposed mission. Daksha can make key strides in GRB research with polarization studies, prompt soft spectroscopy, and fine time-resolved spectral studies. Daksha will provide continuous monitoring of X-ray pulsars. It will detect magnetar outbursts and high energy counterparts to Fast Radio Bursts. Using Earth occultation to measure source fluxes, the two satellites together will obtain daily flux measurements of bright hard X-ray sources including active galactic nuclei, X-ray binaries, and slow transients like Novae. Correlation studies between the two satellites can be used to probe primordial black holes through lensing. Daksha will have a set of detectors continuously pointing towards the Sun, providing excellent hard X-ray monitoring data. Closer to home, the high sensitivity and time resolution of Daksha can be leveraged for the characterization of Terrestrial Gamma-ray Flashes.
△ Less
Submitted 27 January, 2024; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Branched flows of flexural elastic waves in non-uniform cylindrical shells
Authors:
Kevin Jose,
Neil Ferguson,
Atul Bhaskar
Abstract:
Propagation of elastic waves along the axis of cylindrical shells is of great current interest due to their ubiquitous presence and technological importance. Geometric imperfections and spatial variations of properties are inevitable in such structures. Here we report the existence of branched flows of flexural waves in such waveguides. The location of high amplitude motion, away from the launch l…
▽ More
Propagation of elastic waves along the axis of cylindrical shells is of great current interest due to their ubiquitous presence and technological importance. Geometric imperfections and spatial variations of properties are inevitable in such structures. Here we report the existence of branched flows of flexural waves in such waveguides. The location of high amplitude motion, away from the launch location, scales as a power law with respect to the variance and linearly with respect to the correlation length of the spatial variation in the bending stiffness. These scaling laws are then theoretically derived from the ray equations. Numerical integration of the ray equations also exhibit this behaviour-consistent with finite element numerical simulations as well as the theoretically derived scaling. There appears to be a universality for the exponents in the scaling with respect to similar observations in the past for other types of waves, as well as flexural and hence dispersive waves in elastic plates.
△ Less
Submitted 1 November, 2022;
originally announced November 2022.
-
Integrity 2022: Integrity in Social Networks and Media
Authors:
Lluís Garcia-Pueyo,
Panayiotis Tsaparas,
Anand Bhaskar,
Prathyusha Senthil Kumar,
Roelof van Zwol,
Timos Sellis,
Anthony McCosker,
Paolo Papotti
Abstract:
This is the proposal for the third edition of the Workshop on Integrity in Social Networks and Media, Integrity 2022, following the success of the first two Workshops held in conjunction with the 13th & 14th ACM Conference on Web Search and Data Mining (WSDM) in 2020 and 2021. The goal of the workshop is to bring together researchers and practitioners to discuss content and interaction integrity c…
▽ More
This is the proposal for the third edition of the Workshop on Integrity in Social Networks and Media, Integrity 2022, following the success of the first two Workshops held in conjunction with the 13th & 14th ACM Conference on Web Search and Data Mining (WSDM) in 2020 and 2021. The goal of the workshop is to bring together researchers and practitioners to discuss content and interaction integrity challenges in social networks and social media platforms. The event consists of (1) a series of invited talks by reputed members of the Integrity community from both academia and industry, (2) a call-for-papers for contributed talks and posters, and (3) a panel with the speakers.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Observation of Alfven wave in ICME-HSS interaction region
Authors:
Omkar Dhamane,
Anil Raghav,
Zubair Shaikh,
Utsav Panchal,
Kalpesh Ghag,
Prathmesh Tari,
Komal Chorghe,
Ankush Bhaskar,
Daniele Telloni,
Wageesh Mishra
Abstract:
The Alfvén wave (AW) is the most common fluctuation present within the emitted solar wind from the Sun. Moreover, the interaction between interplanetary coronal mass ejection (ICME) and high-speed stream (HSS) has been observed on several occasions. However, can such interaction generate an AW? What will be the nature of AW in such a scenario remains an open question. To answer it, we have investi…
▽ More
The Alfvén wave (AW) is the most common fluctuation present within the emitted solar wind from the Sun. Moreover, the interaction between interplanetary coronal mass ejection (ICME) and high-speed stream (HSS) has been observed on several occasions. However, can such interaction generate an AW? What will be the nature of AW in such a scenario remains an open question. To answer it, we have investigated an ICME-HSS interaction event observed on 21st October 1999 at 1 AU by Wind spacecraft. We have used the Walén test to identify AW and estimated Elsasser variables to find the characteristics of the AWs. We explicitly find that ICME were dominant with Sunward AWs, whereas the trailing HSS has strong anti-Sunward AW. We suggest that the ICME-HSS interaction deforms the MC of the ICME, resulting in the AWs inside the MC. In addition, the existence of reconnection within the ICME early stage can also be the leading cause of the origin of AW within it.
△ Less
Submitted 16 February, 2023; v1 submitted 10 September, 2022;
originally announced September 2022.
-
Synchronization in pairs of opto-thermally driven mechanically coupled micro-oscillators
Authors:
Aditya Bhaskar,
Mark Walth,
Richard H. Rand,
Alan T. Zehnder
Abstract:
We study the phenomenon of synchronization in pairs of doubly clamped, mechanically coupled silicon micro-oscillators. A continuous-wave laser beam is used to drive the micro-beams into limit cycle oscillations and to detect the oscillations using interferometry. Devices of different dimensions are used to introduce frequency detuning, and short silicon bridges connecting the micro-beams are used…
▽ More
We study the phenomenon of synchronization in pairs of doubly clamped, mechanically coupled silicon micro-oscillators. A continuous-wave laser beam is used to drive the micro-beams into limit cycle oscillations and to detect the oscillations using interferometry. Devices of different dimensions are used to introduce frequency detuning, and short silicon bridges connecting the micro-beams are used as mechanical coupling between the oscillators. The region of synchronization is plotted for the MEMS system in the detuning vs. coupling parameter space and compared with the numerical analysis of a corresponding, lumped-parameter model. Three states of oscillations are observed i.e. the drift state, quasi-periodic state, and the synchronized state. The numerical model also distinguishes between in-phase and out-of-phase synchronization where out-of-phase synchronization is observed at low coupling strengths and low frequency detuning.
△ Less
Submitted 23 December, 2022; v1 submitted 19 July, 2022;
originally announced July 2022.
-
Realizability Problem for Constraint LTL
Authors:
Ashwin Bhaskar,
M. Praveen
Abstract:
Constraint linear-time temporal logic (CLTL) is an extension of LTL that is interpreted on sequences of valuations of variables over an infinite domain. The atomic formulas are interpreted as constraints on the valuations. The atomic formulas can constrain valuations over a range of positions along a sequence, with the range being bounded by a parameter depending on the formula. The satisfiability…
▽ More
Constraint linear-time temporal logic (CLTL) is an extension of LTL that is interpreted on sequences of valuations of variables over an infinite domain. The atomic formulas are interpreted as constraints on the valuations. The atomic formulas can constrain valuations over a range of positions along a sequence, with the range being bounded by a parameter depending on the formula. The satisfiability and model checking problems for CLTL have been studied by Demri and D'Souza. We consider the realizability problem for CLTL. The set of variables is partitioned into two parts, with each part controlled by a player. Players take turns to choose valuations for their variables, generating a sequence of valuations. The winning condition is specified by a CLTL formula -- the first player wins if the sequence of valuations satisfies the specified formula. We study the decidability of checking whether the first player has a winning strategy in the realizability game for a given CLTL formula. We prove that it is decidable in the case where the domain satisfies the completion property, a property introduced by Balbiani and Condotta in the context of satisfiability. We prove that it is undecidable over $(\mathbb{Z},<,=)$, the domain of integers with order and equality. We prove that over $(\mathbb{Z},<,=)$, it is decidable if the atomic constraints in the formula can only constrain the current valuations of variables belonging to the second player, but there are no such restrictions for the variables belonging to the first player. We call this single-sided games.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
LTL with Local and Remote Data Constraints
Authors:
Ashwin Bhaskar
Abstract:
We consider an extension of linear-time temporal logic (LTL) with both local and remote data constraints interpreted over a concrete domain. This extension is a natural extension of constraint LTL and the Temporal Logic of Repeating Values, which have been studied before. We shall use previous results to prove that the satisfiability problem for this logic is decidable. Further, we shall see that…
▽ More
We consider an extension of linear-time temporal logic (LTL) with both local and remote data constraints interpreted over a concrete domain. This extension is a natural extension of constraint LTL and the Temporal Logic of Repeating Values, which have been studied before. We shall use previous results to prove that the satisfiability problem for this logic is decidable. Further, we shall see that trying to extend this logic by making it more expressive can lead to undecidability.
△ Less
Submitted 30 May, 2022;
originally announced June 2022.
-
Leptoquark-assisted Singlet-mediated Di-Higgs Production at the LHC
Authors:
Arvind Bhaskar,
Debottam Das,
Bibhabasu De,
Subhadip Mitra,
Aruna Kumar Nayak,
Cyrin Neeraj
Abstract:
At the LHC, the gluon-initiated processes are considered to be the primary source of di-Higgs production. However, in the presence of a new resonance, the light-quark initiated processes can also contribute significantly. In this paper, we look at the di-Higgs production mediated by a new singlet scalar. The singlet is produced in both quark-antiquark and gluon fusion processes through loops invol…
▽ More
At the LHC, the gluon-initiated processes are considered to be the primary source of di-Higgs production. However, in the presence of a new resonance, the light-quark initiated processes can also contribute significantly. In this paper, we look at the di-Higgs production mediated by a new singlet scalar. The singlet is produced in both quark-antiquark and gluon fusion processes through loops involving a scalar leptoquark and right-handed neutrinos. With benchmark parameters inspired from the recent resonant di-Higgs searches by the ATLAS collaboration, we examine the prospects of such a resonance in the TeV-range at the High-Luminosity LHC (HL-LHC) in the $b\bar{b} τ^{+}τ^{-}$ mode with a multivariate analysis. We obtain the $5σ$ and $2σ$ contours and find that a significant part of the parameter space is within the reach of the HL-LHC.
△ Less
Submitted 4 August, 2022; v1 submitted 24 May, 2022;
originally announced May 2022.
-
Combined explanation of $W$-mass, muon $g-2$, $R_{K^{(*)}}$ and $R_{D^{(*)}}$ anomalies in a singlet-triplet scalar leptoquark model
Authors:
Arvind Bhaskar,
Anirudhan A. Madathil,
Tanumoy Mandal,
Subhadip Mitra
Abstract:
In addition to the long-standing anomalies seen in the muon $g-2$, $R_{K^{(*)}}$, and $R_{D^{(*)}}$ observables by various independent experiments, the CDF Collaboration has found another significant one in the $W$-boson mass. These anomalies might be intertwined at a fundamental level and have a single new-physics explanation. In this paper, we present a simultaneous solution to these anomalies w…
▽ More
In addition to the long-standing anomalies seen in the muon $g-2$, $R_{K^{(*)}}$, and $R_{D^{(*)}}$ observables by various independent experiments, the CDF Collaboration has found another significant one in the $W$-boson mass. These anomalies might be intertwined at a fundamental level and have a single new-physics explanation. In this paper, we present a simultaneous solution to these anomalies with two scalar leptoquarks of roughly equal mass -- one weak-singlet $S_1$ and the other a weak-triplet $S_3$ -- which mix through a Higgs portal. The solution has only a few new couplings and TeV-scale leptoquarks, making the solution testable at the LHC. We put a lower and upper bound on the leptoquark masses in this setup from the current LHC data and the assumption that all new couplings are within the perturbative limit.
△ Less
Submitted 18 November, 2022; v1 submitted 19 April, 2022;
originally announced April 2022.
-
Data-Driven Mitigation of Adversarial Text Perturbation
Authors:
Rasika Bhalerao,
Mohammad Al-Rubaie,
Anand Bhaskar,
Igor Markov
Abstract:
Social networks have become an indispensable part of our lives, with billions of people producing ever-increasing amounts of text. At such scales, content policies and their enforcement become paramount. To automate moderation, questionable content is detected by Natural Language Processing (NLP) classifiers. However, high-performance classifiers are hampered by misspellings and adversarial text p…
▽ More
Social networks have become an indispensable part of our lives, with billions of people producing ever-increasing amounts of text. At such scales, content policies and their enforcement become paramount. To automate moderation, questionable content is detected by Natural Language Processing (NLP) classifiers. However, high-performance classifiers are hampered by misspellings and adversarial text perturbations. In this paper, we classify intentional and unintentional adversarial text perturbation into ten types and propose a deobfuscation pipeline to make NLP models robust to such perturbations. We propose Continuous Word2Vec (CW2V), our data-driven method to learn word embeddings that ensures that perturbations of words have embeddings similar to those of the original words. We show that CW2V embeddings are generally more robust to text perturbations than embeddings based on character ngrams. Our robust classification pipeline combines deobfuscation and classification, using proposed defense methods and word embeddings to classify whether Facebook posts are requesting engagement such as likes. Our pipeline results in engagement bait classification that goes from 0.70 to 0.67 AUC with adversarial text perturbation, while character ngram-based word embedding methods result in downstream classification that goes from 0.76 to 0.64.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Bistability in coupled opto-thermal micro-oscillators
Authors:
Aditya Bhaskar,
Mark Walth,
Richard H. Rand,
Alan T. Zehnder
Abstract:
In this work, we experimentally investigate the dynamics of pairs of opto-thermally driven, mechanically coupled, doubly clamped, silicon micromechanical oscillators, and numerically investigate the dynamics of the corresponding lumped-parameter model. Coupled limit cycle oscillators exhibit striking nonlinear dynamics and bifurcations in response to variations in system parameters. We show that t…
▽ More
In this work, we experimentally investigate the dynamics of pairs of opto-thermally driven, mechanically coupled, doubly clamped, silicon micromechanical oscillators, and numerically investigate the dynamics of the corresponding lumped-parameter model. Coupled limit cycle oscillators exhibit striking nonlinear dynamics and bifurcations in response to variations in system parameters. We show that the input laser power influences the frequency detuning between two non-identical oscillators. As the laser power is varied, different regimes of oscillations such as the synchronized state, the drift state, and the quasi-periodic state are mapped at minimal and high coupling strengths. For non-identical oscillators, coexistence of two states, the synchronized state and the quasi-periodic state, is demonstrated at high coupling and high laser power. Experimentally, this bistability manifests as irregular oscillations as the system rapidly switches between the two states due to the system's sensitive dependence on initial conditions in the presence of noise. We provide a qualitative comparison of the experimental and numerical results to elucidate the behavior of the system.
△ Less
Submitted 19 April, 2022; v1 submitted 30 December, 2021;
originally announced December 2021.
-
Continuum modeling of freeway traffic flows: State-of-the-art, challenges and future directions in the era of connected and automated vehicles
Authors:
Saeed Mohammadian,
Zuduo Zheng,
Md. Mazharul Haque,
Ashish Bhaskar
Abstract:
Connected and automated vehicles (CAVs) are expected to reshape traffic flow dynamics and present new challenges and opportunities for traffic flow modeling. While numerous studies have proposed optimal modeling and control strategies for CAVs with various objectives (e.g., traffic efficiency and safety), there are uncertainties about the flow dynamics of CAVs in real-world traffic. The uncertaint…
▽ More
Connected and automated vehicles (CAVs) are expected to reshape traffic flow dynamics and present new challenges and opportunities for traffic flow modeling. While numerous studies have proposed optimal modeling and control strategies for CAVs with various objectives (e.g., traffic efficiency and safety), there are uncertainties about the flow dynamics of CAVs in real-world traffic. The uncertainties are especially amplified for mixed traffic flows, consisting of CAVs and human-driven vehicles, where the implications can be significant from the continuum-modeling perspective, which aims to capture macroscopic traffic flow dynamics based on hyperbolic systems of partial differential equations. This paper aims to highlight and discuss some essential problems in continuum modeling of real-world freeway traffic flows in the era of CAVs. We first provide a select review of some existing continuum models for conventional human-driven traffic as well as the recent attempts for incorporating CAVs into the continuum-modeling framework. Wherever applicable, we provide new insights about the properties of existing models and revisit their implications for traffic flows of CAVs using recent empirical observations with CAVs and the previous discussions and debates in the literature. The paper then discusses some major problems inherent to continuum modeling of real-world (mixed) CAV traffic flows modeling by distinguishing between two major research directions: (a) modeling for explaining purposes, where making reproducible inferences about the physical aspects of macroscopic properties is of the primary interest, and (b) modeling for practical purposes, in which the focus is on the reliable predictions for operation and control. The paper proposes some potential solutions in each research direction and recommends some future research topics.
△ Less
Submitted 29 November, 2023; v1 submitted 8 November, 2021;
originally announced November 2021.
-
Precise LHC limits on the $\rm{U}_1$ leptoquark parameter space
Authors:
Arvind Bhaskar,
Diganta Das,
Tanumoy Mandal,
Subhadip Mitra,
Cyrin Neeraj
Abstract:
A TeV scale leptoquark (LQ) is one of the promising explanations of the recent anomalies in the semileptonic decays of $B$ mesons. Among the various LQs, the vector $\rm{U}_1$ is capable of explaining the anomalies in both $R_{D^{(*)}}$ and $R_{K^{(*)}}$ observables. We use the current LHC data to put bounds on the parameter space of $\rm{U}_1$ relevant for the anomalies. Precise bounds are drawn…
▽ More
A TeV scale leptoquark (LQ) is one of the promising explanations of the recent anomalies in the semileptonic decays of $B$ mesons. Among the various LQs, the vector $\rm{U}_1$ is capable of explaining the anomalies in both $R_{D^{(*)}}$ and $R_{K^{(*)}}$ observables. We use the current LHC data to put bounds on the parameter space of $\rm{U}_1$ relevant for the anomalies. Precise bounds are drawn by recasting the latest $ττ$ and $μμ$ searches by the ATLAS and CMS collaborations. We find that it is imperative to include the resonant production modes for obtaining limits in the low mass regions. For higher mass points, the non-resonant production modes play a dominant role.
△ Less
Submitted 29 January, 2022; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Temporal Variations of the Three Geomagnetic Field Components at Colaba Observatory around the Carrington Storm in 1859
Authors:
Hisashi Hayakawa,
Heikki Nevanlinna,
Séan P. Blake,
Yusuke Ebihara,
Ankush T. Bhaskar,
Yoshizumi Miyoshi
Abstract:
The Carrington storm in 1859 September has been arguably identified as the greatest geomagnetic storm ever recorded. However, its exact magnitude and chronology remain controversial, while their source data have been derived from the Colaba H magnetometer. Here, we have located the Colaba 1859 yearbook, containing hourly measurements and spot measurements. We have reconstructed the Colaba geomagne…
▽ More
The Carrington storm in 1859 September has been arguably identified as the greatest geomagnetic storm ever recorded. However, its exact magnitude and chronology remain controversial, while their source data have been derived from the Colaba H magnetometer. Here, we have located the Colaba 1859 yearbook, containing hourly measurements and spot measurements. We have reconstructed the Colaba geomagnetic disturbances in the horizontal component (ΔH), the eastward component (ΔY), and the vertical component (ΔZ) around the time of the Carrington storm. On their basis, we have chronologically revised the ICME transit time as =< 17.1 hrs and located the ΔH peak at 06:20 -- 06:25 UT, revealing a magnitude discrepancy between the hourly and spot measurements (-1691 nT vs. -1263 nT). Furthermore, we have newly derived the time series of ΔY and ΔZ, which peaked at ΔY ~ 378 nT (05:50 UT) and 377 nT (06:25 UT), and ΔZ ~ -173 nT (06:40 UT). We have also computed the hourly averages and removed the solar quiet (Sq) field variations from each geomagnetic component to derive their hourly variations with latitudinal weighting. Our calculations have resulted in the disturbance variations (Dist) with latitudinal weighting of Dist Y ~ 328 nT and Dist Z ~ -36 nT, and three scenarios of Dist H ~ -918, -979, and -949 nT, which also approximate the minimum Dst. These data may suggest preconditioning of the geomagnetic field after the August storm (ΔH =< -570 nT), which made the September storm even more geoeffective.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Accelerated consensus in multi-agent networks via memory of local averages
Authors:
Aditya Bhaskar,
Shriya Rangarajan,
Vikram Shree,
Mark Campbell,
Francesca Parise
Abstract:
Classical mathematical models of information sharing and updating in multi-agent networks use linear operators. In the paradigmatic DeGroot model, agents update their states with linear combinations of their neighbors' current states. In prior work, an accelerated averaging model employing the use of memory has been suggested to accelerate convergence to a consensus state for undirected networks.…
▽ More
Classical mathematical models of information sharing and updating in multi-agent networks use linear operators. In the paradigmatic DeGroot model, agents update their states with linear combinations of their neighbors' current states. In prior work, an accelerated averaging model employing the use of memory has been suggested to accelerate convergence to a consensus state for undirected networks. There, the DeGroot update on the current states is followed by a linear combination with the previous states. We propose a modification where the DeGroot update is applied to the current and previous states and is then followed by a linear combination step. We show that this simple modification applied to undirected networks permits convergence even for periodic networks. Further, it allows for faster convergence than the DeGroot and accelerated averaging models for suitable networks and model parameters.
△ Less
Submitted 25 September, 2021;
originally announced September 2021.
-
Mitigation of substrate coupling effects in RF switch by localized substrate removal using laser processing
Authors:
Arun Bhaskar,
Justine Philippe,
Etienne Okada,
Flavie Braud,
Jean-François Robillard,
Cédric Durand,
Frédéric Gianesello,
Daniel Gloria,
Christophe Gaquière,
Emmanuel Dubois
Abstract:
With the evolution of radio frequency (RF)/microwave technology, there is a demand for circuits which are able to meet highly challenging RF frontend specifications. Silicon-on-insulator (SOI) technology is one of the leading platforms for upcoming wireless generation. The degradation of performance due to substrate coupling is a key problem to address for telecommunication circuits, especially fo…
▽ More
With the evolution of radio frequency (RF)/microwave technology, there is a demand for circuits which are able to meet highly challenging RF frontend specifications. Silicon-on-insulator (SOI) technology is one of the leading platforms for upcoming wireless generation. The degradation of performance due to substrate coupling is a key problem to address for telecommunication circuits, especially for the high throw count switches in RF frontends. In this context, a novel technique for local substrate removal is developed to fabricate membranes of mm-sized RF switch which allows for total etching of silicon handler. RF characterization of membranes reveal a superior linearity performance with lowering of 2nd harmonic by 17.7 dB and improvement in insertion losses by 0.38 dB in comparison with High-Resistivity SOI substrates. This improvement leads to a significant increase in frontend efficiency. These results demonstrate a new route for optimization of circuit performance using post-fabrication substrate processing techniques.
△ Less
Submitted 24 August, 2021;
originally announced September 2021.
-
Forecasting GICs and geoelectric fields from solar wind data using LSTMs: application in Austria
Authors:
R. L. Bailey,
R. Leonhardt,
C. Möstl,
C. Beggan,
M. A. Reiss,
A. Bhaskar,
A. J. Weiss
Abstract:
The forecasting of local GIC effects has largely relied on the forecasting of dB/dt as a proxy and, to date, little attention has been paid to directly forecasting the geoelectric field or GICs themselves. We approach this problem with machine learning tools, specifically recurrent neural networks or LSTMs by taking solar wind observations as input and training the models to predict two different…
▽ More
The forecasting of local GIC effects has largely relied on the forecasting of dB/dt as a proxy and, to date, little attention has been paid to directly forecasting the geoelectric field or GICs themselves. We approach this problem with machine learning tools, specifically recurrent neural networks or LSTMs by taking solar wind observations as input and training the models to predict two different kinds of output: first, the geoelectric field components Ex and Ey; and second, the GICs in specific substations in Austria. The training is carried out on the geoelectric field and GICs modelled from 26 years of one-minute geomagnetic field measurements, and results are compared to GIC measurements from recent years. The GICs are generally predicted better by an LSTM trained on values from a specific substation, but only a fraction of the largest GICs are correctly predicted. This model had a correlation with measurements of around 0.6, and a root-mean-square error of 0.7 A. The probability of detecting mild activity in GICs is around 50%, and 15% for larger GICs.
△ Less
Submitted 16 February, 2022; v1 submitted 14 September, 2021;
originally announced September 2021.
-
Enumeration of binary trees compatible with a perfect phylogeny
Authors:
Julia A. Palacios,
Anand Bhaskar,
Filippo Disanto,
Noah A. Rosenberg
Abstract:
Evolutionary models used for describing molecular sequence variation suppose that at a non-recombining genomic segment, sequences share ancestry that can be represented as a genealogy--a rooted, binary, timed tree, with tips corresponding to individual sequences. Under the infinitely-many-sites mutation model, mutations are randomly superimposed along the branches of the genealogy, so that every m…
▽ More
Evolutionary models used for describing molecular sequence variation suppose that at a non-recombining genomic segment, sequences share ancestry that can be represented as a genealogy--a rooted, binary, timed tree, with tips corresponding to individual sequences. Under the infinitely-many-sites mutation model, mutations are randomly superimposed along the branches of the genealogy, so that every mutation occurs at a chromosomal site that has not previously mutated; if a mutation occurs at an interior branch, then all individuals descending from that branch carry the mutation. The implication is that observed patterns of molecular variation from this model impose combinatorial constraints on the hidden state space of genealogies. In particular, observed molecular variation can be represented in the form of a perfect phylogeny, a tree structure that fully encodes the mutational differences among sequences. For a sample of n sequences, a perfect phylogeny might not possess n distinct leaves, and hence might be compatible with many possible binary tree structures that could describe the evolutionary relationships among the n sequences. Here, we investigate enumerative properties of the set of binary ranked and unranked tree shapes that are compatible with a perfect phylogeny, and hence, the binary ranked and unranked tree shapes conditioned on an observed pattern of mutations under the infinitely-many-sites mutation model. We provide a recursive enumeration of these shapes. We consider both perfect phylogenies that can be represented as binary and those that are multifurcating. The results have implications for computational aspects of the statistical inference of evolutionary parameters that underlie sets of molecular sequences.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
Improving third-generation leptoquark searches with combined signals and boosted top
Authors:
Arvind Bhaskar,
Tanumoy Mandal,
Subhadip Mitra,
Mohit Sharma
Abstract:
Search strategies for the third-generation leptoquarks (LQs) are distinct from other LQ searches, especially when they decay to a top quark and a $τ$ lepton. We investigate the cases of all TeV-scale scalar and vector LQs that decay to either a top-tau pair (charge-$1/3$ and $5/3$ LQs) or a top-neutrino pair (charge-$2/3$ LQs). One can then use the boosted top (which can be tagged efficiently usin…
▽ More
Search strategies for the third-generation leptoquarks (LQs) are distinct from other LQ searches, especially when they decay to a top quark and a $τ$ lepton. We investigate the cases of all TeV-scale scalar and vector LQs that decay to either a top-tau pair (charge-$1/3$ and $5/3$ LQs) or a top-neutrino pair (charge-$2/3$ LQs). One can then use the boosted top (which can be tagged efficiently using jet-substructure techniques) and high-$p_{\rm T}$ $τ$ leptons to search for these LQs. We consider two search channels with either one or two taus along with at least one hadronically decaying boosted top quark. We estimate the high luminosity LHC (HL-LHC) search prospects of these LQs by considering both symmetric and asymmetric pair and single production processes. Our selection criteria are optimised to retain events from both pair and single production processes. The combined signal has better prospects than the traditional searches. We include new three-body single production processes to enhance the single production contributions to the combined signal. We identify the interference effect that appears in the dominant single production channel of charge-$1/3$ scalar LQ ($S^{1/3}$). This interference is constructive if $S^{1/3}$ is weak-triplet and destructive, for a singlet one. As a result, their LHC prospects differ appreciably.
△ Less
Submitted 29 January, 2022; v1 submitted 14 June, 2021;
originally announced June 2021.
-
LHC Bounds on $R_{D^{(*)}}$ motivated Leptoquark Models
Authors:
Arvind Bhaskar,
Tanumoy Mandal,
Subhadip Mitra,
Cyrin Neeraj,
Swapnil Raz
Abstract:
Most of the popular explanations of the observed anomalies in the semileptonic $B$-meson decays involve TeV scale Leptoquarks (LQs). Among the various possible LQ models, two particular LQs -- $S_{1}(3, 1, 1/3)$ and $U_{1}(3, 1, 2/3)$ seem to be most promising. Here, we use current LHC data to constrain the $S_{1}(3, 1, 1/3)$ and $U_{1}(3, 1, 2/3)$ parameter spaces relevant for the $R_{D^{(*)}}$ o…
▽ More
Most of the popular explanations of the observed anomalies in the semileptonic $B$-meson decays involve TeV scale Leptoquarks (LQs). Among the various possible LQ models, two particular LQs -- $S_{1}(3, 1, 1/3)$ and $U_{1}(3, 1, 2/3)$ seem to be most promising. Here, we use current LHC data to constrain the $S_{1}(3, 1, 1/3)$ and $U_{1}(3, 1, 2/3)$ parameter spaces relevant for the $R_{D^{(*)}}$ observables. We recast the latest ATLAS $ττ$ resonance search data to obtain new exclusion limits. For this purpose, we consider both resonant (pair and single productions) and non-resonant ($t$-channel LQ exchange) productions of these LQs at the LHC. For the limits, the most dominant contribution comes from the (destructive) interference of the non-resonant production with Standard Model backgrounds. The combined contribution from the pair and inclusive single production processes is less prominent but non-negligible. The limits we get are independent and competitive to other known bounds. For both the models, we set limits on $R_{D^{(*)}}$ motivated couplings.
△ Less
Submitted 15 May, 2021;
originally announced May 2021.
-
Precise limits on the charge-$2/3$ $U_1$ vector leptoquark
Authors:
Arvind Bhaskar,
Diganta Das,
Tanumoy Mandal,
Subhadip Mitra,
Cyrin Neeraj
Abstract:
The $U_1$ leptoquark is known to be a suitable candidate for explaining the semileptonic $B$-decay anomalies. We derive precise limits on its parameter space relevant for the anomalies from the current LHC high-$p_{\rm T}$ dilepton data. We consider an exhaustive list of possible $B$-anomalies-motivated simple scenarios with one or two new couplings that can also be used as templates for obtaining…
▽ More
The $U_1$ leptoquark is known to be a suitable candidate for explaining the semileptonic $B$-decay anomalies. We derive precise limits on its parameter space relevant for the anomalies from the current LHC high-$p_{\rm T}$ dilepton data. We consider an exhaustive list of possible $B$-anomalies-motivated simple scenarios with one or two new couplings that can also be used as templates for obtaining bounds on more complicated scenarios. To obtain precise limits, we systematically consider all possible $U_1$ production processes that can contribute to the dilepton searches, including the resonant pair and single productions, nonresonant $t$-channel $U_1$ exchange, as well as its large interference with the Standard Model background. We demonstrate how the inclusion of resonant production contributions in the dilepton signal can lead to appreciably improved exclusion limits. We point out new search channels of $U_1$ that can act as unique tests of the flavour-motivated models. The template scenarios can also be used for future $U_1$ searches at the LHC. We compare the LHC limits with other relevant flavour bounds and find that a TeV-scale $U_1$ can accommodate both $R_{D^{(*)}}$ and $R_{K^{(*)}}$ anomalies while satisfying all the bounds.
△ Less
Submitted 13 August, 2021; v1 submitted 28 January, 2021;
originally announced January 2021.
-
A Secured Protocol for IoT Networks
Authors:
Ananth Vishnu Bhaskar,
Ankit Baingane,
Ryan Jahnige,
Qingquan Zhang,
Ting Zhu
Abstract:
Researchers in the past have shown that Symmetric key cryptography is generally considered infeasible and public key cryptography, at times, fails to provide sufficient security and integrity to data. In contrast to this prejudice, our paper presents a novel approach that establishes security to data through encryption techniques like RSA and more importantly it identifies a randomized path to rou…
▽ More
Researchers in the past have shown that Symmetric key cryptography is generally considered infeasible and public key cryptography, at times, fails to provide sufficient security and integrity to data. In contrast to this prejudice, our paper presents a novel approach that establishes security to data through encryption techniques like RSA and more importantly it identifies a randomized path to route messages from source to the destination and ensures that packets are delivered safely even when intermediate nodes are attacked by identifying alternate paths between source and the destination.
△ Less
Submitted 22 December, 2020; v1 submitted 20 December, 2020;
originally announced December 2020.
-
Radiation Belt Response to Fast Reverse Shock at Geosynchronous Orbit
Authors:
Ankush Bhaskar,
David Sibeck,
Shrikanth G. Kanekal,
Howard J. Singer,
Geoffrey Reeves,
Denny M. Oliveira,
Suk-Bin Kang,
Colin Komar
Abstract:
Fast reverse shocks (FRSs) cause the magnetosphere to expand, by contrast to the well-known compressions caused by the impact of fast forward shocks (FFS). Usually, FFSs are more geoeffective than FRSs, and consequently, the inner magnetosphere dynamic responses to both shock types can be quite different. In this study, we investigate for the first time the radiation belt response to an FRS impact…
▽ More
Fast reverse shocks (FRSs) cause the magnetosphere to expand, by contrast to the well-known compressions caused by the impact of fast forward shocks (FFS). Usually, FFSs are more geoeffective than FRSs, and consequently, the inner magnetosphere dynamic responses to both shock types can be quite different. In this study, we investigate for the first time the radiation belt response to an FRS impact using multi-satellite observations and numerical simulations. Spacecraft on the dayside observed decreases in magnetic field strength and energetic (~ 40-475 keV) particle fluxes. Timing analysis shows that the magnetic field signature propagated from the dayside to the nightside magnetosphere. Particles with different energies vary simultaneously at each spacecraft, implying a non-dispersive particle response to the shock. Spacecraft located at lower L-shells did not record any significant signatures. The observations indicate a local time dependence of the response associated with the shock inclination, with the clearest signatures being observed in the dusk-midnight sector. Simulations underestimate the amplitude of the magnetic field variations observed on the nightside. The observed decreases in the electron intensities result from a combination of radial gradient and adiabatic effects. The radial gradients in the spectral index appear to be the dominant contributor to the observed variations of electrons seen on the dayside (near noon and dusk) and on the nightside (near midnight). This study shows that even an FRS can affect the radiation belts significantly and provides an opportunity to understand their dynamic response to a sudden expansion of the magnetosphere.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
The intensity and evolution of the extreme storms in January 1938
Authors:
Hisashi Hayakawa,
Kentaro Hattori,
Alexei A. Pevtsov,
Yusuke Ebihara,
Margaret A. Shea,
Ken G. McCracken,
Ioannis A. Daglis,
Ankush Bhaskar,
Paulo Ribeiro,
Delores J. Knipp
Abstract:
Major solar eruptions occasionally direct interplanetary coronal mass ejections (ICMEs) to Earth and cause significant geomagnetic storms and low-latitude aurorae. While single extreme storms are of significant threats to the modern civilization, storms occasionally appear in sequence and, acting synergistically, cause 'perfect storms' at Earth. The stormy interval in January 1938 was one of such…
▽ More
Major solar eruptions occasionally direct interplanetary coronal mass ejections (ICMEs) to Earth and cause significant geomagnetic storms and low-latitude aurorae. While single extreme storms are of significant threats to the modern civilization, storms occasionally appear in sequence and, acting synergistically, cause 'perfect storms' at Earth. The stormy interval in January 1938 was one of such cases. Here, we analyze the contemporary records to reveal its time series on their source active regions, solar eruptions, ICMEs, geomagnetic storms, low-latitude aurorae, and cosmic-ray (CR) variations. Geomagnetic records show that three storms occurred successively on 17/18 January (Dcx ~ -171 nT) on 21/22 January (Dcx ~ -328 nT) and on 25/26 January (Dcx ~ -336 nT). The amplitudes of the cosmic-ray variations and sudden storm commencements show the impact of the first ICME as the largest (~ 6% decrease in CR and 72 nT in SSC) and the ICME associated with the storms that followed as more moderate (~ 3% decrease in CR and 63 nT in SSC; ~ 2% decrease in CR and 63 nT in SSC). Interestingly, a significant solar proton event occurred on 16/17 January and the Cheltenham ionization chamber showed a possible ground level enhancement. During the first storm, aurorae were less visible at mid-latitudes, whereas during the second and third storms, the equatorward boundaries of the auroral oval were extended down to 40.3° and 40.0° in invariant latitude. This contrast shows that the initial ICME was probably faster, with a higher total magnitude but a smaller southward component.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
The Extreme Space Weather Event in February/March 1941
Authors:
Hisashi Hayakawa,
Sean P. Blake,
Ankush Bhaskar,
Kentaro Hattori,
Denny M. Oliveira,
Yusuke Ebihara
Abstract:
Given the infrequency of extreme geomagnetic storms, it is significant to note the concentration of three extreme geomagnetic storms in 1941, whose intensities ranked fourth, twelfth, and fifth within the aa index between 1868-2010. Among them, the geomagnetic storm on 1 March 1941 was so intense that three of the four Dst station magnetograms went off scale. Herein, we reconstruct its time series…
▽ More
Given the infrequency of extreme geomagnetic storms, it is significant to note the concentration of three extreme geomagnetic storms in 1941, whose intensities ranked fourth, twelfth, and fifth within the aa index between 1868-2010. Among them, the geomagnetic storm on 1 March 1941 was so intense that three of the four Dst station magnetograms went off scale. Herein, we reconstruct its time series and measure the storm intensity with an alternative Dst estimate (Dst*). The source solar eruption at 09:29 - 09:38 GMT on 28 February was located at RGO AR 13814 and its significant intensity is confirmed by large magnetic crochets of 35 nT measured at Abinger. This solar eruption most likely released a fast interplanetary coronal mass ejection with estimated speed 2260 km/s. After its impact at 03:57 - 03:59 GMT on 1 March, an extreme magnetic storm was recorded worldwide. Comparative analyses on the contemporary magnetograms show the storm peak intensity of minimum Dst* < -464 nT at 16 GMT, comparable to the most and the second most extreme magnetic storms within the standard Dst index since 1957. This storm triggered significant low-latitude aurorae in the East Asian sector and their equatorward boundary has been reconstructed as 38.5° in invariant latitude. This result agrees with British magnetograms which indicate auroral oval moving above Abinger at 53.0° in magnetic latitude. The storm amplitude was even more enhanced in equatorial stations and consequently casts caveats on their usage for measurements of the storm intensity in Dst estimates.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Large-area femtosecond laser milling of silicon employing trench analysis
Authors:
Arun Bhaskar,
Justine Philippe,
Flavie Braud,
Etienne Okada,
Vanessa Avramovic,
Jean-François Robillard,
Cédric Durand,
Daniel Gloria,
Christophe Gaquière,
Emmanuel Dubois
Abstract:
A femtosecond laser is a powerful tool for micromachining of silicon. In this work, large-area laser ablation of crystalline silicon is comprehensively studied using a laser source of pulse width 300 fs at two wavelengths of 343 nm and 1030 nm. We develop a unique approach to gain insight into the laser milling process by means of detailed analysis of trenches. Laser scribed trenches and milled ar…
▽ More
A femtosecond laser is a powerful tool for micromachining of silicon. In this work, large-area laser ablation of crystalline silicon is comprehensively studied using a laser source of pulse width 300 fs at two wavelengths of 343 nm and 1030 nm. We develop a unique approach to gain insight into the laser milling process by means of detailed analysis of trenches. Laser scribed trenches and milled areas are characterized using optical profilometry to extract dimensional and roughness parameters with accuracy and repeatability. In a first step, multiple measures of the trench including the average depth, the volume of recast material, the average longitudinal profile roughness, the inner trench width and the volume removal rate are studied. This allows for delineation of ablation regimes and associated characteristics allowing to determine the impact of fluence and repetition rate on laser milling. In a second step, additional factors of debris formation and material redeposition that come into play during laser milling are further elucidated. These results are utilized for processing large-area (up to few mm2) with milling depths up to 200 μm to enable the fabrication of cavities with low surface roughness at high removal rates of up to 6.9 μm3 μs-1. Finally, laser processing in combination with XeF2 etching is applied on SOI-CMOS technology in the fabrication of radio-frequency (RF) functions standing on suspended membranes. Performance is considerably improved on different functions like RF switch (23 dB improvement in 2nd harmonic), inductors (near doubling of Q-factor) and LNA (noise figure improvement of 0.1 dB) demonstrating the applicability of milling to radio-frequency applications.
△ Less
Submitted 30 August, 2020;
originally announced August 2020.
-
Substrate engineering of inductors on SOI for improvement of Q-factor and application in LNA
Authors:
Arun Bhaskar,
Justine Philippe,
Vanessa Avramovic,
Flavie Braud,
Jean-François Robillard,
Cédric Durand,
Daniel Gloria,
Christophe Gaquiere,
Emmanuel Dubois
Abstract:
High Q-factor inductors are critical in designing high performance RF/microwave circuits on SOI technology. Substrate losses is a key limiting factor when designing inductors with high Q-factors. In this context, we report a substrate engineering method that enables improvement of quality factors of already fabricated inductors on SOI. A novel femtosecond laser milling process is utilized for the…
▽ More
High Q-factor inductors are critical in designing high performance RF/microwave circuits on SOI technology. Substrate losses is a key limiting factor when designing inductors with high Q-factors. In this context, we report a substrate engineering method that enables improvement of quality factors of already fabricated inductors on SOI. A novel femtosecond laser milling process is utilized for the fabrication of locally suspended membranes of inductors with handler silicon completely etched. Such flexible membranes suspended freely on the BOX show up to 92 % improvement in Q factor for single turn inductor. The improvement in Q-factor is reported on large sized inductors due to reduced parallel capacitance which allows enhanced operation of inductors at high frequencies. A compact model extraction methodology has been developed to model inductor membranes. These membranes have been utilized for the improvement of noise performance of LNA working in the 4.9,5.9 GHz range. A 0.1 dB improvement in noise figure has been reported by taking an existing design and suspending the input side inductors of the LNA circuit. The substrate engineering method reported in this work is not only applicable to inductors but also to active circuits, making it a powerful tool for enhancement of RF devices.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Estimating Satellite Orbital Drag During Historical Magnetic Superstorms
Authors:
Denny M. Oliveira,
Eftyhia Zesta,
Hisashi Hayakawa,
Ankush Bhaskar
Abstract:
Understanding extreme space weather events is of paramount importance in efforts to protect technological systems in space and on the ground. Particularly in the thermosphere, the subsequent extreme magnetic storms can pose serious threats to low-Earth orbit (LEO) spacecraft by intensifying errors in orbit predictions. Extreme magnetic storms (minimum Dst $\leq$ --250 nT) are extremely rare: only…
▽ More
Understanding extreme space weather events is of paramount importance in efforts to protect technological systems in space and on the ground. Particularly in the thermosphere, the subsequent extreme magnetic storms can pose serious threats to low-Earth orbit (LEO) spacecraft by intensifying errors in orbit predictions. Extreme magnetic storms (minimum Dst $\leq$ --250 nT) are extremely rare: only 7 events occurred during the era of spacecraft with high-level accelerometers such as CHAMP (CHAllenge Mini-satellite Payload) and GRACE (Gravity Recovery And Climate experiment), and none with minimum Dst $\leq$ --500 nT, here termed magnetic superstorms. Therefore, current knowledge of thermospheric mass density response to superstorms is very limited. Thus, in order to advance this knowledge, four known magnetic superstorms in history, i.e., events occurring before CHAMP's and GRACE's commission times, with complete datasets, are used to empirically estimate density enhancements and subsequent orbital drag. The November 2003 magnetic storm (minimum Dst = --422 nT), the most extreme event observed by both satellites, is used as the benchmark event. Results show that, as expected, orbital degradation is more severe for the most intense storms. Additionally, results clearly point out that the time duration of the storm is strongly associated with storm-time orbital drag effects, being as important as or even more important than storm intensity itself. The most extreme storm-time decays during CHAMP/GRACE-like sample satellite orbits estimated for the March 1989 magnetic superstorm show that long-lasting superstorms can have highly detrimental consequences for the orbital dynamics of satellites in LEO.
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
Elastic stabilisation of wrinkles in thin films by auxetic microstructure
Authors:
Alessandra Bonfanti,
Atul Bhaskar
Abstract:
Thin elastic sheets and membranes are known to wrinkle when they are stretched -- the associated physics is highly non-linear. The mechanics of thin films that exhibit unusual behavior upon stretching, when they possess auxetic structure, i.e. when their apparent Poisson's ratio is negative, is presented here. Wrinkling is now suppressed within the bulk of auxetic films when tensioned, whereas loc…
▽ More
Thin elastic sheets and membranes are known to wrinkle when they are stretched -- the associated physics is highly non-linear. The mechanics of thin films that exhibit unusual behavior upon stretching, when they possess auxetic structure, i.e. when their apparent Poisson's ratio is negative, is presented here. Wrinkling is now suppressed within the bulk of auxetic films when tensioned, whereas localized creases confined to the clamps, that decay away exponentially, appear. These edge wrinkles are characterized for their amplitude and wavelength experimentally, theoretically, and computationally, which show excellent agreement with expected trends. The scaling for amplitude, wavelength and decay rate upon film properties and tension is obtained using simple analyses based on kinematic mismatch resulting from lateral Poisson's expansion.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.