-
Stability and retention force factor for binary-nanofluid sessile droplets on a inclined substrate
Authors:
Pallavi Katre,
Sayak Banerjee,
Saravanan Balusamy,
Kirti Chandra Sahu
Abstract:
We investigate the retention force factor of sessile droplets of pure (ethanol) and binary (water-ethanol) fluids laden with alumina nanoparticles placed on a critically inclined substrate. It is observed that while the critical angle of an ethanol droplet increases with an increase in nanoparticles concentration, for water-ethanol binary droplets, it reaches to plateau and decreases slightly afte…
▽ More
We investigate the retention force factor of sessile droplets of pure (ethanol) and binary (water-ethanol) fluids laden with alumina nanoparticles placed on a critically inclined substrate. It is observed that while the critical angle of an ethanol droplet increases with an increase in nanoparticles concentration, for water-ethanol binary droplets, it reaches to plateau and decreases slightly after 0.6 wt.\% nanoparticle loading. The effect of composition and concentration of nanoparticles on the retention force factor is studied, and correlations are proposed for the retention force factor and critical angle for pure and binary droplets. Infrared images of evaporating droplets of pure and binary fluids reveal richer hydrothermal waves in droplets with nanoparticles loading than in droplets without loading, and these waves are more intense in pure ethanol droplets. On an inclined substrate, the body force caused the droplets to elongate more toward the receding side, which led to an earlier breakup of the droplet at the receding side. To the best of our knowledge, our study is a first attempt to investigate the retention force factor for the droplets loaded with nanoparticles on an inclined substrate.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
Counter-intuitive evaporation in nanofluids droplets due to stick-slip nature
Authors:
Hari Govindha A.,
Pallavi Katre,
Saravanan Balusamy,
Sayak Banerjee,
Kirti Chandra Sahu
Abstract:
We experimentally investigate the evaporation characteristics of a sessile ethanol droplet containing Al$_2$O$_3$ and Cu nanoparticles of sizes 25 nm and 75 nm on a heated substrate using shadowgraphy and infrared imaging techniques. Our results demonstrate that the droplet contact line dynamics resulting from the presence of various nanoparticles plays a dominant role in the evaporation process.…
▽ More
We experimentally investigate the evaporation characteristics of a sessile ethanol droplet containing Al$_2$O$_3$ and Cu nanoparticles of sizes 25 nm and 75 nm on a heated substrate using shadowgraphy and infrared imaging techniques. Our results demonstrate that the droplet contact line dynamics resulting from the presence of various nanoparticles plays a dominant role in the evaporation process. This is in contrast to the widely-held assumption that the enhanced evaporation rate observed in sessile nanofluid droplets is due to the higher thermal conductivity of the added nanoparticles. We observe that even though the thermal conductivity of Al$_2$O$_3$ is an order of magnitude lower than that of Cu, droplets containing 25 nm-sized Al$_2$O$_3$ exhibit pinned contact line dynamics and evaporate much more rapidly than droplets containing Cu nanoparticles of both sizes and 75 nm Al$_2$O$_3$ nanoparticles that exhibit stick-slip behaviour. We also found that the droplets with different nanoparticles display distinct thermal patterns due to the difference in contact line behaviour, which alters the heat transfer inside the droplets. We establish this counter-intuitive observation by analysing the temporal variations of the perimeter, free surface area, and deposition patterns on the substrate.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Evaporation of sessile ethanol-water droplets on a highly inclined heated surface
Authors:
Pallavi Katre,
Pradeep Gurrala,
Saravanan Balusam,
Sayak Banerjee,
Kirti Chandra Sahu
Abstract:
The evaporation of a binary sessile ethanol-water droplet on an inclined substrate is studied experimentally just below the critical sliding angles for different substrate temperatures. A customized goniometer equipped with a CMOS camera and an infrared (IR) camera is used. The droplet is observed to remain pinned in the advancing side during the evaporation process, while the receding side contra…
▽ More
The evaporation of a binary sessile ethanol-water droplet on an inclined substrate is studied experimentally just below the critical sliding angles for different substrate temperatures. A customized goniometer equipped with a CMOS camera and an infrared (IR) camera is used. The droplet is observed to remain pinned in the advancing side during the evaporation process, while the receding side contracts. The asymmetry in the advancing and receding contact angles of the droplet on inclined substrate results in complex thermo-solutal Marangoni convection that is captured through IR images. The droplet exhibits two distinct oscillatory water-rich cold regions around the advancing contact line during the early stage of evaporation, while the more volatile and lighter ethanol creates a hotter and rapidly evaporating cell near the receding side. As ethanol evaporates away, the ethanol rich cells collapse producing thermal pulsations along the incline. Subsequently, the thermal patterns become similar to that of the pure-water droplet. It is also observed that the thermo-solutal driven oscillatory convection increases with increasing substrate temperature. Despite the complexity in convection dynamics, the evaporation rate exhibits a universal behavior in the normalized time at different substrate temperatures which can be represented by piecewise linear fits at the early and late stages of evaporation.
△ Less
Submitted 21 March, 2020;
originally announced March 2020.
-
Evaporation of ethanol-water droplet at different substrate temperatures and compositions
Authors:
Pradeep Gurrala,
Pallavi Katre,
Saravanan Balusamy,
Sayak Banerjee,
Kirti Chandra Sahu
Abstract:
We experimentally investigate the evaporation dynamics of sessile droplets of a fixed volume consisting of different compositions of ethanol-water binary mixture at different substrate temperatures (T_s). At T_s=25oC, we observe pinned-stage linear evaporation for pure droplets, but a binary droplet undergoes two distinct evaporation stages: an early pinned stage and a later receding stage. In the…
▽ More
We experimentally investigate the evaporation dynamics of sessile droplets of a fixed volume consisting of different compositions of ethanol-water binary mixture at different substrate temperatures (T_s). At T_s=25oC, we observe pinned-stage linear evaporation for pure droplets, but a binary droplet undergoes two distinct evaporation stages: an early pinned stage and a later receding stage. In the binary droplet, the more volatile ethanol, evaporates faster leading to a nonlinear trend in the evaporation process at the early stage. The phenomenon observed in the present study at T_s=25oC is similar to that presented by previous researchers at room temperature. More interesting dynamics is observed in the evaporation process of a binary droplet at an elevated substrate temperature. We found that the lifetime of the droplet exhibits a non-monotonic trend with the increase in ethanol concentration in the binary mixture, which {can be attributed to} the non-ideal behaviour of water-ethanol binary mixtures. Increasing T_s decreases the lifetime of the (50\% ethanol + 50 \% water) binary droplet in a logarithmic scale. For this composition, at T_s=60oC, we observed an early spreading stage, an intermediate pinned stage and a late receding stage of evaporation. Unlike T_s=25oC, at the early times of the evaporation process, the contact angle of the droplet of pure water at T_s=60oC is greater than 90. Late stage interfacial instability and even droplet break-up are observed for some (though not all) binary mixture compositions. The evaporation dynamics for different compositions at T_s=60oC exhibit a self-similar trend. Finally, the evaporation rates of pure and binary droplets at different substrate temperatures are compared against a theoretical model developed for pure and binary mixture droplets.
△ Less
Submitted 10 July, 2019;
originally announced July 2019.
