Showing 1–24 of 24 results for author: Ertas, D

Velocity Correlations in Dense Gravity Driven Granular Chute Flow

Authors: Oleh Baran, Deniz Ertas, Gary S. Grest, Thomas C. Halsey, Jeremy B. Lechman

Abstract: We report numerical results for velocity correlations in dense, gravity-driven granular flow down an inclined plane. For the grains on the surface layer, our results are consistent with experimental measurements reported by Pouliquen. We show that the correlation structure within planes parallel to the surface persists in the bulk. The two-point velocity correlation function exhibits exponential… ▽ More We report numerical results for velocity correlations in dense, gravity-driven granular flow down an inclined plane. For the grains on the surface layer, our results are consistent with experimental measurements reported by Pouliquen. We show that the correlation structure within planes parallel to the surface persists in the bulk. The two-point velocity correlation function exhibits exponential decay for small to intermediate values of the separation between spheres. The correlation lengths identified by exponential fits to the data show nontrivial dependence on the averaging time $\dt$ used to determine grain velocities. We discuss the correlation length dependence on averaging time, incline angle, pile height, depth of the layer, system size and grain stiffness, and relate the results to other length scales associated with the rheology of the system. We find that correlation lengths are typically quite small, of the order of a particle diameter, and increase approximately logarithmically with a minimum pile height for which flow is possible, $\hstop$, contrary to the theoretical expectation of a proportional relationship between the two length scales. △ Less

Submitted 29 August, 2006; originally announced August 2006.

Comments: 21 pages, 16 figures

Journal ref: Phys. Rev. E 74, 051302 (2006)

Coherent Structures in Dense Granular Flows

Authors: Thomas C. Halsey, Deniz Ertas

Abstract: We present a theoretical derivation of a rheology for dense granular flow, based on the process of inelastic collapse of neighboring particles. This collapse creates regions of correlated motion, which control the viscous behavior of the flow on a large scale. The result is a rheology that obeys the scaling form observed experimentally by Pouliquen and by the "G.D.R. Midi" group author. We ident… ▽ More We present a theoretical derivation of a rheology for dense granular flow, based on the process of inelastic collapse of neighboring particles. This collapse creates regions of correlated motion, which control the viscous behavior of the flow on a large scale. The result is a rheology that obeys the scaling form observed experimentally by Pouliquen and by the "G.D.R. Midi" group author. We identify the nature of the constraints imposed by inelastic collapse on the grain-scale motions in the flow; finally, we show using an energy cascade argument that the inelastic collapse need not proceed to the final endpoint in order for the correlations we have identified to build up. △ Less

Submitted 7 June, 2005; originally announced June 2005.

Comments: 4 pages, 1 figure, RevTeX 4

Reaction-limited sintering in nearly saturated environments

Authors: Benny Davidovitch, Deniz Ertas, Thomas C. Halsey

Abstract: We study the shape and growth rate of necks between sintered spheres with dissolution-precipitation dynamics in the reaction-limited regime. We determine the critical shape that separates those initial neck shapes that can sinter from those that necessarily dissolve, as well as the asymptotic evolving shape of sinters far from the critical shape. We compare our results with past results for the… ▽ More We study the shape and growth rate of necks between sintered spheres with dissolution-precipitation dynamics in the reaction-limited regime. We determine the critical shape that separates those initial neck shapes that can sinter from those that necessarily dissolve, as well as the asymptotic evolving shape of sinters far from the critical shape. We compare our results with past results for the asymptotic neck shape in closely related but more complicated models of surface dynamics; in particular we confirm a scaling conjecture, originally due to Kuczinsky. Finally, we consider the relevance of this problem to the diagenesis of sedimentary rocks and other applications. △ Less

Submitted 7 August, 2003; originally announced August 2003.

Ripening of Porous Media

Authors: Benny Davidovitch, Deniz Ertas, Thomas C. Halsey

Abstract: We address the surface tension-driven dynamics of porous media in nearly saturated pore-space solutions. We linearize this dynamics in the reaction-limited regime near its fixed points -- surfaces of constant mean curvature (CMC surfaces). We prove that the only stable interface for this dynamics is the plane, and estimate the time scale for a CMC surface to become unstable. We also discuss the… ▽ More We address the surface tension-driven dynamics of porous media in nearly saturated pore-space solutions. We linearize this dynamics in the reaction-limited regime near its fixed points -- surfaces of constant mean curvature (CMC surfaces). We prove that the only stable interface for this dynamics is the plane, and estimate the time scale for a CMC surface to become unstable. We also discuss the differences between open and closed system dynamics, pointing out the unlikelihood that CMC surfaces are ever realized in these systems on any time scale. △ Less

Submitted 22 October, 2002; originally announced October 2002.

Granular gravitational collapse and chute flow

Authors: Deniz Ertas, Thomas C. Halsey

Abstract: Inelastic grains in a flow under gravitation tend to collapse into states in which the relative normal velocities of two neighboring grains is zero. If the time scale for this gravitational collapse is shorter than inverse strain rates in the flow, we propose that this collapse will lead to the formation of ``granular eddies", large scale condensed structures of particles moving coherently with… ▽ More Inelastic grains in a flow under gravitation tend to collapse into states in which the relative normal velocities of two neighboring grains is zero. If the time scale for this gravitational collapse is shorter than inverse strain rates in the flow, we propose that this collapse will lead to the formation of ``granular eddies", large scale condensed structures of particles moving coherently with one another. The scale of these eddies is determined by the gradient of the strain rate. Applying these concepts to chute flow of granular media, (gravitationally driven flow down inclined planes) we predict the existence of a bulk flow region whose rheology is determined only by flow density. This theory yields the experimental ``Pouliquen flow rule", correlating different chute flows; it also correctly accounts for the different flow regimes observed. △ Less

Submitted 4 June, 2002; originally announced June 2002.

Comments: LaTeX2e with epl class, 7 pages, 2 figures, submitted to Europhysics Letters

Stability of Monomer-Dimer Piles

Authors: Deniz Ertas, Thomas C. Halsey, Alex J. Levine, Thomas G. Mason

Abstract: We measure how strong, localized contact adhesion between grains affects the maximum static critical angle, theta_c, of a dry sand pile. By mixing dimer grains, each consisting of two spheres that have been rigidly bonded together, with simple spherical monomer grains, we create sandpiles that contain strong localized adhesion between a given particle and at most one of its neighbors. We find th… ▽ More We measure how strong, localized contact adhesion between grains affects the maximum static critical angle, theta_c, of a dry sand pile. By mixing dimer grains, each consisting of two spheres that have been rigidly bonded together, with simple spherical monomer grains, we create sandpiles that contain strong localized adhesion between a given particle and at most one of its neighbors. We find that tan(theta_c) increases from 0.45 to 1.1 and the grain packing fraction, Phi, decreases from 0.58 to 0.52 as we increase the relative number fraction of dimer particles in the pile, nu_d, from 0 to 1. We attribute the increase in tan(theta_c(nu_d)) to the enhanced stability of dimers on the surface, which reduces the density of monomers that need to be accomodated in the most stable surface traps. A full characterization and geometrical stability analysis of surface traps provides a good quantitative agreement between experiment and theory over a wide range of nu_d, without any fitting parameters. △ Less

Submitted 16 November, 2001; originally announced November 2001.

Comments: 11 pages, 12 figures consisting of 21 eps files, submitted to PRE

Geometry of Frictionless and Frictional Sphere Packings

Authors: Leonardo E. Silbert, Deniz Ertas, Gary S. Grest, Thomas C. Halsey, Dov Levine

Abstract: We study static packings of frictionless and frictional spheres in three dimensions, obtained via molecular dynamics simulations, in which we vary particle hardness, friction coefficient, and coefficient of restitution. Although frictionless packings of hard-spheres are always isostatic (with six contacts) regardless of construction history and restitution coefficient, frictional packings achiev… ▽ More We study static packings of frictionless and frictional spheres in three dimensions, obtained via molecular dynamics simulations, in which we vary particle hardness, friction coefficient, and coefficient of restitution. Although frictionless packings of hard-spheres are always isostatic (with six contacts) regardless of construction history and restitution coefficient, frictional packings achieve a multitude of hyperstatic packings that depend on system parameters and construction history. Instead of immediately dropping to four, the coordination number reduces smoothly from $z=6$ as the friction coefficient $μ$ between two particles is increased. △ Less

Submitted 8 November, 2001; originally announced November 2001.

Comments: 6 pages, 9 figures, submitted to Phys. Rev. E

Granular 'glass' transition

Authors: L. E. Silbert, D. Ertas, G. S. Grest, T. C. Halsey, D. Levine

Abstract: The transition from a flowing to a static state in a granular material is studied using large-scale, 3D particle simulations. Similar to glasses, this transition is manifested in the development of a plateau in the contact normal force distribution P(f) at small forces, along with the splitting of the second peak in the pair correlation function g(r), suggesting compaction and local ordering. Th… ▽ More The transition from a flowing to a static state in a granular material is studied using large-scale, 3D particle simulations. Similar to glasses, this transition is manifested in the development of a plateau in the contact normal force distribution P(f) at small forces, along with the splitting of the second peak in the pair correlation function g(r), suggesting compaction and local ordering. The mechanical state changes from one dominated by plastic intergrain contacts in the flowing state to one dominated by elastic contacts in the static state. We define a staticity index that determines how close the system is to an isostatic state, and show that for our systems, the static state is not isostatic. △ Less

Submitted 6 September, 2001; originally announced September 2001.

Comments: 4 pages with 5 figures

Granular flow down an inclined plane: Bagnold scaling and rheology

Authors: L. E. Silbert, D. Ertas, G. S. Grest, T. C. Halsey, D. Levine, S. J. Plimpton

Abstract: We have performed a systematic, large-scale simulation study of granular media in two- and three-dimensions, investigating the rheology of cohesionless granular particles in inclined plane geometries, i.e., chute flows. We find that over a wide range of parameter space of interaction coefficients and inclination angles, a steady state flow regime exists in which the energy input from gravity bal… ▽ More We have performed a systematic, large-scale simulation study of granular media in two- and three-dimensions, investigating the rheology of cohesionless granular particles in inclined plane geometries, i.e., chute flows. We find that over a wide range of parameter space of interaction coefficients and inclination angles, a steady state flow regime exists in which the energy input from gravity balances that dissipated from friction and inelastic collisions. In this regime, the bulk packing fraction (away from the top free surface and the bottom plate boundary) remains constant as a function of depth z, of the pile. The velocity profile in the direction of flow v(z) scales with height of the pile H, according to v(z) proportional to H^a, with a=1.52. However, the behavior of the normal stresses indicates that existing simple theories of granular flow do not capture all of the features evidenced in the simulations. △ Less

Submitted 3 May, 2001; originally announced May 2001.

Comments: 17 pages, 20 figures, submitted to Phys. Rev. E

Gravity-driven Dense Granular Flows

Authors: Deniz Ertas, Gary S. Grest, Thomas C. Halsey, Dov Levine, Leonardo E. Silbert

Abstract: We report and analyze the results of numerical studies of dense granular flows in two and three dimensions, using both linear damped springs and Hertzian force laws between particles. Chute flow generically produces a constant density profile that satisfies scaling relations suggestive of a Bagnold grain inertia regime. The type of force law has little impact on the behavior of the system. Bulk… ▽ More We report and analyze the results of numerical studies of dense granular flows in two and three dimensions, using both linear damped springs and Hertzian force laws between particles. Chute flow generically produces a constant density profile that satisfies scaling relations suggestive of a Bagnold grain inertia regime. The type of force law has little impact on the behavior of the system. Bulk and surface flows differ in their failure criteria and flow rheology, as evidenced by the change in principal stress directions near the surface. Surface-only flows are not observed in this geometry. △ Less

Submitted 2 May, 2000; originally announced May 2000.

Comments: 4 pages, RevTeX 3.0, 4 PostScript figures (5 files) embedded with epsf

A Ball in a Groove

Authors: Thomas C. Halsey, Deniz Ertas

Abstract: We study the static equilibrium of an elastic sphere held in a rigid groove by gravity and frictional contacts, as determined by contact mechanics. As a function of the opening angle of the groove and the tilt of the groove with respect to the vertical, we identify two regimes of static equilibrium for the ball. In the first of these, at large opening angle or low tilt, the ball rolls at both co… ▽ More We study the static equilibrium of an elastic sphere held in a rigid groove by gravity and frictional contacts, as determined by contact mechanics. As a function of the opening angle of the groove and the tilt of the groove with respect to the vertical, we identify two regimes of static equilibrium for the ball. In the first of these, at large opening angle or low tilt, the ball rolls at both contacts as it is loaded. This is an analog of the "elastic" regime in the mechanics of granular media. At smaller opening angles or larger tilts, the ball rolls at one contact and slides at the other as it is loaded, analogously with the "plastic" regime in the mechanics of granular media. In the elastic regime, the stress indeterminacy is resolved by the underlying kinetics of the ball response to loading. △ Less

Submitted 28 July, 1999; originally announced July 1999.

Comments: RevTeX 3.0, 4 pages, 2 eps figures included with epsf

Impurity mediated nucleation in hexadecane-in-water emulsions

Authors: Amy Herhold, Deniz Ertas, Alex J. Levine, H. E. King Jr

Abstract: We report detailed nucleation studies on the liquid-to-solid transition of hexadecane using nearly monodisperse hexadecane-in-water emulsions. A careful consideration of the kinetics of isothermal and nonisothermal freezing show deviations from predictions of classical nucleation theory, if one assumes that the emulsion droplet population is homogeneous. Similar deviations have been observed pre… ▽ More We report detailed nucleation studies on the liquid-to-solid transition of hexadecane using nearly monodisperse hexadecane-in-water emulsions. A careful consideration of the kinetics of isothermal and nonisothermal freezing show deviations from predictions of classical nucleation theory, if one assumes that the emulsion droplet population is homogeneous. Similar deviations have been observed previously. As an explanation, we propose a novel argument based on the dynamic generation of droplet heterogeneity mediated by mobile impurities. This proposal is in excellent agreement with existing data. △ Less

Submitted 6 November, 1998; originally announced November 1998.

Comments: RevTeX 3.0, 11 pages with 7 embedded eps figures, \documentstyle[aps,twocolumn,floats,epsf]{revtex}. Submitted to Phys. Rev. E

Finite Temperature Depinning of a Flux Line from a Nonuniform Columnar Defect

Authors: Deniz Ertas

Abstract: A flux line in a Type-II superconductor with a single nonuniform columnar defect is studied by a perturbative diagrammatic expansion around an annealed approximation. The system undergoes a finite temperature depinning transition for the (rather unphysical) on-the-average repulsive columnar defect, provided that the fluctuations along the axis are sufficiently large to cause some portions of the… ▽ More A flux line in a Type-II superconductor with a single nonuniform columnar defect is studied by a perturbative diagrammatic expansion around an annealed approximation. The system undergoes a finite temperature depinning transition for the (rather unphysical) on-the-average repulsive columnar defect, provided that the fluctuations along the axis are sufficiently large to cause some portions of the column to become attractive. The perturbative expansion is convergent throughout the weak pinning regime and becomes exact as the depinning transition is approached, providing an exact determination of the depinning temperature and the divergence of the localization length. △ Less

Submitted 8 September, 1998; originally announced September 1998.

Comments: RevTeX, 4 pages, 3 EPS figures embedded with epsf.sty

Gutenberg Richter and Characteristic Earthquake Behavior in Simple Mean-Field Models of Heterogeneous Faults

Authors: Karin Dahmen, Deniz Ertas, Yehuda Ben-Zion

Abstract: The statistics of earthquakes in a heterogeneous fault zone is studied analytically and numerically in the mean field version of a model for a segmented fault system in a three-dimensional elastic solid. The studies focus on the interplay between the roles of disorder, dynamical effects, and driving mechanisms. A two-parameter phase diagram is found, spanned by the amplitude of dynamical weakeni… ▽ More The statistics of earthquakes in a heterogeneous fault zone is studied analytically and numerically in the mean field version of a model for a segmented fault system in a three-dimensional elastic solid. The studies focus on the interplay between the roles of disorder, dynamical effects, and driving mechanisms. A two-parameter phase diagram is found, spanned by the amplitude of dynamical weakening (or ``overshoot'') effects (epsilon) and the normal distance (L) of the driving forces from the fault. In general, small epsilon and small L are found to produce Gutenberg-Richter type power law statistics with an exponential cutoff, while large epsilon and large L lead to a distribution of small events combined with characteristic system-size events. In a certain parameter regime the behavior is bistable, with transitions back and forth from one phase to the other on time scales determined by the fault size and other model parameters. The implications for realistic earthquake statistics are discussed. △ Less

Submitted 4 March, 1998; originally announced March 1998.

Comments: 21 pages, RevTex, 6 figures (ps, eps)

Lateral Separation of Macromolecules and Polyelectrolytes in Microlithographic Arrays

Authors: Deniz Ertas

Abstract: A new approach to separation of a variety of microscopic and mesoscopic objects in dilute solution is presented. The approach takes advantage of unique properties of a specially designed separation device (sieve), which can be readily built using already developed microlithographic techniques. Due to the broken reflection symmetry in its design, the direction of motion of an object in the sieve… ▽ More A new approach to separation of a variety of microscopic and mesoscopic objects in dilute solution is presented. The approach takes advantage of unique properties of a specially designed separation device (sieve), which can be readily built using already developed microlithographic techniques. Due to the broken reflection symmetry in its design, the direction of motion of an object in the sieve varies as a function of its self-diffusion constant, causing separation transverse to its direction of motion. This gives the device some significant and unique advantages over existing fractionation methods based on centrifugation and electrophoresis. △ Less

Submitted 18 June, 1997; originally announced June 1997.

Comments: 4 pages with 3 eps figures, needs RevTeX 3.0 and epsf, also available in postscript form http://cmtw.harvard.edu/~deniz/

Report number: HARV-CMT-DE-9701

Journal ref: Phys. Rev. Lett. 80, 1548 (1998).

Quasi-static crack propagation in heterogeneous media

Authors: Sharad Ramanathan, Deniz Ertaş, Daniel S. Fisher

Abstract: The dynamics of a single crack moving through a heterogeneous medium is studied in the quasi-static approximation. Equations of motion for the crack front are formulated and the resulting scaling behaviour analyzed. In a model scalar system and for mode III (tearing) cracks, the crack surface is found to be self affine with a roughness exponent of $ζ=1/2$. But in the usual experimental case of m… ▽ More The dynamics of a single crack moving through a heterogeneous medium is studied in the quasi-static approximation. Equations of motion for the crack front are formulated and the resulting scaling behaviour analyzed. In a model scalar system and for mode III (tearing) cracks, the crack surface is found to be self affine with a roughness exponent of $ζ=1/2$. But in the usual experimental case of mode I (tensile) cracks, local mode preference causes the crack surface to be only logarithmically rough, quite unlike those seen in experiments. The effects of residual stresses are considered and found, potentially, to lead to increased crack surface roughness. But it appears likely that elastic wave propagation effects may be needed to explain the very rough crack surfaces observed experimentally. △ Less

Submitted 25 November, 1996; originally announced November 1996.

Comments: 4 pages, 1 fig (eps file)

Statistics of Largest Loops in a Random Walk

Authors: Deniz Ertas, Yacov Kantor

Abstract: We report further findings on the size distribution of the largest neutral segments in a sequence of N randomly charged monomers [D. Ertas and Y. Kantor, Phys. Rev. E53, 846 (1996); cond-mat/9507005]. Upon mapping to one--dimensional random walks (RWs), this corresponds to finding the probability distribution for the size L of the largest segment that returns to its starting position in an N--st… ▽ More We report further findings on the size distribution of the largest neutral segments in a sequence of N randomly charged monomers [D. Ertas and Y. Kantor, Phys. Rev. E53, 846 (1996); cond-mat/9507005]. Upon mapping to one--dimensional random walks (RWs), this corresponds to finding the probability distribution for the size L of the largest segment that returns to its starting position in an N--step RW. We primarily focus on the large N, \ell = L/N << 1 limit, which exhibits an essential singularity. We establish analytical upper and lower bounds on the probability distribution, and numerically probe the distribution down to \ell \approx 0.04 (corresponding to probabilities as low as 10^{-15}) using a recursive Monte Carlo algorithm. We also investigate the possibility of singularities at \ell=1/k for integer k. △ Less

Submitted 9 September, 1996; originally announced September 1996.

Comments: 5 pages and 4 eps figures, requires RevTeX, epsf and multicol. Postscript file also available at http://cmtw.harvard.edu/~deniz/publications.html

Journal ref: Phys. Rev. E55, 261-265 (1997)

Irreversibility, Mechanical Entanglement and Thermal Melting in Superconducting Vortex Crystals with Point Impurities

Authors: Deniz Ertas, David R. Nelson

Abstract: We discuss the onset of irreversibility and entanglement of vortex lines in high Tc superconductors due to point disorder and thermal fluctuations using a simplified cage model. A combination of Flory arguments, known results from directed polymers in random media, and a Lindemann criterion are used to estimate the field and temperature dependence of irreversibility, mechanical entanglement and… ▽ More We discuss the onset of irreversibility and entanglement of vortex lines in high Tc superconductors due to point disorder and thermal fluctuations using a simplified cage model. A combination of Flory arguments, known results from directed polymers in random media, and a Lindemann criterion are used to estimate the field and temperature dependence of irreversibility, mechanical entanglement and thermal melting. The qualitative features of this dependence, including its nonmonotonicity when disorder is sufficiently strong, are in good agreement with recent experiments. △ Less

Submitted 19 July, 1996; originally announced July 1996.

Comments: 7 pages, uses RevTeX, multicol.sty and epsf.sty, 5 EPS figures included

Report number: HARV-CMT-NE-9601

Anisotropic Scaling in Threshold Critical Dynamics of Driven Directed Lines

Authors: Deniz Ertas, Mehran Kardar

Abstract: The dynamical critical behavior of a single directed line driven in a random medium near the depinning threshold is studied both analytically (by renormalization group) and numerically, in the context of a Flux Line in a Type-II superconductor with a bulk current $\vec J$. In the absence of transverse fluctuations, the system reduces to recently studied models of interface depinning. In most cas… ▽ More The dynamical critical behavior of a single directed line driven in a random medium near the depinning threshold is studied both analytically (by renormalization group) and numerically, in the context of a Flux Line in a Type-II superconductor with a bulk current $\vec J$. In the absence of transverse fluctuations, the system reduces to recently studied models of interface depinning. In most cases, the presence of transverse fluctuations are found not to influence the critical exponents that describe longitudinal correlations. For a manifold with $d=4-ε$ internal dimensions, longitudinal fluctuations in an isotropic medium are described by a roughness exponent $ζ_\parallel=ε/3$ to all orders in $ε$, and a dynamical exponent $z_\parallel=2-2ε/9+O(ε^2)$. Transverse fluctuations have a distinct and smaller roughness exponent $ζ_\perp=ζ_\parallel-d/2$ for an isotropic medium. Furthermore, their relaxation is much slower, characterized by a dynamical exponent $z_\perp=z_\parallel+1/ν$, where $ν=1/(2-ζ_\parallel)$ is the correlation length exponent. The predicted exponents agree well with numerical results for a flux line in three dimensions. As in the case of interface depinning models, anisotropy leads to additional universality classes. A nonzero Hall angle, which has no analogue in the interface models, also affects the critical behavior. △ Less

Submitted 1 November, 1995; originally announced November 1995.

Comments: 26 pages, 8 Postscript figures packed together with RevTeX 3.0 manuscript using uufiles, uses multicol.sty and epsf.sty, e-mail [email protected] in case of problems

Report number: MIT-CMT-EK-95-1

Randomly Charged Polymers, Random Walks, and Their Extremal Properties

Authors: Deniz Ertas, Yacov Kantor

Abstract: Motivated by an investigation of ground state properties of randomly charged polymers, we discuss the size distribution of the largest Q-segments (segments with total charge Q) in such N-mers. Upon mapping the charge sequence to one--dimensional random walks (RWs), this corresponds to finding the probability for the largest segment with total displacement Q in an N-step RW to have length L. Usin… ▽ More Motivated by an investigation of ground state properties of randomly charged polymers, we discuss the size distribution of the largest Q-segments (segments with total charge Q) in such N-mers. Upon mapping the charge sequence to one--dimensional random walks (RWs), this corresponds to finding the probability for the largest segment with total displacement Q in an N-step RW to have length L. Using analytical, exact enumeration, and Monte Carlo methods, we reveal the complex structure of the probability distribution in the large N limit. In particular, the size of the longest neutral segment has a distribution with a square-root singularity at l=L/N=1, an essential singularity at l=0, and a discontinuous derivative at l=1/2. The behavior near l=1 is related to a another interesting RW problem which we call the "staircase problem". We also discuss the generalized problem for d-dimensional RWs. △ Less

Submitted 4 July, 1995; originally announced July 1995.

Comments: 33 pages, 19 Postscript figures, RevTeX

Journal ref: Phys. Rev. E53, 846-860 (1996)

Extremal Segments in Random Sequences

Authors: Yacov Kantor, Deniz Ertas

Abstract: We investigate the probability for the largest segment in with total displacement $Q$ in an $N$-step random walk to have length $L$. Using analytical, exact enumeration, and Monte Carlo methods, we reveal the complex structure of the probability distribution in the large $N$ limit. In particular, the size of the longest loop has a distribution with a square-root singularity at… ▽ More We investigate the probability for the largest segment in with total displacement $Q$ in an $N$-step random walk to have length $L$. Using analytical, exact enumeration, and Monte Carlo methods, we reveal the complex structure of the probability distribution in the large $N$ limit. In particular, the size of the longest loop has a distribution with a square-root singularity at $\ell\equiv L/N=1$, an essential singularity at $\ell=0$, and a discontinuous derivative at $\ell=1/2$. △ Less

Submitted 30 August, 1994; v1 submitted 29 August, 1994; originally announced August 1994.

Comments: 3 pages, REVTEX 3.0, with multicol.sty, epsf.sty and EPS figures appended via uufiles. (Email in case of trouble.) CHANGES: Missing figure added to figures.uu MIT-CMT-KE-94-1

Journal ref: J. Phys. A27 (Letter to Editor), L907-L911 (1994)

Nonequilibrium Dynamics of Fluctuating Lines

Authors: Mehran Kardar, Deniz Ertas

Abstract: These notes are for the proceedings of the NATO Advanced Study Insitutue on "Scale Invariance, Interfaces, and Non--Equilibrium Dynamics", held at the Isaac Newton Institute, 20--30 June 1994. The four lectures address a number of issues related to dynamic fluctuations of lines in non-equilibrium circumstances. The first two are devoted to the critical behavior of contact lines and flux lines de… ▽ More These notes are for the proceedings of the NATO Advanced Study Insitutue on "Scale Invariance, Interfaces, and Non--Equilibrium Dynamics", held at the Isaac Newton Institute, 20--30 June 1994. The four lectures address a number of issues related to dynamic fluctuations of lines in non-equilibrium circumstances. The first two are devoted to the critical behavior of contact lines and flux lines depinning from impurities. It is emphasized that anisotropies in the medium lead to different universality classes. The importance of nonlinearities for moving lines are discussed in the context of flux lines and polymers in the last two lectures. A dynamic form birefringence is predicted for drifting polymers. △ Less

Submitted 19 August, 1994; originally announced August 1994.

Comments: 24 pages, Plain TeX, figures included via epsf.sty and packed with uufiles, MIT-CMT-EK-94-3

Anisotropic Scaling in Depinning of a Flux Line

Authors: Deniz Ertas, Mehran Kardar

Abstract: We study the depinning of a flux line by analytical and numerical methods applied to a phenomenological equation of motion. Transverse fluctuations do not influence the critical behavior of the longitudinal component, justifying ``planar approximations". In an isotropic medium, longitudinal fluctuations have a roughness exponent $ζ_\parallel=1$, and relax with a dynamic exponent… ▽ More We study the depinning of a flux line by analytical and numerical methods applied to a phenomenological equation of motion. Transverse fluctuations do not influence the critical behavior of the longitudinal component, justifying ``planar approximations". In an isotropic medium, longitudinal fluctuations have a roughness exponent $ζ_\parallel=1$, and relax with a dynamic exponent $z_\parallel\approx4/3$; transverse fluctuations are suppressed ($ζ_\perp=1/2<ζ_\parallel$), and relax more slowly, with $z_\perp=z_\parallel+1$. Anisotropy in the depinning threshold, or orientational dependence of force-force correlations, lead to new universality classes. △ Less

Submitted 2 June, 1994; originally announced June 1994.

Comments: REVTEX 3.0, 12 pages + 2 postscript figures appended using uufiles, MIT-CMT-EK-94-2

Critical Dynamics of Contact Line Depinning

Authors: Deniz Ertas, Mehran Kardar

Abstract: The depinning of a contact line is studied as a dynamical critical phenomenon by a functional renormalization group technique. In $D=2-ε$ interface dimensions, the roughness exponent is $ζ=ε/3$ to all orders in perturbation theory. Thus, $ζ=1/3$ for the contact line, equal to the Imry-Ma estimate of Huse for the equilibrium roughness. The dynamical exponent is $z=1-2ε/9+O(ε^2)<1$, resulting in u… ▽ More The depinning of a contact line is studied as a dynamical critical phenomenon by a functional renormalization group technique. In $D=2-ε$ interface dimensions, the roughness exponent is $ζ=ε/3$ to all orders in perturbation theory. Thus, $ζ=1/3$ for the contact line, equal to the Imry-Ma estimate of Huse for the equilibrium roughness. The dynamical exponent is $z=1-2ε/9+O(ε^2)<1$, resulting in unusual dynamical properties. In particular, a characteristic distortion length of the contact line depinning from a strong defect is predicted to initially increase faster than linearly in time. Some experiments are suggested to probe such dynamics. △ Less

Submitted 12 January, 1994; originally announced January 1994.

Comments: REVTEX 3.0, 4 pages including 2 figures through epsf.tex

Report number: MIT-CMT-EK-94-1