Showing 1–7 of 7 results for author: Jacobs, R M

High-rate electron detectors to study Compton scattering in non-perturbative QED

Authors: Antonios Athanassiadis, John Hallford, Louis Helary, Luke Hendriks, Ruth Magdalena Jacobs, Jenny List, Gudrid Moortgat-Pick, Evan Ranken, Stefan Schmitt, Matthew Wing

Abstract: Research in non-perturbative QED in strong-field backgrounds has gained interest in recent years, due to advances in high-intensity laser technologies that make extreme fields accessible in the laboratory. One key signature of strong-field QED is non-linear Compton scattering in collisions between a relativistic electron beam and a high-intensity laser pulse. In the vicinity of strong fields, the… ▽ More Research in non-perturbative QED in strong-field backgrounds has gained interest in recent years, due to advances in high-intensity laser technologies that make extreme fields accessible in the laboratory. One key signature of strong-field QED is non-linear Compton scattering in collisions between a relativistic electron beam and a high-intensity laser pulse. In the vicinity of strong fields, the electron gains a larger effective mass, which leads to a laser-intensity-dependent shift of the kinematic Compton edge and the appearance of higher-order harmonics in the energy spectrum. One of the challenges of measuring the Compton energy spectrum in laser-electron-beam collisions is the enormous flux of outgoing Compton-scattered electrons and photons, ranging from $10^3$ to $10^9$ particles per collision. We present a combined detector system for high-rate Compton electron detection in the context of the planned LUXE experiment, consisting of a spatially segmented gas-filled Cherenkov detector and a scintillator screen imaged by an optical camera system. The detectors are placed in a forward dipole spectrometer to resolve the electron energy spectrum. Finally, we discuss techniques to reconstruct the non-linear Compton electron energy spectrum from the high-rate electron detection system and to extract the features of non-perturbative QED from the spectrum. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Conceptual Design Report for the LUXE Experiment

Authors: Halina Abramowicz, Uwe Hernandez Acosta, Massimo Altarelli, Ralph Assmann, Zhaoyu Bai, Ties Behnke, Yan Benhammou, Thomas Blackburn, Stewart Boogert, Oleksandr Borysov, Maryna Borysova, Reinhard Brinkmann, Marco Bruschi, Florian Burkart, Karsten Büßer, Niall Cavanagh, Oz Davidi, Winfried Decking, Umberto Dosselli, Nina Elkina, Alexander Fedotov, Miroslaw Firlej, Tomasz Fiutowski, Kyle Fleck, Mikhail Gostkin , et al. (66 additional authors not shown)

Abstract: This Conceptual Design Report describes LUXE (Laser Und XFEL Experiment), an experimental campaign that aims to combine the high-quality and high-energy electron beam of the European XFEL with a powerful laser to explore the uncharted terrain of quantum electrodynamics characterised by both high energy and high intensity. We will reach this hitherto inaccessible regime of quantum physics by analys… ▽ More This Conceptual Design Report describes LUXE (Laser Und XFEL Experiment), an experimental campaign that aims to combine the high-quality and high-energy electron beam of the European XFEL with a powerful laser to explore the uncharted terrain of quantum electrodynamics characterised by both high energy and high intensity. We will reach this hitherto inaccessible regime of quantum physics by analysing high-energy electron-photon and photon-photon interactions in the extreme environment provided by an intense laser focus. The physics background and its relevance are presented in the science case which in turn leads to, and justifies, the ensuing plan for all aspects of the experiment: Our choice of experimental parameters allows (i) effective field strengths to be probed at and beyond the Schwinger limit and (ii) a precision to be achieved that permits a detailed comparison of the measured data with calculations. In addition, the high photon flux predicted will enable a sensitive search for new physics beyond the Standard Model. The initial phase of the experiment will employ an existing 40 TW laser, whereas the second phase will utilise an upgraded laser power of 350 TW. All expectations regarding the performance of the experimental set-up as well as the expected physics results are based on detailed numerical simulations throughout. △ Less

Submitted 27 July, 2021; v1 submitted 3 February, 2021; originally announced February 2021.

Report number: DESY 21-016

Multivalent Ion-Activated Protein Adsorption Reflecting Bulk Reentrant Behavior

Authors: Madeleine R. Fries, Daniel Stopper, Michal K. Braun, Alexander Hinderhofer, Fajun Zhang, Robert M. J. Jacobs, Maximilian W. A. Skoda, Hendrik Hansen-Goos, Roland Roth, Frank Schreiber

Abstract: Protein adsorption at the solid-liquid interface is an important phenomenon that often can be observed as a first step in biological processes. Despite its inherent importance, still relatively little is known about the underlying microscopic mechanisms. Here, using multivalent ions, we demonstrate the control of the interactions and the corresponding adsorption of net-negatively charged proteins… ▽ More Protein adsorption at the solid-liquid interface is an important phenomenon that often can be observed as a first step in biological processes. Despite its inherent importance, still relatively little is known about the underlying microscopic mechanisms. Here, using multivalent ions, we demonstrate the control of the interactions and the corresponding adsorption of net-negatively charged proteins (bovine serum albumin) at a solid-liquid interface. This is demonstrated by ellipsometry and corroborated by neutron reflectivity and quartz-crystal microbalance experiments. We show that the reentrant condensation observed within the rich bulk phase behavior of the system featuring a nonmonotonic dependence of the second virial cofficient on salt concentration c_s is reflected in an intriguing way in the protein adsorption d(c_s) at the interface. Our findings are successfully described and understood by a model of ion-activated patchy interactions within the framework of classical density functional theory. In addition to the general challenge of connecting bulk and interface behavior, our work has implications for, inter alia, nucleation at interfaces. △ Less

Submitted 11 October, 2017; originally announced October 2017.

Comments: 5 pages, 3 Figures, accepted by Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 119, 228001 (2017)

Lithium transport through Lithium-ion battery cathode coatings

Authors: Shenzhen Xu, Ryan M. Jacobs, Ha M. Nguyen, Shiqiang Hao, Mahesh Mahanthappa, Chris Wolverton, Dane Morgan

Abstract: The surface coating of cathodes using insulator films has proven to be a promising method for high-voltage cathode stabilization in Li-ion batteries. However, there is still substantial uncertainty about how these films function, specifically with regard to important coating design principles such as lithium solubility and transport through the films. This study uses Density Functional Theory to e… ▽ More The surface coating of cathodes using insulator films has proven to be a promising method for high-voltage cathode stabilization in Li-ion batteries. However, there is still substantial uncertainty about how these films function, specifically with regard to important coating design principles such as lithium solubility and transport through the films. This study uses Density Functional Theory to examine the diffusivity of interstitial lithium in crystalline α-$AlF_3$, α-$Al_2O_3$, m-$ZrO_2$, c-MgO, and α-quartz $SiO_2$, which provide benchmark cases for further understanding of insulator coatings in general. In addition, we propose an Ohmic electrolyte model to predict resistivities and overpotential contributions under battery operating conditions. For the crystalline materials considered we predict that Li+ diffuses quite slowly, with a migration barrier larger than 0.9 eV in all crystalline materials except α-quartz $SiO_2$, which is predicted to have a migration barrier of 0.276 eV along <001>. These results suggest that the stable crystalline forms of these insulator materials, except for oriented α-quartz $SiO_2$, are not practical for conformal cathode coatings. Amorphous $Al_2O_3$ and $AlF_3$ have higher Li+ diffusivities than their crystalline counterparts. Our predicted amorphous $Al_2O_3$ resistivity (1789 MΩm) is near the top of the range of fitted resistivities extracted from previous experiments on nominal $Al_2O_3$ coatings (7.8 to 913 MΩm) while our predicted amorphous $AlF_3$ resistivity (114 MΩm) is close to the middle of the range. These comparisons support our framework for modeling and understanding the impact on overpotential of conformal coatings in terms of their fundamental thermodynamic and kinetic properties, and support that these materials can provide practical conformal coatings in their amorphous form. △ Less

Submitted 7 July, 2016; originally announced July 2016.

Electron Emission Energy Barriers and Stability of $Sc_2O_3$ with Adsorbed Ba and Ba-O

Authors: Ryan M. Jacobs, John H. Booske, Dane Morgan

Abstract: In this study we employ Density Functional Theory (DFT) methods to investigate the surface energy barrier for electron emission (surface barrier) and thermodynamic stability of Ba and Ba-O species adsorption under conditions of high temperature (approximately 1200 K) and low pressure (approximately $10^{-10}$ Torr) on the low index surfaces of bixbyite $Sc_2O_3$. The role of Ba in lowering the cat… ▽ More In this study we employ Density Functional Theory (DFT) methods to investigate the surface energy barrier for electron emission (surface barrier) and thermodynamic stability of Ba and Ba-O species adsorption under conditions of high temperature (approximately 1200 K) and low pressure (approximately $10^{-10}$ Torr) on the low index surfaces of bixbyite $Sc_2O_3$. The role of Ba in lowering the cathode surface barrier is investigated via adsorption of atomic Ba and Ba-O dimers, where the highest simulated dimer coverage corresponds to a single monolayer film of rocksalt BaO. The change of the surface barrier of a semiconductor due to adsorption of surface species is decomposed into two parts: a surface dipole component and doping component. The lowest surface barrier with atomic Ba on $Sc_2O_3$ was found to be 2.12 eV and 2.04 eV for the (011) and (111) surfaces at 3 and 1 Ba atoms per surface unit cell (0.250 and 0.083 Ba per surface O), respectively. The lowest surface barrier for Ba-O on $Sc_2O_3$ was found to be 1.21 eV on (011) for a 7 Ba-O dimer-per-unit-cell coverage (0.583 dimers per surface O). Generally, we found that Ba in its atomic form on $Sc_2O_3$ surfaces is not stable relative to bulk BaO, while Ba-O dimer coverages between 3 to 7 Ba-O dimers per (011) surface unit cell (0.250 to 0.583 dimers per surface O) produce stable structures relative to bulk BaO. Ba-O dimer adsorption on $Sc_2O_3$ (111) surfaces was found to be unstable versus BaO over the full range of coverages studied. Investigation of combined n-type doping and surface dipole modification showed that their effects interact to yield a reduction less than the two contributions would yield separately. △ Less

Submitted 7 July, 2016; originally announced July 2016.

Intrinsic defects and conduction characteristics of $Sc_2O_3$ in thermionic cathode systems

Authors: Ryan M. Jacobs, John H. Booske, Dane Morgan

Abstract: Recent experimental observations indicate that bulk $Sc_2O_3$ (~200 nm thick), an insulator at room temperature and pressure, must act as a good electronic conductor during thermionic cathode operation, leading to the observed high emitted current densities and overall superior emission properties over conventional thermionic emitters which do not contain $Sc_2O_3$. Here, we employ ab initio metho… ▽ More Recent experimental observations indicate that bulk $Sc_2O_3$ (~200 nm thick), an insulator at room temperature and pressure, must act as a good electronic conductor during thermionic cathode operation, leading to the observed high emitted current densities and overall superior emission properties over conventional thermionic emitters which do not contain $Sc_2O_3$. Here, we employ ab initio methods using both semilocal and hybrid functionals to calculate the intrinsic defect energetics of Sc and O vacancies and interstitials and their effects on the electronic properties of $Sc_2O_3$ in an effort to explain the good conduction of $Sc_2O_3$ observed in experiment. The defect energetics were used in an equilibrium defect model to calculate the concentrations of defects and their compensating electron and hole concentrations at equilibrium. Overall, our results indicate that the conductivity of $Sc_2O_3$ solely due to the presence of intrinsic defects in the cathode operating environment is unlikely to be high enough to maintain the magnitude of emitted current densities obtained from experiment, and that presence of impurities are necessary to raise the conductivity of $Sc_2O_3$ to a high enough value to explain the current densities observed in experiment. The necessary minimum impurity concentration to impart sufficient electronic conduction is very small (approximately $7.5x10^{-3}$ ppm) and is probably present in all experiments. △ Less

Submitted 7 July, 2016; originally announced July 2016.

Journal ref: PhysRevB.86.054106 (2012)

Optical Properties of Pentacene and Perfluoropentacene Thin Films

Authors: Alexander Hinderhofer, Ute Heinemeyer, Alexander Gerlach, Stefan Kowarik, Robert M. J. Jacobs, Youichi Sakamoto, Toshiyasu Suzuki, Frank Schreiber

Abstract: The optical properties of pentacene (PEN) and perfluoropentacene(PFP) thin films on various SiO2 substrates were studied using variable angle spectroscopic ellipsometry. Structural characterization was performed using X-ray reflectivity and atomic force microscopy. A uniaxial model with the optic axis normal to the sample surface was used to analyze the ellipsometry data. A Strong optical anisot… ▽ More The optical properties of pentacene (PEN) and perfluoropentacene(PFP) thin films on various SiO2 substrates were studied using variable angle spectroscopic ellipsometry. Structural characterization was performed using X-ray reflectivity and atomic force microscopy. A uniaxial model with the optic axis normal to the sample surface was used to analyze the ellipsometry data. A Strong optical anisotropy was observed and enabled the direction of the transition dipole of the absorption bands to be determined. Furthermore, comparison of the optical constants of PEN and PFP thin films with the absorption spectra of the monomers in solution shows significant changes due to the crystalline environment. Relative to the monomer spectrum the HOMO-LUMO transition observed in PEN (PFP) thin film is reduced by 210 meV (280 meV). Surprisingly, a second absorption band in the PFP thin film shows a slight blueshift (40 meV) compared to the spectrum of the monomer with its transition dipole perpendicular to that of the first absorption band. △ Less

Submitted 25 July, 2007; originally announced July 2007.

Comments: 6 pages, 6 figures, submitted to J. Chem. Phys