-
Convergence Analysis of Overparametrized LQR Formulations
Authors:
Arthur Castello B. de Oliveira,
Milad Siami,
Eduardo D. Sontag
Abstract:
Motivated by the growing use of Artificial Intelligence (AI) tools in control design, this paper takes the first steps towards bridging the gap between results from Direct Gradient methods for the Linear Quadratic Regulator (LQR), and neural networks. More specifically, it looks into the case where one wants to find a Linear Feed-Forward Neural Network (LFFNN) feedback that minimizes a LQR cost. T…
▽ More
Motivated by the growing use of Artificial Intelligence (AI) tools in control design, this paper takes the first steps towards bridging the gap between results from Direct Gradient methods for the Linear Quadratic Regulator (LQR), and neural networks. More specifically, it looks into the case where one wants to find a Linear Feed-Forward Neural Network (LFFNN) feedback that minimizes a LQR cost. This paper starts by computing the gradient formulas for the parameters of each layer, which are used to derive a key conservation law of the system. This conservation law is then leveraged to prove boundedness and global convergence of solutions to critical points, and invariance of the set of stabilizing networks under the training dynamics. This is followed by an analysis of the case where the LFFNN has a single hidden layer. For this case, the paper proves that the training converges not only to critical points but to the optimal feedback control law for all but a set of measure-zero of the initializations. These theoretical results are followed by an extensive analysis of a simple version of the problem (the ``vector case''), proving the theoretical properties of accelerated convergence and robustness for this simpler example. Finally, the paper presents numerical evidence of faster convergence of the training of general LFFNNs when compared to traditional direct gradient methods, showing that the acceleration of the solution is observable even when the gradient is not explicitly computed but estimated from evaluations of the cost function.
△ Less
Submitted 27 August, 2024;
originally announced August 2024.
-
Regularizing Numerical Extremals Along Singular Arcs: A Lie-Theoretic Approach
Authors:
Arthur Castello Branco de Oliveira,
Milad Siami,
Eduardo D. Sontag
Abstract:
Numerical ``direct'' approaches to time-optimal control often fail to find solutions that are singular in the sense of the Pontryagin Maximum Principle, performing better when searching for saturated (bang-bang) solutions. In previous work by one of the authors, singular solutions were shown to exist for the time-optimal control problem for fully actuated mechanical systems under hard torque const…
▽ More
Numerical ``direct'' approaches to time-optimal control often fail to find solutions that are singular in the sense of the Pontryagin Maximum Principle, performing better when searching for saturated (bang-bang) solutions. In previous work by one of the authors, singular solutions were shown to exist for the time-optimal control problem for fully actuated mechanical systems under hard torque constraints. Explicit formulas, based on a Lie theoretic analysis of the problem, were given for singular segments of trajectories, but the global structure of solutions remains unknown. In this work, we review the aforementioned framework, and show how to effectively combine these formulas with the use of general-purpose optimal control software packages. By using the explicit formula given by the theory in the intervals where the numerical solution enters a singular arc, we not only obtain an algebraic expression for the control in that interval but we are also able to remove artifacts present in the numerical solution. In this way, the best features of numerical algorithms and theory complement each other and provide a better picture of the global optimal structure. We illustrate the technique on a two degree of freedom robotic arm example, using two distinct optimal control numerical software packages running on different programming languages.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Search for reactor-produced millicharged particles with Skipper-CCDs at the CONNIE and Atucha-II experiments
Authors:
Alexis A. Aguilar-Arevalo,
Nicolas Avalos,
Pablo Bellino,
Xavier Bertou,
Carla Bonifazi,
Ana Botti,
Mariano Cababié,
Gustavo Cancelo,
Brenda A. Cervantes-Vergara,
Claudio Chavez,
Fernando Chierchie,
David Delgado,
Eliana Depaoli,
Juan Carlos D'Olivo,
João dos Anjos,
Juan Estrada,
Guillermo Fernandez Moroni,
Aldo R. Fernandes Neto,
Richard Ford,
Ben Kilminster,
Kevin Kuk,
Andrew Lathrop,
Patrick Lemos,
Herman P. Lima Jr.,
Martin Makler
, et al. (15 additional authors not shown)
Abstract:
Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross-section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CON…
▽ More
Millicharged particles, proposed by various extensions of the standard model, can be created in pairs by high-energy photons within nuclear reactors and can interact electromagnetically with electrons in matter. Recently, the existence of a plasmon peak in the interaction cross-section with silicon in the eV range was highlighted as a promising approach to enhance low-energy sensitivities. The CONNIE and Atucha-II reactor neutrino experiments utilize Skipper-CCD sensors, which enable the detection of interactions in the eV range. We present world-leading limits on the charge of millicharged particles within a mass range spanning six orders of magnitude, derived through a comprehensive analysis and the combination of data from both experiments.
△ Less
Submitted 25 May, 2024;
originally announced May 2024.
-
Exploring the limitations of blood pressure estimation using the photoplethysmography signal
Authors:
Felipe M. Dias,
Diego A. C. Cardenas,
Marcelo A. F. Toledo,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Hypertension, a leading contributor to cardiovascular morbidity, underscores the need for accurate and continuous blood pressure (BP) monitoring. Photoplethysmography (PPG) presents a promising approach to this end. However, the precision of BP estimates derived from PPG signals has been the subject of ongoing debate, necessitating a comprehensive evaluation of their effectiveness and constraints.…
▽ More
Hypertension, a leading contributor to cardiovascular morbidity, underscores the need for accurate and continuous blood pressure (BP) monitoring. Photoplethysmography (PPG) presents a promising approach to this end. However, the precision of BP estimates derived from PPG signals has been the subject of ongoing debate, necessitating a comprehensive evaluation of their effectiveness and constraints. We developed a calibration-based Siamese ResNet model for BP estimation, using a signal input paired with a reference BP reading. We compared the use of normalized PPG (N-PPG) against the normalized Invasive Arterial Blood Pressure (N-IABP) signals as input. The N-IABP signals do not directly present systolic and diastolic values but theoretically provide a more accurate BP measure than PPG signals since it is a direct pressure sensor inside the body. Our strategy establishes a critical benchmark for PPG performance, realistically calibrating expectations for PPG's BP estimation capabilities. Nonetheless, we compared the performance of our models using different signal-filtering conditions to evaluate the impact of filtering on the results. We evaluated our method using the AAMI and the BHS standards employing the VitalDB dataset. The N-IABP signals meet with AAMI standards for both Systolic Blood Pressure (SBP) and Diastolic Blood Pressure (DBP), with errors of 1.29+-6.33mmHg for systolic pressure and 1.17+-5.78mmHg for systolic and diastolic pressure respectively for the raw N-IABP signal. In contrast, N-PPG signals, in their best setup, exhibited inferior performance than N-IABP, presenting 1.49+-11.82mmHg and 0.89+-7.27mmHg for systolic and diastolic pressure respectively. Our findings highlight the potential and limitations of employing PPG for BP estimation, showing that these signals contain information correlated to BP but may not be sufficient for predicting it accurately.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Searches for CEνNS and Physics beyond the Standard Model using Skipper-CCDs at CONNIE
Authors:
Alexis A. Aguilar-Arevalo,
Nicolas Avalos,
Xavier Bertou,
Carla Bonifazi,
Gustavo Cancelo,
Brenda A. Cervantes-Vergara,
Claudio Chavez,
Fernando Chierchie,
Gustavo Coelho Corrêa,
Juan Carlos D'Olivo,
João dos Anjos,
Juan Estrada,
Guillermo Fernandez Moroni,
Aldo R. Fernandes Neto,
Richard Ford,
Ben Kilminster,
Kevin Kuk,
Andrew Lathrop,
Patrick Lemos,
Herman P. Lima Jr.,
Martin Makler,
Katherine Maslova,
Franciole Marinho,
Jorge Molina,
Irina Nasteva
, et al. (9 additional authors not shown)
Abstract:
The Coherent Neutrino-Nucleus Interaction Experiment (CONNIE) aims to detect the coherent scattering (CE$ν$NS) of reactor antineutrinos off silicon nuclei using thick fully-depleted high-resistivity silicon CCDs. Two Skipper-CCD sensors with sub-electron readout noise capability were installed at the experiment next to the Angra-2 reactor in 2021, making CONNIE the first experiment to employ Skipp…
▽ More
The Coherent Neutrino-Nucleus Interaction Experiment (CONNIE) aims to detect the coherent scattering (CE$ν$NS) of reactor antineutrinos off silicon nuclei using thick fully-depleted high-resistivity silicon CCDs. Two Skipper-CCD sensors with sub-electron readout noise capability were installed at the experiment next to the Angra-2 reactor in 2021, making CONNIE the first experiment to employ Skipper-CCDs for reactor neutrino detection. We report on the performance of the Skipper-CCDs, the new data processing and data quality selection techniques and the event selection for CE$ν$NS interactions, which enable CONNIE to reach a record low detection threshold of 15 eV. The data were collected over 300 days in 2021-2022 and correspond to exposures of 14.9 g-days with the reactor-on and 3.5 g-days with the reactor-off. The difference between the reactor-on and off event rates shows no excess and yields upper limits at 95% confidence level for the neutrino interaction rates comparable with previous CONNIE limits from standard CCDs and higher exposures. Searches for new neutrino interactions beyond the Standard Model were performed, yielding an improvement on the previous CONNIE limit on a simplified model with light vector mediators. A first dark matter (DM) search by diurnal modulation was performed by CONNIE and the results represent the best limits on the DM-electron scattering cross-section, obtained by a surface-level experiment. These promising results, obtained using a very small-mass sensor, illustrate the potential of Skipper-CCDs to probe rare neutrino interactions and motivate the plans to increase the detector mass in the near future.
△ Less
Submitted 23 March, 2024;
originally announced March 2024.
-
Comment on "Continuous simultaneous measurement of position and momentum of a particle"
Authors:
Adélcio C. Oliveira
Abstract:
In a recent paper, [Gampel, F. and Gajda, M., Phys. Rev. A 107, 012420, (2023)], the authors claimed they are proposing a new model to explain the existence of classical trajectories in the quantum domain. The idea is based on simultaneous position and momentum measurements and a "jump Markov process". Consequently, they have interpreted the emergence of classical trajectories as sets of detection…
▽ More
In a recent paper, [Gampel, F. and Gajda, M., Phys. Rev. A 107, 012420, (2023)], the authors claimed they are proposing a new model to explain the existence of classical trajectories in the quantum domain. The idea is based on simultaneous position and momentum measurements and a "jump Markov process". Consequently, they have interpreted the emergence of classical trajectories as sets of detection events. They successfully implemented the model for a free particle and for one under a harmonic potential. Here, we show that the continuous observation limit is a realization of a coherent semiclassical expansion; Also, as has already been demonstrated, the jump process is not necessary and is not observable. In other words, the collapse, as they propose, is a non-go theorem; even if it is real, it can not be measured under the needed assumptions to obtain Newtonian classical dynamics.
△ Less
Submitted 11 November, 2023;
originally announced November 2023.
-
A machine-learning sleep-wake classification model using a reduced number of features derived from photoplethysmography and activity signals
Authors:
Douglas A. Almeida,
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Sleep is a crucial aspect of our overall health and well-being. It plays a vital role in regulating our mental and physical health, impacting our mood, memory, and cognitive function to our physical resilience and immune system. The classification of sleep stages is a mandatory step to assess sleep quality, providing the metrics to estimate the quality of sleep and how well our body is functioning…
▽ More
Sleep is a crucial aspect of our overall health and well-being. It plays a vital role in regulating our mental and physical health, impacting our mood, memory, and cognitive function to our physical resilience and immune system. The classification of sleep stages is a mandatory step to assess sleep quality, providing the metrics to estimate the quality of sleep and how well our body is functioning during this essential period of rest. Photoplethysmography (PPG) has been demonstrated to be an effective signal for sleep stage inference, meaning it can be used on its own or in a combination with others signals to determine sleep stage. This information is valuable in identifying potential sleep issues and developing strategies to improve sleep quality and overall health. In this work, we present a machine learning sleep-wake classification model based on the eXtreme Gradient Boosting (XGBoost) algorithm and features extracted from PPG signal and activity counts. The performance of our method was comparable to current state-of-the-art methods with a Sensitivity of 91.15 $\pm$ 1.16%, Specificity of 53.66 $\pm$ 1.12%, F1-score of 83.88 $\pm$ 0.56%, and Kappa of 48.0 $\pm$ 0.86%. Our method offers a significant improvement over other approaches as it uses a reduced number of features, making it suitable for implementation in wearable devices that have limited computational power.
△ Less
Submitted 7 August, 2023;
originally announced August 2023.
-
A Polystore Architecture Using Knowledge Graphs to Support Queries on Heterogeneous Data Stores
Authors:
Leonardo Guerreiro Azevedo,
Renan Francisco Santos Souza,
Elton F. de S. Soares,
Raphael M. Thiago,
Julio Cesar Cardoso Tesolin,
Ann C. Oliveira,
Marcio Ferreira Moreno
Abstract:
Modern applications commonly need to manage dataset types composed of heterogeneous data and schemas, making it difficult to access them in an integrated way. A single data store to manage heterogeneous data using a common data model is not effective in such a scenario, which results in the domain data being fragmented in the data stores that best fit their storage and access requirements (e.g., N…
▽ More
Modern applications commonly need to manage dataset types composed of heterogeneous data and schemas, making it difficult to access them in an integrated way. A single data store to manage heterogeneous data using a common data model is not effective in such a scenario, which results in the domain data being fragmented in the data stores that best fit their storage and access requirements (e.g., NoSQL, relational DBMS, or HDFS). Besides, organization workflows independently consume these fragments, and usually, there is no explicit link among the fragments that would be useful to support an integrated view. The research challenge tackled by this work is to provide the means to query heterogeneous data residing on distinct data repositories that are not explicitly connected. We propose a federated database architecture by providing a single abstract global conceptual schema to users, allowing them to write their queries, encapsulating data heterogeneity, location, and linkage by employing: (i) meta-models to represent the global conceptual schema, the remote data local conceptual schemas, and mappings among them; (ii) provenance to create explicit links among the consumed and generated data residing in separate datasets. We evaluated the architecture through its implementation as a polystore service, following a microservice architecture approach, in a scenario that simulates a real case in Oil \& Gas industry. Also, we compared the proposed architecture to a relational multidatabase system based on foreign data wrappers, measuring the user's cognitive load to write a query (or query complexity) and the query processing time. The results demonstrated that the proposed architecture allows query writing two times less complex than the one written for the relational multidatabase system, adding an excess of no more than 30% in query processing time.
△ Less
Submitted 15 March, 2024; v1 submitted 7 August, 2023;
originally announced August 2023.
-
Machine Learning-Based Diabetes Detection Using Photoplethysmography Signal Features
Authors:
Filipe A. C. Oliveira,
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Douglas A. Almeida,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Diabetes is a prevalent chronic condition that compromises the health of millions of people worldwide. Minimally invasive methods are needed to prevent and control diabetes but most devices for measuring glucose levels are invasive and not amenable for continuous monitoring. Here, we present an alternative method to overcome these shortcomings based on non-invasive optical photoplethysmography (PP…
▽ More
Diabetes is a prevalent chronic condition that compromises the health of millions of people worldwide. Minimally invasive methods are needed to prevent and control diabetes but most devices for measuring glucose levels are invasive and not amenable for continuous monitoring. Here, we present an alternative method to overcome these shortcomings based on non-invasive optical photoplethysmography (PPG) for detecting diabetes. We classify non-Diabetic and Diabetic patients using the PPG signal and metadata for training Logistic Regression (LR) and eXtreme Gradient Boosting (XGBoost) algorithms. We used PPG signals from a publicly available dataset. To prevent overfitting, we divided the data into five folds for cross-validation. By ensuring that patients in the training set are not in the testing set, the model's performance can be evaluated on unseen subjects' data, providing a more accurate assessment of its generalization. Our model achieved an F1-Score and AUC of $58.8\pm20.0\%$ and $79.2\pm15.0\%$ for LR and $51.7\pm16.5\%$ and $73.6\pm17.0\%$ for XGBoost, respectively. Feature analysis suggested that PPG morphological features contains diabetes-related information alongside metadata. Our findings are within the same range reported in the literature, indicating that machine learning methods are promising for developing remote, non-invasive, and continuous measurement devices for detecting and preventing diabetes.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Quality Assessment of Photoplethysmography Signals For Cardiovascular Biomarkers Monitoring Using Wearable Devices
Authors:
Felipe M. Dias,
Marcelo A. F. Toledo,
Diego A. C. Cardenas,
Douglas A. Almeida,
Filipe A. C. Oliveira,
Estela Ribeiro,
Jose E. Krieger,
Marco A. Gutierrez
Abstract:
Photoplethysmography (PPG) is a non-invasive technology that measures changes in blood volume in the microvascular bed of tissue. It is commonly used in medical devices such as pulse oximeters and wrist worn heart rate monitors to monitor cardiovascular hemodynamics. PPG allows for the assessment of parameters (e.g., heart rate, pulse waveform, and peripheral perfusion) that can indicate condition…
▽ More
Photoplethysmography (PPG) is a non-invasive technology that measures changes in blood volume in the microvascular bed of tissue. It is commonly used in medical devices such as pulse oximeters and wrist worn heart rate monitors to monitor cardiovascular hemodynamics. PPG allows for the assessment of parameters (e.g., heart rate, pulse waveform, and peripheral perfusion) that can indicate conditions such as vasoconstriction or vasodilation, and provides information about microvascular blood flow, making it a valuable tool for monitoring cardiovascular health. However, PPG is subject to a number of sources of variations that can impact its accuracy and reliability, especially when using a wearable device for continuous monitoring, such as motion artifacts, skin pigmentation, and vasomotion. In this study, we extracted 27 statistical features from the PPG signal for training machine-learning models based on gradient boosting (XGBoost and CatBoost) and Random Forest (RF) algorithms to assess quality of PPG signals that were labeled as good or poor quality. We used the PPG time series from a publicly available dataset and evaluated the algorithm s performance using Sensitivity (Se), Positive Predicted Value (PPV), and F1-score (F1) metrics. Our model achieved Se, PPV, and F1-score of 94.4, 95.6, and 95.0 for XGBoost, 94.7, 95.9, and 95.3 for CatBoost, and 93.7, 91.3 and 92.5 for RF, respectively. Our findings are comparable to state-of-the-art reported in the literature but using a much simpler model, indicating that ML models are promising for developing remote, non-invasive, and continuous measurement devices.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Heterophased grain boundary-rich superparamagnetic Iron Oxides/carbon composite for Cationic and Anionic Dye Removal
Authors:
K Priyananda Singh,
Boris Wareppam,
Raghavendra K G,
N. Joseph Singh,
A. C. de Oliveira,
V. K. Garg,
Subrata Ghosh,
L. Herojit Singh
Abstract:
Iron oxide-based nanostructures receive significant attention as an efficient adsorbent for organic dyes removal. The removal properties have strong dependency on the stoichiometry, phases, reactive edges, defect states etc present in the iron-oxides nanostructures. Herein, iron oxide/carbon composite with well-defined heterophased grain boundaries is synthesized by simple precipitation method and…
▽ More
Iron oxide-based nanostructures receive significant attention as an efficient adsorbent for organic dyes removal. The removal properties have strong dependency on the stoichiometry, phases, reactive edges, defect states etc present in the iron-oxides nanostructures. Herein, iron oxide/carbon composite with well-defined heterophased grain boundaries is synthesized by simple precipitation method and followed by calcination. The local structure, spin dynamics and magnetic properties of heterophased iron oxides/carbon composite are thoroughly investigated to explore its cationic and anionic dye removal capability. To validate the effectivity of the presence of heterogeneous grain boundaries, iron oxide/carbon nanocomposite with homogeneous grain boundaries is also examined. It was found that the hetero-phased iron oxide/carbon showed removal capacity of 35.45 mg g-1 and 45.84 mg g-1 for cationic (Crystal Violet) and anionic (Congo Red) dyes, respectively as compared to that of as-synthesised imidazole-capped superparamagnetic α-Fe2O3 (25.11 mg g-1 and 40.44 mg g-1, respectively) and homophased iron oxide/carbon nanocomposite (9.41 mg g-1 and 5.43 mg g-1, respectively). The plausible mechanism on the local structural evolution of the heterophase in the course of calcination and increase of the removal capacity is discussed. A detailed dye adsorption investigation is presented including the adsorption kinetic study. The pseudo-second order kinetic model is found to be an appropriate one and suggests that the chemisorption is dominant factor leading to adsorption of dyes. Whereas Weber-Morris model indicate the strong influence of boundary layers of nanocomposite on the adsorption process.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
On the ISS Property of the Gradient Flow for Single Hidden-Layer Neural Networks with Linear Activations
Authors:
Arthur Castello B. de Oliveira,
Milad Siami,
Eduardo D. Sontag
Abstract:
Recent research in neural networks and machine learning suggests that using many more parameters than strictly required by the initial complexity of a regression problem can result in more accurate or faster-converging models -- contrary to classical statistical belief. This phenomenon, sometimes known as ``benign overfitting'', raises questions regarding in what other ways might overparameterizat…
▽ More
Recent research in neural networks and machine learning suggests that using many more parameters than strictly required by the initial complexity of a regression problem can result in more accurate or faster-converging models -- contrary to classical statistical belief. This phenomenon, sometimes known as ``benign overfitting'', raises questions regarding in what other ways might overparameterization affect the properties of a learning problem. In this work, we investigate the effects of overfitting on the robustness of gradient-descent training when subject to uncertainty on the gradient estimation. This uncertainty arises naturally if the gradient is estimated from noisy data or directly measured. Our object of study is a linear neural network with a single, arbitrarily wide, hidden layer and an arbitrary number of inputs and outputs. In this paper we solve the problem for the case where the input and output of our neural-network are one-dimensional, deriving sufficient conditions for robustness of our system based on necessary and sufficient conditions for convergence in the undisturbed case. We then show that the general overparametrized formulation introduces a set of spurious equilibria which lay outside the set where the loss function is minimized, and discuss directions of future work that might extend our current results for more general formulations.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Optimizing Connectivity through Network Gradients for Restricted Boltzmann Machines
Authors:
A. C. N. de Oliveira,
D. R. Figueiredo
Abstract:
Leveraging sparse networks to connect successive layers in deep neural networks has recently been shown to provide benefits to large scale state-of-the-art models. However, network connectivity also plays a significant role on the learning performance of shallow networks, such as the classic Restricted Boltzmann Machines (RBM). Efficiently finding sparse connectivity patterns that improve the lear…
▽ More
Leveraging sparse networks to connect successive layers in deep neural networks has recently been shown to provide benefits to large scale state-of-the-art models. However, network connectivity also plays a significant role on the learning performance of shallow networks, such as the classic Restricted Boltzmann Machines (RBM). Efficiently finding sparse connectivity patterns that improve the learning performance of shallow networks is a fundamental problem. While recent principled approaches explicitly include network connections as model parameters that must be optimized, they often rely on explicit penalization or have network sparsity as a hyperparameter. This work presents the Network Connectivity Gradients (NCG), a method to find optimal connectivity patterns for RBMs based on the idea of network gradients: computing the gradient of every possible connection, given a specific connection pattern, and using the gradient to drive a continuous connection strength parameter that in turn is used to determine the connection pattern. Thus, learning RBM parameters and learning network connections is truly jointly performed, albeit with different learning rates, and without changes to the model's classic objective function. The method is applied to the MNIST and other data sets showing that better RBM models are found for the benchmark tasks of sample generation and input classification. Results also show that NCG is robust to network initialization, both adding and removing network connections while learning.
△ Less
Submitted 3 December, 2022; v1 submitted 14 September, 2022;
originally announced September 2022.
-
IceCube search for neutrinos coincident with gravitational wave events from LIGO/Virgo run O3
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Asali,
Y. Ashida,
S. Athanasiadou,
S. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty
, et al. (357 additional authors not shown)
Abstract:
Using data from the IceCube Neutrino Observatory, we searched for high-energy neutrino emission from the gravitational-wave events detected by advanced LIGO and Virgo detectors during their third observing run. We did a low-latency follow-up on the public candidate events released during the detectors' third observing run and an archival search on the 80 confident events reported in GWTC-2.1 and G…
▽ More
Using data from the IceCube Neutrino Observatory, we searched for high-energy neutrino emission from the gravitational-wave events detected by advanced LIGO and Virgo detectors during their third observing run. We did a low-latency follow-up on the public candidate events released during the detectors' third observing run and an archival search on the 80 confident events reported in GWTC-2.1 and GWTC-3 catalogs. An extended search was also conducted for neutrino emission on longer timescales from neutron star containing mergers. Follow-up searches on the candidate optical counterpart of GW190521 were also conducted. We used two methods; an unbinned maximum likelihood analysis and a Bayesian analysis using astrophysical priors, both of which were previously used to search for high-energy neutrino emission from gravitational-wave events. No significant neutrino emission was observed by any analysis and upper limits were placed on the time-integrated neutrino flux as well as the total isotropic equivalent energy emitted in high-energy neutrinos.
△ Less
Submitted 17 February, 2023; v1 submitted 19 August, 2022;
originally announced August 2022.
-
GWFish: A simulation software to evaluate parameter-estimation capabilities of gravitational-wave detector networks
Authors:
Jan Harms,
Ulyana Dupletsa,
Biswajit Banerjee,
Marica Branchesi,
Boris Goncharov,
Andrea Maselli,
Ana Carolina Silva Oliveira,
Samuele Ronchini,
Jacopo Tissino
Abstract:
An important step in the planning of future gravitational-wave (GW) detectors and of the networks they will form is the estimation of their detection and parameter-estimation capabilities, which is the basis of science-case studies. Several future GW detectors have been proposed or are under development, which might also operate and observe in parallel. These detectors include terrestrial, lunar,…
▽ More
An important step in the planning of future gravitational-wave (GW) detectors and of the networks they will form is the estimation of their detection and parameter-estimation capabilities, which is the basis of science-case studies. Several future GW detectors have been proposed or are under development, which might also operate and observe in parallel. These detectors include terrestrial, lunar, and space-borne detectors. In this paper, we present GWFish, a new software to simulate GW detector networks and to calculate measurement uncertainties based on the Fisher-matrix approximation. GWFish models the impact of detector motion on PE and makes it possible to analyze multiband scenarios, i.e., observation of a GW signal by different detectors in different frequency bands. We showcase a few examples for the Einstein Telescope (ET) including the sky-localization of binary neutron stars, and ET's capability to measure the polarization of GWs.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
Variation in defects and properties in composite of ZnO and α-Fe2O3 for methyl blue dye removal
Authors:
Boris Wareppam,
K. Priyananda Singh,
N. Joseph Singh,
Subrata Ghosh,
Ng. Aomoa,
V. K. Garg,
A. C. Oliveira,
L. Herojit Singh
Abstract:
The plasma deposition wall coated composite of ZnO and α-Fe2O3 (ZF-W) after exposure to ~ 2000 °C, mostly considered as waste-materials and cleaned out from the deposition unit, was subjected to anneal at 300, 500 and 1000 °C to manipulate the structural properties. An evolution of defect states along with the structural changes has been identified as annealing temperature was varied. As a consequ…
▽ More
The plasma deposition wall coated composite of ZnO and α-Fe2O3 (ZF-W) after exposure to ~ 2000 °C, mostly considered as waste-materials and cleaned out from the deposition unit, was subjected to anneal at 300, 500 and 1000 °C to manipulate the structural properties. An evolution of defect states along with the structural changes has been identified as annealing temperature was varied. As a consequence, an unstable state of ZnFe2O4 was found to be stabilized at 500 °C and migration of Zn from ZnO causes the phase transformation from the α-Fe2O3 to ZnFe2O4. While implemented for methyl blue adsorption/degradation without the effect of any external sources, the degradation for ZF-W annealed at 300 °C, 500 °C and 1000 °C were 84%, 68% and 82%, respectively. Compared to annealed structures, pristine ZF-W delivered the highest methyl blue adsorption efficiency of 86%. The changes in adsorption/degradation properties have been correlated with the simultaneous evolution of defects and structural properties of ZF-W as annealed at different temperatures. The plausible mechanism on the interaction of methyl blue with the composites on the adsorption/degradation is proposed. These findings give a clear indication on the importance of defects presence in the mixed metal oxide composite to obtain high-performance degradation/adsorption properties for sustainable wastewater treatment.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
A Tutorial on Trusted and Untrusted non-3GPP Accesses in 5G Systems -- First Steps Towards a Unified Communications Infrastructure
Authors:
Mario Teixeira Lemes,
Antonio Marcos Alberti,
Cristiano Bonato Both,
Antonio C. de Oliveira Jr.,
Kleber Vieira Cardoso
Abstract:
Fifth-generation (5G) systems are designed to enable convergent access-agnostic service availability. This means that 5G services will be available over 5G New Radio air interface and also through other non-Third Generation Partnership Project (3GPP) access networks, e.g., IEEE 802.11 (Wi-Fi). 3GPP has recently published the Release 16 that includes trusted non-3GPP access network concept and wire…
▽ More
Fifth-generation (5G) systems are designed to enable convergent access-agnostic service availability. This means that 5G services will be available over 5G New Radio air interface and also through other non-Third Generation Partnership Project (3GPP) access networks, e.g., IEEE 802.11 (Wi-Fi). 3GPP has recently published the Release 16 that includes trusted non-3GPP access network concept and wireless wireline convergence. The main goal of this tutorial is to present an overview of access to 5G core via non-3GPP access networks specified by 3GPP until Release 16 (i.e., untrusted, trusted, and wireline access). The tutorial describes aspects of the convergence of a 5G system and these non-3GPP access networks, such as the authentication and authorization procedures and the data session establishment from the point of view of protocol stack and exchanged messages between the network functions. In order to illustrate several concepts and part of 3GPP specification, we present a basic but fully operational implementation of untrusted non-3GPP access using WLAN. We perform experiments that demonstrate how a Wi-Fi user is authorized in a 5G core and establishes user plane connectivity to a data network. Moreover, we evaluate the performance of this access in terms of time consumed, number of messages, and protocol overhead to established data sessions.
△ Less
Submitted 11 November, 2022; v1 submitted 18 September, 2021;
originally announced September 2021.
-
Complementary Resource Relation of Concurrence and Roughness for atwo Qubits State
Authors:
Mauricio Reis,
Adélcio C. Oliveira
Abstract:
Quantum resources lie at the core of quantum computation as they are responsible for the computational advantage in many tasks. The complementary relations are a pathway to understanding how the physical quantities are related. Here it was shown that there is a complementary relationship that evolves quantumness of a two qubits state and the degree of entanglement, respectively measured by Roughne…
▽ More
Quantum resources lie at the core of quantum computation as they are responsible for the computational advantage in many tasks. The complementary relations are a pathway to understanding how the physical quantities are related. Here it was shown that there is a complementary relationship that evolves quantumness of a two qubits state and the degree of entanglement, respectively measured by Roughness and Concurrence. It was shown that there is a $\mathbb{R}^2$ surface that characterizes these quantities and can be understood as a projection of the Bloch Sphere. The distribution of states on the surface shows a concentration in the region of lower roughness and Concurrence, i.e., in the subset of states of greater entropy.
△ Less
Submitted 31 May, 2021;
originally announced June 2021.
-
Quantum Noise and its Importance to the Quantum Classical Transition Problem: Energy Measurement Aspects
Authors:
Adélcio C. Oliveira,
Z. T. Oliveira Junior,
N. S. Correia
Abstract:
In the present contribution we discuss the role of experimental limitations in the classical limit problem. We studied some simple models and found that Quantum Mechanics does not re-produce classical mechanical predictions, unless we consider the experimental limitations ruled by uncertainty principle. We have shown that the discrete nature of energy levels of integrable systems can be accessed b…
▽ More
In the present contribution we discuss the role of experimental limitations in the classical limit problem. We studied some simple models and found that Quantum Mechanics does not re-produce classical mechanical predictions, unless we consider the experimental limitations ruled by uncertainty principle. We have shown that the discrete nature of energy levels of integrable systems can be accessed by classical measurements. We have defined a precise limit for this procedure. It may be used as a tool to define the classical limit as far as the discrete spectra of integrable systems are concerned.
△ Less
Submitted 5 November, 2020;
originally announced November 2020.
-
Edge Selection in Bilinear Dynamical Networks
Authors:
Arthur Castello B. de Oliveira,
Milad Siami,
Eduardo D. Sontag
Abstract:
We develop some basic principles for the design and robustness analysis of a continuous-time bilinear dynamical network, where an attacker can manipulate the strength of the interconnections/edges between some of the agents/nodes. We formulate the edge protection optimization problem of picking a limited number of attack-free edges and minimizing the impact of the attack over the bilinear dynamica…
▽ More
We develop some basic principles for the design and robustness analysis of a continuous-time bilinear dynamical network, where an attacker can manipulate the strength of the interconnections/edges between some of the agents/nodes. We formulate the edge protection optimization problem of picking a limited number of attack-free edges and minimizing the impact of the attack over the bilinear dynamical network.In particular, the $\mathcal{H}_2$-norm of bilinear systems is known to capture robustness and performance properties analogous to its linear counterpart and provides valuable insights for identifying which edges are most sensitive to attacks. The exact optimization problem is combinatorial in the number of edges, and brute-force approaches show poor scalability. However, we show that the $\mathcal{H}_2$-norm as a cost function is supermodular and, therefore, allows for efficient greedy approximations of the optimal solution. We illustrate and compare the effectiveness of our theoretical findings via numerical simulations.
△ Less
Submitted 20 March, 2023; v1 submitted 8 September, 2020;
originally announced September 2020.
-
Focal ratio degradation for fiber positioner operation in astronomical spectrographs
Authors:
Brent Belland,
James Gunn,
Dan Reiley,
Judith Cohen,
Evan Kirby,
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Mitsuko Roberts,
Michael Seiffert
Abstract:
Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread function. However, while FRD is a function of many fiber properties such as stresses, microbending, and surface imperfections, angular misalignments between the in…
▽ More
Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread function. However, while FRD is a function of many fiber properties such as stresses, microbending, and surface imperfections, angular misalignments between the incoming light and the face of the fiber also affect the light profile and complicate this measurement. A compact experimental setup and a model separating FRD from angular misalignment was applied to a fiber subjected to varying stresses or angular misalignments to determine the magnitude of these effects. The FRD was then determined for a fiber in a fiber positioner that will be used in the Subaru Prime Focus Spectrograph (PFS). The analysis we carried out for the PFS positioner suggests that effects of angular misalignment dominate and no significant FRD increase due to stress should occur.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Thruster-assisted center manifold shaping in bipedal legged locomotion
Authors:
Arthur C. B. de Oliveira,
Alireza Ramezani
Abstract:
This work tries to contribute to the design of legged robots with capabilities boosted through thruster-assisted locomotion. Our long-term goal is the development of robots capable of negotiating unstructured environments, including land and air, by leveraging legs and thrusters collaboratively. These robots could be used in a broad number of applications including search and rescue operations, sp…
▽ More
This work tries to contribute to the design of legged robots with capabilities boosted through thruster-assisted locomotion. Our long-term goal is the development of robots capable of negotiating unstructured environments, including land and air, by leveraging legs and thrusters collaboratively. These robots could be used in a broad number of applications including search and rescue operations, space exploration, automated package handling in residential spaces and digital agriculture, to name a few. In all of these examples, the unique capability of thruster-assisted mobility greatly broadens the locomotion designs possibilities for these systems. In an effort to demonstrate thrusters effectiveness in the robustification and efficiency of bipedal locomotion gaits, this work explores their effects on the gait limit cycles and proposes new design paradigms based on shaping these center manifolds with strong foliations. Unilateral contact force feasibility conditions are resolved in an optimal control scheme.
△ Less
Submitted 5 June, 2020;
originally announced June 2020.
-
Higgs Physics at the HL-LHC and HE-LHC
Authors:
M. Cepeda,
S. Gori,
P. Ilten,
M. Kado,
F. Riva,
R. Abdul Khalek,
A. Aboubrahim,
J. Alimena,
S. Alioli,
A. Alves,
C. Asawatangtrakuldee,
A. Azatov,
P. Azzi,
S. Bailey,
S. Banerjee,
E. L. Barberio,
D. Barducci,
G. Barone,
M. Bauer,
C. Bautista,
P. Bechtle,
K. Becker,
A. Benaglia,
M. Bengala,
N. Berger
, et al. (352 additional authors not shown)
Abstract:
The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the…
▽ More
The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the discovery, with a conspicuously larger dataset collected during LHC Run 2 at a 13 TeV centre-of-mass energy, the theory and experimental particle physics communities have started a meticulous exploration of the potential for precision measurements of its properties. This includes studies of Higgs boson production and decays processes, the search for rare decays and production modes, high energy observables, and searches for an extended electroweak symmetry breaking sector. This report summarises the potential reach and opportunities in Higgs physics during the High Luminosity phase of the LHC, with an expected dataset of pp collisions at 14 TeV, corresponding to an integrated luminosity of 3 ab$^{-1}$. These studies are performed in light of the most recent analyses from LHC collaborations and the latest theoretical developments. The potential of an LHC upgrade, colliding protons at a centre-of-mass energy of 27 TeV and producing a dataset corresponding to an integrated luminosity of 15 ab$^{-1}$, is also discussed.
△ Less
Submitted 19 March, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Jarzynski equality for superconducting optical cavities: an alternative path to determine Helmholtz free energy
Authors:
Josiane Oliveira Rezende de Paula,
J. G. Peixoto de Faria,
J. G. G. de Oliveira Jr.,
Ricardo de Carvalho Falcão,
Adélcio C. Oliveira
Abstract:
A superconducting cavity model was proposed as a way to experimentally investigate the work performed in a quantum system. We found a simple mathematical relationship between the free energy variation and visibility measurement in quantum cavity context. If we consider the difference of Hamiltonian at time $t_0$ and $t_λ$ (protocol time) as a quantum work, then the Jarzynski equality is valid and…
▽ More
A superconducting cavity model was proposed as a way to experimentally investigate the work performed in a quantum system. We found a simple mathematical relationship between the free energy variation and visibility measurement in quantum cavity context. If we consider the difference of Hamiltonian at time $t_0$ and $t_λ$ (protocol time) as a quantum work, then the Jarzynski equality is valid and the visibility can be used to determine the work done on the cavity.
△ Less
Submitted 4 January, 2019;
originally announced January 2019.
-
Beyond the Standard Model Physics at the HL-LHC and HE-LHC
Authors:
X. Cid Vidal,
M. D'Onofrio,
P. J. Fox,
R. Torre,
K. A. Ulmer,
A. Aboubrahim,
A. Albert,
J. Alimena,
B. C. Allanach,
C. Alpigiani,
M. Altakach,
S. Amoroso,
J. K. Anders,
J. Y. Araz,
A. Arbey,
P. Azzi,
I. Babounikau,
H. Baer,
M. J. Baker,
D. Barducci,
V. Barger,
O. Baron,
L. Barranco Navarro,
M. Battaglia,
A. Bay
, et al. (272 additional authors not shown)
Abstract:
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible futu…
▽ More
This is the third out of five chapters of the final report [1] of the Workshop on Physics at HL-LHC, and perspectives on HE-LHC [2]. It is devoted to the study of the potential, in the search for Beyond the Standard Model (BSM) physics, of the High Luminosity (HL) phase of the LHC, defined as $3~\mathrm{ab}^{-1}$ of data taken at a centre-of-mass energy of $14~\mathrm{TeV}$, and of a possible future upgrade, the High Energy (HE) LHC, defined as $15~\mathrm{ab}^{-1}$ of data at a centre-of-mass energy of $27~\mathrm{TeV}$. We consider a large variety of new physics models, both in a simplified model fashion and in a more model-dependent one. A long list of contributions from the theory and experimental (ATLAS, CMS, LHCb) communities have been collected and merged together to give a complete, wide, and consistent view of future prospects for BSM physics at the considered colliders. On top of the usual standard candles, such as supersymmetric simplified models and resonances, considered for the evaluation of future collider potentials, this report contains results on dark matter and dark sectors, long lived particles, leptoquarks, sterile neutrinos, axion-like particles, heavy scalars, vector-like quarks, and more. Particular attention is placed, especially in the study of the HL-LHC prospects, to the detector upgrades, the assessment of the future systematic uncertainties, and new experimental techniques. The general conclusion is that the HL-LHC, on top of allowing to extend the present LHC mass and coupling reach by $20-50\%$ on most new physics scenarios, will also be able to constrain, and potentially discover, new physics that is presently unconstrained. Moreover, compared to the HL-LHC, the reach in most observables will generally more than double at the HE-LHC, which may represent a good candidate future facility for a final test of TeV-scale new physics.
△ Less
Submitted 13 August, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Roughness as Classicality Indicator of a Quantum State
Authors:
Humberto C. F. Lemos,
Alexandre C. L. Almeida,
Barbara Amaral,
Adélcio C. Oliveira
Abstract:
We define a new quantifier of classicality for a quantum state, the Roughness, which is given by the $\mathcal{L}^2 (\R^2)$ distance between Wigner and Husimi functions. We show that the Roughness is bounded and therefore it is a useful tool for comparison between different quantum states for single bosonic systems. The state classification via the Roughness is not binary, but rather it is continu…
▽ More
We define a new quantifier of classicality for a quantum state, the Roughness, which is given by the $\mathcal{L}^2 (\R^2)$ distance between Wigner and Husimi functions. We show that the Roughness is bounded and therefore it is a useful tool for comparison between different quantum states for single bosonic systems. The state classification via the Roughness is not binary, but rather it is continuous in the interval [0,1], being the state more classic as the Roughness approaches to zero, and more quantum when it is closer to the unity. The Roughness is maximum for Fock states when its number of photons is arbitrarily large, and also for squeezed states at the maximum compression limit. On the other hand, the Roughness reaches its minimum value for thermal states at infinite temperature and, more generally, for infinite entropy states. The Roughness of a coherent state is slightly below one half, so we may say that it is more a classical state than a quantum one. Another important result is that the Roughness performs well for discriminating both pure and mixed states. Since the Roughness measures the inherent quantumness of a state, we propose another function, the Dynamic Distance Measure (DDM), which is suitable for measure how much quantum is a dynamics. Using DDM, we studied the quartic oscillator, and we observed that there is a certain complementarity between dynamics and state, i.e. when dynamics becomes more quantum, the Roughness of the state decreases, while the Roughness grows as the dynamics becomes less quantum.
△ Less
Submitted 8 February, 2018;
originally announced February 2018.
-
Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, recent progress, and future perspectives
Authors:
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Yuki Moritani,
Kiyoto Yabe,
Yuki Ishizuka,
Akitoshi Ueda,
Yukiko Kamata,
Hrand Aghazarian,
Stephane Arnouts,
Gabriel Barban,
Robert H. Barkhouser,
Renato C. Borges,
David F. Braun,
Michael A. Carr,
Pierre-Yves Chabaud,
Yin-Chang Chang,
Hsin-Yo Chen,
Masashi Chiba,
Richard C. Y. Chou,
You-Hua Chu,
Judith G. Cohen,
Rodrigo P. de Almeida,
Antonio C. de Oliveira,
Ligia S. de Oliveira
, et al. (75 additional authors not shown)
Abstract:
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simult…
▽ More
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6-2.7A. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
The Current Status of Prime Focus Instrument of Subaru Prime Focus Spectrograph
Authors:
Shiang-Yu Wang,
Mark A. Schwochert,
Pin-Jie Huang,
Hsin-Yo Chen,
Masahiko Kimura,
Richard C. Y. Chou,
Yin-Chang Chang,
Yen-Sang Hu,
Hung-Hsu Ling,
Chaz N. Morantz,
Dan J. Reiley,
Peter Mao,
David F. Braun,
Chih-Yi Wen,
Chi-Hung Yan,
Jennifer Karr,
James E. Gunn,
Graham Murray,
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Decio Ferreira,
Leandro Henriqu dos Santosh,
Ligia Souza Oliveira,
Antonio Cesar de Oliveira
, et al. (1 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding cameras (AGCs), the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC's Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. In this report, the latest status of PFI development will be given including the performance of PFI components, the setup and performance of the integration and testing equipment.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
Prime Focus Spectrograph for the Subaru telescope: massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy/AGN evolution. A medium resolution mode with a resolving power of 5000 for 0.71 μm to 0.89 μm will also be available by simply exchanging dispersers. We highlight some of the technological aspects of the design. To transform the telescope focal ratio, a broad-band coated microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of the cable system, optimizing overall throughput; a fiber with low focal ratio degradation is selected for the fiber-positioner and fiber-slit components, minimizing the effects of fiber movements and fiber bending. Fiber positioning will be performed by a positioner consisting of two stages of piezo-electric rotary motors. The positions of these motors are measured by taking an image of artificially back-illuminated fibers with the metrology camera located in the Cassegrain container; the fibers are placed in the proper location by iteratively measuring and then adjusting the positions of the motors. Target light reaches one of the four identical fast-Schmidt spectrograph modules, each with three arms. The PFS project has passed several project-wide design reviews and is now in the construction phase.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Studying focal ratio degradation of optical fibers for Subaru Prime Focus Spectrograph
Authors:
Jesulino Bispo dos Santos,
Antonio Cesar de Oliveira,
James Gunn,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Bruno Castilho,
Clemens Darvin Gneiding,
Flavio Felipe Ribeiro,
Graham Murray,
Daniel J. Reiley,
Laerte Sodré Junior,
Claudia Mendes de Oliveira
Abstract:
Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or increased complexity in spectrograph design. Laboratório Nacional de Astrofísica (LNA) has developed a system that can accurately and precisely measures FRD, usi…
▽ More
Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or increased complexity in spectrograph design. Laboratório Nacional de Astrofísica (LNA) has developed a system that can accurately and precisely measures FRD, using an absolute method that can also measure fiber throughput. This paper describes the metrology system and shows measurements of Polymicro fiber FBP129168190, FBP127165190 and Fujikura fiber 128170190. Although the FRD of the two fibers are low and similar to one another, it is very important to know the exact characteristics of these fibers since both will be used in the construction of FOCCoS (Fiber Optical Cable and Connectors System) for PFS (Prime Focus Spectrograph) to be installed at the Subaru telescope.
△ Less
Submitted 13 August, 2014;
originally announced August 2014.
-
Polish device for FOCCoS/PFS slit system
Authors:
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Lucas Souza Marrara,
Leandro Henrique dos Santos,
Décio Ferreira,
Jesulino Bispo dos Santos,
Rodrigo de Paiva Vilaca,
Josimar Aparecido Rosa,
Laerte Sodre Junior,
Claudia Mendes de Oliveira
Abstract:
The Fiber Optical Cable and Connector System, FOCCoS, for the Prime Focus Spectrograph, PFS, is responsible for transporting light from the Subaru Telescope focal plane to a set of four spectrographs. Each spectrograph will be fed by a convex curved slit with 616 optical fibers organized in a linear arrangement. The slit frontal surface is covered with a special dark composite, made with refractor…
▽ More
The Fiber Optical Cable and Connector System, FOCCoS, for the Prime Focus Spectrograph, PFS, is responsible for transporting light from the Subaru Telescope focal plane to a set of four spectrographs. Each spectrograph will be fed by a convex curved slit with 616 optical fibers organized in a linear arrangement. The slit frontal surface is covered with a special dark composite, made with refractory oxide, which is able to sustain its properties with minimum quantities of abrasives during the polishing process; this stability is obtained This stability is obtained by the detachment of the refractory oxide nanoparticles, which then gently reinforce gently the polishing process and increase its the efficiency. The surface roughness measured in several samples after high performance polishing was about 0.01 microns. Furthermore, the time for obtaining a polished surface with this quality is about 10 times less than the time required for polishing a brass, glass or ceramic surface of the same size. In this paper, we describe the procedure developed for high quality polishing of this type of slit. The cylindrical polishing described here, uses cylindrical concave metal bases on which glass paper is based. The polishing process consists to use grid sequences of 30 microns, 12 microns, 9 microns, 5 microns, 3 microns, 1 micron and, finally, a colloidal silica on a chemical cloth. To obtain the maximum throughput, the surface of the fibers should be polished in such a way that they are optically flat and free from scratches. The optical fibers are inspected with a microscope at all stages of the polishing process to ensure high quality. The efficiency of the process may be improved by using a cylindrical concave composite base as a substrate suitable for diamond liquid solutions. Despite this process being completely by hand, the final result shows a very high quality.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Multi-fibers connectors systems for FOCCoS-PFS-Subaru
Authors:
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Lucas Souza Marrara,
Leandro Henrique dos Santos,
Marcio Vital de Arruda,
Jesulino Bispo dos Santos,
Décio Ferreira,
Josimar Aparecido Rosa,
Rodrigo de Paiva Vilaca,
Laerte Sodre Junior Claudia Mendes de Oliveira,
James E. Gunn
Abstract:
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs through optical fibers cables as part of PFS instrument for Subaru telescope. The optical fiber cable will be segmented in 3 parts along the route, cable A, cable B and cable C, connected by a set of multi-fiber connectors. The company USCONEC produces the multi-fi…
▽ More
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs through optical fibers cables as part of PFS instrument for Subaru telescope. The optical fiber cable will be segmented in 3 parts along the route, cable A, cable B and cable C, connected by a set of multi-fiber connectors. The company USCONEC produces the multi-fiber connector under study. The USCONEC 32F model can connect 32 optical fibers in a 4 x 8 matrix arrangement. The ferrules are made of a durable composite, Polyphenylene Sulfide (PPS) based thermoplastic. The connections are held in place by a push-on/pull-off latch, and the connector can also be distinguished by a pair of metal guide pins that protrude from the front of the connector. Two fibers per connector will be used for monitoring the connection procedure. It was found to be easy to polish and it is small enough to be mounted in groups. Highly multiplexed instruments like PFS require a fiber connector system that can deliver excellent optical performance and reliability. PFS requires two different types of structures to organize the connectors. The Tower Connector system, with 80 multi-fiber connectors, will be a group of connectors for connecting cable B (Telescope Structure) with cable C (Positioners Plate). The Gang Connector system is a group of 8 gang connectors, each one with 12 multi-fibers connectors, for connecting cable B (Telescope Structure) with cable A (Spectrograph). The bench tests with these connector systems and the chosen fibers should measure the throughput of light and the stability after many connections and disconnections. In this paper we describe tests and procedures to evaluate the throughput and FRD increment. The lifetime of the ferrules is also in evaluation.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Slit device for FOCCoS, PFS, Subaru
Authors:
Antonio Cesar de Oliveira,
James E. Gunn,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Lucas Souza Marrara,
Leandro Henrique dos Santos,
Décio Ferreira,
Jesulino Bispo dos Santos,
Josimar Aparecido Rosa,
Flavio Felipe Ribeiro,
Rodrigo de Paiva Vilaça,
Orlando Verducci Junior,
Laerte Sodré Junior,
Claudia Mendes de Oliveira
Abstract:
The Fiber Optical Cable and Connector System, FOCCoS, subsystem of the Prime Focus Spectrograph, PFS, for Subaru telescope, is responsible to feed four spectrographs with a set of optical fibers cables. The light injection for each spectrograph is assured by a convex curved slit with a linear array of 616 optical fibers. In this paper we present a design of a slit that ensures the right direction…
▽ More
The Fiber Optical Cable and Connector System, FOCCoS, subsystem of the Prime Focus Spectrograph, PFS, for Subaru telescope, is responsible to feed four spectrographs with a set of optical fibers cables. The light injection for each spectrograph is assured by a convex curved slit with a linear array of 616 optical fibers. In this paper we present a design of a slit that ensures the right direction of the fibers by using masks of micro holes. This kind of mask is made by a technique called electroforming, which is able to produce a nickel plate with holes in a linear sequence. The precision error is around 1micron in the diameter and 1 micron in the positions of the holes. This nickel plate may be produced with a thickness between 50 and 200 microns, so it may be very flexible. This flexibility allows the mask to be bent into the shape necessary for a curved slit. The concept requires two masks, which we call Front Mask, and Rear Mask, separated by a gap that defines the thickness of the slit. The pitch and the diameter of the holes define the linear geometry of the slit; the curvature of each mask defines the angular geometry of the slit. Obviously, this assembly must be mounted inside a structure rigid and strong enough to be supported inside the spectrograph. This structure must have a CTE optimized to avoid displacement of the fibers or increased FRD of the fibers when the device is submitted to temperatures around 3 degrees Celsius, the temperature of operation of the spectrograph. We have produced two models. Both are mounted inside a very compact Invar case, and both have their front surfaces covered by a dark composite, to reduce stray light. Furthermore, we have conducted experiments with two different internal structures to minimize effects caused by temperature gradients.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru
Authors:
Antonio Cesar de Oliveira,
Lígia Souza de Oliveira,
Márcio V. de Arruda,
Lucas Souza Marrara,
Leandro H. dos Santos,
Décio Ferreira,
Jesulino B. dos Santos,
Josimar A. Rosa,
Orlando V. Junior,
Jeferson M. Pereira,
Bruno Castilho,
Clemens Gneiding,
Laerte S. Junior,
Claudia M. de Oliveira,
James E. Gunn,
Akitoshi Ueda,
Naruhisa Takato,
Atsushi Shimono,
Hajime Sugai,
Hiroshi Karoji,
Masahiko Kimura,
Naoyuki Tamura,
Shiang-Yu Wang,
Graham Murray,
David Le Mignant
, et al. (7 additional authors not shown)
Abstract:
FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi…
▽ More
FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Current status of the Spectrograph System for the SuMIRe/PFS
Authors:
S. Vives,
D. Le Mignant,
J. E. Gunn,
S. Smee,
L. Souza de Oliveira,
N. Tamura,
H. Sugai,
R. Barkhouser,
A. Bozier,
M. A. Carr,
A. Cesar de Oliveira,
D. Ferrand,
M. Golebiowski,
M. Hart,
S. Hope,
M. Jaquet,
F. Madec,
S. Pascal,
T. Pegot-Ogier,
M. Vittal de Arruda
Abstract:
The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system i…
▽ More
The Prime Focus Spectrograph (PFS) is a new facility instrument for Subaru Telescope which will be installed in around 2017. It is a multi-object spectrograph fed by about 2400 fibers placed at the prime focus covering a hexagonal field-of-view with 1.35 deg diagonals and capable of simultaneously obtaining data of spectra with wavelengths ranging from 0.38 um to 1.26 um. The spectrograph system is composed of four identical modules each receiving the light from 600 fibers. Each module incorporates three channels covering the wavelength ranges 0.38-0.65 mu ("Blue"), 0.63-0.97 mu ("Red"), and 0.94-1.26 mu ("NIR") respectively; with resolving power which progresses fairly smoothly from about 2000 in the blue to about 4000 in the infrared. An additional spectral mode allows reaching a spectral resolution of 5000 at 0.8mu (red). The proposed optical design is based on a Schmidt collimator facing three Schmidt cameras (one per spectral channel). This architecture is very robust, well known and documented. It allows for high image quality with only few simple elements (high throughput) at the expense of the central obscuration, which leads to larger optics. Each module has to be modular in its design to allow for integration and tests and for its safe transport up to the telescope: this is the main driver for the mechanical design. In particular, each module will be firstly fully integrated and validated at LAM (France) before it is shipped to Hawaii. All sub-assemblies will be indexed on the bench to allow for their accurate repositioning. This paper will give an overview of the spectrograph system which has successfully passed the Critical Design Review (CDR) in 2014 March and which is now in the construction phase.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology,…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Complementarity and Classical Limit of Quantum Mechanics: Energy Measurement aspects
Authors:
Adélcio C. Oliveira,
Zolacir T. Oliveira Junior,
Nestor S. Correia
Abstract:
In the present contribution we discuss the role of experimental limitations in the classical limit problem. We studied some simple models and found that Quantum Mechanics does not re-produce classical mechanical predictions, unless we consider the experimental limitations ruled by uncertainty principle. We have shown that the discrete nature of energy levels of integrable systems can be accessed b…
▽ More
In the present contribution we discuss the role of experimental limitations in the classical limit problem. We studied some simple models and found that Quantum Mechanics does not re-produce classical mechanical predictions, unless we consider the experimental limitations ruled by uncertainty principle. We have shown that the discrete nature of energy levels of integrable systems can be accessed by classical measurements. We have defined a precise limit for this procedure. It may be used as a tool to define the classical limit as far as the discrete spectra of integrable systems are concerned. If a diffusive environment is considered, we conclude that the "lifetime" of discreteness is approximately $1/κ$ ($κ$ is the diffusion constant), thus it was possible to relate the classical limit of a spectra with the action of an environment and experimental resolution.
△ Less
Submitted 1 July, 2013;
originally announced July 2013.
-
Formalizing the Confluence of Orthogonal Rewriting Systems
Authors:
Ana Cristina Rocha Oliveira,
Mauricio Ayala-Rincón
Abstract:
Orthogonality is a discipline of programming that in a syntactic manner guarantees determinism of functional specifications. Essentially, orthogonality avoids, on the one side, the inherent ambiguity of non determinism, prohibiting the existence of different rules that specify the same function and that may apply simultaneously (non-ambiguity), and, on the other side, it eliminates the possi…
▽ More
Orthogonality is a discipline of programming that in a syntactic manner guarantees determinism of functional specifications. Essentially, orthogonality avoids, on the one side, the inherent ambiguity of non determinism, prohibiting the existence of different rules that specify the same function and that may apply simultaneously (non-ambiguity), and, on the other side, it eliminates the possibility of occurrence of repetitions of variables in the left-hand side of these rules (left linearity). In the theory of term rewriting systems (TRSs) determinism is captured by the well-known property of confluence, that basically states that whenever different computations or simplifications from a term are possible, the computed answers should coincide. Although the proofs are technically elaborated, confluence is well-known to be a consequence of orthogonality. Thus, orthogonality is an important mathematical discipline intrinsic to the specification of recursive functions that is naturally applied in functional programming and specification. Starting from a formalization of the theory of TRSs in the proof assistant PVS, this work describes how confluence of orthogonal TRSs has been formalized, based on axiomatizations of properties of rules, positions and substitutions involved in parallel steps of reduction, in this proof assistant. Proofs for some similar but restricted properties such as the property of confluence of non-ambiguous and (left and right) linear TRSs have been fully formalized.
△ Less
Submitted 29 March, 2013;
originally announced March 2013.
-
Multi Higgs and Vector boson production beyond the Standard Model
Authors:
A. Belyaev,
A. C. A. Oliveira,
R. Rosenfeld,
M. C. Thomas
Abstract:
If the electroweak symmetry breaking is originated from a strongly coupled sector, as for instance in composite Higgs models, the Higgs boson couplings can deviate from their Standard Model values. In such cases, at sufficiently high energies there could occur an onset of multiple Higgs boson and longitudinally polarised electroweak gauge boson (V_L) production. We study the sensitivity to anomalo…
▽ More
If the electroweak symmetry breaking is originated from a strongly coupled sector, as for instance in composite Higgs models, the Higgs boson couplings can deviate from their Standard Model values. In such cases, at sufficiently high energies there could occur an onset of multiple Higgs boson and longitudinally polarised electroweak gauge boson (V_L) production. We study the sensitivity to anomalous Higgs couplings in inelastic processes with 3 and 4 particles (either Higgs bosons or V_L's) in the final state. We show that, due to the more severe cancellations in the corresponding amplitudes as compared to the usual 2 to 2 processes, large enhancements with respect to the Standard Model can arise even for small modifications of the Higgs couplings. In particular, we find that triple Higgs production provides the best multiparticle channel to look for these deviations. We briefly explore the consequences of multiparticle production at the LHC.
△ Less
Submitted 16 December, 2012;
originally announced December 2012.
-
FOCCoS for Subaru PFS
Authors:
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Jesulino Bispo dos Santos,
Lucas Souza Marrara,
Vanessa Bawden de Paula Macanhan,
Joao Batista de Carvalho Oliveira,
Rodrigo de Paiva Vilacca,
Tania Pereira Dominici,
Laerte Sodre Junior,
Claudia Mendes de Oliveira,
Hiroshi Karoji,
Hajime Sugai,
Atsushi Shimono,
Naoyuki Tamura,
Naruhisa Takato,
Akitoshi Ueda
Abstract:
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs by an optical fibers cable as part of Subaru PFS instrument. Each positioner retains one fiber entrance attached at a microlens, which is responsible for the F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. The optical…
▽ More
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs by an optical fibers cable as part of Subaru PFS instrument. Each positioner retains one fiber entrance attached at a microlens, which is responsible for the F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. The optical fibers cable will be segmented in 3 parts at long of the way, cable A, cable B and cable C, connected by a set of multi-fibers connectors. Cable B will be permanently attached at the Subaru telescope. The first set of multi-fibers connectors will connect the cable A to the cable C from the spectrograph system at the Nasmith platform. The cable A, is an extension of a pseudo-slit device obtained with the linear disposition of the extremities of the optical fibers and fixed by epoxy at a base of composite substrate. The second set of multi-fibers connectors will connect the other extremity of cable A to the cable B, which is part of the positioner's device structure. The optical fiber under study for this project is the Polymicro FBP120170190, which has shown very encouraging results. The kind of test involves FRD measurements caused by stress induced by rotation and twist of the fiber extremity, similar conditions to those produced by positioners of the PFS instrument. The multi-fibers connector under study is produced by USCONEC Company and may connect 32 optical fibers. The tests involve throughput of light and stability after many connections and disconnections. This paper will review the general design of the FOCCoS subsystem, methods used to fabricate the devices involved and the tests results necessary to evaluate the total efficiency of the set.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
Prime Focus Spectrograph - Subaru's future -
Authors:
Hajime Sugai,
Hiroshi Karoji,
Naruhisa Takato,
Naoyuki Tamura,
Atsushi Shimono,
Youichi Ohyama,
Akitoshi Ueda,
Hung-Hsu Ling,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
David F. Braun,
Robin J. Bruno,
Michael A. Carr,
João Batista de Carvalho Oliveira,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard G. Dekany,
Tania Pereira Dominici,
Richard S. Ellis,
Charles D. Fisher,
James E. Gunn,
Timothy M. Heckman,
Paul T. P. Ho
, et al. (29 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advanta…
▽ More
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advantage of Subaru's wide field of view, which is further extended with the recently completed Wide Field Corrector, PFS will enable us to carry out multi-fiber spectroscopy of 2400 targets within 1.3 degree diameter. A microlens is attached at each fiber entrance for F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. Fibers are accurately placed onto target positions by positioners, each of which consists of two stages of piezo-electric rotary motors, through iterations by using back-illuminated fiber position measurements with a wide-field metrology camera. Fibers then carry light to a set of four identical fast-Schmidt spectrographs with three color arms each: the wavelength ranges from 0.38 μm to 1.3 μm will be simultaneously observed with an average resolving power of 3000. Before and during the era of extremely large telescopes, PFS will provide the unique capability of obtaining spectra of 2400 cosmological/astrophysical targets simultaneously with an 8-10 meter class telescope. The PFS collaboration, led by IPMU, consists of USP/LNA in Brazil, Caltech/JPL, Princeton, & JHU in USA, LAM in France, ASIAA in Taiwan, and NAOJ/Subaru.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
Hidden sector effects on double higgs production near threshold at the LHC
Authors:
A. C. A. Oliveira,
R. Rosenfeld
Abstract:
In this letter we study a novel effect of a hidden sector coupling to the standard model Higgs boson: an enhancement of the Higgs pair production cross section near threshold due to bound state effects. After summing the ladder contributions of the hidden sector to the effective $ggHH$ coupling, we find the amplitude for gluon-gluon scattering via a Higgs loop. We relate this amplitude to the doub…
▽ More
In this letter we study a novel effect of a hidden sector coupling to the standard model Higgs boson: an enhancement of the Higgs pair production cross section near threshold due to bound state effects. After summing the ladder contributions of the hidden sector to the effective $ggHH$ coupling, we find the amplitude for gluon-gluon scattering via a Higgs loop. We relate this amplitude to the double Higgs production cross section via the optical theorem. We find that enhancements of the order of 100 for the partonic cross section near the threshold region can be obtained for a hidden sector strongly coupled to the Higgs boson. The corresponding cross section at the LHC can be as large as a factor of 10 times the SM result for extreme values of the coupling. The detection of such an effect could in principle lead to important information about the hidden sector.
△ Less
Submitted 9 August, 2011; v1 submitted 22 September, 2010;
originally announced September 2010.
-
Decoherence in Search Algorithms
Authors:
G. Abal,
R. Donangelo,
F. L. Marquezino,
A. C. Oliveira,
R. Portugal
Abstract:
Recently several quantum search algorithms based on quantum walks were proposed. Those algorithms differ from Grover's algorithm in many aspects. The goal is to find a marked vertex in a graph faster than classical algorithms. Since the implementation of those new algorithms in quantum computers or in other quantum devices is error-prone, it is important to analyze their robustness under decoher…
▽ More
Recently several quantum search algorithms based on quantum walks were proposed. Those algorithms differ from Grover's algorithm in many aspects. The goal is to find a marked vertex in a graph faster than classical algorithms. Since the implementation of those new algorithms in quantum computers or in other quantum devices is error-prone, it is important to analyze their robustness under decoherence. In this work we analyze the impact of decoherence on quantum search algorithms implemented on two-dimensional grids and on hypercubes.
△ Less
Submitted 8 December, 2009;
originally announced December 2009.
-
Effectively irreversible fringe contrast attenuation induced by one degree of freedom
Authors:
A. R. Bosco de Magalhães,
Adélcio C. Oliveira
Abstract:
The attenuation of fringe contrast in a Ramsey interferometer induced by the atom-field interaction is analyzed. We show that short-time power series expansion is not the proper tool to find the relevant time scale for such process. Analytical expressions to quantify the relevant time scale for the fringe contrast decay and to characterize the long-term effectiveness of this process are proposed.…
▽ More
The attenuation of fringe contrast in a Ramsey interferometer induced by the atom-field interaction is analyzed. We show that short-time power series expansion is not the proper tool to find the relevant time scale for such process. Analytical expressions to quantify the relevant time scale for the fringe contrast decay and to characterize the long-term effectiveness of this process are proposed. For Pegg-Barnett phase state initial conditions, these expressions suggest that: the increase of the energy of the field leads to slower vanishing of fringe contrast; the increase of the field photon number variance leads to more effective attenuation in the final regime. Numerical simulations with coherent and thermal initial states are in qualitative agreement with such results.
△ Less
Submitted 9 August, 2012; v1 submitted 30 October, 2008;
originally announced October 2008.
-
Decoherence and Irreversibility: the role of the reservoir effective Hilbert space size
Authors:
Adelcio C. Oliveira,
A. R. Bosco de Magalhaes
Abstract:
We show that decoherence is determined by the effective Hilbert space size, and demonstrate that a few degrees of freedom system can simulate a "N" degrees of freedom environment if they have the same effective Hilbert space. The effective Hilbert space size of the environment also determines its long time efficiency as generator of irreversible coherence loss.
We show that decoherence is determined by the effective Hilbert space size, and demonstrate that a few degrees of freedom system can simulate a "N" degrees of freedom environment if they have the same effective Hilbert space. The effective Hilbert space size of the environment also determines its long time efficiency as generator of irreversible coherence loss.
△ Less
Submitted 8 September, 2008;
originally announced September 2008.
-
Short Time Dynamics of Scalar Products in Hilbert Space
Authors:
Adélcio C. Oliveira
Abstract:
We use the semiclassical method proposed in \cite{Adelcio2003} to study scalar products such as the overlap, Husimi functions and fidelity decay. Scars of classical periodic orbits arise naturally in this pertubative expansion. We also derive analytically a well known numerical result that fidelity has a quadratic decay for short times. We study the overlap in the chaotic regime and integrable f…
▽ More
We use the semiclassical method proposed in \cite{Adelcio2003} to study scalar products such as the overlap, Husimi functions and fidelity decay. Scars of classical periodic orbits arise naturally in this pertubative expansion. We also derive analytically a well known numerical result that fidelity has a quadratic decay for short times. We study the overlap in the chaotic regime and integrable for some simple systems.
△ Less
Submitted 11 March, 2008;
originally announced March 2008.
-
Simulation of the Single- and Double-Slit Experiments with Quantum Walkers
Authors:
Amanda C. Oliveira,
Renato Portugal,
Raul Donangelo
Abstract:
We employ the broken-link model to create a barrier with slits in a two-dimensional lattice. The diffraction and interference patterns of the probability distribution of quantum walkers passing through the slits are analyzed. Simulations were performed using the main types of coins, and display diffraction and interference patterns that depend on the choice of coins.
We employ the broken-link model to create a barrier with slits in a two-dimensional lattice. The diffraction and interference patterns of the probability distribution of quantum walkers passing through the slits are analyzed. Simulations were performed using the main types of coins, and display diffraction and interference patterns that depend on the choice of coins.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
-
Quantum Entanglement and fixed point Hopf bifurcation
Authors:
M. C. Nemes,
K. Furuya,
G. Q. Pellegrino,
A. C. Oliveira,
Mauricio Reis,
L. Sanz
Abstract:
We present the qualitative differences in the phase transitions of the mono-mode Dicke model in its integrable and chaotic versions. We show that a first order phase transition occurs in the integrable case whereas a second order in the chaotic one. This difference is also reflected in the classical limit: for the integrable case the stable fixed point in phase space suffers a bifurcation of Hop…
▽ More
We present the qualitative differences in the phase transitions of the mono-mode Dicke model in its integrable and chaotic versions. We show that a first order phase transition occurs in the integrable case whereas a second order in the chaotic one. This difference is also reflected in the classical limit: for the integrable case the stable fixed point in phase space suffers a bifurcation of Hopf type whereas for the second one a pitchfork type bifurcation has been reported.
△ Less
Submitted 4 July, 2005;
originally announced July 2005.