-
Measurement and Modeling of Proton-Induced Reactions on Arsenic from 35 to 200 MeV
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Arjan J. Koning,
Amanda M. Lewis,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}…
▽ More
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}$Se have insufficient nuclear data for efficient production using regional 100-200 MeV high-intensity proton accelerators. In order to address this deficiency, stacked-target irradiations were performed at LBNL, LANL, and BNL to measure the production of the $^{72}$Se/$^{72}$As PET generator system via $^{75}$As(p,x) between 35 and 200 MeV. This work provides the most well-characterized excitation function for $^{75}$As(p,4n)$^{72}$Se starting from threshold. Additional focus was given to report the first measurements of $^{75}$As(p,x)$^{68}$Ge and bolster an already robust production capability for the highly valuable $^{68}$Ge/$^{68}$Ga PET generator. Thick target yield comparisons with prior established formation routes to both generators are made. In total, high-energy proton-induced cross sections are reported for 55 measured residual products from $^{75}$As, Cu, and Ti targets, where the latter two materials were present as monitor foils. These results were compared with literature data as well as the default theoretical calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. Reaction modeling at these energies is typically unsatisfactory due to few prior published data and many interacting physics models. Therefore, a detailed assessment of the TALYS code was performed with simultaneous parameter adjustments applied according to a standardized procedure. Particular attention was paid to the formulation of the two-component exciton model in the transition between the compound and pre-equilibrium regions, with a linked investigation of level density models for nuclei off of stability and their impact on modeling predictive power.
△ Less
Submitted 11 June, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Investigating High-Energy Proton-Induced Reactions on Spherical Nuclei: Implications for the Pre-Equilibrium Exciton Model
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Amanda M. Lewis,
Arjan J. Koning,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction m…
▽ More
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction modes and a lack of existing guiding cross section data. A Tri-lab collaboration has been formed among the Lawrence Berkeley, Los Alamos, and Brookhaven National Laboratories to address these complexities by characterizing charged-particle nuclear reactions relevant to the production of established and novel radioisotopes. In the inaugural collaboration experiments, stacked-targets of niobium foils were irradiated at the Brookhaven Linac Isotope Producer (E$_p$=200 MeV) and the Los Alamos Isotope Production Facility (E$_p$=100 MeV) to measure $^{93}$Nb(p,x) cross sections between 50 and 200 MeV. The measured cross-section results were compared with literature data as well as the default calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. We developed a standardized procedure that determines the reaction model parameters that best reproduce the most prominent reaction channels in a physically justifiable manner. The primary focus of the procedure was to determine the best parametrization for the pre-equilibrium two-component exciton model. This modeling study revealed a trend toward a relative decrease for internal transition rates at intermediate proton energies (E$_p$=20-60 MeV) in the current exciton model as compared to the default values. The results of this work are instrumental for the planning, execution, and analysis essential to isotope production.
△ Less
Submitted 5 April, 2021; v1 submitted 24 October, 2020;
originally announced October 2020.
-
Excitation functions for (p,x) reactions of niobium in the energy range of E$_{\text{p}}$ = 40-90 MeV
Authors:
Andrew S. Voyles,
Lee A. Bernstein,
Eva R. Birnbaum,
Jonathan W. Engle,
Stephen A. Graves,
Toshihiko Kawano,
Amanda M. Lewis,
Francois M. Nortier
Abstract:
A stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory's Isotope Production Facility, to investigate the $^{93}$Nb(p,4n)$^{90}$Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) rea…
▽ More
A stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory's Isotope Production Facility, to investigate the $^{93}$Nb(p,4n)$^{90}$Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) reactions between 40-90 MeV, as well as 5 independent measurements of isomer branching ratios, are reported. These are useful in medical and basic science radionuclide productions at intermediate energies. The $^{\text{nat}}$Cu(p,x)$^{56}$Co, $^{\text{nat}}$Cu(p,x)$^{62}$Zn, and $^{\text{nat}}$Cu(p,x)$^{65}$Zn reactions were used to determine proton fluence, and all activities were quantified using HPGe spectrometry. Variance minimization techniques were employed to reduce systematic uncertainties in proton energy and fluence, improving the reliability of these measurements. The measured cross sections are shown to be in excellent agreement with literature values, and have been measured with improved precision compared with previous measurements. This work also reports the first measurement of the $^{\text{nat}}$Nb(p,x)$^{82\text{m}}$Rb reaction, and of the independent cross sections for $^{\text{nat}}$Cu(p,x)$^{52\text{g}}$Mn and $^{\text{nat}}$Nb(p,x)$^{85\text{g}}$Y in the 40-90 MeV region. The effects of $^{\text{nat}}$Si(p,x)$^{22,24}$Na contamination, arising from silicone adhesive in the Kapton tape used to encapsulate the aluminum monitor foils, is also discussed as a cautionary note to future stacked-target cross section measurements. \emph{A priori} predictions of the reaction modeling codes CoH, EMPIRE, and TALYS are compared with experimentally measured values and used to explore the differences between codes for the $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) reactions.
△ Less
Submitted 21 June, 2018; v1 submitted 18 April, 2018;
originally announced April 2018.
-
Development of holmium-163 electron-capture spectroscopy with transition-edge sensors
Authors:
M. P. Croce,
M. W. Rabin,
V. Mocko,
G. J. Kunde,
E. R. Birnbaum,
E. M. Bond,
J. W. Engle,
A. S. Hoover,
F. M. Nortier,
A. D. Pollington,
W. A. Taylor,
N. R. Weisse-Bernstein,
L. E. Wolfsberg,
J. P. Hays-Wehle,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
T. E. Barnhart,
R. J. Nickles
Abstract:
Calorimetric decay energy spectroscopy of electron-capture-decaying isotopes is a promising method to achieve the sensitivity required for electron neutrino mass measurement. The very low total nuclear decay energy (QEC < 3 keV) and short half-life (4570 y) of 163Ho make it attractive for high-precision electron capture spectroscopy (ECS) near the kinematic endpoint, where the neutrino momentum go…
▽ More
Calorimetric decay energy spectroscopy of electron-capture-decaying isotopes is a promising method to achieve the sensitivity required for electron neutrino mass measurement. The very low total nuclear decay energy (QEC < 3 keV) and short half-life (4570 y) of 163Ho make it attractive for high-precision electron capture spectroscopy (ECS) near the kinematic endpoint, where the neutrino momentum goes to zero. In the ECS approach, an electron-capture-decaying isotope is embedded inside a microcalorimeter designed to capture and measure the energy of all the decay radiation except that of the escaping neutrino. We have developed a complete process for proton-irradiation-based isotope production, isolation, and purification of 163Ho. We have developed transition-edge sensors for this measurement and methods for incorporating 163Ho into high-resolution microcalorimeters, and have measured the electron-capture spectrum of 163Ho. We present our work in these areas and discuss the measured spectrum and its comparison to current theory.
△ Less
Submitted 20 October, 2015; v1 submitted 13 October, 2015;
originally announced October 2015.
-
Nuclear excitation functions from 40-200 MeV proton irradiation of terbium
Authors:
Jonathan W. Engle,
Stepan G. Mashnik,
Lauren A. Parker,
Kevin R. Jackman,
Leo J. Bitteker,
John L. Ullmann,
Mark S. Gulley,
Chandra Pillai,
Kevin D. John,
Eva R. Birnbaum,
Francois M. Nortier
Abstract:
Nuclear formation cross sections are reported for 26 radionuclides, measured with 40 to 200 MeV proton irradiations of terbium foils. These data are relevant to the production of medically relevant radionuclides (e.g., 152Tb, 155Tb, 155Eu, and 156Eu) and to ongoing efforts to characterize stellar nucleosynthesis routes passing through long-lived intermediaries (e.g., 153Gd). Computational predicti…
▽ More
Nuclear formation cross sections are reported for 26 radionuclides, measured with 40 to 200 MeV proton irradiations of terbium foils. These data are relevant to the production of medically relevant radionuclides (e.g., 152Tb, 155Tb, 155Eu, and 156Eu) and to ongoing efforts to characterize stellar nucleosynthesis routes passing through long-lived intermediaries (e.g., 153Gd). Computational predictions from the ALICE2011, CEM03.03, Bertini, and INCL+ABLA codes are compared with newly measured data to contribute to the ongoing process of code development, and yields are calculated for selected radionuclides using measured data.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Fission Fragments Produced from Proton Irradiation of Thorium Between 40 and 200 MeV
Authors:
Jonathan W. Engle,
Stepan G. Mashnik,
John W. Weidner,
Michael E. Fassbender,
Hong T. Bach,
John L. Ullmann,
Aaron J. Couture,
Leo J. Bitteker,
Mark S. Gulley,
Kevin D. John,
Eva R. Birnbaum,
Francois M. Nortier
Abstract:
The cross sections for the formation of five residual radionuclides (72Se, 97Zr, 112Pd, 125Sb, and 147Nb) from 40- to 200-MeV proton irradiation of thorium have been measured and are reported. The atomic masses of these fragments span the expected mass distribution of radionuclides formed by fission of the target nucleus. Especially in mass regions corresponding to transitions between different re…
▽ More
The cross sections for the formation of five residual radionuclides (72Se, 97Zr, 112Pd, 125Sb, and 147Nb) from 40- to 200-MeV proton irradiation of thorium have been measured and are reported. The atomic masses of these fragments span the expected mass distribution of radionuclides formed by fission of the target nucleus. Especially in mass regions corresponding to transitions between different relaxation mechanisms employed by available models, these data are expected to be useful to the improvement of high-energy transport codes. The predictions of the event generators incorporated into the latest release of the Monte Carlo N-Particle code (MCNP6) are compared with data measured in this work in the hope that these results may be useful to the continued process of code verification and validation in MCNP6.
△ Less
Submitted 18 November, 2013;
originally announced November 2013.
-
Cross sections from proton irradiation of thorium at 800 MeV
Authors:
Jonathan W. Engle,
Stepan G. Mashnik,
John W. Weidner,
Laura E. Wolfsberg,
Michael E. Fassbender,
Kevin Jackman,
Aaron Couture,
Leo J. Bitteker,
John L. Ullmann,
Mark S. Gulley,
Chandra Pillai,
Kevin D. John,
Eva R. Birnbaum,
Francois M. Nortier
Abstract:
Nuclear formation cross sections are reported for 65 nuclides produced from 800-MeV proton irradiation of thorium foils. These data are useful as benchmarks for computational predictions in the ongoing process of theoretical code development and also to the design of spallation-based radioisotope production currently being considered for multiple radiotherapeutic pharmaceutical agents. Measured da…
▽ More
Nuclear formation cross sections are reported for 65 nuclides produced from 800-MeV proton irradiation of thorium foils. These data are useful as benchmarks for computational predictions in the ongoing process of theoretical code development and also to the design of spallation-based radioisotope production currently being considered for multiple radiotherapeutic pharmaceutical agents. Measured data are compared with the predictions of three MCNP6 event generators and used to evaluate the potential for 800-MeV productions of radioisotopes of interest for medical radiotherapy. In only a few instances code predictions are discrepant from measured values by more than a factor of two, demonstrating satisfactory predictive power across a large mass range. Similarly, agreement between measurements presented here and those previously reported is good, lending credibility to predictions of target yields and radioimpurities for high-energy accelerator-produced radionuclides.
△ Less
Submitted 1 July, 2013; v1 submitted 28 May, 2013;
originally announced May 2013.
-
Cross Sections from 800 MeV Proton Irradiation of Terbium
Authors:
J. W. Engle,
S. G. Mashnik,
H. Bach,
A. Couture,
K. Jackman,
R. Gritzo,
B. D. Ballard,
M. Faßbender,
D. M. Smith,
L. J. Bitteker,
J. L. Ullmann,
M. Gulley,
C. Pillai,
K. D. John,
E. R. Birnbaum,
F. M. Nortier
Abstract:
A single terbium foil was irradiated with 800 MeV protons to ascertain the potential for production of lanthanide isotopes of interest in medical, astrophysical, and basic science research and to contribute to nuclear data repositories. Isotopes produced in the foil were quantified by gamma spectroscopy. Cross sections for 36 isotopes produced in the irradiation are reported and compared with pred…
▽ More
A single terbium foil was irradiated with 800 MeV protons to ascertain the potential for production of lanthanide isotopes of interest in medical, astrophysical, and basic science research and to contribute to nuclear data repositories. Isotopes produced in the foil were quantified by gamma spectroscopy. Cross sections for 36 isotopes produced in the irradiation are reported and compared with predictions by the MCNP6 transport code using the CEM03.03, Bertini, and INCL+ABLA event generators. Our results indicate the need to accurately consider fission and fragmentation of relatively light target nuclei like terbium in the modeling of nuclear reactions at 800 MeV. The predictive power of the code was found to be different for each event generator tested but was satisfactory for most of the product yields in the mass region where spallation reactions dominate. However, none of the event generators' results are in complete agreement with measured data.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Proton-induced cross sections relevant to production of 225Ac and 223Ra in natural thorium targets below 200 MeV
Authors:
J. W. Weidner,
S. G. Mashnik,
K. D. John,
F. Hemez,
B. Ballard,
H. Bach,
E. R. Birnbaum,
L. J. Bitteker,
A. Couture,
D. Dry,
M. E. Fassbender,
M. S. Gulley,
K. R. Jackman,
J. L. Ullmann,
L. E. Wolfsberg,
F. M. Nortier
Abstract:
Cross sections for 223,225Ra, 225Ac and 227Th production by the proton bombardment of natural thorium targets were measured at proton energies below 200 MeV. Our measurements are in good agreement with previously published data and offer a complete excitation function for 223,225Ra in the energy range above 90 MeV. Comparison of theoretical predictions with the experimental data shows reasonable-t…
▽ More
Cross sections for 223,225Ra, 225Ac and 227Th production by the proton bombardment of natural thorium targets were measured at proton energies below 200 MeV. Our measurements are in good agreement with previously published data and offer a complete excitation function for 223,225Ra in the energy range above 90 MeV. Comparison of theoretical predictions with the experimental data shows reasonable-to-good agreement. Results indicate that accelerator-based production of 225Ac and 223Ra below 200 MeV is a viable production method.
△ Less
Submitted 15 May, 2012;
originally announced May 2012.
-
225-Ac and 223-Ra Production via 800 MeV Proton Irradiation of Natural Thorium Target
Authors:
J. W. Weidner,
S. G. Mashnik,
K. D. John,
B. Ballard,
E. R. Birnbaum,
L. J. Bitteker,
A. Couture,
M. E. Fassbender,
G. S. Goff,
R. Gritzo,
F. M. Hemez,
W. Runde,
J. L. Ullmann,
L. E. Wolfsberg,
F. M. Nortier
Abstract:
Cross sections for the formation of 225,227-Ac, 223,225-Ra, and 227-Th via the proton bombardment of natural thorium targets were measured at a nominal proton energy of 800 MeV. No earlier experimental cross section data for the production of 223,225-Ra, 227-Ac and 227-Th by this method were found in the literature. A comparison of theoretical predictions with the experimental data shows agreement…
▽ More
Cross sections for the formation of 225,227-Ac, 223,225-Ra, and 227-Th via the proton bombardment of natural thorium targets were measured at a nominal proton energy of 800 MeV. No earlier experimental cross section data for the production of 223,225-Ra, 227-Ac and 227-Th by this method were found in the literature. A comparison of theoretical predictions with the experimental data shows agreement within a factor of two. Results indicate that accelerator-based production of 225-Ac and 223-Ra is a viable production method.
△ Less
Submitted 10 April, 2012;
originally announced April 2012.
