-
Motion-Driven Neural Optimizer for Prophylactic Braces Made by Distributed Microstructures
Authors:
Xingjian Han,
Yu Jiang,
Weiming Wang,
Guoxin Fang,
Simeon Gill,
Zhiqiang Zhang,
Shengfa Wang,
Jun Saito,
Deepak Kumar,
Zhongxuan Luo,
Emily Whiting,
Charlie C. L. Wang
Abstract:
Joint injuries, and their long-term consequences, present a substantial global health burden. Wearable prophylactic braces are an attractive potential solution to reduce the incidence of joint injuries by limiting joint movements that are related to injury risk. Given human motion and ground reaction forces, we present a computational framework that enables the design of personalized braces by opt…
▽ More
Joint injuries, and their long-term consequences, present a substantial global health burden. Wearable prophylactic braces are an attractive potential solution to reduce the incidence of joint injuries by limiting joint movements that are related to injury risk. Given human motion and ground reaction forces, we present a computational framework that enables the design of personalized braces by optimizing the distribution of microstructures and elasticity. As varied brace designs yield different reaction forces that influence kinematics and kinetics analysis outcomes, the optimization process is formulated as a differentiable end-to-end pipeline in which the design domain of microstructure distribution is parameterized onto a neural network. The optimized distribution of microstructures is obtained via a self-learning process to determine the network coefficients according to a carefully designed set of losses and the integrated biomechanical and physical analyses. Since knees and ankles are the most commonly injured joints, we demonstrate the effectiveness of our pipeline by designing, fabricating, and testing prophylactic braces for the knee and ankle to prevent potentially harmful joint movements.
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
High-precision mass measurements of the ground and isomeric states in $^{124,125}$Ag
Authors:
J. Ruotsalainen,
D. A. Nesterenko,
M. Stryjczyk,
A. Kankainen,
L. Al Ayoubi,
O. Beliuskina,
L. Canete,
P. Chauveau,
R. P. de Groote,
P. Delahaye,
T. Eronen,
M. Flayol,
Z. Ge,
S. Geldhof,
W. Gins,
M. Hukkanen,
A. Jaries,
D. Kahl,
D. Kumar,
I. D. Moore,
S. Nikas,
H. Penttilä,
D. Pitman-Weymouth,
A. Raggio,
S. Rinta-Antila
, et al. (4 additional authors not shown)
Abstract:
The masses of the ground and isomeric states in $^{124,125}$Ag have been measured using the phase-imaging ion-cyclotron-resonance technique at the JYFLTRAP double Penning trap mass spectrometer. The ground states of $^{124}$Ag and $^{125}$Ag were found to be 30(250) keV and 250(430) keV less bound but 36 and 110 times more precise than in the Atomic Mass Evaluation 2020, respectively. The excitati…
▽ More
The masses of the ground and isomeric states in $^{124,125}$Ag have been measured using the phase-imaging ion-cyclotron-resonance technique at the JYFLTRAP double Penning trap mass spectrometer. The ground states of $^{124}$Ag and $^{125}$Ag were found to be 30(250) keV and 250(430) keV less bound but 36 and 110 times more precise than in the Atomic Mass Evaluation 2020, respectively. The excitation energy of $^{124}$Ag$^{m}$, ${E_x = 188.2(25)}$ keV, was determined for the first time. The new precise mass values have been utilised to study the evolution of nuclear structure via two-neutron separation energies. The impact on the astrophysical rapid neutron capture process has been investigated via neutron-capture reaction rate calculations. The precision measurements indicate a more linear trend in two-neutron separation energies and reduce the mass-related uncertainties for the neutron-capture rate of $^{124}$Ag$(n,γ)^{125}$Ag by a factor of around 100. The new mass values also improve the mass of $^{123}$Pd, previously measured using $^{124}$Ag as a reference.
△ Less
Submitted 26 August, 2024;
originally announced August 2024.
-
Analysis of nearly planar defects using the Thomas--Fermi--von Weiszacker model
Authors:
Dharamveer Kumar,
Amuthan A. Ramabathiran
Abstract:
We analyze the convergence of the electron density and relative energy with respect to a perfect crystal of a class of volume defects that are compactly contained along one direction while being of infinite extent along the other two using the Thomas-Fermi-von Weiszacker (TFW) model. We take advantage of prior work on the thermodynamic limit and stability estimates in the TFW setting, and speciali…
▽ More
We analyze the convergence of the electron density and relative energy with respect to a perfect crystal of a class of volume defects that are compactly contained along one direction while being of infinite extent along the other two using the Thomas-Fermi-von Weiszacker (TFW) model. We take advantage of prior work on the thermodynamic limit and stability estimates in the TFW setting, and specialize it to the case of nearly planar defects. In particular, we prove that the relative energy of the defective crystal, with respect to a perfect crystal, is finite, and in fact conforms to a well-posed minimization problem. We also establish convergence of the electronic fields to the perturbation caused by the nearly planar defect. Our main finding is that perturbations to both the density and electrostatic potential due to the presence of the nearly planar defect decay exponentially away from the defect, in agreement with the known locality property of the TFW model. We use these results to infer bounds on the generalized stacking fault energy, in particular the finiteness of this energy, and discuss its implications for numerical calculations. We conclude with a brief presentation of numerical results on the (non-convex) Thomas-Fermi-von Weiszacker-Dirac (TFWD) model that includes the Dirac exchange in the universal functional, and discuss its implications for future work.
△ Less
Submitted 21 August, 2024;
originally announced August 2024.
-
SAGE-RT: Synthetic Alignment data Generation for Safety Evaluation and Red Teaming
Authors:
Anurakt Kumar,
Divyanshu Kumar,
Jatan Loya,
Nitin Aravind Birur,
Tanay Baswa,
Sahil Agarwal,
Prashanth Harshangi
Abstract:
We introduce Synthetic Alignment data Generation for Safety Evaluation and Red Teaming (SAGE-RT or SAGE) a novel pipeline for generating synthetic alignment and red-teaming data. Existing methods fall short in creating nuanced and diverse datasets, providing necessary control over the data generation and validation processes, or require large amount of manually generated seed data. SAGE addresses…
▽ More
We introduce Synthetic Alignment data Generation for Safety Evaluation and Red Teaming (SAGE-RT or SAGE) a novel pipeline for generating synthetic alignment and red-teaming data. Existing methods fall short in creating nuanced and diverse datasets, providing necessary control over the data generation and validation processes, or require large amount of manually generated seed data. SAGE addresses these limitations by using a detailed taxonomy to produce safety-alignment and red-teaming data across a wide range of topics. We generated 51,000 diverse and in-depth prompt-response pairs, encompassing over 1,500 topics of harmfulness and covering variations of the most frequent types of jailbreaking prompts faced by large language models (LLMs). We show that the red-teaming data generated through SAGE jailbreaks state-of-the-art LLMs in more than 27 out of 32 sub-categories, and in more than 58 out of 279 leaf-categories (sub-sub categories). The attack success rate for GPT-4o, GPT-3.5-turbo is 100% over the sub-categories of harmfulness. Our approach avoids the pitfalls of synthetic safety-training data generation such as mode collapse and lack of nuance in the generation pipeline by ensuring a detailed coverage of harmful topics using iterative expansion of the topics and conditioning the outputs on the generated raw-text. This method can be used to generate red-teaming and alignment data for LLM Safety completely synthetically to make LLMs safer or for red-teaming the models over a diverse range of topics.
△ Less
Submitted 14 August, 2024;
originally announced August 2024.
-
Comparing Femtosecond Optical Tweezers with Conventional CW Optical Tweezers
Authors:
Ajitesh Singh,
Krishna Kant Singh,
Deepak Kumar,
Debabrata Goswami
Abstract:
In this work, we present a comparative study between continuous-wave (CW) and pulsed optical tweezers for 250 nm, 500 nm and 1-micron radius polystyrene beads at 5 different laser powers. We have used a Ti:Sapphire (MIRA 900F) laser that can be easily switched from CW to pulsed mode of operation, so there is no change in the experimental conditions in the two cases. We have measured the difference…
▽ More
In this work, we present a comparative study between continuous-wave (CW) and pulsed optical tweezers for 250 nm, 500 nm and 1-micron radius polystyrene beads at 5 different laser powers. We have used a Ti:Sapphire (MIRA 900F) laser that can be easily switched from CW to pulsed mode of operation, so there is no change in the experimental conditions in the two cases. We have measured the difference in the trap strength in both cases by fitting the power spectrum curve with Lorentzian. As it turns out, trapping with pulsed tweezers seems to be more effective for the smaller particles and as the particle size is increased both CW and pulsed tweezers appear to be equally effective at lower average laser powers but as the power is increased pulsed tweezers do a better job at stable trapping.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
Leaky-Integrate-Fire Neuron via Synthetic Antiferromagnetic Coupling and Spin-Orbit Torque
Authors:
Badsha Sekh,
Durgesh Kumar,
Hasibur Rahaman,
Ramu Maddu,
Jianpeng Chan,
Wai Lum William Mah,
S. N. Piramanayagam
Abstract:
Neuromorphic computing (NC) is a promising candidate for artificial intelligence applications. To realize NC, electronic analogues of brain components, such as synapses and neurons, must be designed. In spintronics, domain wall (DW) based magnetic tunnel junctions - which offer both synaptic and neuronal functionalities - are one of the promising candidates. An electronic neuron should exhibit lea…
▽ More
Neuromorphic computing (NC) is a promising candidate for artificial intelligence applications. To realize NC, electronic analogues of brain components, such as synapses and neurons, must be designed. In spintronics, domain wall (DW) based magnetic tunnel junctions - which offer both synaptic and neuronal functionalities - are one of the promising candidates. An electronic neuron should exhibit leaky-integrate-fire functions similar to their biological counterparts. However, most experimental studies focused only on the integrate-and-fire functions, overlooking the leaky function. Here, we report on a domain wall neuron device that achieves integration using spin-orbit torque-induced domain wall motion and a leaky function via synthetic antiferromagnetic coupling. By fabricating Hall bar devices in a special geometry, we could achieve these two functionalities. During the leaky process, the maximum DW velocity achieved was 2500 μm/s. The proposed design utilizes materials used in STT-MRAM fabrication and is compatible with CMOS fabrication. Therefore, this neuron can be readily integrated into NC.
△ Less
Submitted 16 August, 2024;
originally announced August 2024.
-
VLPG-Nav: Object Navigation Using Visual Language Pose Graph and Object Localization Probability Maps
Authors:
Senthil Hariharan Arul,
Dhruva Kumar,
Vivek Sugirtharaj,
Richard Kim,
Xuewei,
Qi,
Rajasimman Madhivanan,
Arnie Sen,
Dinesh Manocha
Abstract:
We present VLPG-Nav, a visual language navigation method for guiding robots to specified objects within household scenes. Unlike existing methods primarily focused on navigating the robot toward objects, our approach considers the additional challenge of centering the object within the robot's camera view. Our method builds a visual language pose graph (VLPG) that functions as a spatial map of VL…
▽ More
We present VLPG-Nav, a visual language navigation method for guiding robots to specified objects within household scenes. Unlike existing methods primarily focused on navigating the robot toward objects, our approach considers the additional challenge of centering the object within the robot's camera view. Our method builds a visual language pose graph (VLPG) that functions as a spatial map of VL embeddings. Given an open vocabulary object query, we plan a viewpoint for object navigation using the VLPG. Despite navigating to the viewpoint, real-world challenges like object occlusion, displacement, and the robot's localization error can prevent visibility. We build an object localization probability map that leverages the robot's current observations and prior VLPG. When the object isn't visible, the probability map is updated and an alternate viewpoint is computed. In addition, we propose an object-centering formulation that locally adjusts the robot's pose to center the object in the camera view. We evaluate the effectiveness of our approach through simulations and real-world experiments, evaluating its ability to successfully view and center the object within the camera field of view. VLPG-Nav demonstrates improved performance in locating the object, navigating around occlusions, and centering the object within the robot's camera view, outperforming the selected baselines in the evaluation metrics.
△ Less
Submitted 15 August, 2024;
originally announced August 2024.
-
Equivalence of Dubins Path on Sphere with Geographic Coordinates and Moving Frames
Authors:
Deepak Prakash Kumar,
Swaroop Darbha,
Satyanarayana G. Manyam,
David W. Casbeer,
Meir Pachter
Abstract:
In this article, two methods of addressing path planning for a Dubins vehicle moving on a sphere are considered, wherein either spherical coordinates or a moving frame are considered to describe the vehicle's motion. The primary contribution of this article is to show the equivalence of these two approaches, which in turn shows that the results known for the moving frame-based description transfer…
▽ More
In this article, two methods of addressing path planning for a Dubins vehicle moving on a sphere are considered, wherein either spherical coordinates or a moving frame are considered to describe the vehicle's motion. The primary contribution of this article is to show the equivalence of these two approaches, which in turn shows that the results known for the moving frame-based description transfer to the model utilizing spherical coordinates.
△ Less
Submitted 13 August, 2024;
originally announced August 2024.
-
Magnetic field amplification and decay in cosmic string wakes
Authors:
Deepanshu Bisht,
Dilip Kumar,
Soumen Nayak,
Soma Sanyal
Abstract:
We do a detailed study on vortex formation in a magnetized plasma within the spacetime of a moving cosmic string using analytical and numerical methods. The conical spacetime around the cosmic string causes the frozen-in magnetic field to deform due to the fluid flow. We find that the overdensity in the wake region amplifies the magnetic field. This amplification depends on the direction and the l…
▽ More
We do a detailed study on vortex formation in a magnetized plasma within the spacetime of a moving cosmic string using analytical and numerical methods. The conical spacetime around the cosmic string causes the frozen-in magnetic field to deform due to the fluid flow. We find that the overdensity in the wake region amplifies the magnetic field. This amplification depends on the direction and the lengthscale of the magnetic perturbations. Alfvens theorem of flux conservation explains this result. However, our study also shows that the magnetic field can decay depending on the perturbation lengthscale, due to the breakdown of Alfvens theorem at a certain lengthscale. This lengthscale is the gyroradius of the charged particles in the plasma. Our findings are significant for understanding magnetic reconnection in cosmic string wakes.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
Investigation of Novel Preclinical Total Body PET Designed With J-PET Technology:A Simulation Study
Authors:
M. Dadgar,
S. Parzych,
F. Tayefi Ardebili,
J. Baran,
N. Chug,
C. Curceanu,
E. Czerwinski,
K. Dulski,
K. Eliyan,
A. Gajos,
B. C. Hiesmayr,
K. Kacprzak,
L. Kaplon,
K. Klimaszewski,
P. Konieczka,
G. Korcyl,
T. Kozik,
W. Krzemien,
D. Kumar,
S. Niedzwiecki,
D. Panek,
E. Perez del Rio,
L. Raczynski,
S. Sharma,
Shivani
, et al. (7 additional authors not shown)
Abstract:
The growing interest in human-grade total body positron emission tomography (PET) systems has also application in small animal research. Due to the existing limitations in human-based studies involving drug development and novel treatment monitoring, animal-based research became a necessary step for testing and protocol preparation. In this simulation-based study two unconventional, cost-effective…
▽ More
The growing interest in human-grade total body positron emission tomography (PET) systems has also application in small animal research. Due to the existing limitations in human-based studies involving drug development and novel treatment monitoring, animal-based research became a necessary step for testing and protocol preparation. In this simulation-based study two unconventional, cost-effective small animal total body PET scanners (for mouse and rat studies) have been investigated in order to inspect their feasibility for preclinical research. They were designed with the novel technology explored by the Jagiellonian-PET (J-PET) Collaboration. Two main PET characteristics: sensitivity and spatial resolution were mainly inspected to evaluate their performance. Moreover, the impact of the scintillator dimension and time-of-flight on the latter parameter was examined in order to design the most efficient tomographs. The presented results show that for mouse TB J-PET the achievable system sensitivity is equal to 2.35% and volumetric spatial resolution to 9.46 +- 0.54 mm3, while for rat TB J-PET they are equal to 2.6% and 14.11 +- 0.80 mm3, respectively. Furthermore, it was shown that the designed tomographs are almost parallax-free systems, hence, they resolve the problem of the acceptance criterion tradeoff between enhancing spatial resolution and reducing sensitivity.
△ Less
Submitted 6 August, 2024; v1 submitted 1 August, 2024;
originally announced August 2024.
-
Comparative studies of plastic scintillator strips with high technical attenuation length for the total-body J-PET scanner
Authors:
L. Kaplon,
J. Baran,
N. Chug,
A. Coussat,
C. Curceanu,
E. Czerwinski,
M. Dadgar,
K. Dulski,
J. Gajewski,
A. Gajos,
B. Hiesmayr,
E. Kavya Valsan,
K. Klimaszewski,
G. Korcyl,
T. Kozik,
W. Krzemien,
D. Kumar,
G. Moskal,
S. Niedzwiecki,
D. Panek,
S. Parzych,
E. Perez del Rio,
L. Raczynski,
A. Rucinski,
S. Sharma
, et al. (9 additional authors not shown)
Abstract:
Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm x 24 mm x 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blu…
▽ More
Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm x 24 mm x 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blue-emitting plastic scintillators with low attenuation of visible light were tested, namely: polyvinyl toluene-based BC-408, EJ-200, RP-408, and polystyrene-based Epic, SP32 and UPS-923A. For determination of the best type of plastic scintillator for totalbody Jagiellonian positron emission tomograph (TB-J-PET) construction, emission and transmission spectra, and technical attenuation length (TAL) of blue light-emitting by the scintillators were measured and compared. The TAL values were determined with the use of UV lamp as excitation source, and photodiode as light detector. Emission spectra of investigated scintillators have maxima in the range from 420 nm to 429 nm. The BC-408 and EJ-200 have the highest transmittance values of about 90% at the maximum emission wavelength measured through a 6 mm thick scintillator strip and the highest technical attenuation length reaching about 2000 mm, allowing assembly of long detection modules for time-of-flight (TOF) J-PET scanners. Influence of the 6 mm x 6 mm, 12 mm x 6 mm, 24 mm x 6 mm cross-sections of the 1000 mm long EJ-200 plastic scintillator on the TAL and signal intensity was measured. The highest TAL value was determined for samples with 24 mm x 6 mm cross-section.
△ Less
Submitted 3 August, 2024; v1 submitted 28 July, 2024;
originally announced July 2024.
-
TAMIGO: Empowering Teaching Assistants using LLM-assisted viva and code assessment in an Advanced Computing Class
Authors:
Anishka IIITD,
Diksha Sethi,
Nipun Gupta,
Shikhar Sharma,
Srishti Jain,
Ujjwal Singhal,
Dhruv Kumar
Abstract:
Large Language Models (LLMs) have significantly transformed the educational landscape, offering new tools for students, instructors, and teaching assistants. This paper investigates the application of LLMs in assisting teaching assistants (TAs) with viva and code assessments in an advanced computing class on distributed systems in an Indian University. We develop TAMIGO, an LLM-based system for TA…
▽ More
Large Language Models (LLMs) have significantly transformed the educational landscape, offering new tools for students, instructors, and teaching assistants. This paper investigates the application of LLMs in assisting teaching assistants (TAs) with viva and code assessments in an advanced computing class on distributed systems in an Indian University. We develop TAMIGO, an LLM-based system for TAs to evaluate programming assignments.
For viva assessment, the TAs generated questions using TAMIGO and circulated these questions to the students for answering. The TAs then used TAMIGO to generate feedback on student answers. For code assessment, the TAs selected specific code blocks from student code submissions and fed it to TAMIGO to generate feedback for these code blocks. The TAMIGO-generated feedback for student answers and code blocks was used by the TAs for further evaluation.
We evaluate the quality of LLM-generated viva questions, model answers, feedback on viva answers, and feedback on student code submissions. Our results indicate that LLMs are highly effective at generating viva questions when provided with sufficient context and background information. However, the results for LLM-generated feedback on viva answers were mixed; instances of hallucination occasionally reduced the accuracy of feedback. Despite this, the feedback was consistent, constructive, comprehensive, balanced, and did not overwhelm the TAs. Similarly, for code submissions, the LLM-generated feedback was constructive, comprehensive and balanced, though there was room for improvement in aligning the feedback with the instructor-provided rubric for code evaluation. Our findings contribute to understanding the benefits and limitations of integrating LLMs into educational settings.
△ Less
Submitted 23 July, 2024;
originally announced July 2024.
-
Pretraining Data and Tokenizer for Indic LLM
Authors:
Rahul Kumar,
Shubham Kakde,
Divyansh Rajput,
Daud Ibrahim,
Rishabh Nahata,
Pidathala Sowjanya,
Deepak Kumar
Abstract:
We present a novel approach to data preparation for developing multilingual Indic large language model. Our meticulous data acquisition spans open-source and proprietary sources, including Common Crawl, Indic books, news articles, and Wikipedia, ensuring a diverse and rich linguistic representation. For each Indic language, we design a custom preprocessing pipeline to effectively eliminate redunda…
▽ More
We present a novel approach to data preparation for developing multilingual Indic large language model. Our meticulous data acquisition spans open-source and proprietary sources, including Common Crawl, Indic books, news articles, and Wikipedia, ensuring a diverse and rich linguistic representation. For each Indic language, we design a custom preprocessing pipeline to effectively eliminate redundant and low-quality text content. Additionally, we perform deduplication on Common Crawl data to address the redundancy present in 70% of the crawled web pages. This study focuses on developing high-quality data, optimizing tokenization for our multilingual dataset for Indic large language models with 3B and 7B parameters, engineered for superior performance in Indic languages. We introduce a novel multilingual tokenizer training strategy, demonstrating our custom-trained Indic tokenizer outperforms the state-of-the-art OpenAI Tiktoken tokenizer, achieving a superior token-to-word ratio for Indic languages.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Non-maximal entanglement of photons from positron-electron annihilation demonstrated using a novel plastic PET scanner
Authors:
P. Moskal,
D. Kumar,
S. Sharma,
E. Y. Beyene,
N. Chug,
A. Coussat,
C. Curceanu,
E. Czerwinski,
M. Das,
K. Dulski,
M. Gorgol,
B. Jasinska,
K. Kacprzak,
T. Kaplanoglu,
L. Kaplon,
K. Klimaszewski,
T. Kozik,
E. Lisowski,
F. Lisowski,
W. Mryka,
S. Niedzwiecki,
S. Parzych,
E. P. del Rio,
L. Raczynski,
M. Radler
, et al. (7 additional authors not shown)
Abstract:
In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originat…
▽ More
In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originated. Here we present a novel J-PET scanner built from plastic scintillators, in which annihilation photons interact predominantly via the Compton effect, providing information about photon polarization in addition to information on photon direction of propagation. Theoretically, photons from the decay of positronium in a vacuum are maximally entangled in polarization. However, in matter, when the positron from positronium annihilates with the electron bound to the atom, the question arises whether the photons from such annihilation are maximally entangled. In this work, we determine the distribution of the relative angle between polarization orientations of two photons from positron-electron annihilation in a porous polymer. Contrary to prior results for positron annihilation in aluminum and copper, where the strength of observed correlations is as expected for maximally entangled photons, our results show a significant deviation. We demonstrate that in porous polymer, photon polarization correlation is weaker than for maximally entangled photons but stronger than for separable photons. The data indicate that more than 40% of annihilations in Amberlite resin lead to a non-maximally entangled state. Our result indicates the degree of correlation depends on the annihilation mechanism and the molecular arrangement. We anticipate that the introduced Compton interaction-based PET system opens a promising perspective for exploring polarization correlations in PET as a novel diagnostic indicator.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
6GSoft: Software for Edge-to-Cloud Continuum
Authors:
Muhammad Azeem Akbar,
Matteo Esposito,
Sami Hyrynsalmi,
Karthikeyan Dinesh Kumar,
Valentina Lenarduzzi,
Xiaozhou Li,
Ali Mehraj,
Tommi Mikkonen,
Sergio Moreschini,
Niko Mäkitalo,
Markku Oivo,
Anna-Sofia Paavonen,
Risha Parveen,
Kari Smolander,
Ruoyu Su,
Kari Systä,
Davide Taibi,
Nan Yang,
Zheying Zhang,
Muhammad Zohaib
Abstract:
In the era of 6G, developing and managing software requires cutting-edge software engineering (SE) theories and practices tailored for such complexity across a vast number of connected edge devices. Our project aims to lead the development of sustainable methods and energy-efficient orchestration models specifically for edge environments, enhancing architectural support driven by AI for contempora…
▽ More
In the era of 6G, developing and managing software requires cutting-edge software engineering (SE) theories and practices tailored for such complexity across a vast number of connected edge devices. Our project aims to lead the development of sustainable methods and energy-efficient orchestration models specifically for edge environments, enhancing architectural support driven by AI for contemporary edge-to-cloud continuum computing. This initiative seeks to position Finland at the forefront of the 6G landscape, focusing on sophisticated edge orchestration and robust software architectures to optimize the performance and scalability of edge networks. Collaborating with leading Finnish universities and companies, the project emphasizes deep industry-academia collaboration and international expertise to address critical challenges in edge orchestration and software architecture, aiming to drive significant advancements in software productivity and market impact.
△ Less
Submitted 9 July, 2024; v1 submitted 8 July, 2024;
originally announced July 2024.
-
Exploring Alternative Cosmologies with the LSST: Simulated Forecasts and Current Observational Constraints
Authors:
Dharmendra Kumar,
Ayan Mitra,
Shahnawaz A. Adil,
Anjan A. Sen
Abstract:
In recent years, the Lambda Cold Dark Matter (LCDM) model, which has been pivotal in cosmological studies, has faced significant challenges due to emerging observational and theoretical inconsistencies. This paper explores alternative cosmological models to address these discrepancies, using simulated three years photometric Supernovae Ia data from the Legacy Survey of Space and Time (LSST), suppl…
▽ More
In recent years, the Lambda Cold Dark Matter (LCDM) model, which has been pivotal in cosmological studies, has faced significant challenges due to emerging observational and theoretical inconsistencies. This paper explores alternative cosmological models to address these discrepancies, using simulated three years photometric Supernovae Ia data from the Legacy Survey of Space and Time (LSST), supplemented with additional Pantheon+, Union, and the recently released Dark Energy Survey 5 Years (DESY5) supernova compilations and Baryon Acoustic Oscillation (BAO) measurements. We assess the constraining power of these datasets on various dynamic dark energy models, including CPL, BA, JBP, SCPL, and GCG. Our analysis demonstrates that the LSST with its high precision data, can provide tighter constraints on dark energy parameters compared to other datasets. Additionally, the inclusion of BAO measurements significantly improves parameter constraints across all models.
Except for Pantheon+, we find that across all the cosmological datasets, and the dark energy models considered in this work, there is a consistent deviation from the LCDM model that exceeds a 2-sigma significance level. Our findings underscore the necessity of exploring dynamic dark energy models, which offer more consistent frameworks with fundamental physics and observational data, potentially resolving tensions within the LCDM paradigm. Furthermore, the use of simulated LSST data highlights the survey's potential in offering significant advantages for exploring alternative cosmologies, suggesting that future LSST observations would play a crucial role.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Upper Bound Estimate of the Electronic Scattering Potential of a Weakly Interacting Molecular Film on a Metal
Authors:
Dhaneesh Kumar,
Matthew Hendy,
Jack Hellerstedt,
Joanna Hewes,
Shon Kolomoisky,
Cornelius Krull,
Agustin Schiffrin
Abstract:
Thin organic films and two-dimensional (2D) molecular assemblies on solid surfaces yield the potential for applications in molecular electronics, optoelectronics, catalysis, and sensing. These applications rely on the intrinsic electronic properties of the hybrid organic/inorganic interface. Here, we investigate the energy dispersion of 2D electronic states at the interface between an atomically t…
▽ More
Thin organic films and two-dimensional (2D) molecular assemblies on solid surfaces yield the potential for applications in molecular electronics, optoelectronics, catalysis, and sensing. These applications rely on the intrinsic electronic properties of the hybrid organic/inorganic interface. Here, we investigate the energy dispersion of 2D electronic states at the interface between an atomically thin self-assembled molecular film, comprised of flat, noncovalently bonded 9,10-dicyanoanthracene (DCA) molecules, and a Ag(111) surface. Using Fourier-transformed scanning tunnelling spectroscopy (FT-STS), we determined that the 2D electronic wave functions with wavevectors within ~80% of the first Brillouin zone (BZ) area close to the Gamma-point are free-electron-like, suggesting a weak electronic interaction between the 2D molecular film and the metal surface. Via a perturbative second-order correction to the free electron energy dispersion, we further established an upper bound for the amplitude of the scattering potential resulting from the self-assembled molecular film that the interface electrons are subject to, on the order of 1.5 eV. Our approach allows for quantifying electronic interactions at hybrid 2D interfaces and heterostructures.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Tensor square and isoclinic extensions of multiplicative Lie algebras
Authors:
Dev Karan Singh,
Amit Kumar,
Sumit Kumar Upadhyay,
Shiv Datt Kumar
Abstract:
In this paper, we discuss the capable and isoclinic properties of the tensor square in the context of multiplicative Lie algebras. We also developed the concept of isoclinic extensions and proved several results for multiplicative Lie algebras. Consequently, we demonstrate that covers of a multiplicative Lie algebra are mutually isoclinic.
In this paper, we discuss the capable and isoclinic properties of the tensor square in the context of multiplicative Lie algebras. We also developed the concept of isoclinic extensions and proved several results for multiplicative Lie algebras. Consequently, we demonstrate that covers of a multiplicative Lie algebra are mutually isoclinic.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Electric Field Control of Molecular Charge State in a Single-Component 2D Organic Nanoarray
Authors:
Dhaneesh Kumar,
Cornelius Krull,
Yuefeng Yin,
Nikhil V. Medhekar,
Agustin Schiffrin
Abstract:
Quantum dots (QD) with electric-field-controlled charge state are promising for electronics applications, e.g., digital information storage, single-electron transistors and quantum computing. Inorganic QDs consisting of semiconductor nanostructures or heterostructures often offer limited control on size and composition distribution, as well as low potential for scalability and/or nanoscale miniatu…
▽ More
Quantum dots (QD) with electric-field-controlled charge state are promising for electronics applications, e.g., digital information storage, single-electron transistors and quantum computing. Inorganic QDs consisting of semiconductor nanostructures or heterostructures often offer limited control on size and composition distribution, as well as low potential for scalability and/or nanoscale miniaturization. Owing to their tunability and self-assembly capability, using organic molecules as building nano-units can allow for bottom-up synthesis of two-dimensional (2D) nanoarrays of QDs. However, 2D molecular self-assembly protocols are often applicable on metals surfaces, where electronic hybridization and Fermi level pinning can hinder electric-field control of the QD charge state. Here, we demonstrate the synthesis of a single-component self-assembled 2D array of molecules [9, 10-dicyanoanthracene (DCA)] that exhibit electric-field-controlled spatially periodic charging on a noble metal surface, Ag(111). The charge state of DCA can be altered (between neutral and negative), depending on its adsorption site, by the local electric field induced by a scanning tunneling microscope tip. Limited metal-molecule interactions result in an effective tunneling barrier between DCA and Ag(111) that enables electric-field-induced electron population of the lowest unoccupied molecular orbital (LUMO) and hence charging of the molecule. Subtle site-dependent variation of the molecular adsorption height translates into a significant spatial modulation of the molecular polarizability, dielectric constant and LUMO energy level alignment, giving rise to a spatially dependent effective molecule-surface tunneling barrier and likelihood of charging. This work offers potential for high-density 2D self-assembled nanoarrays of identical QDs whose charge states can be addressed individually with an electric field.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Fox's H-Functions: A Gentle Introduction Through Astrophysical Thermonuclear Functions
Authors:
Hans J. Haubold,
Dilip Kumar,
Ashik A. Kabeer
Abstract:
Needed for cosmological and stellar nucleosynthesis, we are studying the closed-form analytic evaluation of thermonuclear reaction rates. In this context, we undertake a comprehensive analysis of three distinct velocity distributions, namely the Maxwell-Boltzmann distribution, the pathway distribution, and the Mittag-Leffer distribution. We emphasize the utilization of Meijer G-function and Fox H-…
▽ More
Needed for cosmological and stellar nucleosynthesis, we are studying the closed-form analytic evaluation of thermonuclear reaction rates. In this context, we undertake a comprehensive analysis of three distinct velocity distributions, namely the Maxwell-Boltzmann distribution, the pathway distribution, and the Mittag-Leffer distribution. We emphasize the utilization of Meijer G-function and Fox H-function which are special functions of mathematical physics.
△ Less
Submitted 18 May, 2024;
originally announced May 2024.
-
Results on Dynamics of Bungee set of Composite Entire Functions in the Eremenko-Lyubich Class
Authors:
Dinesh Kumar,
Soumyajeet Das
Abstract:
In this paper, we have discussed the dynamics of composite entire functions in terms of relationship between bungee set, repelling periodic points (to be denoted by $RP$) and rationally indifferent fixed point set. We have established relation between the dynamics of composite function and the functions taken for composition. We showed that the union of their Bungee sets contains Bungee set of the…
▽ More
In this paper, we have discussed the dynamics of composite entire functions in terms of relationship between bungee set, repelling periodic points (to be denoted by $RP$) and rationally indifferent fixed point set. We have established relation between the dynamics of composite function and the functions taken for composition. We showed that the union of their Bungee sets contains Bungee set of the composite function. We also showed that $RP$ set of composite functions contains the $ RP$ set of functions used for the composition. We have mostly dealt with the permutable functions of class $\mathcal{B}$. These results hold true when we have a composite function in which one function is a periodic translation of another.
△ Less
Submitted 27 June, 2024; v1 submitted 18 May, 2024;
originally announced May 2024.
-
Quantum Unitary Matrix Representation of Lattice Boltzmann Method for Fluid Flow Simulation
Authors:
E. Dinesh Kumar,
Steven H. Frankel
Abstract:
In the present contribution, we propose a quantum unitary matrix representation for the Lattice Boltzmann Method (LBM) to simulate fluid flows in the low Reynolds number ($Re$) regime. Since the particle distribution functions are encoded as probability amplitudes of the quantum state, we show that the state of the ancilla qubit must be controlled during the initial state preparation. In contrast…
▽ More
In the present contribution, we propose a quantum unitary matrix representation for the Lattice Boltzmann Method (LBM) to simulate fluid flows in the low Reynolds number ($Re$) regime. Since the particle distribution functions are encoded as probability amplitudes of the quantum state, we show that the state of the ancilla qubit must be controlled during the initial state preparation. In contrast to methods such as the linear combination of unitaries to implement non-unitary operators, we utilize the classical singular value decomposition (SVD) to decompose the collision and streaming operators into a product of unitaries. Our approach has been tested using benchmark problems such as advection-diffusion of a Gaussian hill, Poiseuille flow, Couette flow, and the lid-driven cavity problem. We report the two-qubit controlled-NOT (CNOT) and single-qubit U gate counts for test cases involving 9 to 12 qubits and grid sizes ranging from 24 to 216 points. While the gate count closely aligns with the theoretical limit, the high number of two-qubit gates on the order of $10^7$ requires special attention as it relates to circuit synthesis.
△ Less
Submitted 28 August, 2024; v1 submitted 14 May, 2024;
originally announced May 2024.
-
End-to-End Waveform and Beamforming Optimization for RF Wireless Power Transfer
Authors:
Abdul Basit Khattak,
Onel L. A. López,
Amirhossein Azarbahram,
Deepak Kumar,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power ampl…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power amplifier, and rectenna. Optimizing PTE requires careful consideration of these factors, motivating the current work. Herein, we consider an analog multi-antenna power transmitter that aims to charge a single energy harvester. We first provide a mathematical framework to calculate the harvested power from multi-tone signal transmissions and the system power consumption. Then, we formulate the joint waveform and analog beamforming design problem to minimize power consumption and meet the charging requirements. Finally, we propose an optimization approach relying on swarm intelligence to solve the specified problem. Simulation results quantify the power consumption reduction as the DAC, phase shifters resolution, and antenna length are increased, while it is seen that increasing system frequency results in higher power consumption.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Geodesic motion of particles in the vicinity of the $κ$-deformed Schwarzchild Black Hole
Authors:
Dilip Kumar,
Suman Kumar Panja,
Abhisek Saha,
Soma Sanyal
Abstract:
In this study, we investigate the geodesic motion of a test particle around the Schwarzchild black hole in a $κ$-deformed space-time. We compute a modified Lagrangian to obtain the $κ$-deformed effective potential and find the particle trajectories based on the constants of motion. For the same value of angular momentum, we obtain a significant deformation in the orbits of the particles due to the…
▽ More
In this study, we investigate the geodesic motion of a test particle around the Schwarzchild black hole in a $κ$-deformed space-time. We compute a modified Lagrangian to obtain the $κ$-deformed effective potential and find the particle trajectories based on the constants of motion. For the same value of angular momentum, we obtain a significant deformation in the orbits of the particles due to the non-commutativity of the $κ$-deformed space-time. The deformation parameter becomes more significant for higher values of the angular momentum. The radius of the individual trajectories become smaller and their velocities decrease compared to the commutative case. The radius of the innermost stable circular orbit ($r_{ISCO}$) is also found using the modified effective potential. Though the equations get modified due to the non-commutativity of the $κ$-deformed space-time, the $r_{ISCO}$ remains the same. We then study a large number of freely streaming particles moving in this $κ$-deformed space-time and analyze the movement of these particles around the black hole due to the non-commutativity of the space-time. We concentrate on particles with different angular momentum moving around the black hole. We find that the motion of the particles are modified due to the non-commutativity of the space-time. The particles move slower along their respective trajectories in the deformed space-time. So, they remain closer to the black hole for a longer period of time, indicating that the accretion of freely streaming particles around the black hole would be modified by the non-commutativity of the space-time.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
New contexts, old heuristics: How young people in India and the US trust online content in the age of generative AI
Authors:
Rachel Xu,
Nhu Le,
Rebekah Park,
Laura Murray,
Vishnupriya Das,
Devika Kumar,
Beth Goldberg
Abstract:
We conducted an in-person ethnography in India and the US to investigate how young people (18-24) trusted online content, with a focus on generative AI (GenAI). We had four key findings about how young people use GenAI and determine what to trust online. First, when online, we found participants fluidly shifted between mindsets and emotional states, which we term "information modes." Second, these…
▽ More
We conducted an in-person ethnography in India and the US to investigate how young people (18-24) trusted online content, with a focus on generative AI (GenAI). We had four key findings about how young people use GenAI and determine what to trust online. First, when online, we found participants fluidly shifted between mindsets and emotional states, which we term "information modes." Second, these information modes shaped how and why participants trust GenAI and how they applied literacy skills. In the modes where they spent most of their time, they eschewed literacy skills. Third, with the advent of GenAI, participants imported existing trust heuristics from familiar online contexts into their interactions with GenAI. Fourth, although study participants had reservations about GenAI, they saw it as a requisite tool to adopt to keep up with the times. Participants valued efficiency above all else, and used GenAI to further their goals quickly at the expense of accuracy. Our findings suggest that young people spend the majority of their time online not concerned with truth because they are seeking only to pass the time. As a result, literacy interventions should be designed to intervene at the right time, to match users' distinct information modes, and to work with their existing fact-checking practices.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Evolution of Interface Magnetism in Fe/Alq3 Bilayer Structure; Thickness-Dependent Interface Resolved Studies Under X-Ray Standing Wave
Authors:
Avinash G Khanderao,
V R Reddy,
Ilya Sergueev,
Dileep Kumar
Abstract:
In the present work, interfacial magnetism at metal organic interface is probed using an isotope sensitive interface resolved nuclear resonance scattering technique which is made depth selective under x-rays standing wave conditions. Using GIWAXS and GINRS measurements, this study evidences the presence of symmetry-based PMA which appears at a lower thickness of Fe having distortion in cubic symme…
▽ More
In the present work, interfacial magnetism at metal organic interface is probed using an isotope sensitive interface resolved nuclear resonance scattering technique which is made depth selective under x-rays standing wave conditions. Using GIWAXS and GINRS measurements, this study evidences the presence of symmetry-based PMA which appears at a lower thickness of Fe having distortion in cubic symmetry and disappears at a higher thickness of Fe as its cubic symmetry retains. The non-zero value of quadrupole splitting evidences the strain at the interfacial region which on increasing thickness of Fe relaxes. The diffusion of Fe is traced using XRF and NRR, deep penetration of Fe in Alq3 layer due to soft nature of the organic film is obtained. This thickness-dependent study enables us to understand the magnetic behavior of buried ferromagnetic metal in the vicinity of organic molecules.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Guided Conditional Diffusion Classifier (ConDiff) for Enhanced Prediction of Infection in Diabetic Foot Ulcers
Authors:
Palawat Busaranuvong,
Emmanuel Agu,
Deepak Kumar,
Shefalika Gautam,
Reza Saadati Fard,
Bengisu Tulu,
Diane Strong
Abstract:
To detect infected wounds in Diabetic Foot Ulcers (DFUs) from photographs, preventing severe complications and amputations. Methods: This paper proposes the Guided Conditional Diffusion Classifier (ConDiff), a novel deep-learning infection detection model that combines guided image synthesis with a denoising diffusion model and distance-based classification. The process involves (1) generating gui…
▽ More
To detect infected wounds in Diabetic Foot Ulcers (DFUs) from photographs, preventing severe complications and amputations. Methods: This paper proposes the Guided Conditional Diffusion Classifier (ConDiff), a novel deep-learning infection detection model that combines guided image synthesis with a denoising diffusion model and distance-based classification. The process involves (1) generating guided conditional synthetic images by injecting Gaussian noise to a guide image, followed by denoising the noise-perturbed image through a reverse diffusion process, conditioned on infection status and (2) classifying infections based on the minimum Euclidean distance between synthesized images and the original guide image in embedding space. Results: ConDiff demonstrated superior performance with an accuracy of 83% and an F1-score of 0.858, outperforming state-of-the-art models by at least 3%. The use of a triplet loss function reduces overfitting in the distance-based classifier. Conclusions: ConDiff not only enhances diagnostic accuracy for DFU infections but also pioneers the use of generative discriminative models for detailed medical image analysis, offering a promising approach for improving patient outcomes.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Role of stress/strain in tailoring the magnetic and transport properties of magnetic thin films and multilayers
Authors:
Arun Singh Dev,
Dileep Kumar
Abstract:
Magnetic anisotropy is a fundamental property of magnetic materials that determines the alignment of the spins along the preferential direction, called the easy axis of magnetization. Magnetic polycrystalline thin films offer several advantages over magnetic epitaxial thin films because of fabrication flexibility, higher coercivity and improved magnetic stability, higher magnetoresistance (useful…
▽ More
Magnetic anisotropy is a fundamental property of magnetic materials that determines the alignment of the spins along the preferential direction, called the easy axis of magnetization. Magnetic polycrystalline thin films offer several advantages over magnetic epitaxial thin films because of fabrication flexibility, higher coercivity and improved magnetic stability, higher magnetoresistance (useful in magneto-resistive devices such as magnetic field sensors and MRAM cells), cost-effectiveness and thermal stability, etc. In the case of polycrystalline thin films or multilayers, Magneto-crystalline anisotropy (MCA) is not expected due to the random orientation of grains. Therefore, understanding the origin of uniaxial magnetic anisotropy (UMA) is generally difficult and can't be understood in terms of crystal orientation. The origin of UMA in polycrystalline films is often related to the preparation conditions and substrate properties. In the present thesis, we have provided direct in-situ real-time evidence of the stress dependence of magnetic anisotropy through the multibeam optical stress sensor (MOSS) technique. Also, we have tuned the magnetic anisotropy in strength and direction using externally applied stress. To further increase the strength of the magnetic anisotropy, we have developed a new technique that creates a multilayer using a single magnetic material through sequential oblique and normal depositions. This oblique angle deposition technique also helps reduce the penetration of the top ferromagnetic layer inside the organic semiconductor layer in organic spin valve structures. We confirm our results through various in-situ (in UHV and HV) and ex-situ temperature-dependent conventional and unconventional structural, morphological, and magnetic measurements (both lab-based and synchrotron-based) that include MOKE, KERR, GIXRD, AFM, RHEED, and GISAXS, etc. measurements.
△ Less
Submitted 14 April, 2024;
originally announced May 2024.
-
Interplay between magnetic and lattice excitations and emergent multiple phase transitions in MnPSe3-xSx
Authors:
Deepu Kumar,
Nguyen The Hoang,
Yumin Sim,
Youngsu Choi,
Kalaivanan Raju,
Rajesh Kumar Ulaganathan,
Raman Sankar,
Maeng-Je Seong,
Kwang-Yong Choi
Abstract:
The intricate interplay between spin and lattice degrees of freedom in two-dimensional magnetic materials plays a pivotal role in modifying their magnetic characteristics, engendering hybrid quasiparticles, and implementing functional devices. Herein, we present our comprehensive and in-depth investigations on magnetic and lattice excitations of MnPSe3-xSx (x = 0, 0.5, and 1.5) alloys, utilizing t…
▽ More
The intricate interplay between spin and lattice degrees of freedom in two-dimensional magnetic materials plays a pivotal role in modifying their magnetic characteristics, engendering hybrid quasiparticles, and implementing functional devices. Herein, we present our comprehensive and in-depth investigations on magnetic and lattice excitations of MnPSe3-xSx (x = 0, 0.5, and 1.5) alloys, utilizing temperature- and polarization-dependent Raman scattering. Our experimental results reveal the occurrence of multiple phase transitions, evidenced by notable changes in phonon self-energy and the appearance or splitting of phonon modes. These emergent phases are tied to the development of long and short-range spin-spin correlations, as well as to spin reorientations or magnetic instabilities. Our analysis of two-magnon excitations as a function of temperature and composition showcases their hybridization with phonons whose degree weakens with increasing x. Moreover, the suppression of spin-dependent phonon intensity in chemically most-disordered MnPSe3-xSx (x = 1.5) suggests that chalcogen substitution offers a control knob of tuning spin and phonon dynamics by modulating concurrently superexchange pathways and a degree of trigonal distortions.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
A Novel Optimization-Based Collision Avoidance For Autonomous On-Orbit Assembly
Authors:
Siavash Tavana,
Sepideh Faghihi,
Anton de Ruiter,
Krishna Dev Kumar
Abstract:
The collision avoidance constraints are prominent as non-convex, non-differentiable, and challenging when defined in optimization-based motion planning problems. To overcome these issues, this paper presents a novel non-conservative collision avoidance technique using the notion of convex optimization to establish the distance between robotic spacecraft and space structures for autonomous on-orbit…
▽ More
The collision avoidance constraints are prominent as non-convex, non-differentiable, and challenging when defined in optimization-based motion planning problems. To overcome these issues, this paper presents a novel non-conservative collision avoidance technique using the notion of convex optimization to establish the distance between robotic spacecraft and space structures for autonomous on-orbit assembly operations. The proposed technique defines each ellipsoidal- and polyhedral-shaped object as the union of convex compact sets, each represented non-conservatively by a real-valued convex function. Then, the functions are introduced as a set of constraints to a convex optimization problem to produce a new set of differentiable constraints resulting from the optimality conditions. These new constraints are later fed into an optimal control problem to enforce collision avoidance where the motion planning for the autonomous on-orbit assembly takes place. Numerical experiments for two assembly scenarios in tight environments are presented to demonstrate the capability and effectiveness of the proposed technique. The results show that this framework leads to optimal non-conservative trajectories for robotic spacecraft in tight environments. Although developed for autonomous on-orbit assembly, this technique could be used for any generic motion planning problem where collision avoidance is crucial.
△ Less
Submitted 15 April, 2024; v1 submitted 11 April, 2024;
originally announced April 2024.
-
Negative Photo Conductivity Triggered with Visible Light in Wide Bandgap Oxide-Based Optoelectronic Crossbar Memristive Array for Photograph Sensing and Neuromorphic Computing Applications
Authors:
Dayanand Kumar,
Hanrui Li,
Amit Singh,
Manoj Kumar Rajbhar,
Abdul Momin Syed,
Hoonkyung Lee,
Nazek El-Atab
Abstract:
Photoresponsivity studies of wide-bandgap oxide-based devices have emerged as a vibrant and popular research area. Researchers have explored various material systems in their quest to develop devices capable of responding to illumination. In this study, we engineered a mature wide bandgap oxide-based bilayer heterostructure synaptic memristor to emulate the human brain for applications in neuromor…
▽ More
Photoresponsivity studies of wide-bandgap oxide-based devices have emerged as a vibrant and popular research area. Researchers have explored various material systems in their quest to develop devices capable of responding to illumination. In this study, we engineered a mature wide bandgap oxide-based bilayer heterostructure synaptic memristor to emulate the human brain for applications in neuromorphic computing and photograph sensing. The device exhibits advanced electric and electro-photonic synaptic functions, such as long-term potentiation (LTP), long-term depression (LTD), and paired pulse facilitation (PPF), by applying successive electric and photonic pulses. Moreover, the device exhibits exceptional electrical SET and photonic RESET endurance, maintaining its stability for a minimum of 1200 cycles without any degradation. Density functional theory calculations of the band structures provide insights into the conduction mechanism of the device. Based on this memristor array, we developed an autoencoder and convolutional neural network for noise reduction and image recognition tasks, which achieves a peak signal-to-noise ratio of 562 and high accuracy of 84.23%, while consuming lower energy by four orders of magnitude compared with the Tesla P40 GPU. This groundbreaking research not only opens doors for the integration of our device into image processing but also represents a significant advancement in the realm of in-memory computing and photograph sensing features in a single cell.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Analyzing LLM Usage in an Advanced Computing Class in India
Authors:
Anupam Garg,
Aryaman Raina,
Aryan Gupta,
Jaskaran Singh,
Manav Saini,
Prachi Iiitd,
Ronit Mehta,
Rupin Oberoi,
Sachin Sharma,
Samyak Jain,
Sarthak Tyagi,
Utkarsh Arora,
Dhruv Kumar
Abstract:
This study examines the use of large language models (LLMs) by undergraduate and graduate students for programming assignments in advanced computing classes. Unlike existing research, which primarily focuses on introductory classes and lacks in-depth analysis of actual student-LLM interactions, our work fills this gap. We conducted a comprehensive analysis involving 411 students from a Distributed…
▽ More
This study examines the use of large language models (LLMs) by undergraduate and graduate students for programming assignments in advanced computing classes. Unlike existing research, which primarily focuses on introductory classes and lacks in-depth analysis of actual student-LLM interactions, our work fills this gap. We conducted a comprehensive analysis involving 411 students from a Distributed Systems class at an Indian university, where they completed three programming assignments and shared their experiences through Google Form surveys.
Our findings reveal that students leveraged LLMs for a variety of tasks, including code generation, debugging, conceptual inquiries, and test case creation. They employed a spectrum of prompting strategies, ranging from basic contextual prompts to advanced techniques like chain-of-thought prompting and iterative refinement. While students generally viewed LLMs as beneficial for enhancing productivity and learning, we noted a concerning trend of over-reliance, with many students submitting entire assignment descriptions to obtain complete solutions. Given the increasing use of LLMs in the software industry, our study highlights the need to update undergraduate curricula to include training on effective prompting strategies and to raise awareness about the benefits and potential drawbacks of LLM usage in academic settings.
△ Less
Submitted 26 July, 2024; v1 submitted 6 April, 2024;
originally announced April 2024.
-
Fine-Tuning, Quantization, and LLMs: Navigating Unintended Outcomes
Authors:
Divyanshu Kumar,
Anurakt Kumar,
Sahil Agarwal,
Prashanth Harshangi
Abstract:
Large Language Models (LLMs) have become very popular and are used in many domains, such as chatbots, auto-task completion agents, and much more. However, LLMs suffer from many safety vulnerabilities, which can be exploited using different types of attacks, such as jailbreaking, prompt injection attacks, and privacy leakage attacks. These attacks can disrupt the working of the LLMs and make powerf…
▽ More
Large Language Models (LLMs) have become very popular and are used in many domains, such as chatbots, auto-task completion agents, and much more. However, LLMs suffer from many safety vulnerabilities, which can be exploited using different types of attacks, such as jailbreaking, prompt injection attacks, and privacy leakage attacks. These attacks can disrupt the working of the LLMs and make powerful LLM systems generate malicious or unethical content, take malicious actions, or leak confidential information by bypassing the security filters and taking advantage of their access. Foundational LLMs undergo alignment training, which includes safety training. This helps the model learn how to generate outputs that are ethical and aligned with human responses. Further, to make the models even safer, guardrails are added to filter the inputs received and the output generated by the model. These foundational LLMs are subjected to fine-tuning, quantization, or alteration of guardrails to use these models for specialized tasks or to use them in a resource-constrained environment. So, understanding the impact of modifications such as fine-tuning, quantization, and guardrails on the safety of LLM becomes an important question. Understanding and mitigating the consequences will help build reliable systems and effective strategies to make LLMs more secure. In this study, we tested foundational models like Mistral, Llama, MosaicML, and their finetuned versions. These comprehensive evaluations show that fine-tuning increases jailbreak attack success rates (ASR), quantization has a variable impact on the ASR, and guardrails can help significantly improve jailbreak resistance.
△ Less
Submitted 29 July, 2024; v1 submitted 5 April, 2024;
originally announced April 2024.
-
Geometry-induced friction at a soft interface
Authors:
Aashna Chawla,
Deepak Kumar
Abstract:
Soft and biological matter come in a variety of shapes and geometries. When soft surfaces that do not fit into each other due to a mismatch in Gaussian curvatures form an interface, beautiful geometry-induced patterns emerge. In this paper, we study the effect of geometry on the dynamical response of soft surfaces moving relative to each other. Using a novel experimental scheme, we measure frictio…
▽ More
Soft and biological matter come in a variety of shapes and geometries. When soft surfaces that do not fit into each other due to a mismatch in Gaussian curvatures form an interface, beautiful geometry-induced patterns emerge. In this paper, we study the effect of geometry on the dynamical response of soft surfaces moving relative to each other. Using a novel experimental scheme, we measure friction between a highly bendable thin polymer sheet and a hydrogel substrate. At this soft and low-friction interface, we find a strong dependence of friction on the relative geometry of the two surfaces - a flat sheet experiences significantly larger friction on a spherical substrate than on planar or cylindrical substrate. We show that the stress developed in the sheet due to its geometrically incompatible confinement is responsible for the enhanced friction. This mechanism also leads to a transition in the nature of friction as the sheet radius is increased beyond a critical value. Our finding reveals a hitherto unnoticed non-specific mechanism of purely geometrical origin that may influence friction significantly in soft, biological, and nano-scale systems. In particular, it provokes us to re-examine our understanding of phenomena such as the curvature dependence of biological cell mobility.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Automorphisms of Multiplicative Lie algebra Extensions
Authors:
Dev Karan Singh,
Shiv Datt Kumar
Abstract:
In this paper, we discuss the inducibility problem for automorphisms of multiplicative Lie algebra extensions and show that obstruction to the inducibility of pairs lies in the second cohomology group of multiplicative Lie algebras. We also establish the Wells type exact sequence for multiplicative Lie algebras, which relates automorphism groups with the second cohomology group of multiplicative L…
▽ More
In this paper, we discuss the inducibility problem for automorphisms of multiplicative Lie algebra extensions and show that obstruction to the inducibility of pairs lies in the second cohomology group of multiplicative Lie algebras. We also establish the Wells type exact sequence for multiplicative Lie algebras, which relates automorphism groups with the second cohomology group of multiplicative Lie algebras.
△ Less
Submitted 1 February, 2024;
originally announced March 2024.
-
A framework to identify supercritical and subcritical Turing bifurcations: Case study of a system sustaining cubic and quadratic autocatalysis
Authors:
Deepak Kumar,
Subramaniam Pushpavanam
Abstract:
In this work, we focus on an autocatalytic reaction-diffusion model and carry out multiple scale weakly nonlinear analysis. A cubic and a quadratic autocatalytic reaction system is analysed. We develop a framework to identify the critical surfaces in parameter space across which the nature of the Turing bifurcation changes from supercritical to subcritical. These are verified by direct numerical s…
▽ More
In this work, we focus on an autocatalytic reaction-diffusion model and carry out multiple scale weakly nonlinear analysis. A cubic and a quadratic autocatalytic reaction system is analysed. We develop a framework to identify the critical surfaces in parameter space across which the nature of the Turing bifurcation changes from supercritical to subcritical. These are verified by direct numerical simulations of the system. Using weakly nonlinear analysis, we derive equations up to the fifth order that governs the amplitude of the spatial patterns. The limit point of the bifurcating solution is captured accurately by extending the analysis to the fifth order for the case of subcritical bifurcation. The numerical solutions are in good agreement with the predictions of the weakly nonlinear analysis for supercritical bifurcations. We show that when multiple steady states arise Turing patterns can coexist with another spatially uniform steady states. Furthermore, we show that our framework can be extended to get different patterns like squares and hexagons in a two-dimensional domain. We show that the shape of Turing patterns is influenced by the domain size. This shows that the geometry can influence the kind of patterns formed in natural systems. This study will aid the experimentalist identify operating conditions where Turing patterns can be obtained.
△ Less
Submitted 2 July, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
An ensemble of data-driven weather prediction models for operational sub-seasonal forecasting
Authors:
Jonathan A. Weyn,
Divya Kumar,
Jeremy Berman,
Najeeb Kazmi,
Sylwester Klocek,
Pete Luferenko,
Kit Thambiratnam
Abstract:
We present an operations-ready multi-model ensemble weather forecasting system which uses hybrid data-driven weather prediction models coupled with the European Centre for Medium-range Weather Forecasts (ECMWF) ocean model to predict global weather at 1-degree resolution for 4 weeks of lead time. For predictions of 2-meter temperature, our ensemble on average outperforms the raw ECMWF extended-ran…
▽ More
We present an operations-ready multi-model ensemble weather forecasting system which uses hybrid data-driven weather prediction models coupled with the European Centre for Medium-range Weather Forecasts (ECMWF) ocean model to predict global weather at 1-degree resolution for 4 weeks of lead time. For predictions of 2-meter temperature, our ensemble on average outperforms the raw ECMWF extended-range ensemble by 4-17%, depending on the lead time. However, after applying statistical bias corrections, the ECMWF ensemble is about 3% better at 4 weeks. For other surface parameters, our ensemble is also within a few percentage points of ECMWF's ensemble. We demonstrate that it is possible to achieve near-state-of-the-art subseasonal-to-seasonal forecasts using a multi-model ensembling approach with data-driven weather prediction models.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Loss Regularizing Robotic Terrain Classification
Authors:
Shakti Deo Kumar,
Sudhanshu Tripathi,
Krishna Ujjwal,
Sarvada Sakshi Jha,
Suddhasil De
Abstract:
Locomotion mechanics of legged robots are suitable when pacing through difficult terrains. Recognising terrains for such robots are important to fully yoke the versatility of their movements. Consequently, robotic terrain classification becomes significant to classify terrains in real time with high accuracy. The conventional classifiers suffer from overfitting problem, low accuracy problem, high…
▽ More
Locomotion mechanics of legged robots are suitable when pacing through difficult terrains. Recognising terrains for such robots are important to fully yoke the versatility of their movements. Consequently, robotic terrain classification becomes significant to classify terrains in real time with high accuracy. The conventional classifiers suffer from overfitting problem, low accuracy problem, high variance problem, and not suitable for live dataset. On the other hand, classifying a growing dataset is difficult for convolution based terrain classification. Supervised recurrent models are also not practical for this classification. Further, the existing recurrent architectures are still evolving to improve accuracy of terrain classification based on live variable-length sensory data collected from legged robots. This paper proposes a new semi-supervised method for terrain classification of legged robots, avoiding preprocessing of long variable-length dataset. The proposed method has a stacked Long Short-Term Memory architecture, including a new loss regularization. The proposed method solves the existing problems and improves accuracy. Comparison with the existing architectures show the improvements.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Mesh-free mixed finite element approximation for nonlinear time-fractional biharmonic problem using weighted b-splines
Authors:
Jitesh P. Mandaliya,
Dileep Kumar,
Sudhakar Chaudhary
Abstract:
In this article, we propose a fully-discrete scheme for the numerical solution of a nonlinear time-fractional biharmonic problem. This problem is first converted into an equivalent system by introducing a new variable. Then spatial and temporal discretizations are done by the weighted $b$-spline method and $L2$-$1_σ$ approximation, respectively. The weighted $b$-spline method uses weighted $b$-spl…
▽ More
In this article, we propose a fully-discrete scheme for the numerical solution of a nonlinear time-fractional biharmonic problem. This problem is first converted into an equivalent system by introducing a new variable. Then spatial and temporal discretizations are done by the weighted $b$-spline method and $L2$-$1_σ$ approximation, respectively. The weighted $b$-spline method uses weighted $b$-splines on a tensor product grid as basis functions for the finite element space and by construction, it is a mesh-free method. This method combines the computational benefits of $b$-splines and standard mesh-based elements. We derive $α$-robust \emph{a priori} bound and convergence estimate in the $L^2(Ω)$ norm for the proposed scheme. Finally, we carry out few numerical experiments to support our theoretical findings.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Isomeric states of fission fragments explored via Penning trap mass spectrometry at IGISOL
Authors:
A. Jaries,
M. Stryjczyk,
A. Kankainen,
L. Al Ayoubi,
O. Beliuskina,
L. Canete,
R. P. de Groote,
C. Delafosse,
P. Delahaye,
T. Eronen,
M. Flayol,
Z. Ge,
S. Geldhof,
W. Gins,
M. Hukkanen,
P. Imgram,
D. Kahl,
J. Kostensalo,
S. Kujanpää,
D. Kumar,
I. D. Moore,
M. Mougeot,
D. A. Nesterenko,
S. Nikas,
D. Patel
, et al. (14 additional authors not shown)
Abstract:
The masses of $^{84}$Br, $^{105}$Mo, $^{115,119,121}$Pd, $^{122}$Ag, $^{127,129}$In, $^{132}$Sb and their respective isomeric states have been measured with the JYFLTRAP Penning trap mass spectrometer using the phase-imaging ion-cyclotron-resonance technique. The excitation energies of the isomeric states in $^{132}$Sb and $^{119}$Pd were experimentally determined for the first time, while for…
▽ More
The masses of $^{84}$Br, $^{105}$Mo, $^{115,119,121}$Pd, $^{122}$Ag, $^{127,129}$In, $^{132}$Sb and their respective isomeric states have been measured with the JYFLTRAP Penning trap mass spectrometer using the phase-imaging ion-cyclotron-resonance technique. The excitation energies of the isomeric states in $^{132}$Sb and $^{119}$Pd were experimentally determined for the first time, while for $^{84}$Br, $^{115}$Pd and $^{127,129}$In, the precision of the mass values was substantially improved. In $^{105}$Mo and $^{121}$Pd there were no signs of a long-lived isomeric state. The ground-state measurements of $^{119}$Pd and $^{122}$Ag indicated that both are significantly more bound than the literature values. For $^{122}$Ag, there was no indication of a proposed third long-lived state. The results for the $N=49$ nucleus $^{84}$Br and isomers close to doubly magic $^{132}$Sn have been compared to the shell-model and the microscopic quasiparticle-phonon model calculations.
△ Less
Submitted 28 April, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
Digital Quantum Simulations of Hong-Ou-Mandel Interference
Authors:
Navaneeth Krishnan Mohan,
Rikteem Bhowmick,
Devesh Kumar,
Rohit Chaurasiya
Abstract:
Digital quantum simulation is the process of simulating the dynamics of a physical system by a programmable quantum computer. The universality of quantum computers makes it possible to simulate any quantum system, whether fermionic or bosonic. In this work, we discuss the application of digital quantum simulations to simulate a ubiquitous bosonic system, a beam splitter. To perform the boson-to-qu…
▽ More
Digital quantum simulation is the process of simulating the dynamics of a physical system by a programmable quantum computer. The universality of quantum computers makes it possible to simulate any quantum system, whether fermionic or bosonic. In this work, we discuss the application of digital quantum simulations to simulate a ubiquitous bosonic system, a beam splitter. To perform the boson-to-qubit mapping, we used the gray code, whose superiority over other encoding schemes has been shown recently. We validated our quantum circuit that mimics the action of a beam splitter by simulating the Hong-Ou-Mandel interference experiment. We simulated the experiment in both quantum simulators and actual quantum backends and were able to observe the HOM interference.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
mEdIT: Multilingual Text Editing via Instruction Tuning
Authors:
Vipul Raheja,
Dimitris Alikaniotis,
Vivek Kulkarni,
Bashar Alhafni,
Dhruv Kumar
Abstract:
We introduce mEdIT, a multi-lingual extension to CoEdIT -- the recent state-of-the-art text editing models for writing assistance. mEdIT models are trained by fine-tuning multi-lingual large, pre-trained language models (LLMs) via instruction tuning. They are designed to take instructions from the user specifying the attributes of the desired text in the form of natural language instructions, such…
▽ More
We introduce mEdIT, a multi-lingual extension to CoEdIT -- the recent state-of-the-art text editing models for writing assistance. mEdIT models are trained by fine-tuning multi-lingual large, pre-trained language models (LLMs) via instruction tuning. They are designed to take instructions from the user specifying the attributes of the desired text in the form of natural language instructions, such as Grammatik korrigieren (German) or Parafrasee la oración (Spanish). We build mEdIT by curating data from multiple publicly available human-annotated text editing datasets for three text editing tasks (Grammatical Error Correction (GEC), Text Simplification, and Paraphrasing) across diverse languages belonging to six different language families. We detail the design and training of mEdIT models and demonstrate their strong performance on many multi-lingual text editing benchmarks against other multilingual LLMs. We also find that mEdIT generalizes effectively to new languages over multilingual baselines. We publicly release our data, code, and trained models at https://github.com/vipulraheja/medit.
△ Less
Submitted 17 April, 2024; v1 submitted 26 February, 2024;
originally announced February 2024.
-
The Last JITAI? The Unreasonable Effectiveness of Large Language Models in Issuing Just-in-Time Adaptive Interventions: Fostering Physical Activity in a Prospective Cardiac Rehabilitation Setting
Authors:
David Haag,
Devender Kumar,
Sebastian Gruber,
Mahdi Sareban,
Gunnar Treff,
Josef Niebauer,
Christopher Bull,
Jan David Smeddinck
Abstract:
We investigated the viability of using Large Language Models (LLMs) for triggering and personalizing content for Just-in-Time Adaptive Interventions (JITAIs) in digital health. JITAIs are being explored as a key mechanism for sustainable behavior change, adapting interventions to an individual's current context and needs. However, traditional rule-based and machine learning models for JITAI implem…
▽ More
We investigated the viability of using Large Language Models (LLMs) for triggering and personalizing content for Just-in-Time Adaptive Interventions (JITAIs) in digital health. JITAIs are being explored as a key mechanism for sustainable behavior change, adapting interventions to an individual's current context and needs. However, traditional rule-based and machine learning models for JITAI implementation face scalability and flexibility limitations, such as lack of personalization, difficulty in managing multi-parametric systems, and issues with data sparsity. To investigate JITAI implementation via LLMs, we tested the contemporary overall performance-leading model 'GPT-4' with examples grounded in the use case of fostering heart-healthy physical activity in outpatient cardiac rehabilitation. Three personas and five sets of context information per persona were used as a basis of triggering and personalizing JITAIs. Subsequently, we generated a total of 450 proposed JITAI decisions and message content, divided equally into JITAIs generated by 10 iterations with GPT-4, a baseline provided by 10 laypersons (LayPs), and a gold standard set by 10 healthcare professionals (HCPs). Ratings from 27 LayPs and 11 HCPs indicated that JITAIs generated by GPT-4 were superior to those by HCPs and LayPs over all assessed scales: i.e., appropriateness, engagement, effectiveness, and professionality. This study indicates that LLMs have significant potential for implementing JITAIs as a building block of personalized or "precision" health, offering scalability, effective personalization based on opportunistically sampled information, and good acceptability.
△ Less
Submitted 15 April, 2024; v1 submitted 13 February, 2024;
originally announced February 2024.
-
Personalized Text Generation with Fine-Grained Linguistic Control
Authors:
Bashar Alhafni,
Vivek Kulkarni,
Dhruv Kumar,
Vipul Raheja
Abstract:
As the text generation capabilities of large language models become increasingly prominent, recent studies have focused on controlling particular aspects of the generated text to make it more personalized. However, most research on controllable text generation focuses on controlling the content or modeling specific high-level/coarse-grained attributes that reflect authors' writing styles, such as…
▽ More
As the text generation capabilities of large language models become increasingly prominent, recent studies have focused on controlling particular aspects of the generated text to make it more personalized. However, most research on controllable text generation focuses on controlling the content or modeling specific high-level/coarse-grained attributes that reflect authors' writing styles, such as formality, domain, or sentiment. In this paper, we focus on controlling fine-grained attributes spanning multiple linguistic dimensions, such as lexical and syntactic attributes. We introduce a novel benchmark to train generative models and evaluate their ability to generate personalized text based on multiple fine-grained linguistic attributes. We systematically investigate the performance of various large language models on our benchmark and draw insights from the factors that impact their performance. We make our code, data, and pretrained models publicly available.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
The footprint of nuclear saturation properties on the neutron star $f$ mode oscillation frequencies: a machine learning approach
Authors:
Deepak Kumar,
Tuhin Malik,
Hiranmaya Mishra
Abstract:
We investigate the intricate relationships between the non-radial \(f\) mode oscillation frequencies of neutron stars (NS)s and the corresponding nuclear matter equation of state (EOS) using a machine learning (ML) approach within the ambit of the relativistic mean field (RMF) framework for nuclear matter. With two distinct parameterizations of the Walecka model, namely, (1) with non-linear self i…
▽ More
We investigate the intricate relationships between the non-radial \(f\) mode oscillation frequencies of neutron stars (NS)s and the corresponding nuclear matter equation of state (EOS) using a machine learning (ML) approach within the ambit of the relativistic mean field (RMF) framework for nuclear matter. With two distinct parameterizations of the Walecka model, namely, (1) with non-linear self interactions of the scalar field (NL) and, (2) a density dependent Bayesian model (DDB), we perform a thorough examination of the \(f\) mode frequency in relation to various nuclear saturation properties. The correlations between the \(f\) mode frequencies and nuclear saturation properties reveal, through various analytical and ML methods, the complex nature of NSs and their potential as the cosmic laboratory for studying extreme states of matter. A principal component analysis (PCA) has been performed using mixed datasets from DDB and NL models to discriminate the relative importance of the different components of the EOS on the $f$ mode frequencies. Additionally, a {\it Random forest feature importance} analysis also elucidates the distinct roles of these properties in determining the \(f\) mode frequency across a spectrum of NS masses. Our findings are further supported by symbolic regression searches, yielding high-accuracy relations with strong Pearson coefficients and minimal errors. These relations suggest new methodologies for probing NS core characteristics, such as energy density, pressure, and speed of sound from observations of non-radial \(f\) mode oscillations of NSs.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Search for a heavy neutral lepton that mixes predominantly with the tau neutrino
Authors:
Belle Collaboration,
M. Nayak,
S. Dey,
A. Soffer,
I. Adachi,
H. Aihara,
S. Al Said,
D. M. Asner,
H. Atmacan,
R. Ayad,
V. Babu,
Sw. Banerjee,
M. Bauer,
P. Behera,
K. Belous,
M. Bessner,
V. Bhardwaj,
B. Bhuyan,
T. Bilka,
D. Biswas,
A. Bobrov,
D. Bodrov,
M. Bračko,
P. Branchini,
T. E. Browder
, et al. (143 additional authors not shown)
Abstract:
We report a search for a heavy neutral lepton (HNL) that mixes predominantly with $ν_τ$. The search utilizes data collected with the Belle detector at the KEKB asymmetric energy $e^+ e^-$ collider. The data sample was collected at and just below the center-of-mass energies of the $Υ(4S)$ and $Υ(5S)$ resonances and has an integrated luminosity of $915~\textrm{fb}^{-1}$, corresponding to…
▽ More
We report a search for a heavy neutral lepton (HNL) that mixes predominantly with $ν_τ$. The search utilizes data collected with the Belle detector at the KEKB asymmetric energy $e^+ e^-$ collider. The data sample was collected at and just below the center-of-mass energies of the $Υ(4S)$ and $Υ(5S)$ resonances and has an integrated luminosity of $915~\textrm{fb}^{-1}$, corresponding to $(836\pm 12)\times 10^6$ $e^+e^\toτ^+τ^-$ events. We search for production of the HNL (denoted $N$) in the decay $τ^-\to π^- N$ followed by its decay via $N \to μ^+μ^- ν_τ$. The search focuses on the parameter-space region in which the HNL is long lived, so that the $μ^+μ^-$ originate from a common vertex that is significantly displaced from the collision point of the KEKB beams. Consistent with the expected background yield, one event is observed in the data sample after application of all the event-selection criteria. We report limits on the mixing parameter of the HNL with the $τ$ neutrino as a function of the HNL mass.
△ Less
Submitted 14 June, 2024; v1 submitted 4 February, 2024;
originally announced February 2024.
-
"Which LLM should I use?": Evaluating LLMs for tasks performed by Undergraduate Computer Science Students
Authors:
Vibhor Agarwal,
Madhav Krishan Garg,
Sahiti Dharmavaram,
Dhruv Kumar
Abstract:
This study evaluates the effectiveness of various large language models (LLMs) in performing tasks common among undergraduate computer science students. Although a number of research studies in the computing education community have explored the possibility of using LLMs for a variety of tasks, there is a lack of comprehensive research comparing different LLMs and evaluating which LLMs are most ef…
▽ More
This study evaluates the effectiveness of various large language models (LLMs) in performing tasks common among undergraduate computer science students. Although a number of research studies in the computing education community have explored the possibility of using LLMs for a variety of tasks, there is a lack of comprehensive research comparing different LLMs and evaluating which LLMs are most effective for different tasks. Our research systematically assesses some of the publicly available LLMs such as Google Bard, ChatGPT(3.5), GitHub Copilot Chat, and Microsoft Copilot across diverse tasks commonly encountered by undergraduate computer science students in India. These tasks include code explanation and documentation, solving class assignments, technical interview preparation, learning new concepts and frameworks, and email writing. Evaluation for these tasks was carried out by pre-final year and final year undergraduate computer science students and provides insights into the models' strengths and limitations. This study aims to guide students as well as instructors in selecting suitable LLMs for any specific task and offers valuable insights on how LLMs can be used constructively by students and instructors.
△ Less
Submitted 3 April, 2024; v1 submitted 22 January, 2024;
originally announced February 2024.
-
algoXSSF: Detection and analysis of cross-site request forgery (XSRF) and cross-site scripting (XSS) attacks via Machine learning algorithms
Authors:
Naresh Kshetri,
Dilip Kumar,
James Hutson,
Navneet Kaur,
Omar Faruq Osama
Abstract:
The global rise of online users and online devices has ultimately given rise to the global internet population apart from several cybercrimes and cyberattacks. The combination of emerging new technology and powerful algorithms (of Artificial Intelligence, Deep Learning, and Machine Learning) is needed to counter defense web security including attacks on several search engines and websites. The unp…
▽ More
The global rise of online users and online devices has ultimately given rise to the global internet population apart from several cybercrimes and cyberattacks. The combination of emerging new technology and powerful algorithms (of Artificial Intelligence, Deep Learning, and Machine Learning) is needed to counter defense web security including attacks on several search engines and websites. The unprecedented increase rate of cybercrime and website attacks urged for new technology consideration to protect data and information online. There have been recent and continuous cyberattacks on websites, web domains with ongoing data breaches including - GitHub account hack, data leaks on Twitter, malware in WordPress plugins, vulnerability in Tomcat server to name just a few. We have investigated with an in-depth study apart from the detection and analysis of two major cyberattacks (although there are many more types): cross-site request forgery (XSRF) and cross-site scripting (XSS) attacks. The easy identification of cyber trends and patterns with continuous improvement is possible within the edge of machine learning and AI algorithms. The use of machine learning algorithms would be extremely helpful to counter (apart from detection) the XSRF and XSS attacks. We have developed the algorithm and cyber defense framework - algoXSSF with machine learning algorithms embedded to combat malicious attacks (including Man-in-the-Middle attacks) on websites for detection and analysis.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Navigating the Unknown: Uncertainty-Aware Compute-in-Memory Autonomy of Edge Robotics
Authors:
Nastaran Darabi,
Priyesh Shukla,
Dinithi Jayasuriya,
Divake Kumar,
Alex C. Stutts,
Amit Ranjan Trivedi
Abstract:
This paper addresses the challenging problem of energy-efficient and uncertainty-aware pose estimation in insect-scale drones, which is crucial for tasks such as surveillance in constricted spaces and for enabling non-intrusive spatial intelligence in smart homes. Since tiny drones operate in highly dynamic environments, where factors like lighting and human movement impact their predictive accura…
▽ More
This paper addresses the challenging problem of energy-efficient and uncertainty-aware pose estimation in insect-scale drones, which is crucial for tasks such as surveillance in constricted spaces and for enabling non-intrusive spatial intelligence in smart homes. Since tiny drones operate in highly dynamic environments, where factors like lighting and human movement impact their predictive accuracy, it is crucial to deploy uncertainty-aware prediction algorithms that can account for environmental variations and express not only the prediction but also confidence in the prediction. We address both of these challenges with Compute-in-Memory (CIM) which has become a pivotal technology for deep learning acceleration at the edge. While traditional CIM techniques are promising for energy-efficient deep learning, to bring in the robustness of uncertainty-aware predictions at the edge, we introduce a suite of novel techniques: First, we discuss CIM-based acceleration of Bayesian filtering methods uniquely by leveraging the Gaussian-like switching current of CMOS inverters along with co-design of kernel functions to operate with extreme parallelism and with extreme energy efficiency. Secondly, we discuss the CIM-based acceleration of variational inference of deep learning models through probabilistic processing while unfolding iterative computations of the method with a compute reuse strategy to significantly minimize the workload. Overall, our co-design methodologies demonstrate the potential of CIM to improve the processing efficiency of uncertainty-aware algorithms by orders of magnitude, thereby enabling edge robotics to access the robustness of sophisticated prediction frameworks within their extremely stringent area/power resources.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
AI as a Medical Ally: Evaluating ChatGPT's Usage and Impact in Indian Healthcare
Authors:
Aryaman Raina,
Prateek Mishra,
Harshit goyal,
Dhruv Kumar
Abstract:
This study investigates the integration and impact of Large Language Models (LLMs), like ChatGPT, in India's healthcare sector. Our research employs a dual approach, engaging both general users and medical professionals through surveys and interviews respectively. Our findings reveal that healthcare professionals value ChatGPT in medical education and preliminary clinical settings, but exercise ca…
▽ More
This study investigates the integration and impact of Large Language Models (LLMs), like ChatGPT, in India's healthcare sector. Our research employs a dual approach, engaging both general users and medical professionals through surveys and interviews respectively. Our findings reveal that healthcare professionals value ChatGPT in medical education and preliminary clinical settings, but exercise caution due to concerns about reliability, privacy, and the need for cross-verification with medical references. General users show a preference for AI interactions in healthcare, but concerns regarding accuracy and trust persist. The study underscores the need for these technologies to complement, not replace, human medical expertise, highlighting the importance of developing LLMs in collaboration with healthcare providers. This paper enhances the understanding of LLMs in healthcare, detailing current usage, user trust, and improvement areas. Our insights inform future research and development, underscoring the need for ethically compliant, user-focused LLM advancements that address healthcare-specific challenges.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.