-
Hole doping in compositionally complex correlated oxide enables tunable exchange biasing
Authors:
Alessandro R. Mazza,
Elizabeth Skoropata,
Jason Lapano,
Michael A. Chilcote,
Cameron Jorgensen,
Nan Tang,
Zheng Gai,
John Singleton,
Matthew J. Brahlek,
Dustin A. Gilbert,
Thomas Z. Ward
Abstract:
Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design…
▽ More
Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design and control of magnetic response phenomena. In this work, we demonstrate through hole doping of a high entropy perovskite oxide that tuning of magnetic responses can be achieved. With detailed magnetometry, we show magnetic coupling exhibiting a variety of magnetic responses including exchange bias and antiferromagnetic spin reversal in the entropy stabilized ABO3 perovskite oxide La1-xSrx(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 family. We find that manipulation of the A-site charge state can be used to balance magnetic phase compositions and coupling responses. This allows for the creation of highly tunable exchange bias responses. In the low Sr doping regime, a spin frustrated region arising at the antiferromagnetic phase boundary is shown to directly couple to the antiferromagnetic moments of the film and emerges as the dominant mechanism, leading to a vertical shift of magnetization loops in response to field biasing. At higher concentrations, direct coupling of antiferromagnetic and ferromagnetic regions is observed. This tunability of magnetic coupling is discussed within the context of these three competing magnetic phases, revealing critical features in designing exchange bias through exploiting spin frustration and disorder in high entropy oxides.
△ Less
Submitted 28 March, 2023;
originally announced March 2023.
-
Data-driven spatio-temporal modelling of glioblastoma
Authors:
Andreas Christ Sølvsten Jørgensen,
Ciaran Scott Hill,
Marc Sturrock,
Wenhao Tang,
Saketh R. Karamched,
Dunja Gorup,
Mark F. Lythgoe,
Simona Parrinello,
Samuel Marguerat,
Vahid Shahrezaei
Abstract:
Mathematical oncology provides unique and invaluable insights into tumour growth on both the microscopic and macroscopic levels. This review presents state-of-the-art modelling techniques and focuses on their role in understanding glioblastoma, a malignant form of brain cancer. For each approach, we summarise the scope, drawbacks, and assets. We highlight the potential clinical applications of eac…
▽ More
Mathematical oncology provides unique and invaluable insights into tumour growth on both the microscopic and macroscopic levels. This review presents state-of-the-art modelling techniques and focuses on their role in understanding glioblastoma, a malignant form of brain cancer. For each approach, we summarise the scope, drawbacks, and assets. We highlight the potential clinical applications of each modelling technique and discuss the connections between the mathematical models and the molecular and imaging data used to inform them. By doing so, we aim to prime cancer researchers with current and emerging computational tools for understanding tumour progression. Finally, by providing an in-depth picture of the different modelling techniques, we also aim to assist researchers who seek to build and develop their own models and the associated inference frameworks.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Magnetism in Metastable and Annealed Compositionally Complex Alloys
Authors:
Nan Tang,
Lizabeth Quigley,
Walker L. Boldman,
Cameron S. Jorgensen,
Rémi Koch,
Daniel O'Leary,
Hugh R. Meda,
Philip D. Rack,
Dustin A. Gilbert
Abstract:
Compositionally complex materials (CCMs) present a potential paradigm shift in the design of magnetic materials. These alloys exhibit long-range structural order coupled with limited or no chemical order. As a result, extreme local environments exist with a large opposing magnetic energy term, which can manifest large changes in the magnetic behavior. In the current work, the magnetic properties o…
▽ More
Compositionally complex materials (CCMs) present a potential paradigm shift in the design of magnetic materials. These alloys exhibit long-range structural order coupled with limited or no chemical order. As a result, extreme local environments exist with a large opposing magnetic energy term, which can manifest large changes in the magnetic behavior. In the current work, the magnetic properties of (Cr, Mn, Fe, Ni) alloys are presented. These materials were prepared by room-temperature combinatorial sputtering, resulting in a range of compositions with a single BCC structural phase and no chemical ordering. The combinatorial growth technique allows CCMs to be prepared outside of their thermodynamically stable phase, enabling the exploration of otherwise inaccessible order. The mixed ferromagnetic and antiferromagnetic interactions in these alloys causes frustrated magnetic behavior, which results in an extremely low coercivity (<1 mT), which increases rapidly at 50 K. At low temperatures, the coercivity achieves values of nearly 500 mT, which is comparable to some high-anisotropy magnetic materials. Commensurate with the divergent coercivity is an atypical drop in the temperature dependent magnetization. These effects are explained by a mixed magnetic phase model, consisting of ferro-, antiferro , and frustrated magnetic regions, and are rationalized by simulations. A machine-learning algorithm is employed to visualize the parameter space and inform the development of subsequent compositions. Annealing the samples at 600 °C orders the sample, more-than doubling the Curie temperature and increasing the saturation magnetization by as much as 5x. Simultaneously, the large coercivities are suppressed, resulting in magnetic behavior that is largely temperature independent over a range of 350 K.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Prospects for Galactic and stellar astrophysics with asteroseismology of giant stars in the $\it{TESS}$ Continuous Viewing Zones and beyond
Authors:
J. Ted Mackereth,
Andrea Miglio,
Yvonne Elsworth,
Benoit Mosser,
Savita Mathur,
Rafael A. Garcia,
Domenico Nardiello,
Oliver J. Hall,
Mathieu Vrard,
Warrick H. Ball,
Sarbani Basu,
Rachael L. Beaton,
Paul G. Beck,
Maria Bergemann,
Diego Bossini,
Luca Casagrande,
Tiago L. Campante,
William J. Chaplin,
Christina Chiappini,
Léo Girardi,
Andreas Christ Sølvsten Jørgensen,
Saniya Khan,
Josefina Montalbán,
Martin B. Nielsen,
Marc H. Pinsonneault
, et al. (8 additional authors not shown)
Abstract:
The NASA-$\it{TESS}$ mission presents a treasure trove for understanding the stars it observes and the Milky Way, in which they reside. We present a first look at the prospects for Galactic and stellar astrophysics by performing initial asteroseismic analyses of bright ($G < 11$) red giant stars in the $\it{TESS}$ Southern Continuous Viewing Zone (SCVZ). Using three independent pipelines, we detec…
▽ More
The NASA-$\it{TESS}$ mission presents a treasure trove for understanding the stars it observes and the Milky Way, in which they reside. We present a first look at the prospects for Galactic and stellar astrophysics by performing initial asteroseismic analyses of bright ($G < 11$) red giant stars in the $\it{TESS}$ Southern Continuous Viewing Zone (SCVZ). Using three independent pipelines, we detect $ν_{\mathrm{max}}$ and $Δν$ in 41% of the 15,405 star parent sample (6,388 stars), with consistency at a level of $\sim 2\%$ in $ν_{\mathrm{max}}$ and $\sim 5\%$ in $Δν$. Based on this, we predict that seismology will be attainable for $\sim 3\times10^{5}$ giants across the whole sky, subject to improvements in analysis and data reduction techniques. The best quality $\it{TESS}$-CVZ data, for 5,574 stars where pipelines returned consistent results, provide high quality power spectra across a number of stellar evolutionary states. This makes possible studies of, for example, the Asymptotic Giant Branch bump (AGBb). We demonstrate that mixed $\ell=1$ modes and rotational splitting are cleanly observed in the 1-year data set. By combining $\it{TESS}$-CVZ data with $\it{TESS}$-HERMES, $\it{SkyMapper}$, APOGEE and $\it{Gaia}$ we demonstrate the potential for Galactic archaeology studies using the data, which provides good age precision and accuracy that reproduces the age of high $\mathrm{[α/Fe]}$ stars and relationships between mass and kinematics from studies based on $\it{Kepler}$. Better quality astrometry and simpler target selection than the $\it{Kepler}$ sample makes this data ideal for studies of the local star formation history and evolution of the Galactic disc. These results provide a strong case for detailed spectroscopic follow-up in the CVZs to complement that which has been (or will be) collected by current surveys. [Abridged]
△ Less
Submitted 14 December, 2020; v1 submitted 30 November, 2020;
originally announced December 2020.
-
On the impact of the structural surface effect on global stellar properties and asteroseismic analyses
Authors:
Andreas Christ Sølvsten Jørgensen,
Josefina Montalbán,
George C. Angelou,
Andrea Miglio,
Achim Weiss,
Richard Scuflaire,
Arlette Noels,
Jakob Rørsted Mosumgaard,
Víctor Silva Aguirre
Abstract:
In a series of papers, we have recently demonstrated that it is possible to construct stellar structure models that robustly mimic the stratification of multi-dimensional radiative magneto-hydrodynamic simulations at every time-step of the computed evolution. The resulting models offer a more realistic depiction of the near-surface layers of stars with convective envelopes than parameterizations,…
▽ More
In a series of papers, we have recently demonstrated that it is possible to construct stellar structure models that robustly mimic the stratification of multi-dimensional radiative magneto-hydrodynamic simulations at every time-step of the computed evolution. The resulting models offer a more realistic depiction of the near-surface layers of stars with convective envelopes than parameterizations, such as mixing length theory, do. In this paper, we explore how this model improvement impacts on seismic and non-seismic properties of stellar models across the Hertzsprung-Russell diagram. We show that the improved description of the outer boundary layers alters the predicted global stellar properties at different evolutionary stages. In a hare and hound exercise, we show that this plays a key role for asteroseismic analyses, as it, for instance, often shifts the inferred stellar age estimates by more than 10 per cent. Improper boundary conditions may thus introduce systematic errors that exceed the required accuracy of the PLATO space mission. Moreover, we discuss different approximations for how to compute stellar oscillation frequencies. We demonstrate that the so-called gas $Γ_1$ approximation performs reasonably well for all main-sequence stars. Using a Monte Carlo approach, we show that the model frequencies of our hybrid solar models are consistent with observations within the uncertainties of the global solar parameters when using the so-called reduced $Γ_1$ approximation.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Investigating surface correction relations for RGB stars
Authors:
Andreas Christ Sølvsten Jørgensen,
Josefina Montalbán,
Andrea Miglio,
Ben M. Rendle,
Guy R. Davies,
Gaël Buldgen,
Richard Scuflaire,
Arlette Noels,
Patrick Gaulme,
Rafael A. García
Abstract:
State-of-the-art stellar structure and evolution codes fail to adequately describe turbulent convection. For stars with convective envelopes, such as red giants, this leads to an incomplete depiction of the surface layers. As a result, the predicted stellar oscillation frequencies are haunted by systematic errors, the so-called surface effect. Different empirically and theoretically motivated corr…
▽ More
State-of-the-art stellar structure and evolution codes fail to adequately describe turbulent convection. For stars with convective envelopes, such as red giants, this leads to an incomplete depiction of the surface layers. As a result, the predicted stellar oscillation frequencies are haunted by systematic errors, the so-called surface effect. Different empirically and theoretically motivated correction relations have been proposed to deal with this issue. In this paper, we compare the performance of these surface correction relations for red giant branch stars. For this purpose, we apply the different surface correction relations in asteroseismic analyses of eclipsing binaries and open clusters. In accordance with previous studies of main-sequence stars, we find that the use of different surface correction relations biases the derived global stellar properties, including stellar age, mass, and distance estimates. We furthermore demonstrate that the different relations lead to the same systematic errors for two different open clusters. Our results overall discourage from the use of surface correction relations that rely on reference stars to calibrate free parameters. Due to the demonstrated systematic biasing of the results, the use of appropriate surface correction relations is imperative to any asteroseismic analysis of red giants. Accurate mass, age, and distance estimates for red giants are fundamental when addressing questions that deal with the chemo-dynamical evolution of the Milky Way galaxy. In this way, our results also have implications for fields, such as galactic archaeology, that draw on findings from stellar physics.
△ Less
Submitted 6 June, 2020; v1 submitted 28 April, 2020;
originally announced April 2020.
-
Coupling 1D stellar evolution with 3D-hydrodynamical simulations on-the-fly II: Stellar Evolution and Asteroseismic Applications
Authors:
Jakob Rørsted Mosumgaard,
Andreas Christ Sølvsten Jørgensen,
Achim Weiss,
Víctor Silva Aguirre,
Jørgen Christensen-Dalsgaard
Abstract:
Models of stellar structure and evolution are an indispensable tool in astrophysics, yet they are known to incorrectly reproduce the outer convective layers of stars. In the first paper of this series, we presented a novel procedure to include the mean structure of 3D hydrodynamical simulations on-the-fly in stellar models, and found it to significantly improve the outer stratification and oscilla…
▽ More
Models of stellar structure and evolution are an indispensable tool in astrophysics, yet they are known to incorrectly reproduce the outer convective layers of stars. In the first paper of this series, we presented a novel procedure to include the mean structure of 3D hydrodynamical simulations on-the-fly in stellar models, and found it to significantly improve the outer stratification and oscillation frequencies of a standard solar model. In the present work, we extend the analysis of the method; specifically how the transition point between envelope and interior affects the models. We confirm the versatility of our method by successfully repeating the entire procedure for a different grid of 3D hydro-simulations. Furthermore, the applicability of the procedure was investigated across the HR diagram and an accuracy comparable to the solar case was found. Moreover, we explored the implications on stellar evolution and find that the red-giant branch is shifted about 40 K to higher effective temperatures. Finally, we present for the first time an asteroseismic analysis based on stellar models fully utilising the stratification of 3D simulations on-the-fly. These new models significantly reduce the asteroseismic surface term for the two selected stars in the Kepler field. We extend the analysis to red giants and characterise the shape of the surface effect in this regime. Lastly, we stress that the interpolation required by our method would benefit from new 3D simulations, resulting in a finer sampling of the grid.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Bayesian inference of stellar parameters based on 1D stellar models coupled with 3D envelopes
Authors:
Andreas Christ Sølvsten Jørgensen,
George C. Angelou
Abstract:
Stellar models utilising one-dimensional (1D), heuristic theories of convection fail to adequately describe the energy transport in superadiabatic layers. The improper modelling leads to well-known discrepancies between observed and predicted oscillation frequencies for stars with convective envelopes. Recently, three-dimensional (3D) hydrodynamic simulations of stellar envelopes have been shown t…
▽ More
Stellar models utilising one-dimensional (1D), heuristic theories of convection fail to adequately describe the energy transport in superadiabatic layers. The improper modelling leads to well-known discrepancies between observed and predicted oscillation frequencies for stars with convective envelopes. Recently, three-dimensional (3D) hydrodynamic simulations of stellar envelopes have been shown to facilitate a realistic depiction of superadiabatic convection in 1D stellar models. The resulting structural changes of the boundary layers have been demonstrated to impact not only the predicted oscillation spectra but evolution tracks as well. In this paper, we quantify the consequences that the change in boundary conditions has for stellar parameter estimates of main-sequence stars. For this purpose, we investigate two benchmark stars, Alpha Centauri A and B, using Bayesian inference. We show that the improved treatment of turbulent convection makes the obtained 1D stellar structures nearly insensitive to the mixing length parameter. By using 3D simulations in 1D stellar models, we hence overcome the degeneracy between the mixing length parameter and other stellar parameters. By lifting this degeneracy, the inclusion of 3D simulations has the potential to yield more robust parameter estimates. In this way, a more realistic depiction of superadiabatic convection has important implications for any field that relies on stellar models, including the study of the chemical evolution of the Milky Way Galaxy and exoplanet research.
△ Less
Submitted 22 October, 2019; v1 submitted 9 October, 2019;
originally announced October 2019.
-
Overcoming the structural surface effect with a realistic treatment of turbulent convection in 1D stellar models
Authors:
Andreas Christ Sølvsten Jørgensen,
Achim Weiss
Abstract:
State-of-the-art one-dimensional (1D) stellar evolution codes rely on simplifying assumptions, such as mixing length theory, in order to describe superadiabatic convection. As a result, 1D stellar structure models do not correctly recover the surface layers of the Sun and other stars with convective envelopes. We present a method that overcomes this structural drawback by employing three-dimension…
▽ More
State-of-the-art one-dimensional (1D) stellar evolution codes rely on simplifying assumptions, such as mixing length theory, in order to describe superadiabatic convection. As a result, 1D stellar structure models do not correctly recover the surface layers of the Sun and other stars with convective envelopes. We present a method that overcomes this structural drawback by employing three-dimensional (3D) hydrodynamic simulations of stellar envelopes: at every time-step of the evolution interpolated 3D envelopes are appended to the 1D structure and are used to supply realistic boundary conditions for the stellar interior. In contrast to previous attempts, our method includes mean 3D turbulent pressure. We apply our method to model the present Sun. The structural shortcomings of standard stellar models lead to systematic errors in the stellar oscillation frequencies inferred from the model. We show that our method fully corrects for this error. Furthermore, we show that our realistic treatment of superadiabatic convection alters the predicted evolution of the Sun. Our results hence have important implications for the characterization of stars. This has ramifications for neighbouring fields, such as exoplanet research and galactic archaeology, for which accurate stellar models play a key role.
△ Less
Submitted 13 July, 2019;
originally announced July 2019.
-
Christian Horrebow's Sunspot Observations -- II. Construction of a Record of Sunspot Positions
Authors:
Christoffer Karoff,
Carsten Sønderskov Jørgensen,
V. Senthamizh Pavai,
Rainer Arlt
Abstract:
The number of spots on the surface of the Sun is one of the best tracers of solar variability we have. The sunspot number is not only known to change in phase with the 11-year solar cycles, but also to show variability on longer time scales. It is, however, not only the sunspot number that changes in connection with solar variability. The location of the spots on the solar surface is also known to…
▽ More
The number of spots on the surface of the Sun is one of the best tracers of solar variability we have. The sunspot number is not only known to change in phase with the 11-year solar cycles, but also to show variability on longer time scales. It is, however, not only the sunspot number that changes in connection with solar variability. The location of the spots on the solar surface is also known to change in phase with the 11-year solar cycle. This has traditionally been visualised in the so-called butterfly diagram, but this is only well constrained from the beginning of the 19th century. This is unfortunate, as knowledge about the butterfly diagram could aid our understanding of the variability and the Sun-Earth connection. As part of a larger review of the work done on sunspots by the Danish astronomer Christian Horrebow, we here present a reanalysis of Christian Horrebow's notebooks covering the years 1761 and 1764 - 1777. These notebooks have been analysed in at least three earlier studies by Thiele (Astron. Nachr. 50, 257, 1859), d'Arrest (published in Wolf, Astron. Mitt. Eidgenoss. Sternwarte Zur. 4, 77, 1873) and Hoyt and Schatten (Solar Phys. 160, 387, 1995). In this article, we construct a complete record of sunspot positions covering the years 1761 and 1764 - 1777. The resulting butterfly diagram shows the characteristic structure known from observations in the 19th and 20th century. We do see some indications of equatorial sunspots in the observations we have from Cycle 1. However, in Cycle 2, which has much better coverage, we do not see such indications.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Christian Horrebow's Sunspot Observations -- I. Life and Published Writings
Authors:
Carsten Sønderskov Jørgensen,
Christoffer Karoff,
V. Senthamizh Pavai,
Rainer Arlt
Abstract:
Between 1761 and 1776, Christian Horrebow made regular observations of sunspots from Rundetaarn in Copenhagen. Based on these observations he writes in 1775 that "it appears that after the course of a certain number of years, the appearance of the Sun repeats itself with respect to the number and size of the spots". Thus, Horrebow hypothesized the idea of a cyclic Sun several decades before Heinri…
▽ More
Between 1761 and 1776, Christian Horrebow made regular observations of sunspots from Rundetaarn in Copenhagen. Based on these observations he writes in 1775 that "it appears that after the course of a certain number of years, the appearance of the Sun repeats itself with respect to the number and size of the spots". Thus, Horrebow hypothesized the idea of a cyclic Sun several decades before Heinrich Schwabe discovered the solar cycle and estimated its period. This proves the ability of Horrebow as a sunspot observer. In this article, we present a general overview of the work of Christian Horrebow, including a brief biography and a complete bibliography. We also present a translation from Danish to English of his writings on sunspots in the Dansk Historisk Almanak. These writings include tables of daily sunspot measurements of which we discuss the completeness.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Mending the structural surface effect of 1D stellar structure models with non-solar metallicities based on interpolated 3D envelopes
Authors:
Andreas Christ Sølvsten Jørgensen,
Achim Weiss,
George Angelou,
Víctor Silva Aguirre
Abstract:
1D stellar evolution codes employ rudimentary treatments of turbulent convection. For stars with convective envelopes, this leads to systematic errors in the predicted oscillation frequencies needed for asteroseismology. One way of mending these structural inadequacies is through patching, whereby the outermost layers of 1D models are replaced by the mean stratifications from 3D simulations. In or…
▽ More
1D stellar evolution codes employ rudimentary treatments of turbulent convection. For stars with convective envelopes, this leads to systematic errors in the predicted oscillation frequencies needed for asteroseismology. One way of mending these structural inadequacies is through patching, whereby the outermost layers of 1D models are replaced by the mean stratifications from 3D simulations. In order to viably implement this approach in asteroseismic analysis, interpolation throughout precomputed 3D envelopes is required. We present a method that interpolates throughout precomputed 3D envelopes as a function of effective temperature, surface gravity, and metallicity. We conduct a series of validation tests that demonstrate that the scheme reliably and accurately reproduces the structures of stellar envelopes and apply our method to the Sun as well as two stars observed by Kepler. We parameterize the frequency shift that results from patching and show that the functional forms are evolutionary dependent. In addition we find that neglecting modal effects, such as non-adiabatic energetics, introduces systematic errors in asteroseimically obtained stellar parameters. Both these results suggest that a cautious approach is necessary when utilizing empirical surface corrections in lieu of patching models. Our results have important implications, particularly for characterizing exoplanet systems, where accuracy is of utmost concern.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Addressing the acoustic tachocline anomaly and the lithium depletion problem at the same time
Authors:
Andreas Christ Sølvsten Jørgensen,
Achim Weiss
Abstract:
Current standard solar models neither account properly for the photospheric lithium abundance nor reproduce the inferred solar sound speed profile. Diffusive overshooting at the base of the solar convective envelope has previously been shown to solve either of these model inadequacies. In this paper, we present an analysis of solar models with four different parametrizations of diffusive overshoot…
▽ More
Current standard solar models neither account properly for the photospheric lithium abundance nor reproduce the inferred solar sound speed profile. Diffusive overshooting at the base of the solar convective envelope has previously been shown to solve either of these model inadequacies. In this paper, we present an analysis of solar models with four different parametrizations of diffusive overshooting. We find that these models are able to recover the correct lithium depletion, regardless of the parametrization, if overshooting is suppressed, during the early evolutionary stages. Further, parametrizations of diffusive overshooting have been shown to improve the inferred sound speed profile. However, none of the presented models are able to simultaneously solve both model inadequacies, showing that diffusive overshooting on its own is deficient to account for observations.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
A Semi-Analytical Computation of the Theoretical Uncertainties of the Solar Neutrino Flux
Authors:
Andreas Christ Sølvsten Jørgensen,
Jørgen Christensen-Dalsgaard
Abstract:
We present a comparison between Monte Carlo simulations and a semi-analytical approach that reproduces the theoretical probability distribution functions of the solar neutrino fluxes, stemming from the $pp$, $pep$, $hep$, $^7\mathrm{Be}$, $^8\mathrm{B}$, $^{13}\mathrm{N}$, $^{15}\mathrm{O}$, and $^{17}\mathrm{F}$ source reactions. We obtain good agreement between the two approaches. Thus, the semi…
▽ More
We present a comparison between Monte Carlo simulations and a semi-analytical approach that reproduces the theoretical probability distribution functions of the solar neutrino fluxes, stemming from the $pp$, $pep$, $hep$, $^7\mathrm{Be}$, $^8\mathrm{B}$, $^{13}\mathrm{N}$, $^{15}\mathrm{O}$, and $^{17}\mathrm{F}$ source reactions. We obtain good agreement between the two approaches. Thus, the semi-analytical method yields confidence intervals that closely match those found, based on Monte Carlo simulations, and points towards the same general symmetries of the investigated probability distribution functions. Furthermore, the negligible computational cost of this method is a clear advantage over Monte Carlo simulations, making it trivial to take new observational constraints on the input parameters into account.
△ Less
Submitted 28 August, 2018;
originally announced August 2018.
-
Coupling 1D stellar evolution with 3D-hydrodynamical simulations on-the-fly I: A New Standard Solar Model
Authors:
Andreas Christ Sølvsten Jørgensen,
Jakob Rørsted Mosumgaard,
Achim Weiss,
Víctor Silva Aguirre,
Jørgen Christensen-Dalsgaard
Abstract:
Standard 1D stellar evolution models do not correctly reproduce the structure of the outermost layers of stars with convective envelopes. This has been a long-standing problem in stellar modelling affecting both the predicted evolutionary paths and the attributed oscillation frequencies, and indirectly biasing numerous quantities derived from stellar evolution calculations. We present a novel meth…
▽ More
Standard 1D stellar evolution models do not correctly reproduce the structure of the outermost layers of stars with convective envelopes. This has been a long-standing problem in stellar modelling affecting both the predicted evolutionary paths and the attributed oscillation frequencies, and indirectly biasing numerous quantities derived from stellar evolution calculations. We present a novel method that mostly eliminates these structural defects by appending mean 3D simulations of stellar envelopes. In contrast to previous attempts we impose the complete structure derived from 3D simulations at each time step during the entire evolution. For this purpose, we interpolate in grids of pre-computed 3D simulations and use the resulting structure as boundary conditions, in order to solve the stellar structure equations for the 1D interior at each time step. Our method provides a continuous transition in many quantities from the interior to the imposed interpolated 3D surface layers. We present a solar calibration model and show that the obtained structure of the surface layers reliably mimics that of the underlying 3D simulations for the present Sun. Moreover, we perform a helioseismic analysis, showing that our method mostly eliminates the structural contribution to the discrepancy between model frequencies and observed p-mode frequencies.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
Science with e-ASTROGAM (A space mission for MeV-GeV gamma-ray astrophysics)
Authors:
A. De Angelis,
V. Tatischeff,
I. A. Grenier,
J. McEnery,
M. Mallamaci,
M. Tavani,
U. Oberlack,
L. Hanlon,
R. Walter,
A. Argan,
P. Von Ballmoos,
A. Bulgarelli,
A. Bykov,
M. Hernanz,
G. Kanbach,
I. Kuvvetli,
M. Pearce,
A. Zdziarski,
J. Conrad,
G. Ghisellini,
A. Harding,
J. Isern,
M. Leising,
F. Longo,
G. Madejski
, et al. (226 additional authors not shown)
Abstract:
e-ASTROGAM (enhanced ASTROGAM) is a breakthrough Observatory space mission, with a detector composed by a Silicon tracker, a calorimeter, and an anticoincidence system, dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV - the lower energy limit can be pushed to energies as low as 150 keV for the tracker, and to 30 keV for calorimetric detection. The…
▽ More
e-ASTROGAM (enhanced ASTROGAM) is a breakthrough Observatory space mission, with a detector composed by a Silicon tracker, a calorimeter, and an anticoincidence system, dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV - the lower energy limit can be pushed to energies as low as 150 keV for the tracker, and to 30 keV for calorimetric detection. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with polarimetric capability. Thanks to its performance in the MeV-GeV domain, substantially improving its predecessors, e-ASTROGAM will open a new window on the non-thermal Universe, making pioneering observations of the most powerful Galactic and extragalactic sources, elucidating the nature of their relativistic outflows and their effects on the surroundings. With a line sensitivity in the MeV energy range one to two orders of magnitude better than previous generation instruments, e-ASTROGAM will determine the origin of key isotopes fundamental for the understanding of supernova explosion and the chemical evolution of our Galaxy. The mission will provide unique data of significant interest to a broad astronomical community, complementary to powerful observatories such as LIGO-Virgo-GEO600-KAGRA, SKA, ALMA, E-ELT, TMT, LSST, JWST, Athena, CTA, IceCube, KM3NeT, and LISA.
△ Less
Submitted 8 August, 2018; v1 submitted 3 November, 2017;
originally announced November 2017.
-
Theoretical oscillation frequencies for solar-type dwarfs from stellar models with $\langle 3\mathrm{D} \rangle$-atmospheres
Authors:
Andreas Christ Sølvsten Jørgensen,
Achim Weiss,
Jakob Rørsted Mosumgaard,
Victor Silva Aguirre,
Christian Lundsgaard Sahlholdt
Abstract:
We present a new method for replacing the outermost layers of stellar models with interpolated atmospheres based on results from 3D simulations, in order to correct for structural inadequacies of these layers. This replacement is known as patching. Tests, based on 3D atmospheres from three different codes and interior models with different input physics, are performed. Using solar models, we inves…
▽ More
We present a new method for replacing the outermost layers of stellar models with interpolated atmospheres based on results from 3D simulations, in order to correct for structural inadequacies of these layers. This replacement is known as patching. Tests, based on 3D atmospheres from three different codes and interior models with different input physics, are performed. Using solar models, we investigate how different patching criteria affect the eigenfrequencies. These criteria include the depth, at which the replacement is performed, the quantity, on which the replacement is based, and the mismatch in $T_\mathrm{eff}$ and $\log g$ between the un-patched model and patched 3D atmosphere. We find the eigenfrequencies to be unaltered by the patching depth deep within the adiabatic region, while changing the patching quantity or the employed atmosphere grid leads to frequency shifts that may exceed $1\,μ\mathrm{Hz}$. Likewise, the eigenfrequencies are sensitive to mismatches in $T_\mathrm{eff}$ or $\log g$. A thorough investigation of the accuracy of a new scheme, for interpolating mean 3D stratifications within the atmosphere grids, is furthermore performed. Throughout large parts of the atmosphere grids, our interpolation scheme yields sufficiently accurate results for the purpose of asteroseismology. We apply our procedure in asteroseismic analyses of four \textit{Kepler} stars and draw the same conclusions as in the solar case: Correcting for structural deficiencies lowers the eigenfrequencies, this correction is slightly sensitive to the patching criteria, and the remaining frequency discrepancy between models and observations is less frequency-dependent. Our work shows the applicability and relevance of patching in asteroseismology.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.
-
Ground-based near-UV observations of 15 transiting exoplanets: Constraints on their atmospheres and no evidence for asymmetrical transits
Authors:
Jake D. Turner,
Kyle A. Pearson,
Lauren I. Biddle,
Brianna M. Smart,
Robert T. Zellem,
Johanna K. Teske,
Kevin K. Hardegree-Ullman,
Caitlin C. Griffith,
Robin M. Leiter,
Ian T. Cates,
Megan N. Nieberding,
Carter-Thaxton W. Smith,
Robert M. Thompson,
Ryan Hofmann,
Michael P. Berube,
Chi H. Nguyen,
Lindsay C. Small,
Blythe C. Guvenen,
Logan Richardson,
Allison McGraw,
Brandon Raphael,
Benjamin E. Crawford,
Amy N. Robertson,
Ryan Tombleson,
Timothy M. Carleton
, et al. (15 additional authors not shown)
Abstract:
Transits of exoplanets observed in the near-UV have been used to study the scattering properties of their atmospheres and possible star-planet interactions. We observed the primary transits of 15 exoplanets (CoRoT-1b, GJ436b, HAT-P-1b, HAT-P-13b, HAT-P-16b, HAT-P-22b, TrES-2b, TrES-4b, WASP-1b, WASP-12b, WASP-33b, WASP-36b, WASP-44b, WASP-48b, and WASP-77Ab) in the near-UV and several optical phot…
▽ More
Transits of exoplanets observed in the near-UV have been used to study the scattering properties of their atmospheres and possible star-planet interactions. We observed the primary transits of 15 exoplanets (CoRoT-1b, GJ436b, HAT-P-1b, HAT-P-13b, HAT-P-16b, HAT-P-22b, TrES-2b, TrES-4b, WASP-1b, WASP-12b, WASP-33b, WASP-36b, WASP-44b, WASP-48b, and WASP-77Ab) in the near-UV and several optical photometric bands to update their planetary parameters, ephemerides, search for a wavelength dependence in their transit depths to constrain their atmospheres, and determine if asymmetries are visible in their light curves. Here we present the first ground-based near-UV light curves for 12 of the targets (CoRoT-1b, GJ436b, HAT-P-1b, HAT-P-13b, HAT-P-22b, TrES-2b, TrES-4b, WASP-1b, WASP-33b, WASP-36b, WASP-48b, and WASP-77Ab). We find that none of the near-UV transits exhibit any non-spherical asymmetries, this result is consistent with recent theoretical predictions by Ben-Jaffel et al. and Turner et al. The multi-wavelength photometry indicates a constant transit depth from near-UV to optical wavelengths in 10 targets (suggestive of clouds), and a varying transit depth with wavelength in 5 targets (hinting at Rayleigh or aerosol scattering in their atmospheres). We also present the first detection of a smaller near-UV transit depth than that measured in the optical in WASP-1b and a possible opacity source that can cause such radius variations is currently unknown. WASP-36b also exhibits a smaller near-UV transit depth at 2.6$σ$. Further observations are encouraged to confirm the transit depth variations seen in this study.
△ Less
Submitted 8 March, 2016;
originally announced March 2016.
-
Rapidity and centrality dependence of particle production for identified hadrons in Cu+Cu collisions at $\sqrt{s_{NN}} = 200$ GeV
Authors:
BRAHMS Collaboration,
I. C. Arsene,
I. G. Bearden,
D. Beavis,
S. Bekele,
C. Besliu,
B. Budick,
H. Bøggild,
C. Chasman,
C. H. Christensen,
P. Christiansen,
H. H. Dalsgaard,
R. Debbe,
J. J. Gaardhøje,
K. Hagel,
H. Ito,
A. Jipa,
E. B. Johnson,
C. E. Jørgensen,
R. Karabowicz,
N. Katrynska,
E. J. Kim,
T. M. Larsen,
J. H. Lee,
G. Løvhøiden
, et al. (19 additional authors not shown)
Abstract:
The BRAHMS collaboration has measured transverse momentum spectra of pions, kaons, protons and antiprotons at rapidities 0 and 3 for Cu+Cu collisions at $\sqrt{s_{NN}} = 200$ GeV. As the collisions become more central the collective radial flow increases while the temperature of kinetic freeze-out decreases. The temperature is lower and the radial flow weaker at forward rapidity. Pion and kaon yie…
▽ More
The BRAHMS collaboration has measured transverse momentum spectra of pions, kaons, protons and antiprotons at rapidities 0 and 3 for Cu+Cu collisions at $\sqrt{s_{NN}} = 200$ GeV. As the collisions become more central the collective radial flow increases while the temperature of kinetic freeze-out decreases. The temperature is lower and the radial flow weaker at forward rapidity. Pion and kaon yields with transverse momenta between 1.5 and 2.5 GeV/c are suppressed for central collisions relative to scaled $p+p$ collisions. This suppression, which increases as the collisions become more central is consistent with jet quenching models and is also present with comparable magnitude at forward rapidity. At such rapidities initial state effects may also be present and persistence of the meson suppression to high rapidity may reflect a combination of jet quenching and nuclear shadowing. The ratio of protons to mesons increases as the collisions become more central and is largest at forward rapidities.
△ Less
Submitted 2 February, 2016;
originally announced February 2016.
-
A Visual Formalism for Interacting Systems
Authors:
Paul C. Jorgensen
Abstract:
Interacting systems are increasingly common. Many examples pervade our everyday lives: automobiles, aircraft, defense systems, telephone switching systems, financial systems, national governments, and so on. Closer to computer science, embedded systems and Systems of Systems are further examples of interacting systems. Common to all of these is that some "whole" is made up of constituent parts, an…
▽ More
Interacting systems are increasingly common. Many examples pervade our everyday lives: automobiles, aircraft, defense systems, telephone switching systems, financial systems, national governments, and so on. Closer to computer science, embedded systems and Systems of Systems are further examples of interacting systems. Common to all of these is that some "whole" is made up of constituent parts, and these parts interact with each other. By design, these interactions are intentional, but it is the unintended interactions that are problematic. The Systems of Systems literature uses the terms "constituent systems" and "constituents" to refer to systems that interact with each other. That practice is followed here. This paper presents a visual formalism, Swim Lane Event-Driven Petri Nets, that is proposed as a basis for Model-Based Testing (MBT) of interacting systems. In the absence of available tools, this model can only support the offline form of Model-Based Testing.
△ Less
Submitted 9 April, 2015;
originally announced April 2015.
-
Rapidity dependence of deuteron production in Au+Au collisions at $\sqrt{s_{NN}}$ = 200 GeV
Authors:
BRAHMS Collaboration,
I. Arsene,
I. G. Bearden,
D. Beavis,
S. Bekele,
C. Besliu,
B. Budick,
H. Bøggild,
C. Chasman,
C. H. Christensen,
P. Christensen,
H. H. Dalsgaard,
R. Debbe,
J. J. Gaardhøje,
C. E. Jørgensen,
K. Hagel,
H. Ito,
A. Jipa,
E. B. Johnson,
R. Karabowicz,
N. Katrynska,
E. J. Kim,
T. M. Larsen,
J. H. Lee,
G. Løvhøiden
, et al. (20 additional authors not shown)
Abstract:
We have measured the distributions of protons and deuterons produced in high energy heavy ion Au+Au collisions at RHIC over a very wide range of transverse and longitudinal momentum. Near mid-rapidity we have also measured the distribution of anti-protons and anti-deuterons. We present our results in the context of coalescence models. In particular we extract the "volume of homogeneity" and the av…
▽ More
We have measured the distributions of protons and deuterons produced in high energy heavy ion Au+Au collisions at RHIC over a very wide range of transverse and longitudinal momentum. Near mid-rapidity we have also measured the distribution of anti-protons and anti-deuterons. We present our results in the context of coalescence models. In particular we extract the "volume of homogeneity" and the average phase-space density for protons and anti-protons. Near central rapidity the coalescence parameter $B_2(p_T)$ and the space averaged phase-space density $<f> (p_T)$ are very similar for both protons and anti-protons. For protons we see little variation of either $B_2(p_T)$ or the space averaged phase-space density as the rapidity increases from 0 to 3. However both these quantities depend strongly on $p_T$ at all rapidities. These results are in contrast to lower energy data where the proton and anti-proton phase-space densities are different at $y$=0 and both $B_2$ and $f$ depend strongly on rapidity.
△ Less
Submitted 4 April, 2011; v1 submitted 29 May, 2010;
originally announced May 2010.
-
The BRAHMS ring imaging Cherenkov detector
Authors:
R. Debbe,
C. E. Jorgensen,
J. Olness,
Z. Yin
Abstract:
A Ring Imaging Čerenkov detector built for the BRAHMS experiment at the Brookhaven RHIC is described. This detector has a high index of refraction gas radiator. Čerenkov light is focused on a photo-multiplier based photon detector with a large spherical mirror. The combination of momentum and ring radius measurement provides particle identification from 2.5 GeV/c up to 35 GeV/c for pions and kao…
▽ More
A Ring Imaging Čerenkov detector built for the BRAHMS experiment at the Brookhaven RHIC is described. This detector has a high index of refraction gas radiator. Čerenkov light is focused on a photo-multiplier based photon detector with a large spherical mirror. The combination of momentum and ring radius measurement provides particle identification from 2.5 GeV/c up to 35 GeV/c for pions and kaons and well above 40 GeV/c for protons during runs that had the radiator index of refraction set at $n-1=1700 \times 10^{-6}$.
△ Less
Submitted 24 January, 2007;
originally announced January 2007.
-
Rapidity dependence of high p_T suppression at sqrt{s_{NN}}=62.4{GeV}
Authors:
I. Arsene,
I. G. Bearden,
D. Beavis,
C. Besliu,
B. Budick,
H. Bøggild,
C. Chasman,
C. H. Christensen,
P. Christiansen,
J. Cibor,
R. Debbe,
E. Enger,
J. J. Gaardhøje,
K. Hagel,
H. Ito,
A. Jipa,
F. Jundt,
E. B. Johnson,
J. I. Jørdre,
C. E. Jørgensen,
R. Karabowicz,
E. J. Kim,
T. Kozik,
T. M. Larsen,
J. H. Lee
, et al. (27 additional authors not shown)
Abstract:
We present measurements of charged hadron p_T spectra from Au+Au collisions at sqrt(snn)=62.4 GeV for pseudorapidities eta=0, eta=1 and eta=3.2. Around midrapidity (eta=0, eta=1) we find nuclear modification factors at levels suggesting a smaller degree of high p_T suppression than in the same reaction at higher energy sqrt(snn)=200 GeV. At the high pseudorapidity, eta=3.2, where nuclear modific…
▽ More
We present measurements of charged hadron p_T spectra from Au+Au collisions at sqrt(snn)=62.4 GeV for pseudorapidities eta=0, eta=1 and eta=3.2. Around midrapidity (eta=0, eta=1) we find nuclear modification factors at levels suggesting a smaller degree of high p_T suppression than in the same reaction at higher energy sqrt(snn)=200 GeV. At the high pseudorapidity, eta=3.2, where nuclear modification factors cannot be constructed due to the lack of p+p reference data, we find a significant reduction of R_{CP} (central to peripheral ratio) as compared to midrapidity.
△ Less
Submitted 17 February, 2006;
originally announced February 2006.