-
Smooth real-time motion planning based on a cascade dual-quaternion screw-geometry MPC
Authors:
Ainoor Teimoorzadeh,
Frederico Fernandes Afonso Silva,
Luis F. C. Figueredo,
Sami Haddadin
Abstract:
This paper investigates the tracking problem of a smooth coordinate-invariant trajectory using dual quaternion algebra. The proposed architecture consists of a cascade structure in which the outer-loop MPC performs real-time smoothing of the manipulator's end-effector twist while an inner-loop kinematic controller ensures tracking of the instantaneous desired end-effector pose. Experiments on a…
▽ More
This paper investigates the tracking problem of a smooth coordinate-invariant trajectory using dual quaternion algebra. The proposed architecture consists of a cascade structure in which the outer-loop MPC performs real-time smoothing of the manipulator's end-effector twist while an inner-loop kinematic controller ensures tracking of the instantaneous desired end-effector pose. Experiments on a $7$-DoF Franka Emika Panda robotic manipulator validate the proposed method demonstrating its application to constraint the robot twists, accelerations and jerks within prescribed bounds.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
A Solution to Slosh-free Robot Trajectory Optimization
Authors:
Rafael I. Cabral Muchacho,
Riddhiman Laha,
Luis F. C. Figueredo,
Sami Haddadin
Abstract:
This paper is about fast slosh free fluid transportation. Existing approaches are either computationally heavy or only suitable for specific robots and container shapes. We model the end effector as a point mass suspended by a spherical pendulum and study the requirements for slosh free motion and the validity of the point mass model. In this approach, slosh free trajectories are generated by cont…
▽ More
This paper is about fast slosh free fluid transportation. Existing approaches are either computationally heavy or only suitable for specific robots and container shapes. We model the end effector as a point mass suspended by a spherical pendulum and study the requirements for slosh free motion and the validity of the point mass model. In this approach, slosh free trajectories are generated by controlling the pendulum's pivot and simulating the motion of the point mass. We cast the trajectory optimization problem as a quadratic program; this strategy can be used to obtain valid control inputs. Through simulations and experiments on a 7 DoF Franka Emika Panda robot we validate the effectiveness of the proposed approach.
△ Less
Submitted 23 October, 2022;
originally announced October 2022.
-
Coordinate Invariant User-Guided Constrained Path Planning with Reactive Rapidly Expanding Plane-Oriented Escaping Trees
Authors:
Riddhiman Laha,
Ruiai Sun,
Wenxi Wu,
Dasharadhan Mahalingam,
Nilanjan Chakraborty,
Luis F. C. Figueredo,
Sami Haddadin
Abstract:
As collaborative robots move closer to human environments, motion generation and reactive planning strategies that allow for elaborate task execution with minimal easy-to-implement guidance whilst coping with changes in the environment is of paramount importance. In this paper, we present a novel approach for generating real-time motion plans for point-to-point tasks using a single successful huma…
▽ More
As collaborative robots move closer to human environments, motion generation and reactive planning strategies that allow for elaborate task execution with minimal easy-to-implement guidance whilst coping with changes in the environment is of paramount importance. In this paper, we present a novel approach for generating real-time motion plans for point-to-point tasks using a single successful human demonstration. Our approach is based on screw linear interpolation,which allows us to respect the underlying geometric constraints that characterize the task and are implicitly present in the demonstration. We also integrate an original reactive collision avoidance approach with our planner. We present extensive experimental results to demonstrate that with our approach,by using a single demonstration of moving one block, we can generate motion plans for complex tasks like stacking multiple blocks (in a dynamic environment). Analogous generalization abilities are also shown for tasks like pouring and loading shelves. For the pouring task, we also show that a demonstration given for one-armed pouring can be used for planning pouring with a dual-armed manipulator of different kinematic structure.
△ Less
Submitted 20 March, 2022;
originally announced March 2022.
-
A New Similarity Space Tailored for Supervised Deep Metric Learning
Authors:
Pedro H. Barros,
Fabiane Queiroz,
Flavio Figueredo,
Jefersson A. dos Santos,
Heitor S. Ramos
Abstract:
We propose a novel deep metric learning method. Differently from many works on this area, we defined a novel latent space obtained through an autoencoder. The new space, namely S-space, is divided into different regions that describe the positions where pairs of objects are similar/dissimilar. We locate makers to identify these regions. We estimate the similarities between objects through a kernel…
▽ More
We propose a novel deep metric learning method. Differently from many works on this area, we defined a novel latent space obtained through an autoencoder. The new space, namely S-space, is divided into different regions that describe the positions where pairs of objects are similar/dissimilar. We locate makers to identify these regions. We estimate the similarities between objects through a kernel-based t-student distribution to measure the markers' distance and the new data representation. In our approach, we simultaneously estimate the markers' position in the S-space and represent the objects in the same space. Moreover, we propose a new regularization function to avoid similar markers to collapse altogether. We present evidences that our proposal can represent complex spaces, for instance, when groups of similar objects are located in disjoint regions. We compare our proposal to 9 different distance metric learning approaches (four of them are based on deep-learning) on 28 real-world heterogeneous datasets. According to the four quantitative metrics used, our method overcomes all the nine strategies from the literature.
△ Less
Submitted 18 November, 2020; v1 submitted 16 November, 2020;
originally announced November 2020.
-
Nota Técnica dos Modelos Implementados pelo Coletivo Covid19br para Projeções de Cenários Futuros da Pandemia COVID-19 no Brasil
Authors:
Daniel Severo,
Giuliano Netto Flores Cruz,
Alcides Carlos de Araújo,
André Marques dos Santos,
André Luiz Nunes Martins,
Carolina Ferreira da Silva,
Cristiane Schmitz,
Felipe Brum de Brito Sousa,
Gabriel Domingos de Arruda,
Gabriel Mendes Cabral Gondim,
Giovanna Ferraresso,
Joao Ricardo Vissoci,
Marcel Figueredo S. Figueredo,
Rafael Prudencio Moreira,
Ralf Lima da Costa,
Vito Ribeiro Venturieri,
Diógenes Adriano Rizzoto Justo
Abstract:
This technical note aims to provide a brief introduction to the projection models used by the group to project future scenarios for states and municipalities in real-time, according to the disease's behavior in previous days. However, the parameters can be modified by the user to design customized scenarios. The proposed model begins with the calculation of the basic reproduction number for the st…
▽ More
This technical note aims to provide a brief introduction to the projection models used by the group to project future scenarios for states and municipalities in real-time, according to the disease's behavior in previous days. However, the parameters can be modified by the user to design customized scenarios. The proposed model begins with the calculation of the basic reproduction number for the state or municipality based on the incidence of cases in the last 12 days. Once this is done, the epidemiological curve is projected using the SEIR compartmentalized epidemic model, in possession of this curve, part of the newly projected infected enter a simulation model for health systems in queuing theory, aiming to project future occupations and collapses.
△ Less
Submitted 25 April, 2020;
originally announced April 2020.
-
Robust H-infinity kinematic control of manipulator robots using dual quaternion algebra
Authors:
Luis Felipe Cruz Figueredo,
Bruno Vilhena Adorno,
João Yoshiyuki Ishihara
Abstract:
This paper proposes a robust dual-quaternion based H-infinity task-space kinematic controller for robot manipulators. To address the manipulator liability to modeling errors, uncertainties, exogenous disturbances, and their influence upon the kinematics of the end-effector pose, we adapt H-infinity techniques\textemdash suitable only for additive noises\textemdash to unit dual quaternions. The noi…
▽ More
This paper proposes a robust dual-quaternion based H-infinity task-space kinematic controller for robot manipulators. To address the manipulator liability to modeling errors, uncertainties, exogenous disturbances, and their influence upon the kinematics of the end-effector pose, we adapt H-infinity techniques\textemdash suitable only for additive noises\textemdash to unit dual quaternions. The noise to error attenuation within the H-infinity framework has the additional advantage of casting aside requirements concerning noise distributions, which are significantly hard to characterize within the group of rigid-body transformations. Using dual quaternion algebra, we provide a connection between performance effects over the end-effector trajectory and different sources of uncertainties and disturbances while satisfying attenuation requirements with minimum instantaneous control effort. The result is an easy-to-implement closed-form H-infinity control design criterion. The performance of the proposed strategy is evaluated within different realistic simulated scenarios and validated through real experiments.
△ Less
Submitted 21 June, 2021; v1 submitted 13 November, 2018;
originally announced November 2018.
-
Planning for Muscular and Peripersonal-Space Comfort during Human-Robot Forceful Collaboration
Authors:
Lipeng Chen,
Luis F C Figueredo,
Mehmet R. Dogar
Abstract:
This paper presents a planning algorithm designed to improve cooperative robot behavior concerning human comfort during forceful human-robot physical interaction. Particularly, we are interested in planning for object grasping and positioning ensuring not only stability against the exerted human force but also empowering the robot with capabilities to address and improve human experience and comfo…
▽ More
This paper presents a planning algorithm designed to improve cooperative robot behavior concerning human comfort during forceful human-robot physical interaction. Particularly, we are interested in planning for object grasping and positioning ensuring not only stability against the exerted human force but also empowering the robot with capabilities to address and improve human experience and comfort. Herein, comfort is addressed as both the muscular activation level required to exert the cooperative task, and the human spatial perception during the interaction, namely, the peripersonal space. By maximizing both comfort criteria, the robotic system can plan for the task (ensuring grasp stability) and for the human (improving human comfort). We believe this to be a key element to achieve intuitive and fluid human-robot interaction in real applications. Real HRI drilling and cutting experiments illustrated the efficiency of the proposed planner in improving overall comfort and HRI experience without compromising grasp stability.
△ Less
Submitted 19 October, 2018; v1 submitted 30 July, 2018;
originally announced July 2018.
-
Manipulation Planning under Changing External Forces
Authors:
Lipeng Chen,
Luis F. C. Figueredo,
Mehmet Dogar
Abstract:
In this work, we present a manipulation planning algorithm for a robot to keep an object stable under changing external forces. We particularly focus on the case where a human may be applying forceful operations, e.g. cutting or drilling, on an object that the robot is holding. The planner produces an efficient plan by intelligently deciding when the robot should change its grasp on the object as…
▽ More
In this work, we present a manipulation planning algorithm for a robot to keep an object stable under changing external forces. We particularly focus on the case where a human may be applying forceful operations, e.g. cutting or drilling, on an object that the robot is holding. The planner produces an efficient plan by intelligently deciding when the robot should change its grasp on the object as the human applies the forces. The planner also tries to choose subsequent grasps such that they will minimize the number of regrasps that will be required in the long-term. Furthermore, as it switches from one grasp to the other, the planner solves the problem of bimanual regrasp planning, where the object is not placed on a support surface, but instead it is held by a single gripper until the second gripper moves to a new position on the object. This requires the planner to also reason about the stability of the object under gravity.We provide an implementation on a bimanual robot and present experiments to show the performance of our planner.
△ Less
Submitted 30 July, 2018; v1 submitted 30 October, 2017;
originally announced October 2017.
-
Hybrid Kinematic Control for Rigid Body Pose Stabilization using Dual Quaternions
Authors:
Hugo T. M. Kussaba,
Luis F. C. Figueredo,
João Y. Ishihara,
Bruno V. Adorno
Abstract:
In this paper, we address the rigid body pose stabilization problem using dual quaternion formalism. We propose a hybrid control strategy to design a switching control law with hysteresis in such a way that the global asymptotic stability of the closed-loop system is guaranteed and such that the global attractivity of the stabilization pose does not exhibit chattering, a problem that is present in…
▽ More
In this paper, we address the rigid body pose stabilization problem using dual quaternion formalism. We propose a hybrid control strategy to design a switching control law with hysteresis in such a way that the global asymptotic stability of the closed-loop system is guaranteed and such that the global attractivity of the stabilization pose does not exhibit chattering, a problem that is present in all discontinuous-based feedback controllers. Using numerical simulations, we illustrate the problems that arise from existing results in the literature -- as unwinding and chattering -- and verify the effectiveness of the proposed controller to solve the robust global pose stability problem.
△ Less
Submitted 27 February, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.