-
Reinforcing increase of ΔTC in MgB2 smart meta-superconductors by adjusting the concentration of inhomogeneous phases
Authors:
Yongbo Li,
Guangyu Han,
Hongyan Zou,
Li Tang,
Honggang Chen,
Xiaopeng Zhao
Abstract:
Incorporating with inhomogeneous phases with high electroluminescence (EL) intensity to prepare smart meta-superconductors (SMSCs) is an effective method of increasing the superconducting transition temperature (Tc) and has been confirmed in both MgB2 and Bi(Pb)SrCaCuO systems. However, the increase of ΔTc has been quite small because of the low optimal concentrations of inhomogeneous phases. In t…
▽ More
Incorporating with inhomogeneous phases with high electroluminescence (EL) intensity to prepare smart meta-superconductors (SMSCs) is an effective method of increasing the superconducting transition temperature (Tc) and has been confirmed in both MgB2 and Bi(Pb)SrCaCuO systems. However, the increase of ΔTc has been quite small because of the low optimal concentrations of inhomogeneous phases. In this work, three kinds of MgB2 raw materials, namely, aMgB2, bMgB2, and cMgB2, were prepared with particle sizes decreasing in order. Inhomogeneous phases, Y2O3:Eu3+ and Y2O3:Eu3+/Ag, were also prepared and doped into MgB2 to study the influence of doping concentration on the ΔTc of MgB2 with different particle sizes. Results show that reducing the MgB2 particle size increases the optimal doping concentration of inhomogeneous phases, thereby increasing ΔTc. The optimal doping concentrations for aMgB2, bMgB2, and cMgB2 are 0.5%, 0.8%, and 1.2%, respectively. The corresponding ΔTc values are 0.4, 0.9, and 1.2 K, respectively. This work open a new approach to reinforcing increase of ΔTc in MgB2 SMSCs.
△ Less
Submitted 4 April, 2021; v1 submitted 3 February, 2021;
originally announced February 2021.
-
Multi-Vehicle Velocity Estimation Using IEEE 802.11ad Waveform
Authors:
Geonho Han,
Sucheol Kim,
Junil Choi
Abstract:
Wireless communication systems are to use millimeter-wave (mmWave) spectra, which can enable extra radar functionalities. In this paper, we propose a multi-target velocity estimation technique using IEEE 802.11ad waveform in a vehicle-to-vehicle (V2V) scenario. We form a wide beam to consider multiple target vehicles. The Doppler shift of each vehicle is estimated from least square estimation (LSE…
▽ More
Wireless communication systems are to use millimeter-wave (mmWave) spectra, which can enable extra radar functionalities. In this paper, we propose a multi-target velocity estimation technique using IEEE 802.11ad waveform in a vehicle-to-vehicle (V2V) scenario. We form a wide beam to consider multiple target vehicles. The Doppler shift of each vehicle is estimated from least square estimation (LSE) using the round-trip delay obtained from the auto-correlation property of Golay complementary sequences in IEEE 802.11ad waveform, and the phase wrapping is compensated by the Doppler shift estimates of proper two frames. Finally, the velocities of target vehicles are obtained from the estimated Doppler shifts. Simulation results show the proposed velocity estimation technique can achieve significantly high accuracy even for short coherent processing interval (CPI).
△ Less
Submitted 1 February, 2021; v1 submitted 31 January, 2021;
originally announced February 2021.
-
Task-Adaptive Negative Envision for Few-Shot Open-Set Recognition
Authors:
Shiyuan Huang,
Jiawei Ma,
Guangxing Han,
Shih-Fu Chang
Abstract:
We study the problem of few-shot open-set recognition (FSOR), which learns a recognition system capable of both fast adaptation to new classes with limited labeled examples and rejection of unknown negative samples. Traditional large-scale open-set methods have been shown ineffective for FSOR problem due to data limitation. Current FSOR methods typically calibrate few-shot closed-set classifiers t…
▽ More
We study the problem of few-shot open-set recognition (FSOR), which learns a recognition system capable of both fast adaptation to new classes with limited labeled examples and rejection of unknown negative samples. Traditional large-scale open-set methods have been shown ineffective for FSOR problem due to data limitation. Current FSOR methods typically calibrate few-shot closed-set classifiers to be sensitive to negative samples so that they can be rejected via thresholding. However, threshold tuning is a challenging process as different FSOR tasks may require different rejection powers. In this paper, we instead propose task-adaptive negative class envision for FSOR to integrate threshold tuning into the learning process. Specifically, we augment the few-shot closed-set classifier with additional negative prototypes generated from few-shot examples. By incorporating few-shot class correlations in the negative generation process, we are able to learn dynamic rejection boundaries for FSOR tasks. Besides, we extend our method to generalized few-shot open-set recognition (GFSOR), which requires classification on both many-shot and few-shot classes as well as rejection of negative samples. Extensive experiments on public benchmarks validate our methods on both problems.
△ Less
Submitted 18 July, 2022; v1 submitted 23 December, 2020;
originally announced December 2020.
-
InterPhon: Ab initio Interface Phonon Calculations within a 3D Electronic Structure Framework
Authors:
In Won Yeu,
Gyuseung Han,
Kun Hee Ye,
Cheol Seong Hwang,
Jung-Hae Choi
Abstract:
This work provides the community with an easily executable open-source Python package designed to automize the evaluation of Interfacial Phonons (InterPhon). Its strategy of arbitrarily defining the interfacial region and periodicity alleviates the excessive computational cost in applying ab initio phonon calculations to interfaces and enables efficient extraction of interfacial phonons. InterPhon…
▽ More
This work provides the community with an easily executable open-source Python package designed to automize the evaluation of Interfacial Phonons (InterPhon). Its strategy of arbitrarily defining the interfacial region and periodicity alleviates the excessive computational cost in applying ab initio phonon calculations to interfaces and enables efficient extraction of interfacial phonons. InterPhon makes it possible to apply all of the phonon-based predictions that have been available for bulk systems, to interfacial systems. The first example, in which this package was applied to InAs surfaces, demonstrates a systematic structure search for unexplored surface reconstructions, navigated by the imaginary mode of surface phonons. It eventually explains the anisotropic surface vibrations of the polar crystal. The second example, involving oxygen adsorption on Cu, reveals adsorption-induced vibrational change and its contribution to energetic stability. The third example, on a Si/GaAs interface, shows distinct vibrational patterns depending on interfacial structures. It leads to a prediction regarding the structural transition of interfaces and unveils the processing conditions for spontaneous growth of GaAs nanowires on Si. High-level automation in InterPhon will be of great help in elucidating interfacial atomic dynamics and in implementing an automated computational workflow for diverse interfacial systems.
△ Less
Submitted 21 April, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
A Galois Connection Approach to Wei-Type Duality Theorems
Authors:
Yang Xu,
Haibin Kan,
Guangyue Han
Abstract:
In $1991$, Wei proved a duality theorem that established an interesting connection between the generalized Hamming weights of a linear code and those of its dual code. Wei's duality theorem has since been extensively studied from different perspectives and extended to other settings. In this paper, we re-examine Wei's duality theorem and its various extensions, henceforth referred to as Wei-type d…
▽ More
In $1991$, Wei proved a duality theorem that established an interesting connection between the generalized Hamming weights of a linear code and those of its dual code. Wei's duality theorem has since been extensively studied from different perspectives and extended to other settings. In this paper, we re-examine Wei's duality theorem and its various extensions, henceforth referred to as Wei-type duality theorems, from a new Galois connection perspective. Our approach is based on the observation that the generalized Hamming weights and the dimension/length profiles of a linear code form a Galois connection. The central result in this paper is a general Wei-type duality theorem for two Galois connections between finite subsets of $\mathbb{Z}$, from which all the known Wei-type duality theorems can be recovered. As corollaries of our central result, we prove new Wei-type duality theorems for $w$-demimatroids defined over finite sets and $w$-demi-polymatroids defined over modules with a composition series, which further allows us to unify and generalize all the known Wei-type duality theorems established for codes endowed with various metrics.
△ Less
Submitted 22 July, 2021; v1 submitted 27 November, 2020;
originally announced November 2020.
-
Possible Magnetic Rotational Bands in 84^Rb
Authors:
Shuifa Shen,
Jiejie Shen,
Guangbing Han,
Shuxian Wen,
Yupeng Yan,
Haibing Jiang,
Zhixiong He,
Yaodong Song,
Weiwei Gao,
Jieqing Lan
Abstract:
High-spin states in 84Rb are studied by using the 70Zn(18O, p3n)84Rb reaction at a beam energy of 75 MeV. Three high-lying negative-parity bands are established, whose level spacings are very regular, i.e., there is no signature splitting. The dipole character of the transitions of these three bands is assigned by the gamma-gamma directional correlations of oriented states (DCO) intensity ratios a…
▽ More
High-spin states in 84Rb are studied by using the 70Zn(18O, p3n)84Rb reaction at a beam energy of 75 MeV. Three high-lying negative-parity bands are established, whose level spacings are very regular, i.e., there is no signature splitting. The dipole character of the transitions of these three bands is assigned by the gamma-gamma directional correlations of oriented states (DCO) intensity ratios and the multipolarity M1 is suggested by analogy with multiparticle excitations in neighboring nuclei. Strong M1 and weak or no E2 transitions are observed. All these characteristic features show they are magnetic rotational bands.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
-
Pairwise heuristic sequence alignment algorithm based on deep reinforcement learning
Authors:
Yong Joon Song,
Dong Jin Ji,
Hye In Seo,
Gyu Bum Han,
Dong Ho Cho
Abstract:
Various methods have been developed to analyze the association between organisms and their genomic sequences. Among them, sequence alignment is the most frequently used for comparative analysis of biological genomes. However, the traditional sequence alignment method is considerably complicated in proportion to the sequences' length, and it is significantly challenging to align long sequences such…
▽ More
Various methods have been developed to analyze the association between organisms and their genomic sequences. Among them, sequence alignment is the most frequently used for comparative analysis of biological genomes. However, the traditional sequence alignment method is considerably complicated in proportion to the sequences' length, and it is significantly challenging to align long sequences such as a human genome. Currently, several multiple sequence alignment algorithms are available that can reduce the complexity and improve the alignment performance of various genomes. However, there have been relatively fewer attempts to improve the alignment performance of the pairwise alignment algorithm. After grasping these problems, we intend to propose a new sequence alignment method using deep reinforcement learning. This research shows the application method of the deep reinforcement learning to the sequence alignment system and the way how the deep reinforcement learning can improve the conventional sequence alignment method.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
Epitaxial single-crystal growth of transition metal dichalcogenide monolayers via atomic sawtooth Au surface
Authors:
Soo Ho Choi,
Hyung-Jin Kim,
Bumsub Song,
Yong In Kim,
Gyeongtak Han,
Hayoung Ko,
Stephen Boandoh,
Ji Hoon Choi,
Chang Seok Oh,
Jeong Won Jin,
Seok Joon Yun,
Bong Gyu Shin,
Hu Young Jeong,
Young-Min Kim,
Young-Kyu Han,
Young Hee Lee,
Soo Min Kim,
Ki Kang Kim
Abstract:
Growth of two-dimensional van der Waals layered single-crystal (SC) films is highly desired to manifest intrinsic material sciences and unprecedented devices for industrial applications. While wafer-scale SC hexagonal boron nitride film has been successfully grown, an ideal growth platform for diatomic transition metal dichalcogenide (TMdC) film has not been established to date. Here, we report th…
▽ More
Growth of two-dimensional van der Waals layered single-crystal (SC) films is highly desired to manifest intrinsic material sciences and unprecedented devices for industrial applications. While wafer-scale SC hexagonal boron nitride film has been successfully grown, an ideal growth platform for diatomic transition metal dichalcogenide (TMdC) film has not been established to date. Here, we report the SC growth of TMdC monolayers in a centimeter scale via atomic sawtooth gold surface as a universal growth template. Atomic tooth-gullet surface is constructed by the one-step solidification of liquid gold, evidenced by transmission-electron-microscopy. Anisotropic adsorption energy of TMdC cluster, confirmed by density-functional calculations, prevails at the periodic atomic-step edge to yield unidirectional epitaxial growth of triangular TMdC grains, eventually forming the SC film, regardless of Miller indices. Growth using atomic sawtooth gold surface as a universal growth template is demonstrated for several TMdC monolayer films, including WS2, WSe2, MoS2, MoSe2/WSe2 heterostructure, and W1-xMoxS2 alloy. Our strategy provides a general avenue for the SC growth of diatomic van der Waals heterostructures in a wafer scale, to further facilitate the applications of TMdCs in post silicon technology.
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
Synthesis of narrow SnTe nanowires using alloy nanoparticles
Authors:
Pengzi Liu,
Hyeuk Jin Han,
Julia Wei,
David J. Hynek,
James L. Hart,
Myung Geun Han,
Christie J. Trimble,
James R. Williams,
Yimei Zhu,
Judy J. Cha
Abstract:
Topological crystalline insulator tin telluride (SnTe) provides a rich playground to examine interactions of correlated electronic states, such as ferroelectricity, topological surface states, and superconductivity. Making SnTe into nanowires further induces novel electronic states due to one-dimensional (1D) confinement effects. Thus, for transport measurements, SnTe nanowires must be made narrow…
▽ More
Topological crystalline insulator tin telluride (SnTe) provides a rich playground to examine interactions of correlated electronic states, such as ferroelectricity, topological surface states, and superconductivity. Making SnTe into nanowires further induces novel electronic states due to one-dimensional (1D) confinement effects. Thus, for transport measurements, SnTe nanowires must be made narrow in their diameters to ensure the 1D confinement and phase coherence of the topological surface electrons. This study reports a facile growth method to produce narrow SnTe nanowires with a high yield using alloy nanoparticles as growth catalysts. The average diameter of the SnTe nanowires grown using the alloy nanoparticles is 85 nm, nearly a factor of three reduction from the previous average diameter of 240 nm using gold nanoparticles as growth catalysts. Transport measurements reveal the effect of the nanowire diameter on the residual resistance ratio and magnetoresistance. Particularly, the ferroelectric transition temperature for SnTe is observed to change systematically with the nanowire diameter. In situ cryogenic cooling of narrow SnTe nanowires in a transmission electron microscope directly reveals the cubic to rhombohedral structural transition, which is associated with the ferroelectric transition. Thus, these narrow SnTe nanowires represent a model system to study electronic states arising from the 1D confinement, such as 1D topological superconductivity as well as a potential multi-band superconductivity.
△ Less
Submitted 15 October, 2020;
originally announced October 2020.
-
PiaNet: A pyramid input augmented convolutional neural network for GGO detection in 3D lung CT scans
Authors:
Weihua Liu,
Xiabi Liua,
Xiongbiao Luo,
Murong Wang,
Guanghui Han,
Xinming Zhao,
Zheng Zhu
Abstract:
This paper proposes a new convolutional neural network with multiscale processing for detecting ground-glass opacity (GGO) nodules in 3D computed tomography (CT) images, which is referred to as PiaNet for short. PiaNet consists of a feature-extraction module and a prediction module. The former module is constructed by introducing pyramid multiscale source connections into a contracting-expanding s…
▽ More
This paper proposes a new convolutional neural network with multiscale processing for detecting ground-glass opacity (GGO) nodules in 3D computed tomography (CT) images, which is referred to as PiaNet for short. PiaNet consists of a feature-extraction module and a prediction module. The former module is constructed by introducing pyramid multiscale source connections into a contracting-expanding structure. The latter module includes a bounding-box regressor and a classifier that are employed to simultaneously recognize GGO nodules and estimate bounding boxes at multiple scales. To train the proposed PiaNet, a two-stage transfer learning strategy is developed. In the first stage, the feature-extraction module is embedded into a classifier network that is trained on a large data set of GGO and non-GGO patches, which are generated by performing data augmentation from a small number of annotated CT scans. In the second stage, the pretrained feature-extraction module is loaded into PiaNet, and then PiaNet is fine-tuned using the annotated CT scans. We evaluate the proposed PiaNet on the LIDC-IDRI data set. The experimental results demonstrate that our method outperforms state-of-the-art counterparts, including the Subsolid CAD and Aidence systems and S4ND and GA-SSD methods. PiaNet achieves a sensitivity of 91.75% with only one false positive per scan
△ Less
Submitted 10 October, 2020; v1 submitted 11 September, 2020;
originally announced September 2020.
-
Perfect linear complexity profile and Apwenian sequences
Authors:
J. -P. Allouche,
G. -N. Han,
H. Niederreiter
Abstract:
Sequences with {\em perfect linear complexity profile} were defined more than thirty years ago in the study of measures of randomness for binary sequences. More recently {\em apwenian sequences}, first with values $\pm 1$, then with values in $\{0, 1\}$, were introduced in the study of Hankel determinants of automatic sequences. We explain that these two families of sequences are the same up to in…
▽ More
Sequences with {\em perfect linear complexity profile} were defined more than thirty years ago in the study of measures of randomness for binary sequences. More recently {\em apwenian sequences}, first with values $\pm 1$, then with values in $\{0, 1\}$, were introduced in the study of Hankel determinants of automatic sequences. We explain that these two families of sequences are the same up to indexing, and give consequences and questions that this implies. We hope that this will help gathering two distinct communities of researchers.
△ Less
Submitted 27 August, 2020;
originally announced August 2020.
-
Radar Imaging Based on IEEE 802.11ad Waveform
Authors:
Geonho Han,
Junil Choi
Abstract:
The extension to millimeter-wave (mmWave) spectrum of communication frequency band makes it easy to implement a joint radar and communication system using single hardware. In this paper, we propose radar imaging based on the IEEE 802.11ad waveform for a vehicular setting. The necessary parameters to be estimated for inverse synthetic aperture radar (ISAR) imaging are sampled version of round-trip…
▽ More
The extension to millimeter-wave (mmWave) spectrum of communication frequency band makes it easy to implement a joint radar and communication system using single hardware. In this paper, we propose radar imaging based on the IEEE 802.11ad waveform for a vehicular setting. The necessary parameters to be estimated for inverse synthetic aperture radar (ISAR) imaging are sampled version of round-trip delay, Doppler shift, and vehicular velocity. The delay is estimated using the correlation property of Golay complementary sequences embedded on the IEEE 802.11ad preamble. The Doppler shift is first obtained from least square estimation using radar return signals and refined by correcting the phase uncertainty of Doppler shift by phase rotation. The vehicular velocity is determined from the estimated Doppler shifts and an equation of motion. Finally, an ISAR image is formed with the acquired parameters. Simulation results show that it is possible to obtain recognizable ISAR image from a point scatterer model of a realistic vehicular setting.
△ Less
Submitted 11 September, 2020; v1 submitted 21 August, 2020;
originally announced August 2020.
-
Learning Common Harmonic Waves on Stiefel Manifold -- A New Mathematical Approach for Brain Network Analyses
Authors:
Jiazhou Chen,
Guoqiang Han,
Hongmin Cai,
Defu Yang,
Paul J. Laurienti,
Martin Styner,
Guorong Wu,
Alzheimer's Disease Neuroimaging Initiative ADNI
Abstract:
Converging evidence shows that disease-relevant brain alterations do not appear in random brain locations, instead, its spatial pattern follows large scale brain networks. In this context, a powerful network analysis approach with a mathematical foundation is indispensable to understand the mechanism of neuropathological events spreading throughout the brain. Indeed, the topology of each brain net…
▽ More
Converging evidence shows that disease-relevant brain alterations do not appear in random brain locations, instead, its spatial pattern follows large scale brain networks. In this context, a powerful network analysis approach with a mathematical foundation is indispensable to understand the mechanism of neuropathological events spreading throughout the brain. Indeed, the topology of each brain network is governed by its native harmonic waves, which are a set of orthogonal bases derived from the Eigen-system of the underlying Laplacian matrix. To that end, we propose a novel connectome harmonic analysis framework to provide enhanced mathematical insights by detecting frequency-based alterations relevant to brain disorders. The backbone of our framework is a novel manifold algebra appropriate for inference across harmonic waves that overcomes the limitations of using classic Euclidean operations on irregular data structures. The individual harmonic difference is measured by a set of common harmonic waves learned from a population of individual Eigen systems, where each native Eigen-system is regarded as a sample drawn from the Stiefel manifold. Specifically, a manifold optimization scheme is tailored to find the common harmonic waves which reside at the center of Stiefel manifold. To that end, the common harmonic waves constitute the new neuro-biological bases to understand disease progression. Each harmonic wave exhibits a unique propagation pattern of neuro-pathological burdens spreading across brain networks. The statistical power of our novel connectome harmonic analysis approach is evaluated by identifying frequency-based alterations relevant to Alzheimer's disease, where our learning-based manifold approach discovers more significant and reproducible network dysfunction patterns compared to Euclidian methods.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
TENet: Triple Excitation Network for Video Salient Object Detection
Authors:
Sucheng Ren,
Chu Han,
Xin Yang,
Guoqiang Han,
Shengfeng He
Abstract:
In this paper, we propose a simple yet effective approach, named Triple Excitation Network, to reinforce the training of video salient object detection (VSOD) from three aspects, spatial, temporal, and online excitations. These excitation mechanisms are designed following the spirit of curriculum learning and aim to reduce learning ambiguities at the beginning of training by selectively exciting f…
▽ More
In this paper, we propose a simple yet effective approach, named Triple Excitation Network, to reinforce the training of video salient object detection (VSOD) from three aspects, spatial, temporal, and online excitations. These excitation mechanisms are designed following the spirit of curriculum learning and aim to reduce learning ambiguities at the beginning of training by selectively exciting feature activations using ground truth. Then we gradually reduce the weight of ground truth excitations by a curriculum rate and replace it by a curriculum complementary map for better and faster convergence. In particular, the spatial excitation strengthens feature activations for clear object boundaries, while the temporal excitation imposes motions to emphasize spatio-temporal salient regions. Spatial and temporal excitations can combat the saliency shifting problem and conflict between spatial and temporal features of VSOD. Furthermore, our semi-curriculum learning design enables the first online refinement strategy for VSOD, which allows exciting and boosting saliency responses during testing without re-training. The proposed triple excitations can easily plug in different VSOD methods. Extensive experiments show the effectiveness of all three excitation methods and the proposed method outperforms state-of-the-art image and video salient object detection methods.
△ Less
Submitted 30 August, 2020; v1 submitted 20 July, 2020;
originally announced July 2020.
-
COVID-19 Literature Knowledge Graph Construction and Drug Repurposing Report Generation
Authors:
Qingyun Wang,
Manling Li,
Xuan Wang,
Nikolaus Parulian,
Guangxing Han,
Jiawei Ma,
Jingxuan Tu,
Ying Lin,
Haoran Zhang,
Weili Liu,
Aabhas Chauhan,
Yingjun Guan,
Bangzheng Li,
Ruisong Li,
Xiangchen Song,
Yi R. Fung,
Heng Ji,
Jiawei Han,
Shih-Fu Chang,
James Pustejovsky,
Jasmine Rah,
David Liem,
Ahmed Elsayed,
Martha Palmer,
Clare Voss
, et al. (2 additional authors not shown)
Abstract:
To combat COVID-19, both clinicians and scientists need to digest vast amounts of relevant biomedical knowledge in scientific literature to understand the disease mechanism and related biological functions. We have developed a novel and comprehensive knowledge discovery framework, COVID-KG to extract fine-grained multimedia knowledge elements (entities and their visual chemical structures, relatio…
▽ More
To combat COVID-19, both clinicians and scientists need to digest vast amounts of relevant biomedical knowledge in scientific literature to understand the disease mechanism and related biological functions. We have developed a novel and comprehensive knowledge discovery framework, COVID-KG to extract fine-grained multimedia knowledge elements (entities and their visual chemical structures, relations, and events) from scientific literature. We then exploit the constructed multimedia knowledge graphs (KGs) for question answering and report generation, using drug repurposing as a case study. Our framework also provides detailed contextual sentences, subfigures, and knowledge subgraphs as evidence.
△ Less
Submitted 11 May, 2021; v1 submitted 1 July, 2020;
originally announced July 2020.
-
Design and Performance Analysis of a New STBC-MIMO LoRa System
Authors:
Huan Ma,
Guofa Cai,
Yi Fang,
Pingping Chen,
Guojun Han
Abstract:
LoRa is a modulation technology for low power wide area networks (LPWAN) with enormous potential in 5G era. However, the performance of LoRa system deteriorates seriously in fading-channel environments. To tackle this problem, in this paper we introduce multiple-input-multiple-output (MIMO) configuration employing space-time block coding (STBC) schemes into the LoRa system to formulate an STBC-MIM…
▽ More
LoRa is a modulation technology for low power wide area networks (LPWAN) with enormous potential in 5G era. However, the performance of LoRa system deteriorates seriously in fading-channel environments. To tackle this problem, in this paper we introduce multiple-input-multiple-output (MIMO) configuration employing space-time block coding (STBC) schemes into the LoRa system to formulate an STBC-MIMO LoRa system. Then, we investigate the theoretical performance of the proposed system over Rayleigh fading channels. To this end, we derive the distribution of the decision metric for the demodulator in the proposed system. Based on the above distribution, we propose the closed-form approximated bit error rate (BER) expression of the proposed system when perfect and imperfect channel information states (CSIs) are considered. In addition, we analyze the diversity order of the proposed system. The result demonstrates that the diversity order of the system in the imperfect CSI scenario with fixed channel estimate error variance is zero. However, in the imperfect CSI scenario with a decreasing channel estimate error variance and the perfect CSI scenario, the system can achieve full diversity. Finally, experimental results verify the accuracy of the theoretical analysis and the excellent performance of the proposed system. Due to such superiority, the proposed STBC-MIMO LoRa system can be considered as a good scheme for LPWAN.
△ Less
Submitted 28 June, 2020;
originally announced June 2020.
-
Propagation control of octahedral tilt in SrRuO3 via artificial heterostructuring
Authors:
Seung Gyo Jeong,
Gyeongtak Han,
Sehwan Song,
Taewon Min,
Ahmed Yousef Mohamed,
Sungkyun Park,
Jaekwang Lee,
Hu Young Jeong,
Young-Min Kim,
Deok-Yong Cho,
Woo Seok Choi
Abstract:
Bonding geometry engineering of metal-oxygen octahedra is a facile way of tailoring various functional properties of transition metal oxides. Several approaches, including epitaxial strain, thickness, and stoichiometry control, have been proposed to efficiently tune the rotation and tilting of the octahedra, but these approaches are inevitably accompanied by unnecessary structural modifications su…
▽ More
Bonding geometry engineering of metal-oxygen octahedra is a facile way of tailoring various functional properties of transition metal oxides. Several approaches, including epitaxial strain, thickness, and stoichiometry control, have been proposed to efficiently tune the rotation and tilting of the octahedra, but these approaches are inevitably accompanied by unnecessary structural modifications such as changes in thin-film lattice parameters. In this study, we propose a method to selectively engineer the octahedral bonding geometries, while maintaining other parameters that might implicitly influence the functional properties. A concept of octahedral tilt propagation engineering has been developed using atomically designed SrRuO3/SrTiO3 superlattices. In particular, the propagation of RuO6 octahedral tilting within the SrRuO3 layers having identical thicknesses was systematically controlled by varying the thickness of adjacent SrTiO3 layers. This led to a substantial modification in the electromagnetic properties of the SrRuO3 layer, significantly enhancing the magnetic moment of Ru. Our approach provides a method to selectively manipulate the bonding geometry of strongly correlated oxides, thereby enabling a better understanding and greater controllability of their functional properties.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
Enumeration of Standard Puzzles
Authors:
Guo-Niu Han
Abstract:
We introduce a large family of combinatorial objects, called standard puzzles, defined by very simple rules. We focus on the standard puzzles for which the enumeration problems can be solved by explicit formulas or by classical numbers, such as binomial coefficients, Fibonacci numbers, tangent numbers, Catalan numbers, $\ldots$
We introduce a large family of combinatorial objects, called standard puzzles, defined by very simple rules. We focus on the standard puzzles for which the enumeration problems can be solved by explicit formulas or by classical numbers, such as binomial coefficients, Fibonacci numbers, tangent numbers, Catalan numbers, $\ldots$
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Derivatives, Eulerian polynomials and the $g$-indexes of Young tableaux
Authors:
G. -N. Han,
S. -M. Ma
Abstract:
In this paper we first present summation formulas for $k$-order Eulerian polynomials and $1/k$-Eulerian polynomials. We then present combinatorial expansions of $(c(x)D)^n$ in terms of inversion sequences as well as $k$-Young tableaux, where $c(x)$ is a differentiable function in the indeterminate $x$ and $D$ is the derivative with respect to $x$. We define the $g$-indexes of $k$-Young tableaux an…
▽ More
In this paper we first present summation formulas for $k$-order Eulerian polynomials and $1/k$-Eulerian polynomials. We then present combinatorial expansions of $(c(x)D)^n$ in terms of inversion sequences as well as $k$-Young tableaux, where $c(x)$ is a differentiable function in the indeterminate $x$ and $D$ is the derivative with respect to $x$. We define the $g$-indexes of $k$-Young tableaux and Young tableaux, which have important applications in combinatorics. By establishing some relations between $k$-Young tableaux and standard Young tableaux, we express Eulerian polynomials, second-order Eulerian polynomials, André polynomials and the generating polynomials of gamma coefficients of Eulerian polynomials in terms of standard Young tableaux, which imply a deep connection among these polynomials.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
On some conjectures of P. Barry
Authors:
J. -P. Allouche,
G. -N. Han,
J. Shallit
Abstract:
We prove a number of conjectures [arXiv:2005.04066] recently stated by P. Barry, related to the paperfolding sequence and the Rueppel sequence.
We prove a number of conjectures [arXiv:2005.04066] recently stated by P. Barry, related to the paperfolding sequence and the Rueppel sequence.
△ Less
Submitted 24 June, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
-
Quaternionic slice regular functions and quaternionic Laplace transforms
Authors:
Gang Han
Abstract:
The functions studied in the paper are quaternion-valued functions of a quaternionic variable. It is show that the left slice regular functions and right slice regular functions are related by a particular involution. The relation between left slice regular functions, right slice regular functions and intrinsic regular functions is revealed. The classical Laplace transform can be naturally general…
▽ More
The functions studied in the paper are quaternion-valued functions of a quaternionic variable. It is show that the left slice regular functions and right slice regular functions are related by a particular involution. The relation between left slice regular functions, right slice regular functions and intrinsic regular functions is revealed. The classical Laplace transform can be naturally generalized to quaternions in two different ways, which transform a quaternion-valued function of a real variable to a left or right slice regular quaternion-valued function of a quaternionic variable. The usual properties of the classical Laplace transforms are generalized to quaternionic Laplace transforms.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Adaptive Gradient Coding
Authors:
Hankun Cao,
Qifa Yan,
Xiaohu Tang,
Guojun Han
Abstract:
This paper focuses on mitigating the impact of stragglers in distributed learning system. Unlike the existing results designed for a fixed number of stragglers, we developed a new scheme called Adaptive Gradient Coding(AGC) with flexible tolerance of various number of stragglers. Our scheme gives an optimal tradeoff between computation load, straggler tolerance and communication cost. In particula…
▽ More
This paper focuses on mitigating the impact of stragglers in distributed learning system. Unlike the existing results designed for a fixed number of stragglers, we developed a new scheme called Adaptive Gradient Coding(AGC) with flexible tolerance of various number of stragglers. Our scheme gives an optimal tradeoff between computation load, straggler tolerance and communication cost. In particular, it allows to minimize the communication cost according to the real-time number of stragglers in the practical environments. Implementations on Amazon EC2 clusters using Python with mpi4py package verify the flexibility in several situations.
△ Less
Submitted 18 October, 2021; v1 submitted 8 June, 2020;
originally announced June 2020.
-
Context-aware and Scale-insensitive Temporal Repetition Counting
Authors:
Huaidong Zhang,
Xuemiao Xu,
Guoqiang Han,
Shengfeng He
Abstract:
Temporal repetition counting aims to estimate the number of cycles of a given repetitive action. Existing deep learning methods assume repetitive actions are performed in a fixed time-scale, which is invalid for the complex repetitive actions in real life. In this paper, we tailor a context-aware and scale-insensitive framework, to tackle the challenges in repetition counting caused by the unknown…
▽ More
Temporal repetition counting aims to estimate the number of cycles of a given repetitive action. Existing deep learning methods assume repetitive actions are performed in a fixed time-scale, which is invalid for the complex repetitive actions in real life. In this paper, we tailor a context-aware and scale-insensitive framework, to tackle the challenges in repetition counting caused by the unknown and diverse cycle-lengths. Our approach combines two key insights: (1) Cycle lengths from different actions are unpredictable that require large-scale searching, but, once a coarse cycle length is determined, the variety between repetitions can be overcome by regression. (2) Determining the cycle length cannot only rely on a short fragment of video but a contextual understanding. The first point is implemented by a coarse-to-fine cycle refinement method. It avoids the heavy computation of exhaustively searching all the cycle lengths in the video, and, instead, it propagates the coarse prediction for further refinement in a hierarchical manner. We secondly propose a bidirectional cycle length estimation method for a context-aware prediction. It is a regression network that takes two consecutive coarse cycles as input, and predicts the locations of the previous and next repetitive cycles. To benefit the training and evaluation of temporal repetition counting area, we construct a new and largest benchmark, which contains 526 videos with diverse repetitive actions. Extensive experiments show that the proposed network trained on a single dataset outperforms state-of-the-art methods on several benchmarks, indicating that the proposed framework is general enough to capture repetition patterns across domains.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
$k$-arrangements, statistics and patterns
Authors:
Shishuo Fu,
Guo-Niu Han,
Zhicong Lin
Abstract:
The $k$-arrangements are permutations whose fixed points are $k$-colored. We prove enumerative results related to statistics and patterns on $k$-arrangements, confirming several conjectures by Blitvić and Steingrímsson. In particular, one of their conjectures regarding the equdistribution of the number of descents over the derangement form and the permutation form of $k$-arrangements is strengthen…
▽ More
The $k$-arrangements are permutations whose fixed points are $k$-colored. We prove enumerative results related to statistics and patterns on $k$-arrangements, confirming several conjectures by Blitvić and Steingrímsson. In particular, one of their conjectures regarding the equdistribution of the number of descents over the derangement form and the permutation form of $k$-arrangements is strengthened in two interesting ways. Moreover, as one application of the so-called Decrease Value Theorem, we calculate the generating function for a symmetric pair of Eulerian statistics over permutations arising in our study.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Design of Link-Selection Strategies for Buffer-Aided DCSK-SWIPT Relay System
Authors:
Mi Qian,
Guofa Cai,
Yi Fang,
Guojun Han
Abstract:
Adaptive link selection for buffer-aided relaying can achieve significant performance gain compared with the conventional relaying with fixed transmission criterion. However, most of the existing link-selection strategies are designed based on perfect channel state information (CSI), which are very complex by requiring channel estimator. To solve this issue, in this paper, we investigate a buffer-…
▽ More
Adaptive link selection for buffer-aided relaying can achieve significant performance gain compared with the conventional relaying with fixed transmission criterion. However, most of the existing link-selection strategies are designed based on perfect channel state information (CSI), which are very complex by requiring channel estimator. To solve this issue, in this paper, we investigate a buffer-aided differential chaos-shift-keying based simultaneous wireless information and power transfer (DCSK-SWIPT) relay system, where a decode-and-forward protocol is considered and the relay is equipped with a data buffer and an energy buffer. In particular, we propose two link-selection protocols for the proposed system based on harvested energy, data-buffer status and energy-shortage status, where the CSI is replaced by the harvested energy to avoid the channel estimation and the practical problem of the decoding cost at the relay is considered. Furthermore, the bit-error-rate (BER) and average-delay closed-form expressions of the proposed protocols are derived over multipath Rayleigh fading channels, which are validated via simulations. Finally, results demonstrate that both the proposed protocols not only provide better BER performance than the conventional DCSK system and DCSK-SWIPT relay system but also achieve better BER performance and lower average delay in comparison to the conventional signal-to-noise-ratio-based buffer-aided DCSK-SWIPT relay systems.
△ Less
Submitted 7 April, 2020;
originally announced May 2020.
-
Design of an MISO-SWIPT-Aided Code-Index Modulated Multi-Carrier M-DCSK System for e-Health IoT
Authors:
Guofa Cai,
Yi Fang,
Pingping Chen,
Guojun Han,
Guoen Cai,
Yang Song
Abstract:
Code index modulated multi-carrier M-ary differential chaos shift keying (CIM-MC-M-DCSK) system not only inherits low-power and low-complexity advantages of the conventional DCSK system, but also significantly increases the transmission rate. This feature is of particular importance to Internet of Things (IoT) with trillions of low-cost devices. In particular, for e-health IoT applications, an eff…
▽ More
Code index modulated multi-carrier M-ary differential chaos shift keying (CIM-MC-M-DCSK) system not only inherits low-power and low-complexity advantages of the conventional DCSK system, but also significantly increases the transmission rate. This feature is of particular importance to Internet of Things (IoT) with trillions of low-cost devices. In particular, for e-health IoT applications, an efficient transmission scheme is designed to solve the challenge of the limited battery capacity for numerous user equipments served by one base station. In this paper, a new multiple-input-single-output simultaneous wireless information and power transfer (MISO-SWIPT) scheme for CIM-MC-M-DCSK system is proposed by utilizing orthogonal characteristic of chaotic signals with different initial values. The proposed system adopts power splitting mode, which is very promising for simultaneously providing energy and transmitting information of the user equipments without any external power supply. In particular, the new system can achieve desirable anti-multipath-fading capability without using channel estimator. Moreover, the analytical bit-error-rate expression of the proposed system is derived over multipath Rayleigh fading channels. Furthermore, the spectral efficiency and energy efficiency of the proposed system are analyzed. Simulation results not only validate the analytical expressions, but also demonstrate the superiority of the proposed system.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
On Sampling Continuous-Time AWGN Channels
Authors:
Guangyue Han,
Shlomo Shamai
Abstract:
For a continuous-time additive white Gaussian noise (AWGN) channel with possible feedback, it has been shown that as sampling gets infinitesimally fine, the mutual information of the associative discrete-time channels converges to that of the original continuous-time channel. We give in this paper more quantitative strengthenings of this result, which, among other implications, characterize how ov…
▽ More
For a continuous-time additive white Gaussian noise (AWGN) channel with possible feedback, it has been shown that as sampling gets infinitesimally fine, the mutual information of the associative discrete-time channels converges to that of the original continuous-time channel. We give in this paper more quantitative strengthenings of this result, which, among other implications, characterize how over-sampling approaches the true mutual information of a continuous-time Gaussian channel with bandwidth limit. The assumptions in our results are relatively mild. In particular, for the non-feedback case, compared to the Shannon-Nyquist sampling theorem, a widely used tool to connect continuous-time Gaussian channels to their discrete-time counterparts that requires the band-limitedness of the channel input, our results only require some integrability conditions on the power spectral density function of the input.
△ Less
Submitted 23 August, 2020; v1 submitted 7 February, 2020;
originally announced February 2020.
-
Generation-Distillation for Efficient Natural Language Understanding in Low-Data Settings
Authors:
Luke Melas-Kyriazi,
George Han,
Celine Liang
Abstract:
Over the past year, the emergence of transfer learning with large-scale language models (LM) has led to dramatic performance improvements across a broad range of natural language understanding tasks. However, the size and memory footprint of these large LMs makes them difficult to deploy in many scenarios (e.g. on mobile phones). Recent research points to knowledge distillation as a potential solu…
▽ More
Over the past year, the emergence of transfer learning with large-scale language models (LM) has led to dramatic performance improvements across a broad range of natural language understanding tasks. However, the size and memory footprint of these large LMs makes them difficult to deploy in many scenarios (e.g. on mobile phones). Recent research points to knowledge distillation as a potential solution, showing that when training data for a given task is abundant, it is possible to distill a large (teacher) LM into a small task-specific (student) network with minimal loss of performance. However, when such data is scarce, there remains a significant performance gap between large pretrained LMs and smaller task-specific models, even when training via distillation. In this paper, we bridge this gap with a novel training approach, called generation-distillation, that leverages large finetuned LMs in two ways: (1) to generate new (unlabeled) training examples, and (2) to distill their knowledge into a small network using these examples. Across three low-resource text classification datsets, we achieve comparable performance to BERT while using 300x fewer parameters, and we outperform prior approaches to distillation for text classification while using 3x fewer parameters.
△ Less
Submitted 25 January, 2020;
originally announced February 2020.
-
Criteria for apwenian sequences
Authors:
Ying-Jun Guo,
Guo-Niu Han,
Wen Wu
Abstract:
In 1998, Allouche, Peyrière, Wen and Wen showed that the Hankel determinant $H_n$ of the Thue-Morse sequence over $\{-1,1\}$ satisfies $H_n/2^{n-1}\equiv 1~(\mathrm{mod}~2)$ for all $n\geq 1$. Inspired by this result, Fu and Han introduced \emph{apwenian} sequences over $\{-1,1\}$, namely, $\pm 1$ sequences whose Hankel determinants satisfy $H_n/2^{n-1}\equiv 1~(\mathrm{mod}~2)$ for all $n\geq 1$,…
▽ More
In 1998, Allouche, Peyrière, Wen and Wen showed that the Hankel determinant $H_n$ of the Thue-Morse sequence over $\{-1,1\}$ satisfies $H_n/2^{n-1}\equiv 1~(\mathrm{mod}~2)$ for all $n\geq 1$. Inspired by this result, Fu and Han introduced \emph{apwenian} sequences over $\{-1,1\}$, namely, $\pm 1$ sequences whose Hankel determinants satisfy $H_n/2^{n-1}\equiv 1~(\mathrm{mod}~2)$ for all $n\geq 1$, and proved with computer assistance that a few sequences are apwenian. In this paper, we obtain an easy to check criterion for apwenian sequences, which allows us to determine all apwenian sequences that are fixed points of substitutions of constant length. Let $f(z)$ be the generating functions of such apwenian sequences. We show that for all integer $b\ge 2$ with $f(1/b)\neq 0$, the real number $f(1/b)$ is transcendental and its irrationality exponent is equal to $2$.
Besides, we also derive a criterion for zero-one apwenian sequences whose Hankel determinants satisfy $H_n\equiv 1~(\mathrm{mod}~2)$ for all $n\geq 1$. We find that the only zero-one apwenian sequence, among all fixed points of substitutions of constant length, is the period-doubling sequence. Various examples of apwenian sequences given by substitutions with projection are also given. Furthermore, we prove that all Sturmian sequences over $\{-1,1\}$ or $\{0,1\}$ are not apwenian. And we conjecture that fixed points of substitution of non-constant length over $\{-1,1\}$ or $\{0,1\}$ can not be apwenian.
△ Less
Submitted 28 June, 2021; v1 submitted 28 January, 2020;
originally announced January 2020.
-
The Langberg-Médard Multiple Unicast Conjecture: Stable $3$-Pair Networks
Authors:
Kai Cai,
Guangyue Han
Abstract:
The Langberg-Médard multiple unicast conjecture claims that for a strongly reachable $k$-pair network, there exists a multi-flow with rate $(1,1,\dots,1)$. In this paper, we show that the conjecture holds true for {\em stable} $3$-pair networks.
The Langberg-Médard multiple unicast conjecture claims that for a strongly reachable $k$-pair network, there exists a multi-flow with rate $(1,1,\dots,1)$. In this paper, we show that the conjecture holds true for {\em stable} $3$-pair networks.
△ Less
Submitted 19 April, 2020; v1 submitted 7 January, 2020;
originally announced January 2020.
-
On the roots of the Poupard and Kreweras polynomials
Authors:
Frédéric Chapoton,
Guo-Niu Han
Abstract:
The Poupard polynomials are polynomials in one variable with integer coefficients, with some close relationship to Bernoulli and tangent numbers. They also have a combinatorial interpretation. We prove that every Poupard polynomial has all its roots on the unit circle. We also obtain the same property for another sequence of polynomials introduced by Kreweras and related to Genocchi numbers. This…
▽ More
The Poupard polynomials are polynomials in one variable with integer coefficients, with some close relationship to Bernoulli and tangent numbers. They also have a combinatorial interpretation. We prove that every Poupard polynomial has all its roots on the unit circle. We also obtain the same property for another sequence of polynomials introduced by Kreweras and related to Genocchi numbers. This is obtained through a general statement about some linear operators acting on palindromic polynomials.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
Smart Home Appliances: Chat with Your Fridge
Authors:
Denis Gudovskiy,
Gyuri Han,
Takuya Yamaguchi,
Sotaro Tsukizawa
Abstract:
Current home appliances are capable to execute a limited number of voice commands such as turning devices on or off, adjusting music volume or light conditions. Recent progress in machine reasoning gives an opportunity to develop new types of conversational user interfaces for home appliances. In this paper, we apply state-of-the-art visual reasoning model and demonstrate that it is feasible to as…
▽ More
Current home appliances are capable to execute a limited number of voice commands such as turning devices on or off, adjusting music volume or light conditions. Recent progress in machine reasoning gives an opportunity to develop new types of conversational user interfaces for home appliances. In this paper, we apply state-of-the-art visual reasoning model and demonstrate that it is feasible to ask a smart fridge about its contents and various properties of the food with close-to-natural conversation experience. Our visual reasoning model answers user questions about existence, count, category and freshness of each product by analyzing photos made by the image sensor inside the smart fridge. Users may chat with their fridge using off-the-shelf phone messenger while being away from home, for example, when shopping in the supermarket. We generate a visually realistic synthetic dataset to train machine learning reasoning model that achieves 95% answer accuracy on test data. We present the results of initial user tests and discuss how we modify distribution of generated questions for model training based on human-in-the-loop guidance. We open source code for the whole system including dataset generation, reasoning model and demonstration scripts.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Quantum critical scaling for finite temperature Mott-like metal-insulator crossover in a few layered-MoS$_2$
Authors:
Byoung Hee Moon,
Gang Hee Han,
Miloš M. Radonjić,
Hyunjin Ji,
Vladimir Dobrosavljević
Abstract:
The possibility of the strong electron-electron interaction driven insulating phase from the metallic phase in two-dimensions has been suggested for clean systems without intentional disorder, but its rigorous demonstration is still lacking. Here, we examine the finite-temperature transport behavior of a few layered-MoS$_2$ material in the vicinity of the density-driven metal-insulator transition…
▽ More
The possibility of the strong electron-electron interaction driven insulating phase from the metallic phase in two-dimensions has been suggested for clean systems without intentional disorder, but its rigorous demonstration is still lacking. Here, we examine the finite-temperature transport behavior of a few layered-MoS$_2$ material in the vicinity of the density-driven metal-insulator transition (MIT), revealing previously overlooked universal features characteristic of strongly correlated electron systems. Our scaling analysis, based on the Wigner-Mott theoretical viewpoint, conclusively demonstrates that the transition is driven by strong electron-electron interactions and not disorder, in striking resemblance to what is seen in other Mott systems. Our results provide compelling evidence that transition-metal dichalcogenides provide an ideal testing ground for the study of strong correlation physics, which should open an exciting avenue for future research, making a parallel with recent advances in twisted bilayer graphene
△ Less
Submitted 11 November, 2019; v1 submitted 7 November, 2019;
originally announced November 2019.
-
Analysis of CNN-based remote-PPG to understand limitations and sensitivities
Authors:
Qi Zhan,
Wenjin Wang,
Gerard de Haan
Abstract:
Deep learning based on Convolutional Neural Network (CNN) has shown promising results in various vision-based applications, recently also in camera-based vital signs monitoring. The CNN-based Photoplethysmography (PPG) extraction has, so far, been focused on performance rather than understanding. In this paper, we try to answer four questions with experiments aiming at improving our understanding…
▽ More
Deep learning based on Convolutional Neural Network (CNN) has shown promising results in various vision-based applications, recently also in camera-based vital signs monitoring. The CNN-based Photoplethysmography (PPG) extraction has, so far, been focused on performance rather than understanding. In this paper, we try to answer four questions with experiments aiming at improving our understanding of this methodology as it gains popularity. We conclude that the network exploits the blood absorption variation to extract the physiological signals, and that the choice and parameters (phase, spectral content, etc.) of the reference-signal may be more critical than anticipated. The availability of multiple convolutional kernels is necessary for CNN to arrive at a flexible channel combination through the spatial operation, but may not provide the same motion-robustness as a multi-site measurement using knowledge-based PPG extraction. Finally, we conclude that the PPG-related prior knowledge is still helpful for the CNN-based PPG extraction. Consequently, we recommend further investigation of hybrid CNN-based methods to include prior knowledge in their design.
△ Less
Submitted 5 February, 2020; v1 submitted 6 November, 2019;
originally announced November 2019.
-
On the existence of permutations conditioned by certain rational functions
Authors:
Guo-Niu Han
Abstract:
We prove several conjectures made by Z.-W. Sun on the existence of permutations conditioned by certain rational functions. Furthermore, we fully characterize all integer values of the "inverse difference" rational function. Our proofs consist of both investigation of the mathematical properties of the rational functions and brute-force attack by computer for finding special permutations.
We prove several conjectures made by Z.-W. Sun on the existence of permutations conditioned by certain rational functions. Furthermore, we fully characterize all integer values of the "inverse difference" rational function. Our proofs consist of both investigation of the mathematical properties of the rational functions and brute-force attack by computer for finding special permutations.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Received Signal Strength Based Wireless Source Localization with Inaccurate Anchor Position
Authors:
Yang Liu,
Guojun Han,
Yonghua Wang,
Zheng Xue,
Jing Chen
Abstract:
Received signal strength (RSS)-based wireless localization is easy to implement at low cost. In practice,exact positions of anchors may not be available. This paper focuses on determining the location of a source in the presence of inaccurate positions of anchors based on RSS directly. We first use Taylor expansion and a min-max approach to get a maximum likelihood estimator of the coordinates of…
▽ More
Received signal strength (RSS)-based wireless localization is easy to implement at low cost. In practice,exact positions of anchors may not be available. This paper focuses on determining the location of a source in the presence of inaccurate positions of anchors based on RSS directly. We first use Taylor expansion and a min-max approach to get a maximum likelihood estimator of the coordinates of the source. Then we propose a relaxed semi-definite programming model to circumvent the non-convexity. We also propose a rounding algorithm considering both inaccurate source location and inaccurate anchor locations.Simulation results together with analysis are presented to validate the proposed method.
△ Less
Submitted 27 December, 2021; v1 submitted 8 August, 2019;
originally announced August 2019.
-
On the automaticity of sequences defined by continued fractions
Authors:
Guoniu Han,
Yining Hu
Abstract:
Continued fraction expansions and Hankel determinants of automatic sequences are extensively studied during the last two decades. These studies found applications in number theory in evaluating irrationality exponents. The present paper is motivated by the converse problem: to study continued fractions of which the elements form an automatic sequence. We consider two such continued fractions defin…
▽ More
Continued fraction expansions and Hankel determinants of automatic sequences are extensively studied during the last two decades. These studies found applications in number theory in evaluating irrationality exponents. The present paper is motivated by the converse problem: to study continued fractions of which the elements form an automatic sequence. We consider two such continued fractions defined by the Thue-Morse and period-doubling sequences respectively, and prove that they are congruent to algebraic series in $\mathbb{Z}[[x]]$ modulo $4$. Consequently, the sequences of the coefficients of the power series expansions of the two continued fractions modulo $4$ are $2$-automatic. Our approach is to first guess the explicit formulas of certain subsequences of $(P_n(x))$ and $(Q_n(x))$, where $P_n(x)/Q_n(x)$ is the canonical representation of the truncated continued fractions, then prove these formulas by an intricate induction involving eight subsequences while exploiting the relations between these subsequences.
△ Less
Submitted 13 August, 2019; v1 submitted 6 August, 2019;
originally announced August 2019.
-
Smart metastructure method for increasing TC of Bi(Pb)SrCaCuO high-temperature superconductors
Authors:
Honggang Chen,
Yongbo Li,
Mingzhong Wang,
Guangyu Han,
Miao Shi,
Xiaopeng Zhao
Abstract:
Improving the critical transition temperature (TC) of Bi(Pb)SrCaCuO (B(P)SCCO) high-temperature superconductors is important, however, considerable challenges exist. In this study, on the basis of the metamaterial structure and the idea that the injecting energy will promote the formation of Cooper pairs, a smart meta-superconductor B(P)SCCO consisting of B(P)SCCO microparticles and Y2O3:Eu3++Ag o…
▽ More
Improving the critical transition temperature (TC) of Bi(Pb)SrCaCuO (B(P)SCCO) high-temperature superconductors is important, however, considerable challenges exist. In this study, on the basis of the metamaterial structure and the idea that the injecting energy will promote the formation of Cooper pairs, a smart meta-superconductor B(P)SCCO consisting of B(P)SCCO microparticles and Y2O3:Eu3++Ag or Y2O3:Eu3+ luminophor was designed. In the applied electric field, the Y2O3:Eu3++Ag or Y2O3:Eu3+ luminophor generates an electroluminescence (EL), thereby promoting the TC via EL energy injection. A series of Y2O3:Eu3++Ag topological luminophor-doped B(P)SCCO samples was prepared. Results showed that Y2O3:Eu3++Ag was dispersed around B(P)SCCO particles, forming a metastructure. Accordingly, the onset transition temperature (T_(C,on)) and zero resistance transition temperature (T_(C,0)) of B(P)SCCO increased. Meanwhile, the B(P)SCCO sample doped with 0.2 wt% Y2O3 or Y2O3:Sm3+ nonluminous inhomogeneous phase was also prepared to further prove the influence of EL on the T_C rather than the rare earth effect. Results indicated that the TC of the Y2O3 or Y2O3:Sm3+ doping sample decreased. However, the TC of the 0.2 wt% Y2O3:Eu3++Ag or Y2O3:Eu3+ luminophor-doped sample improved. This outcome further demonstrated that the smart metastructure method can improve the TC of B(P)SCCO.
△ Less
Submitted 15 January, 2020; v1 submitted 26 June, 2019;
originally announced June 2019.
-
A New Proof of Hopf's Inequality Using a Complex Extension of the Hilbert Metric
Authors:
Wendi Han,
Guangyue Han
Abstract:
It is well known from the Perron-Frobenius theory that the spectral gap of a positive square matrix is positive. In this paper, we give a more quantitative characterization of the spectral gap. More specifically, using a complex extension of the Hilbert metric, we show that the so-called spectral ratio of a positive square matrix is upper bounded by its Birkhoff contraction coefficient, which in t…
▽ More
It is well known from the Perron-Frobenius theory that the spectral gap of a positive square matrix is positive. In this paper, we give a more quantitative characterization of the spectral gap. More specifically, using a complex extension of the Hilbert metric, we show that the so-called spectral ratio of a positive square matrix is upper bounded by its Birkhoff contraction coefficient, which in turn yields a lower bound on its spectral gap.
△ Less
Submitted 16 July, 2019; v1 submitted 11 June, 2019;
originally announced June 2019.
-
Hankel Continued fractions and Hankel determinants of the Euler numbers
Authors:
Guo-Niu Han
Abstract:
The Euler numbers occur in the Taylor expansion of $\tan(x)+\sec(x)$. Since Stieltjes, continued fractions and Hankel determinants of the even Euler numbers, on the one hand, of the odd Euler numbers, on the other hand, have been widely studied separately. However, no Hankel determinants of the (mixed) Euler numbers have been obtained and explicitly calculated. The reason for that is that some Han…
▽ More
The Euler numbers occur in the Taylor expansion of $\tan(x)+\sec(x)$. Since Stieltjes, continued fractions and Hankel determinants of the even Euler numbers, on the one hand, of the odd Euler numbers, on the other hand, have been widely studied separately. However, no Hankel determinants of the (mixed) Euler numbers have been obtained and explicitly calculated. The reason for that is that some Hankel determinants of the Euler numbers are null. This implies that the Jacobi continued fraction of the Euler numbers does not exist. In the present paper, this obstacle is bypassed by using the Hankel continued fraction, instead of the $J$-fraction. Consequently, an explicit formula for the Hankel determinants of the Euler numbers is being derived, as well as a full list of Hankel continued fractions and Hankel determinants involving Euler numbers. Finally, a new $q$-analog of the Euler numbers $E_n(q)$ based on our continued fraction is proposed. We obtain an explicit formula for $E_n(-1)$ and prove a conjecture by R. J. Mathar on these numbers.
△ Less
Submitted 9 October, 2019; v1 submitted 31 May, 2019;
originally announced June 2019.
-
Learning Symmetric and Asymmetric Steganography via Adversarial Training
Authors:
Zheng Li,
Ge Han,
Yunqing Wei,
Shanqing Guo
Abstract:
Steganography refers to the art of concealing secret messages within multiple media carriers so that an eavesdropper is unable to detect the presence and content of the hidden messages. In this paper, we firstly propose a novel key-dependent steganographic scheme that achieves steganographic objectives with adversarial training. Symmetric (secret-key) and Asymmetric (public-key) steganographic sch…
▽ More
Steganography refers to the art of concealing secret messages within multiple media carriers so that an eavesdropper is unable to detect the presence and content of the hidden messages. In this paper, we firstly propose a novel key-dependent steganographic scheme that achieves steganographic objectives with adversarial training. Symmetric (secret-key) and Asymmetric (public-key) steganographic scheme are separately proposed and each scheme is successfully designed and implemented. We show that these encodings produced by our scheme improve the invisibility by 20% than previous deep-leanring-based work, and further that perform competitively remarkable undetectability 25% better than classic steganographic algorithms. Finally, we simulated our scheme in a real situation where the decoder achieved an accuracy of more than 98% of the original message.
△ Less
Submitted 4 June, 2019; v1 submitted 12 March, 2019;
originally announced March 2019.
-
Outage-Limit-Approaching Protograph LDPC Codes for Slow-Fading Wireless Communications
Authors:
Yi Fang,
Pingping Chen,
Guofa Cai,
Francis C. M. Lau,
Soung Chang Liew,
Guojun Han
Abstract:
Block-fading (BF) channel, also known as slow-fading channel, is a type of simple and practical channel model that can characterize the primary feature of a number of wireless-communication applications with low to moderate mobility. Although the BF channel has received significant research attention in the past twenty years, designing low-complexity outage-limit-approaching error-correction codes…
▽ More
Block-fading (BF) channel, also known as slow-fading channel, is a type of simple and practical channel model that can characterize the primary feature of a number of wireless-communication applications with low to moderate mobility. Although the BF channel has received significant research attention in the past twenty years, designing low-complexity outage-limit-approaching error-correction codes (ECCs) is still a challenging issue. For this reason, a novel family of protograph low-density parity-check (LDPC) codes, called root-protograph (RP) LDPC codes, has been conceived recently. The RP codes can not only realize linear-complexity encoding and high-speed decoding with the help of a quasi-cyclic (QC) structure, but also achieve near-outage-limit performance in a variety of BF scenarios. In this article, we briefly review the design guidelines of such protograph codes with the aim of inspiring further research activities in this area.
△ Less
Submitted 20 July, 2021; v1 submitted 4 March, 2019;
originally announced March 2019.
-
A Wong-Zakai Approximation of Stochastic Differential Equations Driven by a General Semimartingale
Authors:
Xianming Liu,
Guangyue Han
Abstract:
We examine a Wong-Zakai type approximation of a family of stochastic differential equations driven by a general cadlag semimartingale. For such an approximation, compared with the pointwise convergence result by Kurtz, Pardoux and Protter [12, Theorem 6.5], we establish stronger convergence results under the Skorokhod M_1-topology, which, among other possible applications, implies the convergence…
▽ More
We examine a Wong-Zakai type approximation of a family of stochastic differential equations driven by a general cadlag semimartingale. For such an approximation, compared with the pointwise convergence result by Kurtz, Pardoux and Protter [12, Theorem 6.5], we establish stronger convergence results under the Skorokhod M_1-topology, which, among other possible applications, implies the convergence of the first passage time of the solution to the stochastic differential equation.
△ Less
Submitted 18 February, 2019;
originally announced February 2019.
-
QoS-Aware Buffer-Aided Relaying Implant WBAN for Healthcare IoT: Opportunities and Challenges
Authors:
Guofa Cai,
Yi Fang,
Jinming Wen,
Guojun Han,
Xiaodong Yang
Abstract:
Internet of Things (IoT) have motivated a paradigm shift in the development of various applications such as mobile health. Wireless body area network (WBAN) comprises many low-power devices in, on, or around the human body, which offers a desirable solution to monitor physiological signals for mobile-health applications. In the implant WBAN, an implant medical device transmits its measured biologi…
▽ More
Internet of Things (IoT) have motivated a paradigm shift in the development of various applications such as mobile health. Wireless body area network (WBAN) comprises many low-power devices in, on, or around the human body, which offers a desirable solution to monitor physiological signals for mobile-health applications. In the implant WBAN, an implant medical device transmits its measured biological parameters to a target hub with the help of at least one on-body device(s) to satisfy its strict requirements on size, quality of service (QoS, e.g., reliability), and power consumption. In this article, we first review the recent advances of conventional cooperative WBAN. Afterwards, to address the drawbacks of the conventional cooperative WBAN, a QoS-aware buffer-aided relaying framework is proposed for the implant WBAN. In the proposed framework, hierarchical modulations are considered to fulfill the different QoS requirements of different sensor data from an implant medical device. We further conceive some new transmission strategies for the buffer-aided signal-relay and multi-relay implant WBANs. Simulation results show that the proposed cooperative WBAN provides better performance than the conventional cooperative counterparts. Finally, some open research challenges regarding the buffer-aided multi-relay implant WBAN are pointed out to inspire more research activities.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Edge mode based graphene nanomechanical resonators for high-sensitivity mass sensor
Authors:
Guang-Rong Han,
Jin-Wu Jiang
Abstract:
We perform both molecular dynamics simulations and theoretical analysis to study the sensitivity of the graphene nanomechanical resonator based mass sensors, which are actuated following the global extended mode or the localized edge mode. We find that the mass detection sensitivity corresponding to the edge mode is about three times higher than that corresponding to the extended mode. Our analyti…
▽ More
We perform both molecular dynamics simulations and theoretical analysis to study the sensitivity of the graphene nanomechanical resonator based mass sensors, which are actuated following the global extended mode or the localized edge mode. We find that the mass detection sensitivity corresponding to the edge mode is about three times higher than that corresponding to the extended mode. Our analytic derivations reveal that the enhancement of the sensitivity originates in the reduction of the effective mass for the edge mode due to its localizing feature.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
A Deterministic Algorithm for the Capacity of Finite-State Channels
Authors:
Chengyu Wu,
Guangyue Han,
Venkat Anantharam,
Brian Marcus
Abstract:
We propose two modified versions of the classical gradient ascent method to compute the capacity of finite-state channels with Markovian inputs. For the case that the channel mutual information is strongly concave in a parameter taking values in a compact convex subset of some Euclidean space, our first algorithm proves to achieve polynomial accuracy in polynomial time and, moreover, for some spec…
▽ More
We propose two modified versions of the classical gradient ascent method to compute the capacity of finite-state channels with Markovian inputs. For the case that the channel mutual information is strongly concave in a parameter taking values in a compact convex subset of some Euclidean space, our first algorithm proves to achieve polynomial accuracy in polynomial time and, moreover, for some special families of finite-state channels our algorithm can achieve exponential accuracy in polynomial time under some technical conditions. For the case that the channel mutual information may not be strongly concave, our second algorithm proves to be at least locally convergent.
△ Less
Submitted 6 June, 2020; v1 submitted 9 January, 2019;
originally announced January 2019.
-
Electrically Tunable Wafer-Sized Three-Dimensional Topological Insulator Thin Films Grown by Magnetron Sputtering
Authors:
Qixun Guo,
Yu Wu,
Longxiang Xu,
Yan Gong,
Yunbo Ou,
Yang Liu,
Leilei Li,
Jiao Teng,
Yu Yan,
Gang Han,
Dongwei Wang,
Lihua Wang,
Shibing Long,
Bowei Zhang,
Xun Cao,
Shanwu Yang,
Xuemin Wang,
Yizhong Huang,
Tao Liu,
Guanghua Yu,
Ke He
Abstract:
Three-dimensional (3D) topological insulators (TIs) are candidate materials for various electronic and spintronic devices due to their strong spin-orbit coupling and unique surface electronic structure. Rapid, low-cost preparation of large-area TI thin films compatible with conventional semiconductor technology is key to the practical applications of TIs. Here, we show that wafer-sized Bi2Te3 fami…
▽ More
Three-dimensional (3D) topological insulators (TIs) are candidate materials for various electronic and spintronic devices due to their strong spin-orbit coupling and unique surface electronic structure. Rapid, low-cost preparation of large-area TI thin films compatible with conventional semiconductor technology is key to the practical applications of TIs. Here, we show that wafer-sized Bi2Te3 family TI and magnetic TI films with decent quality and well-controlled composition and properties can be prepared on amorphous SiO2/Si substrates by magnetron cosputtering. The SiO2/Si substrates enable us to electrically tune (Bi1-xSbx)2Te3 and Cr-doped (Bi1-xSbx)2Te3 TI films between p-type and n-type behavior and thus study the phenomena associated with topological surface states, such as the quantum anomalous Hall effect (QAHE). This work significantly facilitates the fabrication of TI-based devices for electronic and spintronic applications.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
An analytic investigation for the edge effect on mechanical properties of graphene nanoribbons
Authors:
Guang-Rong Han,
Jia-Sheng Sun,
Jin-Wu Jiang
Abstract:
We derive analytical expressions for the Young's modulus and the Poisson's ratio of the graphene nanoribbon, in which free edges are warped by the compressive edge stress. Our analytical formulas explicitly illustrate the reduction of the Young's modulus by the warped free edges, leading to the obvious width dependence for the Young's modulus of the graphene nanoribbon. The Poisson's ratio is also…
▽ More
We derive analytical expressions for the Young's modulus and the Poisson's ratio of the graphene nanoribbon, in which free edges are warped by the compressive edge stress. Our analytical formulas explicitly illustrate the reduction of the Young's modulus by the warped free edges, leading to the obvious width dependence for the Young's modulus of the graphene nanoribbon. The Poisson's ratio is also reduced by the warped free edges, and negative Poisson's ratio can be achieved in the graphene nanoribbon with an ultra-narrow width. These results are comparable with previous theoretical works.
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
Information-Theoretic Extensions of the Shannon-Nyquist Sampling Theorem
Authors:
Xianming Liu,
Guangyue Han
Abstract:
A continuous-time white Gaussian channel can be formulated using a white Gaussian noise, and a conventional way for examining such a channel is the sampling approach based on the classical Shannon-Nyquist sampling theorem, where the original continuous-time channel is converted to an equivalent discrete-time channel, to which a great variety of established tools and methodology can be applied. How…
▽ More
A continuous-time white Gaussian channel can be formulated using a white Gaussian noise, and a conventional way for examining such a channel is the sampling approach based on the classical Shannon-Nyquist sampling theorem, where the original continuous-time channel is converted to an equivalent discrete-time channel, to which a great variety of established tools and methodology can be applied. However, one of the key issues of this scheme is that continuous-time feedback cannot be incorporated into the channel model. It turns out that this issue can be circumvented by considering the Brownian motion formulation of a continuous-time white Gaussian channel. Nevertheless, as opposed to the white Gaussian noise formulation, a link that establishes the information-theoretic connection between a continuous-time white Gaussian channel under the Brownian motion formulation and its discrete-time counterparts has long been missing. This paper is to fill this gap by establishing information-theoretic extensions of the Shannon-Nyquist theorem, which naturally yield causality-preserving connections between continuous-time Gaussian feedback channels and their associated discrete-time versions in the forms of sampling and approximation theorems. As an example of the possible applications of the extensions, we use the above-mentioned connections to analyze the capacity of a continuous-time white Gaussian feedback channel.
△ Less
Submitted 17 October, 2018;
originally announced October 2018.
-
Structural investigation of the insulator-metal transition in NiS$_{2-x}$Se$_x$ compounds
Authors:
Garam Han,
Sungkyun Choi,
Hwanbeom Cho,
Byungmin Sohn,
Je-Geun Park,
Changyoung Kim
Abstract:
We report on a combined measurement of high-resolution x-ray diffraction on powder and Raman scattering on single crystalline NiS2-xSex samples that exhibit the insulator-metal transition with Se doping. Via x-rays, an abrupt change in the bond length between Ni and S (Se) ions was observed at the transition temperature, in sharp contrast to the almost constant bond length between chalcogen ions.…
▽ More
We report on a combined measurement of high-resolution x-ray diffraction on powder and Raman scattering on single crystalline NiS2-xSex samples that exhibit the insulator-metal transition with Se doping. Via x-rays, an abrupt change in the bond length between Ni and S (Se) ions was observed at the transition temperature, in sharp contrast to the almost constant bond length between chalcogen ions. Raman scattering, a complementary technique with the unique sensitivity to the vibrations of chalcogen bonds, revealed no anomalies in the phonon spectrum, consistent with the x-ray diffraction results. This indicates the important role of the interaction between Ni and S (Se) in the insulator-metal transition. The potential implication of this interpretation is discussed in terms of current theoretical models.
△ Less
Submitted 7 September, 2018;
originally announced September 2018.