-
Agentless: Demystifying LLM-based Software Engineering Agents
Authors:
Chunqiu Steven Xia,
Yinlin Deng,
Soren Dunn,
Lingming Zhang
Abstract:
Recent advancements in large language models (LLMs) have significantly advanced the automation of software development tasks, including code synthesis, program repair, and test generation. More recently, researchers and industry practitioners have developed various autonomous LLM agents to perform end-to-end software development tasks. These agents are equipped with the ability to use tools, run c…
▽ More
Recent advancements in large language models (LLMs) have significantly advanced the automation of software development tasks, including code synthesis, program repair, and test generation. More recently, researchers and industry practitioners have developed various autonomous LLM agents to perform end-to-end software development tasks. These agents are equipped with the ability to use tools, run commands, observe feedback from the environment, and plan for future actions. However, the complexity of these agent-based approaches, together with the limited abilities of current LLMs, raises the following question: Do we really have to employ complex autonomous software agents? To attempt to answer this question, we build Agentless -- an agentless approach to automatically solve software development problems. Compared to the verbose and complex setup of agent-based approaches, Agentless employs a simplistic two-phase process of localization followed by repair, without letting the LLM decide future actions or operate with complex tools. Our results on the popular SWE-bench Lite benchmark show that surprisingly the simplistic Agentless is able to achieve both the highest performance (27.33%) and lowest cost (\$0.34) compared with all existing open-source software agents! Furthermore, we manually classified the problems in SWE-bench Lite and found problems with exact ground truth patch or insufficient/misleading issue descriptions. As such, we construct SWE-bench Lite-S by excluding such problematic issues to perform more rigorous evaluation and comparison. Our work highlights the current overlooked potential of a simple, interpretable technique in autonomous software development. We hope Agentless will help reset the baseline, starting point, and horizon for autonomous software agents, and inspire future work along this crucial direction.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
MedCalc-Bench: Evaluating Large Language Models for Medical Calculations
Authors:
Nikhil Khandekar,
Qiao Jin,
Guangzhi Xiong,
Soren Dunn,
Serina S Applebaum,
Zain Anwar,
Maame Sarfo-Gyamfi,
Conrad W Safranek,
Abid A Anwar,
Andrew Zhang,
Aidan Gilson,
Maxwell B Singer,
Amisha Dave,
Andrew Taylor,
Aidong Zhang,
Qingyu Chen,
Zhiyong Lu
Abstract:
As opposed to evaluating computation and logic-based reasoning, current benchmarks for evaluating large language models (LLMs) in medicine are primarily focused on question-answering involving domain knowledge and descriptive reasoning. While such qualitative capabilities are vital to medical diagnosis, in real-world scenarios, doctors frequently use clinical calculators that follow quantitative e…
▽ More
As opposed to evaluating computation and logic-based reasoning, current benchmarks for evaluating large language models (LLMs) in medicine are primarily focused on question-answering involving domain knowledge and descriptive reasoning. While such qualitative capabilities are vital to medical diagnosis, in real-world scenarios, doctors frequently use clinical calculators that follow quantitative equations and rule-based reasoning paradigms for evidence-based decision support. To this end, we propose MedCalc-Bench, a first-of-its-kind dataset focused on evaluating the medical calculation capability of LLMs. MedCalc-Bench contains an evaluation set of over 1000 manually reviewed instances from 55 different medical calculation tasks. Each instance in MedCalc-Bench consists of a patient note, a question requesting to compute a specific medical value, a ground truth answer, and a step-by-step explanation showing how the answer is obtained. While our evaluation results show the potential of LLMs in this area, none of them are effective enough for clinical settings. Common issues include extracting the incorrect entities, not using the correct equation or rules for a calculation task, or incorrectly performing the arithmetic for the computation. We hope our study highlights the quantitative knowledge and reasoning gaps in LLMs within medical settings, encouraging future improvements of LLMs for various clinical calculation tasks.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Transverse modulational dynamics of quenched patterns
Authors:
Sierra Dunn,
Ryan Goh,
Benjamin Krewson
Abstract:
We study the modulational dynamics of striped patterns formed in the wake of a planar directional quench. Such quenches, which move across a medium and nucleate pattern-forming instabilities in their wake, have been shown in numerous applications to control and select the wavenumber and orientation of striped phases. In the context of the prototypical complex Ginzburg-Landau and Swift-Hohenberg eq…
▽ More
We study the modulational dynamics of striped patterns formed in the wake of a planar directional quench. Such quenches, which move across a medium and nucleate pattern-forming instabilities in their wake, have been shown in numerous applications to control and select the wavenumber and orientation of striped phases. In the context of the prototypical complex Ginzburg-Landau and Swift-Hohenberg equations, we use a multiple-scale analysis to derive a one-dimensional viscous Burgers' equation which describes the long-wavelength modulational and defect dynamics in the direction transverse to the quenching motion, that is along the quenching line. We show that the wavenumber selecting properties of the quench determines the nonlinear flux parameter in the Burgers' modulation equation, while the viscosity parameter of the Burgers' equation is naturally determined by the transverse diffusivity of the pure stripe state. We use this approximation to accurately characterize the transverse dynamics of several types of defects formed in the wake, including grain boundaries and phase-slips.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
DiscoGen: Learning to Discover Gene Regulatory Networks
Authors:
Nan Rosemary Ke,
Sara-Jane Dunn,
Jorg Bornschein,
Silvia Chiappa,
Melanie Rey,
Jean-Baptiste Lespiau,
Albin Cassirer,
Jane Wang,
Theophane Weber,
David Barrett,
Matthew Botvinick,
Anirudh Goyal,
Mike Mozer,
Danilo Rezende
Abstract:
Accurately inferring Gene Regulatory Networks (GRNs) is a critical and challenging task in biology. GRNs model the activatory and inhibitory interactions between genes and are inherently causal in nature. To accurately identify GRNs, perturbational data is required. However, most GRN discovery methods only operate on observational data. Recent advances in neural network-based causal discovery meth…
▽ More
Accurately inferring Gene Regulatory Networks (GRNs) is a critical and challenging task in biology. GRNs model the activatory and inhibitory interactions between genes and are inherently causal in nature. To accurately identify GRNs, perturbational data is required. However, most GRN discovery methods only operate on observational data. Recent advances in neural network-based causal discovery methods have significantly improved causal discovery, including handling interventional data, improvements in performance and scalability. However, applying state-of-the-art (SOTA) causal discovery methods in biology poses challenges, such as noisy data and a large number of samples. Thus, adapting the causal discovery methods is necessary to handle these challenges. In this paper, we introduce DiscoGen, a neural network-based GRN discovery method that can denoise gene expression measurements and handle interventional data. We demonstrate that our model outperforms SOTA neural network-based causal discovery methods.
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
A Pseudo-Two-Dimensional (P2D) Model for FeS2 Conversion Cathode Batteries
Authors:
Jeffrey S. Horner,
Grace Whang,
Igor V. Kolesnichenko,
Timothy N. Lambert,
Bruce S. Dunn,
Scott A. Roberts
Abstract:
Conversion cathode materials are gaining interest for secondary batteries due to their high theoretical energy and power density. However, practical application as a secondary battery material is currently limited by practical issues such as poor cyclability. To better understand these materials, we have developed a pseudo-two-dimensional model for conversion cathodes. We apply this model to FeS2…
▽ More
Conversion cathode materials are gaining interest for secondary batteries due to their high theoretical energy and power density. However, practical application as a secondary battery material is currently limited by practical issues such as poor cyclability. To better understand these materials, we have developed a pseudo-two-dimensional model for conversion cathodes. We apply this model to FeS2 - a material that undergoes intercalation followed by conversion during discharge. The model is derived from the half-cell Doyle-Fuller-Newman model with additional loss terms added to reflect the converted shell resistance as the reaction progresses. We also account for polydisperse active material particles by incorporating a variable active surface area and effective particle radius. Using the model, we show that the leading loss mechanisms for FeS2 are associated with solid-state diffusion and electrical transport limitations through the converted shell material. The polydisperse simulations are also compared to a monodisperse system, and we show that polydispersity has very little effect on the intercalation behavior yet leads to capacity loss during the conversion reaction. We provide the code as an open-source Python Battery Mathematical Modelling (PyBaMM) model that can be used to identify performance limitations for other conversion cathode materials.
△ Less
Submitted 16 July, 2022; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Cumulant methods for electron-phonon problems. II. The self-consistent cumulant expansion
Authors:
Paul J. Robinson,
Ian S. Dunn,
David R. Reichman
Abstract:
In this work we present a self-consistent cumulant expansion (SC-CE) and investigate its accuracy for the one-dimensional Holstein model with and without phonon dispersion. We show that for finite lattices sizes, the numerical integration of the SC-CE equations becomes unstable at long times. This defect is partially ameliorated when studying systems in the thermodynamic limit, enabling the demons…
▽ More
In this work we present a self-consistent cumulant expansion (SC-CE) and investigate its accuracy for the one-dimensional Holstein model with and without phonon dispersion. We show that for finite lattices sizes, the numerical integration of the SC-CE equations becomes unstable at long times. This defect is partially ameliorated when studying systems in the thermodynamic limit, enabling the demonstration that the SC-CE corrects many deficits of the standard perturbative CE in the (non-dispersive) Holstein model. The natural phonon damping that arises in the more realistic dispersed Holstein model renders the SC-CE stable, allowing for a complete assessment of the method. Here we find that self-consistency dramatically corrects many of the failures found in the perturbative CE, but also introduces some unphysical features. Finally, we comment on the potential use of SC-CE as a tool for calculating Green's functions in generic many-body problems.
△ Less
Submitted 8 June, 2022; v1 submitted 4 March, 2022;
originally announced March 2022.
-
Cumulant methods for electron-phonon problems. I. Perturbative expansions
Authors:
Paul J. Robinson,
Ian S. Dunn,
David R. Reichman
Abstract:
In this work we investigate the ability of the cumulant expansion (CE) to capture one-particle spectral information in electron-phonon coupled systems at both zero and finite temperatures. In particular, we present a comprehensive study of the second- and fourth-order CE for the one-dimensional Holstein model as compared with numerically exact methods. We investigate both finite sized systems as w…
▽ More
In this work we investigate the ability of the cumulant expansion (CE) to capture one-particle spectral information in electron-phonon coupled systems at both zero and finite temperatures. In particular, we present a comprehensive study of the second- and fourth-order CE for the one-dimensional Holstein model as compared with numerically exact methods. We investigate both finite sized systems as well as the approach to the thermodynamic limit, drawing distinctions and connections between the behavior of systems in and away from the thermodynamic limit that enable a greater understanding of the ability of the CE to capture real-frequency information across the full range of wave vectors. We find that for zero electronic momentum, the spectral function is well described by the second-order CE at low and high temperatures. However, for non-zero electronic momenta, the CE is only accurate at high temperature. We analyze the fourth-order cumulant, and find that while it improves the description of the short-time dynamics encoded in the one-particle Green's function, it can introduce divergences in the time domain as well as unphysical negative spectral weight in the spectral function. When well-behaved, the fourth-order CE does provide notable accurate corrections to the second-order CE. Finally, we use our results to comment on the use of the CE as a tool for calculating transport behavior in the realistic ab initio modeling of materials.
△ Less
Submitted 8 June, 2022; v1 submitted 4 March, 2022;
originally announced March 2022.
-
Topological Entropy of Surface Braids and Maximally Efficient Mixing
Authors:
Spencer A. Smith,
Sierra Dunn
Abstract:
The deep connections between braids and dynamics by way of the Nielsen-Thurston classification theorem have led to a wide range of practical applications. Braids have been used to detect coherent structures and mixing regions in oceanic flows, drive the design of industrial mixing machines, contextualize the evolution of taffy pullers, and characterize the chaotic motion of topological defects in…
▽ More
The deep connections between braids and dynamics by way of the Nielsen-Thurston classification theorem have led to a wide range of practical applications. Braids have been used to detect coherent structures and mixing regions in oceanic flows, drive the design of industrial mixing machines, contextualize the evolution of taffy pullers, and characterize the chaotic motion of topological defects in active nematics. Mixing plays a central role in each of these examples, and the braids naturally associated with each system come equipped with a useful measure of mixing efficiency, the topological entropy per operation (TEPO). This motivates the following questions. What is the maximum mixing efficiency for braids, and what braids realize this? The answer depends on how we define braids. For the standard Artin presentation, well-known braids with mixing efficiencies related to the golden and silver ratios have been proven to be maximal. However, it is fruitful to consider surface braids, a natural generalization of braids, with presentations constructed from Artin-like braid generators on embedded graphs. In this work, we introduce an efficient and elegant algorithm for finding the topological entropy and TEPO of surface braids on any pairing of orientable surface and planar embeddable graph. Of the myriad possible graphs and surfaces, graphs that can be embedded in $\mathbb{R}^2$ as a lattice are a simple, highly symmetric choice, and the braids that result more naturally model the motion of points on the plane. We extensively search for a maximum mixing efficiency braid on planar lattice graphs and examine a novel candidate braid, which we conjecture to have this maximal property.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Electrochemical Modeling of GITT Measurements for Improved Solid-State Diffusion Coefficient Evaluation
Authors:
Jeffrey S. Horner,
Grace Whang,
David S. Ashby,
Igor V. Kolesnichenko,
Timothy N. Lambert,
Bruce S. Dunn,
A. Alec Talin,
Scott A. Roberts
Abstract:
Galvanostatic Intermittent Titration Technique (GITT) is widely used to evaluate solid-state diffusion coefficients in electrochemical systems. However, the existing analysis methods for GITT data require numerous assumptions, and the derived diffusion coefficients typically are not independently validated. To investigate the validity of the assumptions and derived diffusion coefficients, we emplo…
▽ More
Galvanostatic Intermittent Titration Technique (GITT) is widely used to evaluate solid-state diffusion coefficients in electrochemical systems. However, the existing analysis methods for GITT data require numerous assumptions, and the derived diffusion coefficients typically are not independently validated. To investigate the validity of the assumptions and derived diffusion coefficients, we employ a direct pulse fitting method for interpreting GITT data that involves numerically fitting an electrochemical pulse and subsequent relaxation to a one-dimensional, single-particle, electrochemical model coupled with non-ideal transport to directly evaluate diffusion coefficients that are independently verified through cycling predictions. Extracted from GITT measurements of the intercalation regime of FeS2 and used to predict the discharge behavior, our non-ideal diffusion coefficients prove to be two orders of magnitude more accurate than ideal diffusion coefficients extracted using conventional methods. We further extend our model to a polydisperse set of particles to show the validity of a single-particle approach when the modeled radius is proportional to the total volume-to-surface-area ratio of the system.
△ Less
Submitted 22 October, 2021; v1 submitted 13 July, 2021;
originally announced July 2021.
-
Thermal energy harvesting using pyroelectric-electrochemical coupling in ferroelectric materials
Authors:
Yan Zhang,
Pham Thi Thuy Phuong,
Eleanor Roake,
Hamideh Khanbareh,
Yaqiong Wang,
Steve Dunn,
Chris Bowen
Abstract:
Recently, the coupling of ferroelectrics with electrochemical reactions has attracted increasing interest for harvesting waste heat. The change of polarisation of a ferroelectric with temperature can be used to influence chemical reactions, especially when the material is cycled near its Curie temperature. In this perspective, we introduce the principle of pyroelectric controlled electrochemical p…
▽ More
Recently, the coupling of ferroelectrics with electrochemical reactions has attracted increasing interest for harvesting waste heat. The change of polarisation of a ferroelectric with temperature can be used to influence chemical reactions, especially when the material is cycled near its Curie temperature. In this perspective, we introduce the principle of pyroelectric controlled electrochemical processes by harvesting waste heat energy and explore their potential electrochemical applications, such as water treatment, air purificiation and hydrogen generation. As an emerging approach for driving electrochemical reactions, the presence of thermal fluctuations and/or transient waste heat in the environment has the potential to be the primary thermal input for driving the change in polarisation of a pyroelectric to release charge for such reactions. There are a number of avenues to explore and we summarize strategies for forming multi-functional or hybrid materials and future directions such as selecting pyroelectrics with low Curie temperature (< 100 °C), improved heat conductivity, enhanced surface area or porosity, tailored microstructures and systems capable of operating over a broader temperature range.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Removing instabilities in the hierarchical equations of motion: exact and approximate projection approaches
Authors:
Ian S. Dunn,
Roel Tempelaar,
David R. Reichman
Abstract:
The hierarchical equations of motion (HEOM) provide a numerically exact approach for computing the reduced dynamics of a quantum system linearly coupled to a bath. We have found that HEOM contains temperature-dependent instabilities that grow exponentially in time. In the case of continuous-bath models, these instabilities may be delayed to later times by increasing the hierarchy dimension; howeve…
▽ More
The hierarchical equations of motion (HEOM) provide a numerically exact approach for computing the reduced dynamics of a quantum system linearly coupled to a bath. We have found that HEOM contains temperature-dependent instabilities that grow exponentially in time. In the case of continuous-bath models, these instabilities may be delayed to later times by increasing the hierarchy dimension; however, for systems coupled to discrete, non-dispersive modes, increasing the hierarchy dimension does little to alleviate the problem. We show that these instabilities can also be removed completely at a potentially much lower cost via projection onto the space of stable eigenmodes; furthermore, we find that for discrete-bath models at zero temperature, the remaining projected dynamics computed with few hierarchy levels are essentially identical to the exact dynamics that otherwise might require an intractably large number of hierarchy levels for convergence. Recognizing that computation of the eigenmodes might be prohibitive, e.g. for large or strongly-coupled models, we present a Prony filtration algorithm that may be useful as an alternative for accomplishing this projection when diagonalization is too costly. We present results demonstrating the efficacy of HEOM projected via diagonalization and Prony filtration. We also discuss issues associated with the nonnormality of HEOM.
△ Less
Submitted 10 May, 2019; v1 submitted 12 February, 2019;
originally announced February 2019.
-
The Infrared Imaging Spectrograph (IRIS) for TMT: Instrument Overview
Authors:
James E. Larkin,
Anna M. Moore,
Shelley A. Wright,
James E. Wincentsen,
David Anderson,
Eric M. Chisholm,
Richard G. Dekany,
Jennifer S. Dunn,
Brent L. Ellerbroek,
Yutaka Hayano,
Andrew C. Phillips,
Luc Simard,
Roger Smith,
Ryuji Suzuki,
Robert W. Weber,
Jason L. Weiss,
Kai Zhang
Abstract:
IRIS is a near-infrared (0.84 to 2.4 microns) integral field spectrograph and wide-field imager being developed for first light with the Thirty Meter (TMT). It mounts to the advanced optics (AO) system NFIRAOS and has integrated on-instrument wavefront sensors (OIWFS) to achieve diffraction-limited spatial resolution at wavelengths longer than 1 micron. With moderate spectral resolution (R ~4,000…
▽ More
IRIS is a near-infrared (0.84 to 2.4 microns) integral field spectrograph and wide-field imager being developed for first light with the Thirty Meter (TMT). It mounts to the advanced optics (AO) system NFIRAOS and has integrated on-instrument wavefront sensors (OIWFS) to achieve diffraction-limited spatial resolution at wavelengths longer than 1 micron. With moderate spectral resolution (R ~4,000 - 8,000) and large bandpass over a continuous field of view, IRIS will open new opportunities in virtually every area of astrophysical science. It will be able to resolve surface features tens of kilometers across Titan, while also mapping the distant galaxies at the scale of an individual star forming region. This paper summarizes the entire design and capabilities, and includes the results from the nearly completed preliminary design phase.
△ Less
Submitted 4 August, 2016;
originally announced August 2016.
-
The InfraRed Imaging Spectrograph (IRIS) for TMT: latest science cases and simulations
Authors:
Shelley A. Wright,
Gregory Walth,
Tuan Do,
Daniel Marshall,
James E. Larkin,
Anna M. Moore,
Mate Adamkovics,
David Andersen,
Lee Armus,
Aaron Barth,
Patrick Cote,
Jeff Cooke,
Eric M. Chisholm,
Timothy Davidge,
Jennifer S. Dunn,
Christophe Dumas,
Brent L. Ellerbroeck,
Andrea M. Ghez,
Lei Hao,
Yutaka Hayano,
Michael Liu,
Enrique Lopez-Rodriguez,
Jessica R. Lu,
Shude Mao,
Christian Marois
, et al. (14 additional authors not shown)
Abstract:
The Thirty Meter Telescope (TMT) first light instrument IRIS (Infrared Imaging Spectrograph) will complete its preliminary design phase in 2016. The IRIS instrument design includes a near-infrared (0.85 - 2.4 micron) integral field spectrograph (IFS) and imager that are able to conduct simultaneous diffraction-limited observations behind the advanced adaptive optics system NFIRAOS. The IRIS scienc…
▽ More
The Thirty Meter Telescope (TMT) first light instrument IRIS (Infrared Imaging Spectrograph) will complete its preliminary design phase in 2016. The IRIS instrument design includes a near-infrared (0.85 - 2.4 micron) integral field spectrograph (IFS) and imager that are able to conduct simultaneous diffraction-limited observations behind the advanced adaptive optics system NFIRAOS. The IRIS science cases have continued to be developed and new science studies have been investigated to aid in technical performance and design requirements. In this development phase, the IRIS science team has paid particular attention to the selection of filters, gratings, sensitivities of the entire system, and science cases that will benefit from the parallel mode of the IFS and imaging camera. We present new science cases for IRIS using the latest end-to-end data simulator on the following topics: Solar System bodies, the Galactic center, active galactic nuclei (AGN), and distant gravitationally-lensed galaxies. We then briefly discuss the necessity of an advanced data management system and data reduction pipeline.
△ Less
Submitted 4 August, 2016;
originally announced August 2016.
-
36 degree step size of proton-driven c-ring rotation in FoF1-ATP synthase
Authors:
Monika G. Dueser,
Nawid Zarrabi,
Daniel J. Cipriano,
Stefan Ernst,
Gary D. Glick,
Stanley D. Dunn,
Michael Boersch
Abstract:
Synthesis of the biological "energy currency molecule" adenosine triphosphate ATP is accomplished by FoF1-ATP synthase. In the plasma membrane of Escherichia coli, proton-driven rotation of a ring of 10 c subunits in the Fo motor powers catalysis in the F1 motor. While F1 uses 120 degree stepping, Fo models predict a step-by-step rotation of c subunits 36 degree at a time, which is here demonstr…
▽ More
Synthesis of the biological "energy currency molecule" adenosine triphosphate ATP is accomplished by FoF1-ATP synthase. In the plasma membrane of Escherichia coli, proton-driven rotation of a ring of 10 c subunits in the Fo motor powers catalysis in the F1 motor. While F1 uses 120 degree stepping, Fo models predict a step-by-step rotation of c subunits 36 degree at a time, which is here demonstrated by single-molecule fluorescence resonance energy transfer.
△ Less
Submitted 1 March, 2009;
originally announced March 2009.
-
Simultaneous monitoring of the two coupled motors of a single FoF1-ATP synthase by three-color FRET using duty cycle-optimized triple-ALEX
Authors:
N. Zarrabi,
S. Ernst,
M. G. Dueser,
A. Golovina-Leiker,
W. Becker,
R. Erdmann,
S. D. Dunn,
M. Borsch
Abstract:
FoF1-ATP synthase is the enzyme that provides the 'chemical energy currency' adenosine triphosphate, ATP, for living cells. The formation of ATP is accomplished by a stepwise internal rotation of subunits within the enzyme. Briefly, proton translocation through the membrane-bound Fo part of ATP synthase drives a 10-step rotary motion of the ring of c subunits with respect to the non-rotating sub…
▽ More
FoF1-ATP synthase is the enzyme that provides the 'chemical energy currency' adenosine triphosphate, ATP, for living cells. The formation of ATP is accomplished by a stepwise internal rotation of subunits within the enzyme. Briefly, proton translocation through the membrane-bound Fo part of ATP synthase drives a 10-step rotary motion of the ring of c subunits with respect to the non-rotating subunits a and b. This rotation is transmitted to the gamma and epsilon subunits of the F1 sector resulting in 120 degree steps. In order to unravel this symmetry mismatch we monitor subunit rotation by a single-molecule fluorescence resonance energy transfer (FRET) approach using three fluorophores specifically attached to the enzyme: one attached to the F1 motor, another one to the Fo motor, and the third one to a non-rotating subunit. To reduce photophysical artifacts due to spectral fluctuations of the single fluorophores, a duty cycle-optimized alternating three-laser scheme (DCO-ALEX) has been developed. Simultaneous observation of the stepsizes for both motors allows the detection of reversible elastic deformations between the rotor parts of Fo and F1.
△ Less
Submitted 8 February, 2009;
originally announced February 2009.
-
Monitoring the rotary motors of single FoF1-ATP synthase by synchronized multi channel TCSPC
Authors:
N. Zarrabi,
M. G. Dueser,
S. Ernst,
R. Reuter,
G. D. Glick,
S. D. Dunn,
J. Wrachtrup,
M. Boersch
Abstract:
Confocal time resolved single-molecule spectroscopy using pulsed laser excitation and synchronized multi channel time correlated single photon counting (TCSPC) provides detailed information about the conformational changes of a biological motor in real time. We studied the formation of adenosine triphosphate, ATP, from ADP and phosphate by FoF1-ATP synthase. The reaction is performed by a stepwi…
▽ More
Confocal time resolved single-molecule spectroscopy using pulsed laser excitation and synchronized multi channel time correlated single photon counting (TCSPC) provides detailed information about the conformational changes of a biological motor in real time. We studied the formation of adenosine triphosphate, ATP, from ADP and phosphate by FoF1-ATP synthase. The reaction is performed by a stepwise internal rotation of subunits of the lipid membrane-embedded enzyme. Using fluorescence resonance energy transfer, FRET, we detected rotation of this biological motor by sequential changes of intramolecular distances within a single FoF1-ATP synthase. Prolonged observation times of single enzymes were achieved by functional immobilization to the glass surface. The stepwise rotary subunit movements were identified by Hidden Markov Models (HMM) which were trained with single-molecule FRET trajectories. To improve the accuracy of the HMM analysis we included the single-molecule fluorescence lifetime of the FRET donor and used alternating laser excitation to co-localize the FRET acceptor independently within a photon burst. The HMM analysis yielded the orientations and dwell times of rotary subunits during stepwise rotation. In addition, the action mode of bactericidal drugs, i.e. inhibitors of FoF1-ATP synthase like aurovertin, could be investigated by the time resolved single-molecule FRET approach.
△ Less
Submitted 29 August, 2007;
originally announced August 2007.
-
Detecting substeps in the rotary motors of FoF1-ATP synthase by Hidden Markov Models
Authors:
N. Zarrabi,
M. G. Dueser,
R. Reuter,
S. D. Dunn,
J. Wrachtrup,
M. Boersch
Abstract:
FoF1-ATP synthase is the enzyme that provides the 'chemical energy currency' adenosine triphosphate, ATP, for living cells. The formation of ATP is accomplished by a stepwise internal rotation of subunits within the enzyme. We monitor subunit rotation by a single-molecule fluorescence resonance energy transfer (FRET) approach using two fluorophores specifically attached to the enzyme. To identif…
▽ More
FoF1-ATP synthase is the enzyme that provides the 'chemical energy currency' adenosine triphosphate, ATP, for living cells. The formation of ATP is accomplished by a stepwise internal rotation of subunits within the enzyme. We monitor subunit rotation by a single-molecule fluorescence resonance energy transfer (FRET) approach using two fluorophores specifically attached to the enzyme. To identify the stepsize of rotary movements by the motors of ATP synthase we simulated the confocal single-molecule FRET data of freely diffusing enzymes and developed a step finder algorithm based on 'Hidden Markov Models' (HMM). The HMM is able to find the proximity factors, P, for a three-level system and for a five-level system, and to unravel the dwell times of the simulated rotary movements. To identify the number of hidden states in the system, a likelihood parameter is calculated for the series of one-state to eight-state HMMs applied to each set of simulated data. Thereby, the basic prerequisites for the experimental single-molecule FRET data are defined that allow for discrimination between a 120 degree stepping mode or a 36 degree substep rotation mode for the proton-driven Fo motor of ATP synthase.
△ Less
Submitted 18 January, 2007;
originally announced January 2007.
