-
On how to determine surface roughness power spectra
Authors:
N. Rodriguez,
L. Gontard,
C. Ma,
R. Xu,
B. N. J. Persson
Abstract:
Analytical contact mechanics theories depend on surface roughness through the surface roughness power spectrum. In the present study, we evaluated the usability of various experimental methods for studying surface roughness. Our findings indicated that height data obtained from optical methods often lack accuracy and should not be utilized for calculating surface roughness power spectra. Conversel…
▽ More
Analytical contact mechanics theories depend on surface roughness through the surface roughness power spectrum. In the present study, we evaluated the usability of various experimental methods for studying surface roughness. Our findings indicated that height data obtained from optical methods often lack accuracy and should not be utilized for calculating surface roughness power spectra. Conversely, engineering stylus instruments and atomic force microscopy (AFM) typically yield reliable results that are consistent across the overlapping roughness length scale region. For surfaces with isotropic roughness, the two-dimensional (2D) power spectrum can be derived from the one-dimensional (1D) power spectrum using several approaches, which we explored in this paper.
△ Less
Submitted 10 August, 2024;
originally announced August 2024.
-
Paramagnetic fluctuations of the magnetocaloric compound MnFe$_4$Si$_3$
Authors:
N. Biniskos,
K. Schmalzl,
J. Persson,
S. Raymond
Abstract:
Inelastic neutron scattering technique is employed to investigate the paramagnetic spin dynamics in a single crystalline sample of the magnetocaloric compound MnFe$_4$Si$_3$. In the investigated temperature range, 1.033$\times T_{C}$ to 1.5$\times T_{C}$, where $T_C$ is the Curie temperature, the spin fluctuations are well described by the ferromagnetic Heisenberg model predictions. Apart from the…
▽ More
Inelastic neutron scattering technique is employed to investigate the paramagnetic spin dynamics in a single crystalline sample of the magnetocaloric compound MnFe$_4$Si$_3$. In the investigated temperature range, 1.033$\times T_{C}$ to 1.5$\times T_{C}$, where $T_C$ is the Curie temperature, the spin fluctuations are well described by the ferromagnetic Heisenberg model predictions. Apart from the Heisenberg exchange, additional pseudo-dipolar interactions manifest through a finite long-wavelength relaxation rate that vanishes at the transition temperature ($T_C = 305$\,K). Based on the characteristic extend of spin fluctuations in wave-vector and energy space we determine that the nature of magnetism in MnFe$_4$Si$_3$ is localized above room temperature. This contrasts with the most celebrated Mn and Fe based magnetocaloric materials that are considered as itinerant magnets.
△ Less
Submitted 7 August, 2024;
originally announced August 2024.
-
EventChat: Implementation and user-centric evaluation of a large language model-driven conversational recommender system for exploring leisure events in an SME context
Authors:
Hannes Kunstmann,
Joseph Ollier,
Joel Persson,
Florian von Wangenheim
Abstract:
Large language models (LLMs) present an enormous evolution in the strategic potential of conversational recommender systems (CRS). Yet to date, research has predominantly focused upon technical frameworks to implement LLM-driven CRS, rather than end-user evaluations or strategic implications for firms, particularly from the perspective of a small to medium enterprises (SME) that makeup the bedrock…
▽ More
Large language models (LLMs) present an enormous evolution in the strategic potential of conversational recommender systems (CRS). Yet to date, research has predominantly focused upon technical frameworks to implement LLM-driven CRS, rather than end-user evaluations or strategic implications for firms, particularly from the perspective of a small to medium enterprises (SME) that makeup the bedrock of the global economy. In the current paper, we detail the design of an LLM-driven CRS in an SME setting, and its subsequent performance in the field using both objective system metrics and subjective user evaluations. While doing so, we additionally outline a short-form revised ResQue model for evaluating LLM-driven CRS, enabling replicability in a rapidly evolving field. Our results reveal good system performance from a user experience perspective (85.5% recommendation accuracy) but underscore latency, cost, and quality issues challenging business viability. Notably, with a median cost of $0.04 per interaction and a latency of 5.7s, cost-effectiveness and response time emerge as crucial areas for achieving a more user-friendly and economically viable LLM-driven CRS for SME settings. One major driver of these costs is the use of an advanced LLM as a ranker within the retrieval-augmented generation (RAG) technique. Our results additionally indicate that relying solely on approaches such as Prompt-based learning with ChatGPT as the underlying LLM makes it challenging to achieve satisfying quality in a production environment. Strategic considerations for SMEs deploying an LLM-driven CRS are outlined, particularly considering trade-offs in the current technical landscape.
△ Less
Submitted 9 July, 2024; v1 submitted 5 July, 2024;
originally announced July 2024.
-
Brownian friction dynamics: fluctuations in sliding distance
Authors:
Ruibin Xu,
Feng Zhou,
B. N. J. Persson
Abstract:
We have studied the fluctuation (noise) in the position of sliding blocks under constant driving forces on different substrate surfaces. The experimental data are complemented by simulations using a simple spring-block model where the asperity contact regions are modeled by miniblocks connected to the big block by viscoelastic springs. The miniblocks experience forces that fluctuate randomly with…
▽ More
We have studied the fluctuation (noise) in the position of sliding blocks under constant driving forces on different substrate surfaces. The experimental data are complemented by simulations using a simple spring-block model where the asperity contact regions are modeled by miniblocks connected to the big block by viscoelastic springs. The miniblocks experience forces that fluctuate randomly with the lateral position, simulating the interaction between asperities on the block and the substrate. The theoretical model provides displacement power spectra that agree well with the experimental results.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Weyl points and anomalous transport effects tuned by the Fe doping in Mn$_3$Ge Weyl semimetal
Authors:
Venus Rai,
Subhadip Jana,
Jörg Perßon,
Shibabrata Nandi
Abstract:
The discovery of a significantly large anomalous Hall effect in the chiral antiferromagnetic system - Mn$_3$Ge - indicates that the Weyl points are widely separated in phase space and positioned near the Fermi surface. In order to examine the effects of Fe substitution in Mn$_3$Ge on the presence and location of the Weyl points, we synthesized (Mn$_{1-α}$Fe$_α)$$_3$Ge ($α=0-0.30$) compounds. The a…
▽ More
The discovery of a significantly large anomalous Hall effect in the chiral antiferromagnetic system - Mn$_3$Ge - indicates that the Weyl points are widely separated in phase space and positioned near the Fermi surface. In order to examine the effects of Fe substitution in Mn$_3$Ge on the presence and location of the Weyl points, we synthesized (Mn$_{1-α}$Fe$_α)$$_3$Ge ($α=0-0.30$) compounds. The anomalous Hall effect was observed in compounds up to $α=0.22$, but only within the temperature range where the magnetic structure remains the same as the Mn$_3$Ge. Additionally, positive longitudinal magnetoconductance and planar Hall effect were detected within the same temperature and doping range. These findings strongly suggest the existence of Weyl points in (Mn$_{1-α}$Fe$_α)$$_3$Ge ($α=0-0.22$) compounds. Further, we observed that with an increase in Fe doping fraction, there is a significant reduction in the magnitude of anomalous Hall conductivity, planar Hall effect, and positive longitudinal magnetoconductance, indicating that the Weyl points move further away from the Fermi surface. Consequently, it can be concluded that suitable dopants in the parent Weyl semimetals have the potential to tune the properties of Weyl points and the resulting anomalous electrical transport effects.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Some comments on the fracture of viscoelastic solids
Authors:
B. N. J. Persson,
G. Carbone,
C. Creton,
G. Heinrich,
T. Tada
Abstract:
Crack propagation in viscoelastic solids like rubber is of great practical importance. Shrimali and Lopez-Pamies have proposed a new interesting approach for the crack propagation in viscoelastic solids. We give comments on the validity of the theory and point out some effects not included in the theory.
Crack propagation in viscoelastic solids like rubber is of great practical importance. Shrimali and Lopez-Pamies have proposed a new interesting approach for the crack propagation in viscoelastic solids. We give comments on the validity of the theory and point out some effects not included in the theory.
△ Less
Submitted 7 January, 2024;
originally announced January 2024.
-
Muonic hyperfine structure and the Bohr-Weisskopf effect
Authors:
J. R. Persson
Abstract:
An update is given on the experimental values of the magnetic hyperfine structure and the Bohr-Weisskopf effect in muonic atoms. The need for more measurements and systematic calculations is discussed to allow the differentiation of different models of the Bohr-Weisskopf effect in nuclei.
An update is given on the experimental values of the magnetic hyperfine structure and the Bohr-Weisskopf effect in muonic atoms. The need for more measurements and systematic calculations is discussed to allow the differentiation of different models of the Bohr-Weisskopf effect in nuclei.
△ Less
Submitted 19 April, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Detecting Edit Failures In Large Language Models: An Improved Specificity Benchmark
Authors:
Jason Hoelscher-Obermaier,
Julia Persson,
Esben Kran,
Ioannis Konstas,
Fazl Barez
Abstract:
Recent model editing techniques promise to mitigate the problem of memorizing false or outdated associations during LLM training. However, we show that these techniques can introduce large unwanted side effects which are not detected by existing specificity benchmarks. We extend the existing CounterFact benchmark to include a dynamic component and dub our benchmark CounterFact+. Additionally, we e…
▽ More
Recent model editing techniques promise to mitigate the problem of memorizing false or outdated associations during LLM training. However, we show that these techniques can introduce large unwanted side effects which are not detected by existing specificity benchmarks. We extend the existing CounterFact benchmark to include a dynamic component and dub our benchmark CounterFact+. Additionally, we extend the metrics used for measuring specificity by a principled KL divergence-based metric. We use this improved benchmark to evaluate recent model editing techniques and find that they suffer from low specificity. Our findings highlight the need for improved specificity benchmarks that identify and prevent unwanted side effects.
△ Less
Submitted 3 June, 2023; v1 submitted 27 May, 2023;
originally announced May 2023.
-
An overview of the spin dynamics of antiferromagnetic Mn$_5$Si$_3$
Authors:
N. Biniskos,
F. J. dos Santos,
M. dos Santos Dias,
S. Raymond,
K. Schmalzl,
P. Steffens,
J. Persson,
N. Marzari,
S. Blügel,
S. Lounis,
T. Brückel
Abstract:
The metallic compound Mn$_5$Si$_3$ hosts a series of antiferromagnetic phases which can be controlled by external stimuli such as temperature and magnetic field. In this work, we investigate the spin-excitation spectrum of bulk Mn$_5$Si$_3$ by combining inelastic neutron scattering measurements and density functional theory calculations. We study the evolution of the dynamical response under exter…
▽ More
The metallic compound Mn$_5$Si$_3$ hosts a series of antiferromagnetic phases which can be controlled by external stimuli such as temperature and magnetic field. In this work, we investigate the spin-excitation spectrum of bulk Mn$_5$Si$_3$ by combining inelastic neutron scattering measurements and density functional theory calculations. We study the evolution of the dynamical response under external parameters and demonstrate that the spin dynamics of each phase is robust against any combination of temperature and magnetic field. In particular, the high-energy spin dynamics is very characteristic of the different phases consisting of either spin waves or broad fluctuations patterns.
△ Less
Submitted 12 July, 2023; v1 submitted 3 May, 2023;
originally announced May 2023.
-
Anomalous Hall effect and magnetic structure of the topological semimetal (Mn$_{0.78}$Fe$_{0.22}$)$_{3}$Ge
Authors:
Venus Rai,
Anne Stunault,
Wolfgang Schmidt,
Subhadip Jana,
Jörg Perßon,
Thomas Brückel,
Shibabrata Nandi
Abstract:
Me$_{3+δ}$Ge, being a Weyl semimetal, shows a large anomalous Hall effect (AHE), which decreases slowly with an increase in $δ$ from 0.1 to 0.4. However, AHE in this compound remains significantly large in the whole range of $δ$ because of the robust nature of the topology of bands. To explore the possibility of tuning the anomalous transport effects in Weyl semimetals, we have studied the single-…
▽ More
Me$_{3+δ}$Ge, being a Weyl semimetal, shows a large anomalous Hall effect (AHE), which decreases slowly with an increase in $δ$ from 0.1 to 0.4. However, AHE in this compound remains significantly large in the whole range of $δ$ because of the robust nature of the topology of bands. To explore the possibility of tuning the anomalous transport effects in Weyl semimetals, we have studied the single-crystal hexagonal-(Mn$_{0.78}$Fe$_{0.22}$)$_3$Ge compound. Magnetization of this compound shows two magnetic transitions at 242 K ($T_{\text{N1}}$) and 120 K ($T_{\text{N2}}$). We observed that the AHE persists between $T_{\text{N2}}$ - $T_{\text{N1}}$ and vanishes below $T_{\text{N2}}$. Further, we performed single-crystal neutron diffraction experiments (using spherical neutron polarimetry and unpolarized neutron diffraction) to determine the magnetic structures of (Mn$_{0.78}$Fe$_{0.22}$)$_3$Ge at different temperatures. Our neutron diffraction results show that the sample possesses a collinear antiferromagnetic structure below $T_{\text{N2}}$. However, the magnetic structure of the sample remains noncollinear antiferromagnetic, the same as Mn$_3$Ge, between $T_{\text{N1}}$ to $T_{\text{N2}}$. The presence of AHE, and noncollinear magnetic structure in (Mn$_{0.78}$Fe$_{0.22}$)$_3$Ge, between $T_{\text{N1}}$ and $T_{\text{N2}}$, suggest the existence of Weyl points in this temperature regime. Below $T_{\text{N2}}$, AHE is absent, and the magnetic structure also changes to a collinear antiferromagnetic structure. These observations signify a strong link between the magnetic structure of the sample and AHE.
△ Less
Submitted 29 April, 2023;
originally announced May 2023.
-
Table of hyperfine anomaly in atomic systems -- 2023
Authors:
J. R. Persson
Abstract:
This table is an updated compilation of experimental values of the magnetic hyperfine anomaly in atomic and ionic systems. The literature search covers the period up to December 2022. A short discussion on general trends of the hyperfine anomaly and the theoretical developments are performed.
This table is an updated compilation of experimental values of the magnetic hyperfine anomaly in atomic and ionic systems. The literature search covers the period up to December 2022. A short discussion on general trends of the hyperfine anomaly and the theoretical developments are performed.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Surface roughness induced stress concentration
Authors:
B. N. J. Persson
Abstract:
When a body is exposed to external forces large local stresses may occur at the surface because of surface roughness. Surface stress concentration is important for many applications and in particular for fatigue due to pulsating external forces. For randomly rough surfaces I calculate the probability distribution of surface stress in response to a uniform external tensile stress with the displacem…
▽ More
When a body is exposed to external forces large local stresses may occur at the surface because of surface roughness. Surface stress concentration is important for many applications and in particular for fatigue due to pulsating external forces. For randomly rough surfaces I calculate the probability distribution of surface stress in response to a uniform external tensile stress with the displacement vector field parallel to the rough surface. I present numerical simulation results for the stress distribution $σ(x,y)$ and show that in a typical case, the maximum local tensile stress may be $\sim 10$ times bigger than the applied stress. I discuss the role of the stress concentration on plastic deformation and surface crack generation and propagation.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Topological magnons driven by the Dzyaloshinskii-Moriya interaction in the centrosymmetric ferromagnet Mn$_5$Ge$_3$
Authors:
M. dos Santos Dias,
N. Biniskos,
F. J. dos Santos,
K. Schmalzl,
J. Persson,
F. Bourdarot,
N. Marzari,
S. Blügel,
T. Brückel,
S. Lounis
Abstract:
The phase of the quantum-mechanical wave function can encode a topological structure with wide-ranging physical consequences, such as anomalous transport effects and the existence of edge states robust against perturbations. While this has been exhaustively demonstrated for electrons, properties associated with the elementary quasiparticles in magnetic materials are still underexplored. Here, we s…
▽ More
The phase of the quantum-mechanical wave function can encode a topological structure with wide-ranging physical consequences, such as anomalous transport effects and the existence of edge states robust against perturbations. While this has been exhaustively demonstrated for electrons, properties associated with the elementary quasiparticles in magnetic materials are still underexplored. Here, we show theoretically and via inelastic neutron scattering experiments that the bulk ferromagnet Mn$_5$Ge$_3$ hosts gapped topological Dirac magnons. Although inversion symmetry prohibits a net Dzyaloshinskii-Moriya interaction in the unit cell, it is locally allowed and is responsible for the gap opening in the magnon spectrum. This gap is predicted and experimentally verified to close by rotating the magnetization away from the $c$-axis with an applied magnetic field. Hence, Mn$_5$Ge$_3$ realizes a gapped Dirac magnon material in three dimensions. Its tunability by chemical doping or by thin film nanostructuring defines an exciting new platform to explore and design topological magnons. More generally, our experimental route to verify and control the topological character of the magnons is applicable to bulk centrosymmetric hexagonal materials, which calls for systematic investigation.
△ Less
Submitted 20 October, 2023; v1 submitted 30 November, 2022;
originally announced November 2022.
-
Unconventional magneto-resistance, and electronic transition in Mn$_3$Ge Weyl semimetal
Authors:
Venus Rai,
Subhadip Jana,
Martin Meven,
Rajesh Dutta,
Jörg Perßon,
Shibabrata Nandi
Abstract:
Weyl semimetals are well known for their anomalous transport effects caused by a large fictitious magnetic field generated by the non-zero Berry curvature. We performed the analysis of the electrical transport measurements of the magnetic Weyl semimetal Mn$_{3}$Ge in the a-b and a-c plane. We have observed negative longitudinal magneto-resistance (LMR) at a low magnetic field ($B<1.5$ T) along all…
▽ More
Weyl semimetals are well known for their anomalous transport effects caused by a large fictitious magnetic field generated by the non-zero Berry curvature. We performed the analysis of the electrical transport measurements of the magnetic Weyl semimetal Mn$_{3}$Ge in the a-b and a-c plane. We have observed negative longitudinal magneto-resistance (LMR) at a low magnetic field ($B<1.5$ T) along all the axes. The high field LMR shows different behavior along x and z axes. A similar trend has been observed in the case of planar Hall effect (PHE) measurements as well. The nature of high field LMR along the x axis changes near 200 K. Dominant carrier concentration type, and metallic to semimetallic transition also occur near 200 K. These observations suggest two main conclusions: (i) The high field LMR in Mn$_3$Ge is driven by the metallic - semimetallic nature of the compound. (ii) Mn$_3$Ge compound goes through an electronic band topological transition near 200 K. Single crystal neutron diffraction does not show any change in the magnetic structure below 300 K. However, the in-plane lattice parameter (a) shows a maximum near 230 K. Therefore, it is possible that the change in electronic band structure near 200 K is driven by the a lattice parameter of the compound.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Heat transfer in granular media with weakly interacting particles
Authors:
B. N. J. Persson,
J. Biele
Abstract:
We study the heat transfer in weakly interacting particle systems in vacuum. The particles have surface roughness with self-affine fractal properties, as expected for mineral particles produced by fracture, e.g., by crunching brittle materials in a mortar. We show that the propagating electromagnetic (EM) waves and the evanescent EM-waves, which occur outside of all solids, give the dominant heat…
▽ More
We study the heat transfer in weakly interacting particle systems in vacuum. The particles have surface roughness with self-affine fractal properties, as expected for mineral particles produced by fracture, e.g., by crunching brittle materials in a mortar. We show that the propagating electromagnetic (EM) waves and the evanescent EM-waves, which occur outside of all solids, give the dominant heat transfer for large and small particles, respectively, while the phononic contribution from the area of real contact is negligible. As an application we discuss the heat transfer in rubble pile asteroids.
△ Less
Submitted 10 July, 2022;
originally announced July 2022.
-
Learning Optimal Dynamic Treatment Regimes Using Causal Tree Methods in Medicine
Authors:
Theresa Blümlein,
Joel Persson,
Stefan Feuerriegel
Abstract:
Dynamic treatment regimes (DTRs) are used in medicine to tailor sequential treatment decisions to patients by considering patient heterogeneity. Common methods for learning optimal DTRs, however, have shortcomings: they are typically based on outcome prediction and not treatment effect estimation, or they use linear models that are restrictive for patient data from modern electronic health records…
▽ More
Dynamic treatment regimes (DTRs) are used in medicine to tailor sequential treatment decisions to patients by considering patient heterogeneity. Common methods for learning optimal DTRs, however, have shortcomings: they are typically based on outcome prediction and not treatment effect estimation, or they use linear models that are restrictive for patient data from modern electronic health records. To address these shortcomings, we develop two novel methods for learning optimal DTRs that effectively handle complex patient data. We call our methods DTR-CT and DTR-CF. Our methods are based on a data-driven estimation of heterogeneous treatment effects using causal tree methods, specifically causal trees and causal forests, that learn non-linear relationships, control for time-varying confounding, are doubly robust, and explainable. To the best of our knowledge, our paper is the first that adapts causal tree methods for learning optimal DTRs. We evaluate our proposed methods using synthetic data and then apply them to real-world data from intensive care units. Our methods outperform state-of-the-art baselines in terms of cumulative regret and percentage of optimal decisions by a considerable margin. Our work improves treatment recommendations from electronic health record and is thus of direct relevance for personalized medicine.
△ Less
Submitted 19 June, 2023; v1 submitted 14 April, 2022;
originally announced April 2022.
-
Complex magnetic structure and spin waves of the noncollinear antiferromagnet Mn5Si3
Authors:
N. Biniskos,
F. J. dos Santos,
K. Schmalzl,
S. Raymond,
M. dos Santos Dias,
J. Persson,
N. Marzari,
S. Blügel,
S. Lounis,
T. Brückel
Abstract:
The investigations of the interconnection between micro- and macroscopic properties of materials hosting noncollinear antiferromagnetic ground states are challenging. These forefront studies are crucial for unraveling the underlying mechanisms at play, which may prove beneficial in designing cutting edge multifunctional materials for future applications. In this context, Mn5Si3 has regained scient…
▽ More
The investigations of the interconnection between micro- and macroscopic properties of materials hosting noncollinear antiferromagnetic ground states are challenging. These forefront studies are crucial for unraveling the underlying mechanisms at play, which may prove beneficial in designing cutting edge multifunctional materials for future applications. In this context, Mn5Si3 has regained scientific interest since it displays an unusual and complex ground state, which is considered to be the origin of the anomalous transport and thermodynamic properties that it exhibits. Here, we report the magnetic exchange couplings of the noncollinear antiferromagnetic phase of Mn5Si3 using inelastic neutron scattering measurements and density functional theory calculations. We determine the ground-state spin configuration and compute its magnon dispersion relations which are in good agreement with the ones obtained experimentally. Furthermore, we investigate the evolution of the spin texture under the application of an external magnetic field to demonstrate theoretically the multiple field-induced phase transitions that Mn5Si3 undergoes. Finally, we model the stability of some of the material's magnetic moments under a magnetic field and we find that very susceptible magnetic moments in a frustrated arrangement can be tuned by the field.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
On the stability of spinning asteroids
Authors:
B. N. J. Persson,
J. Biele
Abstract:
Most asteroids with a diameter larger than $\sim 300 \ {\rm m}$ are rubble piles i.e. consisting of more than one solid object. All asteroids are rotating but almost all asteroids larger than $\sim 300 \ {\rm m}$ rotate with a period longer than $2.3 \ {\rm hours}$, which is the critical period where the centrifugal force equals the gravitational force. This indicates that there are nearly no adhe…
▽ More
Most asteroids with a diameter larger than $\sim 300 \ {\rm m}$ are rubble piles i.e. consisting of more than one solid object. All asteroids are rotating but almost all asteroids larger than $\sim 300 \ {\rm m}$ rotate with a period longer than $2.3 \ {\rm hours}$, which is the critical period where the centrifugal force equals the gravitational force. This indicates that there are nearly no adhesive interaction forces between the asteroid fragments. We show that this is due to the surface roughness of the asteroid particles which reduces the van der Waals interaction between the particles by a factor of $100$ for micrometer sized particles and even more for larger particles. We show that surface roughness results in an interaction force which is independent of the size of the particles, in contrast to the linear size dependency expected for particles with smooth surfaces. Thus, two stone fragments of size $100 \ {\rm nm}$ attract each other with the same non-gravitational force as two fragments of size $10 \ {\rm m}$.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Air, helium and water leakage in rubber O-ring seals with application to syringes
Authors:
C. Huon,
A. Tiwari,
C. Rotella,
P. Mangiagalli,
B. N. J. Persson
Abstract:
We study the leakage of fluids (liquids or gases) in syringes with glass barrel, steel plunger and rubber O-ring stopper. The leakrate depends on the interfacial surface roughness and on the viscoelastic properties of the rubber. Random surface roughness is produced by sandblasting the rubber O-rings. We present a very simple theory for gas flow which takes into account both the diffusive and ball…
▽ More
We study the leakage of fluids (liquids or gases) in syringes with glass barrel, steel plunger and rubber O-ring stopper. The leakrate depends on the interfacial surface roughness and on the viscoelastic properties of the rubber. Random surface roughness is produced by sandblasting the rubber O-rings. We present a very simple theory for gas flow which takes into account both the diffusive and ballistic flow. The theory shows that the interfacial fluid flow (leakage) channels are so narrow that the gas flow is mainly ballistic (the so called Knudsen limit). We compare the leakrate obtained using air and helium. For barrels filled with water we observe no leakage even if leakage occurs for gases. We interpret this as resulting from capillary (Laplace pressure or surface energy) effects.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Air leakage in seals with application to syringes
Authors:
N. Rodriguez,
A. Tiwari,
B. N. J. Persson
Abstract:
We study the leakage of air in syringes with Teflon coated rubber stopper and glass barrel. The leakrate depends on the interfacial surface roughness, the viscoelastic properties of the rubber and on the elastoplastic properties of the Teflon coating. The measured leakage rates are compared to the predictions of a simple theory for gas flow, which takes into account both the diffusive and ballisti…
▽ More
We study the leakage of air in syringes with Teflon coated rubber stopper and glass barrel. The leakrate depends on the interfacial surface roughness, the viscoelastic properties of the rubber and on the elastoplastic properties of the Teflon coating. The measured leakage rates are compared to the predictions of a simple theory for gas flow, which takes into account both the diffusive and ballistic air flow, and the elastoplastic multiscale contact mechanics which determines the probability distribution of interfacial separations. The theory shows that the interfacial air flow (leakage) channels are so narrow that the gas flow is mainly ballistic (the so called Knudsen limit). The implications for container closure integrity is discussed.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Crack and pull-off dynamics of adhesive, viscoelastic solids
Authors:
Martin H. Müser,
Bo N. J. Persson
Abstract:
When quickly detaching an elastomer from a counterface, viscoelasticity dramatically increases the perceived adhesion relative to its adiabatic or equilibrium value. Here, we report simulations on the sticking contact between a rigid cylinder and a viscoelastic half space revealing a maximum in the work of adhesion at intermediate pull-off velocities. Maximum tensile forces yet increase monotonica…
▽ More
When quickly detaching an elastomer from a counterface, viscoelasticity dramatically increases the perceived adhesion relative to its adiabatic or equilibrium value. Here, we report simulations on the sticking contact between a rigid cylinder and a viscoelastic half space revealing a maximum in the work of adhesion at intermediate pull-off velocities. Maximum tensile forces yet increase monotonically with the pull-off speed and the crack-tip speed in accordance with the Persson-Brener approach. As predicted theoretically, the fracture mode transitions from interfacial crack propagation to quasi-uniform bond breaking with increasing range of adhesion.
△ Less
Submitted 5 August, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Predicting COVID-19 Spread from Large-Scale Mobility Data
Authors:
Amray Schwabe,
Joel Persson,
Stefan Feuerriegel
Abstract:
To manage the COVID-19 epidemic effectively, decision-makers in public health need accurate forecasts of case numbers. A potential near real-time predictor of future case numbers is human mobility; however, research on the predictive power of mobility is lacking. To fill this gap, we introduce a novel model for epidemic forecasting based on mobility data, called mobility marked Hawkes model. The p…
▽ More
To manage the COVID-19 epidemic effectively, decision-makers in public health need accurate forecasts of case numbers. A potential near real-time predictor of future case numbers is human mobility; however, research on the predictive power of mobility is lacking. To fill this gap, we introduce a novel model for epidemic forecasting based on mobility data, called mobility marked Hawkes model. The proposed model consists of three components: (1) A Hawkes process captures the transmission dynamics of infectious diseases. (2) A mark modulates the rate of infections, thus accounting for how the reproduction number R varies across space and time. The mark is modeled using a regularized Poisson regression based on mobility covariates. (3) A correction procedure incorporates new cases seeded by people traveling between regions. Our model was evaluated on the COVID-19 epidemic in Switzerland. Specifically, we used mobility data from February through April 2020, amounting to approximately 1.5 billion trips. Trip counts were derived from large-scale telecommunication data, i.e., cell phone pings from the Swisscom network, the largest telecommunication provider in Switzerland. We compared our model against various state-of-the-art baselines in terms of out-of-sample root mean squared error. We found that our model outperformed the baselines by 15.52%. The improvement was consistently achieved across different forecast horizons between 5 and 21 days. In addition, we assessed the predictive power of conventional point of interest data, confirming that telecommunication data is superior. To the best of our knowledge, our work is the first to predict the spread of COVID-19 from telecommunication data. Altogether, our work contributes to previous research by developing a scalable early warning system for decision-makers in public health tasked with controlling the spread of infectious diseases.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
On opening crack propagation in viscoelastic solids
Authors:
B. N. J. Persson
Abstract:
We show that the Persson-Brener theory of crack propagation in viscoelastic solids gives a viscoelastic fracture energy factor $G/G_0 = 1+f$ which is nearly the same as the viscoelastic factor obtained using the cohesive-zone model. We also discuss finite-size effects and comment on the use of crack propagation theories for "solids" with a viscoelastic modulus that vanishes at zero frequency.
We show that the Persson-Brener theory of crack propagation in viscoelastic solids gives a viscoelastic fracture energy factor $G/G_0 = 1+f$ which is nearly the same as the viscoelastic factor obtained using the cohesive-zone model. We also discuss finite-size effects and comment on the use of crack propagation theories for "solids" with a viscoelastic modulus that vanishes at zero frequency.
△ Less
Submitted 5 April, 2021;
originally announced April 2021.
-
Side-leakage of facemask
Authors:
B. N. J. Persson
Abstract:
Face masks are used to trap particles (or fluid drops) in a porous material (filter) in order to avoid or reduce the transfer of particles between the human lungs (or mouth and nose) and the external environment. The air exchange between the lungs and the environment is assumed to occur through the facemask filter. However, if the resistance to air flow through the filter is high some air (and acc…
▽ More
Face masks are used to trap particles (or fluid drops) in a porous material (filter) in order to avoid or reduce the transfer of particles between the human lungs (or mouth and nose) and the external environment. The air exchange between the lungs and the environment is assumed to occur through the facemask filter. However, if the resistance to air flow through the filter is high some air (and accompanied particles) will leak through the filter-skin interface. In this paper I will present a model study of the side-leakage problem.
△ Less
Submitted 19 March, 2021;
originally announced March 2021.
-
Monitoring the COVID-19 epidemic with nationwide telecommunication data
Authors:
Joel Persson,
Jurriaan F. Parie,
Stefan Feuerriegel
Abstract:
In response to the novel coronavirus disease (COVID-19), governments have introduced severe policy measures with substantial effects on human behavior. Here, we perform a large-scale, spatio-temporal analysis of human mobility during the COVID-19 epidemic. We derive human mobility from anonymized, aggregated telecommunication data in a nationwide setting (Switzerland; February 10 - April 26, 2020)…
▽ More
In response to the novel coronavirus disease (COVID-19), governments have introduced severe policy measures with substantial effects on human behavior. Here, we perform a large-scale, spatio-temporal analysis of human mobility during the COVID-19 epidemic. We derive human mobility from anonymized, aggregated telecommunication data in a nationwide setting (Switzerland; February 10 - April 26, 2020), consisting of ~1.5 billion trips. In comparison to the same time period from 2019, human movement in Switzerland dropped by 49.1%. The strongest reduction is linked to bans on gatherings of more than 5 people, which is estimated to have decreased mobility by 24.9%, followed by venue closures (stores, restaurants, and bars) and school closures. As such, human mobility at a given day predicts reported cases 7-13 days ahead. A 1% reduction in human mobility predicts a 0.88-1.11% reduction in daily reported COVID-19 cases. When managing epidemics, monitoring human mobility via telecommunication data can support public decision-makers in two ways. First, it helps in assessing policy impact; second, it provides a scalable tool for near real-time epidemic surveillance, thereby enabling evidence-based policies.
△ Less
Submitted 11 April, 2021; v1 submitted 7 January, 2021;
originally announced January 2021.
-
Rubber adhesion and friction: role of surface energy and contamination films
Authors:
A. Tiwari,
T. Tolpekina,
Hans van Benthem,
M. K. Gunnewiek,
B. N. J. Persson
Abstract:
We study the influence of the surface energy and contamination films on rubber adhesion and sliding friction. We find that there is a transfer of molecules from the rubber to the substrate which reduces the work of adhesion and makes the rubber friction insensitive to the substrate surface energy. We show that there is no simple relation between adhesion and friction: adhesion is due to (vertical)…
▽ More
We study the influence of the surface energy and contamination films on rubber adhesion and sliding friction. We find that there is a transfer of molecules from the rubber to the substrate which reduces the work of adhesion and makes the rubber friction insensitive to the substrate surface energy. We show that there is no simple relation between adhesion and friction: adhesion is due to (vertical) detachment processes at the edge of the contact regions (opening crack propagation), while friction in many cases is determined mainly by (tangential) stick-slip instabilities of nanosized regions, within the whole sliding contact. Thus while the pull-off force in fluids may be strongly reduced (due to a reduction of the work of adhesion), the sliding friction may be only slightly affected as the area of real contact may be dry, and the frictional shear stress in the contact area nearly unaffected by the fluid.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
Spin-waves in the collinear antiferromagnetic phase of Mn$_\bf{5}$Si$_\bf{3}$
Authors:
F. J. dos Santos,
N. Biniskos,
S. Raymond,
K. Schmalzl,
M. dos Santos Dias,
P. Steffens,
J. Persson,
S. Blügel,
S. Lounis,
T. Brückel
Abstract:
By combining two independent approaches, inelastic neutron scattering measurements and density functional theory calculations, we study the spin-waves in the high-temperature collinear antiferromagnetic phase (AFM2) of Mn$_5$Si$_3$. We obtain its magnetic ground-state properties and electronic structure. This study allowed us to determine the dominant magnetic exchange interactions and magnetocrys…
▽ More
By combining two independent approaches, inelastic neutron scattering measurements and density functional theory calculations, we study the spin-waves in the high-temperature collinear antiferromagnetic phase (AFM2) of Mn$_5$Si$_3$. We obtain its magnetic ground-state properties and electronic structure. This study allowed us to determine the dominant magnetic exchange interactions and magnetocrystalline anisotropy in the AFM2 phase of Mn$_5$Si$_3$. Moreover, the evolution of the spin excitation spectrum is investigated under the influence of an external magnetic field perpendicular to the anisotropy easy-axis. The low energy magnon modes show a different magnetic field dependence which is a direct consequence of their different precessional nature. Finally, possible effects related to the Dzyaloshinskii-Moriya interaction are also considered.
△ Less
Submitted 9 December, 2020; v1 submitted 10 November, 2020;
originally announced November 2020.
-
A simple model for viscoelastic crack propagation
Authors:
B. N. J. Persson
Abstract:
When a crack propagate in a viscoelastic solid energy dissipation can occur very far from the crack tip where the stress field may be very different from the $r^{-1/2}$ singular form expected close to the crack tip. Most theories of crack propagation focus on the near crack-tip region. Remarkable, here I show that a simple theory which does not account for the nature of the stress field in the nea…
▽ More
When a crack propagate in a viscoelastic solid energy dissipation can occur very far from the crack tip where the stress field may be very different from the $r^{-1/2}$ singular form expected close to the crack tip. Most theories of crack propagation focus on the near crack-tip region. Remarkable, here I show that a simple theory which does not account for the nature of the stress field in the near crack-tip region result in a crack propagation energy in semi-quantitative agreement with a theory based on the stress field in the near crack-tip region. I consider both opening and closing crack propagation, and show that for closing crack propagation in viscoelastic solids, some energy dissipation processes must occur in thecrack tip process zone.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Viscoelastic crack propagation: review of theories and applications
Authors:
N. Rodriguez,
P. Mangiagalli,
B. N. J. Persson
Abstract:
We review a theory of crack propagation in viscoelastic solids. We consider both cracks in infinite systems and in finite sized systems. As applications of the theory we consider two adhesion problems, namely pressure sensitive adhesives and the ball-flat adhesion problem. We also study crack propagation in the pig skin dermis, which is of medical relevance, and rubber wear in the context of tires…
▽ More
We review a theory of crack propagation in viscoelastic solids. We consider both cracks in infinite systems and in finite sized systems. As applications of the theory we consider two adhesion problems, namely pressure sensitive adhesives and the ball-flat adhesion problem. We also study crack propagation in the pig skin dermis, which is of medical relevance, and rubber wear in the context of tires.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Cylinder-flat contact mechanics with surface roughness
Authors:
A. Tiwari,
B. N. J. Persson
Abstract:
We study the nominal (ensemble averaged) contact pressure $p(x)$ acting on a cylinder squeezed in contact with an elastic half-space with random surface roughness. The contact pressure is Hertzian-like for $α< 0.01$ and Gaussian-like for $α> 10$, where the dimensionless parameter $α= h_{\rm rms}/δ$ is the ratio between the root-mean-square roughness amplitude and the penetration for the smooth sur…
▽ More
We study the nominal (ensemble averaged) contact pressure $p(x)$ acting on a cylinder squeezed in contact with an elastic half-space with random surface roughness. The contact pressure is Hertzian-like for $α< 0.01$ and Gaussian-like for $α> 10$, where the dimensionless parameter $α= h_{\rm rms}/δ$ is the ratio between the root-mean-square roughness amplitude and the penetration for the smooth surfaces case (Hertz contact).
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
Fluid leakage in metallic seals
Authors:
F. J. Fischer,
K. Schmitz,
A. Tiwari,
B. N. J. Persson
Abstract:
Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic deformation would occur one expects in most cases large fluid flow channels between the contacting metallic bodies, and large fluid leakage. However, in most applications…
▽ More
Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic deformation would occur one expects in most cases large fluid flow channels between the contacting metallic bodies, and large fluid leakage. However, in most applications plastic deformation occurs, at least at the asperity level, which allows the surfaces to approach each other to such an extent that fluid leakage often can be neglected. In this study, we present an experimental set-up for studying the fluid leakage in metallic seals. We study the water leakage between a steel sphere and a steel body (seat) with a conical surface. The experimental results are found to be in good quantitative agreement with a (fitting-parameter-free) theoretical model. The theory predicts that the plastic deformations reduce the leak-rate by a factor $\approx 8$
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
Two comments on adhesion
Authors:
A. Tiwari,
J. Wang,
B. N. J. Persson
Abstract:
The adhesion paradox refers to the observation that for most solid objects no adhesion can be detected when they are separated from a state of molecular contact. The adhesion paradox results from surface roughness, and we present experimental and theoretical results which shows that adhesion in most cases is "killed" by the longest wavelength roughness. Adhesion experiments between a human finger…
▽ More
The adhesion paradox refers to the observation that for most solid objects no adhesion can be detected when they are separated from a state of molecular contact. The adhesion paradox results from surface roughness, and we present experimental and theoretical results which shows that adhesion in most cases is "killed" by the longest wavelength roughness. Adhesion experiments between a human finger and a clean glass plate were carried out, and for a dry finger, no macroscopic adhesion occurred. We suggest that the observed decrease in the contact area with increasing shear force results from non-adhesive finger-glass contact mechanics, involving large deformations of a complex layered material.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Cylinder-flat contact mechanics during sliding
Authors:
J. Wang,
A. Tiwari,
I. M. Sivebaek,
B. N. J. Persson
Abstract:
Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastic block (cylinder) with a ${\rm cos} (q_0 x)$ surface height profile is sliding in adhesive contact on a rigid flat substrate.The atoms on the block interact with the substrate atoms by Lennard-Jones (LJ) potentials, and we consider both commensurate and(nearly) incommensurate contacts…
▽ More
Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastic block (cylinder) with a ${\rm cos} (q_0 x)$ surface height profile is sliding in adhesive contact on a rigid flat substrate.The atoms on the block interact with the substrate atoms by Lennard-Jones (LJ) potentials, and we consider both commensurate and(nearly) incommensurate contacts. For the incommensurate system the friction force fluctuates between positive and negative values, with an amplitude proportional to the sliding speed, but with the average close to zero. For the commensurate system the (time-averaged) friction force is much larger and nearly velocity independent. For both type of systems the width of the contact region is velocity independent even when, for the commensurate case, the frictional shear stress increases from zero (before sliding) to $\approx 0.1 \ {\rm MPa}$ during sliding. This frictional shear stress, and the elastic modulus used, are typical for Polydimethylsiloxan (PDMS) rubber sliding on a glass surface, and we conclude that the reduction in the contact area observed in some experiments when increasing the tangential force must be due to effects not included in our model study, such as viscoelasticity or elastic nonlinearity
△ Less
Submitted 2 July, 2020;
originally announced July 2020.
-
Internet of Threats Introspection in Dynamic Intelligent Virtual Sensing
Authors:
Victor R. Kebande,
Joseph Bugeja,
Jan A. Persson
Abstract:
Continued ubiquity of communication infrastructure across Internet of Things (IoT) ecosystems has seen persistent advances of dynamic, intelligent, virtualised sensing and actuation. This has led to effective interaction across the connected ecosystem of -things. Furthermore, this has enabled the creation of smart environments that has created the need for the development of different IoT protocol…
▽ More
Continued ubiquity of communication infrastructure across Internet of Things (IoT) ecosystems has seen persistent advances of dynamic, intelligent, virtualised sensing and actuation. This has led to effective interaction across the connected ecosystem of -things. Furthermore, this has enabled the creation of smart environments that has created the need for the development of different IoT protocols that support the relaying of information across billions of electronic devices over the Internet. That notwithstanding, the phenomenon of virtual sensors that are supported by IoT technologies like Wireless Sensor Networks (WSNs), RFID, WIFI, Bluetooth, ZigBee, IEEE 802.15.4, etc., emulates physical sensors, and enables more efficient resource management through the dynamic allocation of virtual sensor resources. A distinctive example of this has been the proposition of the Dynamic Intelligent Virtual Sensors (DIVS). This DIVS concept is a novel proposition that allows sensing to be done by the use of logical instances through the use of labeled data. This allows for making accurate predictions during data fusion. However, a potential security attack on DIVS may end up providing false labels during the User Feedback Process (UFP), which may interfere with the accuracy of DIVS. This paper investigates the threat landscape in DIVS when employed in IoT ecosystems, in order to identify the extent to which the severity of these threats may hinder accurate prediction of DIVS in IoT, based on labeled data.
△ Less
Submitted 21 June, 2020;
originally announced June 2020.
-
Plastic deformation of rough metallic surfaces
Authors:
A. Tiwari,
A. Almqvist,
B. N. J. Persson
Abstract:
We present experimental and theoretical results for the surface topography of a plastically deformed metallic (aluminum) block. When a hard spherical body (here a steel-, silica glass- or silicon nitride ball) with a smooth surface is indented in a metal block with a nominally flat, but still rough, surface, a spherical-cup-like indentation result due to plastic flow. The surface roughness in the…
▽ More
We present experimental and theoretical results for the surface topography of a plastically deformed metallic (aluminum) block. When a hard spherical body (here a steel-, silica glass- or silicon nitride ball) with a smooth surface is indented in a metal block with a nominally flat, but still rough, surface, a spherical-cup-like indentation result due to plastic flow. The surface roughness in the indented region is, however, not entirely flattened. The long wavelength (macroasperity) content of the roughness result from the roughness on the original (aluminum) surface, but now plastically deformed. The roughness at short length scale, in the plastically deformed macroasperity contact regions, result from the roughness on the hard ball, and from inhomogeneous plastic flow.
We model the contact mechanics using the boundary element method, combined with a simple numerical procedure to take into account the plastic flow. The theory can semi-quantitatively describe the modification of the roughness by the plastic flow. Since the fluid leakage of metallic seals in most cases is determined by the long wavelength roughness, we predict that the leakage can be estimated based on the elastoplastic contact mechanics model employed here.
The plastic deformations of surfaces of some glassy polymers is very different from what we observed for aluminum, which we attribute to strong work-hardening and to inhomogeneous plastic flow for the polymers. Thus the numerical procedure to account for the plastic flow proposed here cannot be applied to glassy polymers in general.
△ Less
Submitted 19 June, 2020;
originally announced June 2020.
-
Dependency of Sliding Friction for Two Dimensional Systems on Electronegativity
Authors:
Jianjun Wang,
Avinash Tiwari,
Yang Huang,
Yu Jia,
B. N. J. Persson
Abstract:
We study the role of electronegativity in sliding friction for five different two dimensional (2D) monolayer systems using density functional theory (DFT) with van der Waals (vdW) corrections. We show that the friction between the commensurate 2D layered systems depends strongly on the electronegativity difference of the involved atoms. All the 2D layered structures exhibit almost the same magnitu…
▽ More
We study the role of electronegativity in sliding friction for five different two dimensional (2D) monolayer systems using density functional theory (DFT) with van der Waals (vdW) corrections. We show that the friction between the commensurate 2D layered systems depends strongly on the electronegativity difference of the involved atoms. All the 2D layered structures exhibit almost the same magnitude of friction force when sliding along the nonpolar path, independent of the material and the surface structures. In contrast, for sliding friction along the polar path, the friction force obeys a universal linear scaling law as a function of the electronegativity difference of its constituent atoms. Further analyses demonstrate that atomic dipoles in the 2D monolayers induced by the electronegativity difference enhance the corrugation of charge distribution and increase the sliding barrier accordingly. Our studies reveal that electronegativity plays an important role in friction of low dimensional systems, and will provide a strategy for designing nanoscale devices further.
△ Less
Submitted 14 June, 2020;
originally announced June 2020.
-
Interfacial fluid flow for systems with anisotropic roughness
Authors:
B. N. J. Persson
Abstract:
I discuss fluid flow at the interface between solids with anisotropic roughness. I show that for randomly rough surfaces with anisotropic roughness, the contact area percolate at the same relative contact area as for isotropic roughness, and that the Bruggeman effective medium theory and the critical junction theory give nearly the same results for the fluid flow conductivity. This shows that, in…
▽ More
I discuss fluid flow at the interface between solids with anisotropic roughness. I show that for randomly rough surfaces with anisotropic roughness, the contact area percolate at the same relative contact area as for isotropic roughness, and that the Bruggeman effective medium theory and the critical junction theory give nearly the same results for the fluid flow conductivity. This shows that, in most cases, the surface roughness observed at high magnification is irrelevant for fluid flow problems such as the leakage of static seals, and fluid squeeze-out.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
On the origin of sliding friction: Role of lattice trapping
Authors:
J. Wang,
A. Tiwari,
I. M. Sivebaek,
B. N. J Persson
Abstract:
Using molecular dynamics we study the dependence of the friction force on the sliding speed when an elastic slab (block) is sliding on a rigid substrate with a ${\rm sin} (q_0 x)$ surface height profile. The friction force is nearly velocity independent due to phonon emission at the closing and opening crack tips, where rapid atomic snap-in and -out events occur during sliding. The rapid events re…
▽ More
Using molecular dynamics we study the dependence of the friction force on the sliding speed when an elastic slab (block) is sliding on a rigid substrate with a ${\rm sin} (q_0 x)$ surface height profile. The friction force is nearly velocity independent due to phonon emission at the closing and opening crack tips, where rapid atomic snap-in and -out events occur during sliding. The rapid events result from lattice trapping and are closely related to the velocity gap and hysteresis effects observed in model studies of crack propagation in solids. This indicates that the friction force is dominated by processes occurring at the edges of the contact area, which is confirmed by calculations showing that the friction force is independent of the normal force. The friction force increases drastically when the sliding velocity approaches the solid transverse sound velocity, as expected from the theory of cracks.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Sphere and cylinder contact mechanics during slip
Authors:
J. Wang,
A. Tiwari,
I. Sivebaek,
B. N. J. Persson
Abstract:
Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastically soft slab (block) is sliding on a rigid substrate with a ${\rm sin} (q_0 x)$ surface height profile. The atoms on the block interact with the substrate atoms by Lennard-Jones potentials. We consider contacts with and without adhesion. We found that the contact area and the fricti…
▽ More
Using molecular dynamics (MD) we study the dependency of the contact mechanics on the sliding speed when an elastically soft slab (block) is sliding on a rigid substrate with a ${\rm sin} (q_0 x)$ surface height profile. The atoms on the block interact with the substrate atoms by Lennard-Jones potentials. We consider contacts with and without adhesion. We found that the contact area and the friction force are nearly velocity independent for small velocities ($v < 0.25 \ {\rm m/s}$) in spite of the fact that the shear stress in the contact area is rather non-uniform. For the case of no adhesion the friction coefficient is very small. For the case of adhesion the friction coefficient is higher, and is mainly due to energy dissipation at the opening crack tip, where rapid atomic snap-off events occur during sliding. Adhesion experiments between a human finger and a clean glass plate were carried out, and for a dry finger no macroscopic adhesion occurred. We suggest that the observed decrease in the contact area with increasing shear force results from non-adhesive finger-glass contact mechanics, involving large deformations of a complex layered material.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
High-temperature magnetism and crystallography of a YCrO$_3$ single crystal
Authors:
Yinghao Zhu,
Si Wu,
Bao Tu,
Shangjian Jin,
Ashfia Huq,
Joerg Persson,
Haoshi Gao,
Defang Ouyang,
Zhubing He,
Dao-Xin Yao,
Zikang Tang,
Hai-Feng Li
Abstract:
Magnetization measurements and time-of-flight neutron powder-diffraction studies on the high-temperature (300--980 K) magnetism and crystal structure (321--1200 K) of a pulverized YCrO$_3$ single crystal have been performed. Temperature-dependent inverse magnetic susceptibility coincides with a piecewise linear function with five regimes, with which we fit a Curie-Weiss law and calculate the frust…
▽ More
Magnetization measurements and time-of-flight neutron powder-diffraction studies on the high-temperature (300--980 K) magnetism and crystal structure (321--1200 K) of a pulverized YCrO$_3$ single crystal have been performed. Temperature-dependent inverse magnetic susceptibility coincides with a piecewise linear function with five regimes, with which we fit a Curie-Weiss law and calculate the frustration factor $f$. The fit results indicate a formation of magnetic polarons between 300 and 540 K and a very strong magnetic frustration. By including one factor $η$ that represents the degree of spin interactions into the Brillouin function, we can fit well the applied-magnetic-field dependence of magnetization. No structural phase transition was observed from 321 to 1200 K. The average thermal expansions of lattice configurations (\emph{a}, \emph{b}, \emph{c}, and \emph{V}) obey well the Gr$\ddot{\textrm{u}}$neisen approximations with an anomaly appearing around 900 K, implying an isosymmetric structural phase transition, and display an anisotropic character along the crystallographic \emph{a}, \emph{b}, and \emph{c} axes with the incompressibility $K^a_0 > K^c_0 > K^b_0$. It is interesting to find that at 321 K, the local distortion size $Δ$(O2) $\approx$ 1.96$Δ$(O1) $\approx$ 4.32$Δ$(Y) $\approx$ 293.89$Δ$(Cr). Based on the refined Y-O and Cr-O bond lengths, we deduce the local distortion environments and modes of Y, Cr, O1, and O2 ions. Especially, the Y and O2 ions display obvious atomic displacement and charge subduction, which may shed light on the dielectric property of the YCrO$_3$ compound. Additionally, by comparing Kramers Mn$^{3+}$ with non-Kramers Cr$^{3+}$ ions, it is noted that being a Kramers or non-Kramers ion can strongly affect the local distortion size, whereas, it may not be able to change the detailed distortion mode.
△ Less
Submitted 4 July, 2020; v1 submitted 26 January, 2020;
originally announced January 2020.
-
Comment on "On the Origin of Frictional Energy Dissipation"
Authors:
B. N. J. Persson
Abstract:
In their interesting study (Ref. [1]) Hu et al have shown that for a simple "harmonium" solid model the slip-induced motion of surface atoms is close to critically damped. This result is in fact well known from studies of vibrational damping of atoms and molecules at surfaces. However, for real practical cases the situation may be much more complex and the conclusions of Hu et al invalid.
In their interesting study (Ref. [1]) Hu et al have shown that for a simple "harmonium" solid model the slip-induced motion of surface atoms is close to critically damped. This result is in fact well known from studies of vibrational damping of atoms and molecules at surfaces. However, for real practical cases the situation may be much more complex and the conclusions of Hu et al invalid.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
On the role of flexoelectricity in triboelectricity for randomly rough surfaces
Authors:
B. N. J. Persson
Abstract:
I show how flexoelectricity result in a fluctuating surface electric potential when elastic solids with random roughness are squeezed into contact. The flexoelectric potential may induce surface charge distributions and hence contribute to triboelectricity. Using the developed theory I analyze the Kelvin Force Microscopy data of Baytekin et al for the electric potential above a polydimethylsiloxan…
▽ More
I show how flexoelectricity result in a fluctuating surface electric potential when elastic solids with random roughness are squeezed into contact. The flexoelectric potential may induce surface charge distributions and hence contribute to triboelectricity. Using the developed theory I analyze the Kelvin Force Microscopy data of Baytekin et al for the electric potential above a polydimethylsiloxane (PDMS) surface after it was peeled away from another PDMS surface
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Electric field effect in heat transfer in 2D devices
Authors:
A. I. Volokitin,
B. N. J. Persson
Abstract:
We calculate heat transfer between a 2D sheet (e.g. graphene) and a dielectric in presence of a gate voltage. The gate potential induces surface charge densities on the sheet and dielectric, which results in electric field, which is coupled to the surface displacements and, as a consequence, resulting an additional contributions to the radiative heat transfer. The electrostatic and van der Waals i…
▽ More
We calculate heat transfer between a 2D sheet (e.g. graphene) and a dielectric in presence of a gate voltage. The gate potential induces surface charge densities on the sheet and dielectric, which results in electric field, which is coupled to the surface displacements and, as a consequence, resulting an additional contributions to the radiative heat transfer. The electrostatic and van der Waals interactions between the surface displacement result in the phonon heat transfer, which we calculate taking into account the nonlocality of these interactions. Numerical calculations are presented for heat transfer between graphene and a SiO$_2$ substrate.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
Electroadhesion for soft adhesive pads and robotics: theory and numerical results
Authors:
Bo N. J. Persson,
Jianglong Guo
Abstract:
Soft adhesive pads are needed for many robotics applications, and one approach is based on electroadhesion. Here we present a general analytic model and numerical results for electroadhesion for soft solids with arbitrary time-dependent applied voltage, and arbitrary dielectric response of the solids, and including surface roughness. We consider the simplest coplanar-plate-capacitor model with a p…
▽ More
Soft adhesive pads are needed for many robotics applications, and one approach is based on electroadhesion. Here we present a general analytic model and numerical results for electroadhesion for soft solids with arbitrary time-dependent applied voltage, and arbitrary dielectric response of the solids, and including surface roughness. We consider the simplest coplanar-plate-capacitor model with a periodic array of conducting strips located close to the surface of the adhesive pad, and discuss the optimum geometrical arrangement to obtain the maximal electroadhesion force. For surfaces with roughness the (non-contact) gap between the solids will strongly influence the electroadhesion, and we show how the electroadhesion force can be calculated using a contact mechanics theory for elastic solids. The theory and models we present can be used to optimize the design of adhesive pads for robotics application.
△ Less
Submitted 3 August, 2019;
originally announced August 2019.
-
Theory for diffusive and ballistic air leakage and its application to suction cups
Authors:
A. Tiwari,
B. N. J. Persson
Abstract:
We have developed a theory of air leakage at interfaces between two elastic solids with application to suction cups in contact with randomly rough surfaces. We present an equation for the airflow in narrow constrictions which interpolate between the diffusive and ballistic (Knudsen) air-flow limits. To test the theory we performed experiments using two different suction cups, made from soft polyvi…
▽ More
We have developed a theory of air leakage at interfaces between two elastic solids with application to suction cups in contact with randomly rough surfaces. We present an equation for the airflow in narrow constrictions which interpolate between the diffusive and ballistic (Knudsen) air-flow limits. To test the theory we performed experiments using two different suction cups, made from soft polyvinylchloride (PVC), in contact with sandblasted polymethylmethacrylate (PMMA) plates. We found that the measured time to detatch (lifetime) of suction cups were in good agreement with theory, except for surfaces with the root-mean-square (rms) roughness below $\approx 1 \ {\rm μm}$, where diffusion of plasticizer from the PVC to the PMMA surface caused blockage of critical constrictions. Suction cup volume, stiffness and elastic modulus have a huge influence on the air leakage and hence the failure time of the cups. Based on our research we propose an improved biomimetic design of suction cups, that could show improved failure times in varying degree of roughness under dry and wet environments.
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
Physics of suction cups in air and in water
Authors:
A. Tiwari,
B. N. J. Persson
Abstract:
We present experimental results for the dependency of the pull-off time (failure time) on the pull-off force for suction cups in the air and in water. The results are analyzed using a theory we have developed for the contact between suction cups and randomly rough surfaces. The theory predicts the dependency of the pull-off time (failure time) on the pull-off force, and is tested with measurements…
▽ More
We present experimental results for the dependency of the pull-off time (failure time) on the pull-off force for suction cups in the air and in water. The results are analyzed using a theory we have developed for the contact between suction cups and randomly rough surfaces. The theory predicts the dependency of the pull-off time (failure time) on the pull-off force, and is tested with measurements performed on suction cups made from a soft polyvinyl chloride (PVC). As substrates we used sandblasted poly(methyl methacrylate) (PMMA). The theory is in good agreement with the experiments in air, except for surfaces with the root-mean-square (rms) roughness below $\approx 1 \ {\rm μm}$, where we observed lifetimes much longer than predicted by the theory. We show that this is due to out-diffusion of plasticizer from the soft PVC, which block the critical constrictions along the air flow channels. In water some deviation between theory and experiments is observed which may be due to capillary forces. We discuss the role of cavitation for the failure time of suction cups in water.
△ Less
Submitted 13 November, 2020; v1 submitted 22 May, 2019;
originally announced May 2019.
-
Total interference between nuclear and magnetovibrational one-phonon scattering cross sections
Authors:
S. Raymond,
N. Biniskos,
K. Schmalzl,
J. Persson,
T. Brückel
Abstract:
A full phonon intensity cancellation is reported in a longitudinal polarized inelastic neutron scattering experiment performed on the magnetocaloric compound MnFe$_{4}$Si$_{3}$, a ferromagnet with $T_{Curie}$ $\approx$ 305 K. The TA[100] phonon polarized along the $c$-axis measured from the Brillouin zone center $\textbf{G}$=(0, 0, 2) is observed only in one ($σ_{z}^{++}$) of the two non-spin-flip…
▽ More
A full phonon intensity cancellation is reported in a longitudinal polarized inelastic neutron scattering experiment performed on the magnetocaloric compound MnFe$_{4}$Si$_{3}$, a ferromagnet with $T_{Curie}$ $\approx$ 305 K. The TA[100] phonon polarized along the $c$-axis measured from the Brillouin zone center $\textbf{G}$=(0, 0, 2) is observed only in one ($σ_{z}^{++}$) of the two non-spin-flip polarization channels and is absent in the other one ($σ_{z}^{--}$) at low temperatures. This effect disappears at higher temperatures, in the vicinity of $T_{Curie}$, where the phonon is measured in both channels with nonetheless marked different intensities. The effect is understood as originating from nuclear-magnetic interference between the nuclear one-phonon and the magnetovibrational one-phonon scattering cross-sections. The total cancellation reported is accidental, i.e. does not correspond to a systematic effect, as established by measurements in different Brillouin zones.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Spin-fluctuations drive the inverse magnetocaloric effect in Mn5Si3
Authors:
N. Biniskos,
K. Schmalzl,
S. Raymond,
S. Petit,
P. Steffens,
J. Persson,
T. Brueckel
Abstract:
Inelastic neutron scattering measurements were performed on single crystals of the antiferromagnetic compound Mn5Si3 in order to investigate the relation between the spin dynamics and the magneto-thermodynamic properties. It is shown that among the two stable antiferromagnetic phases of this compound, the high temperature one has an unusual magnetic excitation spectrum where propagative spin-waves…
▽ More
Inelastic neutron scattering measurements were performed on single crystals of the antiferromagnetic compound Mn5Si3 in order to investigate the relation between the spin dynamics and the magneto-thermodynamic properties. It is shown that among the two stable antiferromagnetic phases of this compound, the high temperature one has an unusual magnetic excitation spectrum where propagative spin-waves and diffuse spin-fluctuations coexist. Moreover, it is evidenced that the inverse magnetocaloric effect of Mn5Si3, the cooling by adiabatic magnetization, is associated with field induced spin-fluctuations.
△ Less
Submitted 21 February, 2018;
originally announced February 2018.
-
Influence of anisotropic surface roughness on lubricated rubber friction with application to hydraulic seals
Authors:
M. Scaraggi,
J. Angerhausen,
L. Dorogin,
H. Murrenhoff,
B. N. J. Persson
Abstract:
Machine elements and mechanical components have often surfaces with anisotropic roughness, which may result from the machining processes, e.g. grinding, or from wear. Hence, it is important to understand how surface roughness anisotropy affects contact mechanics properties, such as friction and the interface separation, which is important for lubricated contacts. Here we extend and apply a multisc…
▽ More
Machine elements and mechanical components have often surfaces with anisotropic roughness, which may result from the machining processes, e.g. grinding, or from wear. Hence, it is important to understand how surface roughness anisotropy affects contact mechanics properties, such as friction and the interface separation, which is important for lubricated contacts. Here we extend and apply a multiscale mean-field model to the lubricated contact between a soft (e.g. rubber) elastic solid and a rigid countersurface. We consider surfaces with anisotropic surface roughness, and discuss how the fluid flow factors and friction factors depend on the roughness. We present an experimental study of the lubricated sliding contact between a nitrile butadiene rubber O-ring and steel surfaces with different types of isotropic and anisotropic surface roughness. The good quantitative comparison between the experimental results and the theory predictions suggests that the multiscale lubrication mechanisms are accurately captured by the theory.
△ Less
Submitted 6 April, 2017;
originally announced April 2017.
-
Elastohydrodynamics for soft solids with surface roughness: transient effects
Authors:
M. Scaraggi,
L. Dorogin,
J. Angerhausen,
H. Murrenhoff,
B. N. J. Persson
Abstract:
A huge number of technological and biological systems involves the lubricated contact between rough surfaces of soft solids in relative accelerated motion. Examples include dynamical rubber seals and the human joints. In this study we consider an elastic cylinder with random surface roughness in accelerated sliding motion on a rigid, perfectly flat (no roughness) substrate in a fluid. We calculate…
▽ More
A huge number of technological and biological systems involves the lubricated contact between rough surfaces of soft solids in relative accelerated motion. Examples include dynamical rubber seals and the human joints. In this study we consider an elastic cylinder with random surface roughness in accelerated sliding motion on a rigid, perfectly flat (no roughness) substrate in a fluid. We calculate the surface deformations, interface separation and the contributions to the friction force and the normal force from the area of real contact and from the fluid. The driving velocity profile as a function of time is assumed to be either a sine-function, or a linear multi-ramp function. We show how the squeeze-in and squeeze-out processes, occurring in accelerated sliding, quantitatively affect the Stribeck curve with respect to the steady sliding. Finally, the theory results are compared to experimental data.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.