-
Model-free Rayleigh weight from x-ray Thomson scattering measurements
Authors:
Tobias Dornheim,
Hannah M. Bellenbaum,
Mandy Bethkenhagen,
Stephanie B. Hansen,
Maximilian P. Böhme,
Tilo Döppner,
Luke B. Fletcher,
Thomas Gawne,
Dirk O. Gericke,
Sebastien Hamel,
Dominik Kraus,
Michael J. MacDonald,
Zhandos A. Moldabekov,
Thomas R. Preston,
Ronald Redmer,
Maximilian Schörner,
Sebastian Schwalbe,
Panagiotis Tolias,
Jan Vorberger
Abstract:
X-ray Thomson scattering (XRTS) has emerged as a powerful tool for the diagnostics of matter under extreme conditions. In principle, it gives one access to important system parameters such as the temperature, density, and ionization state, but the interpretation of the measured XRTS intensity usually relies on theoretical models and approximations. In this work, we show that it is possible to extr…
▽ More
X-ray Thomson scattering (XRTS) has emerged as a powerful tool for the diagnostics of matter under extreme conditions. In principle, it gives one access to important system parameters such as the temperature, density, and ionization state, but the interpretation of the measured XRTS intensity usually relies on theoretical models and approximations. In this work, we show that it is possible to extract the Rayleigh weight -- a key property that describes the electronic localization around the ions -- directly from the experimental data without the need for any model calculations or simulations. As a practical application, we consider an experimental measurement of strongly compressed Be at the National Ignition Facility (NIF) [Döppner \emph{et al.}, \textit{Nature} \textbf{618}, 270-275 (2023)]. In addition to being interesting in their own right, our results will open up new avenues for diagnostics from \emph{ab initio} simulations, help to further constrain existing chemical models, and constitute a rigorous benchmark for theory and simulations.
△ Less
Submitted 13 September, 2024;
originally announced September 2024.
-
Formation of high-aspect-ratio nanocavity in LiF crystal using a femtosecond of x-ray FEL pulse
Authors:
Sergey S. Makarov,
Sergey A. Grigoryev,
Vasily V. Zhakhovsky,
Petr Chuprov,
Tatiana A. Pikuz,
Nail A. Inogamov,
Victor V. Khokhlov,
Yuri V. Petrov,
Eugene Perov,
Vadim Shepelev,
Takehisa Shobu,
Aki Tominaga,
Ludovic Rapp,
Andrei V. Rode,
Saulius Juodkazis,
Mikako Makita,
Motoaki Nakatsutsumi,
Thomas R. Preston,
Karen Appel,
Zuzana Konopkova,
Valerio Cerantola,
Erik Brambrink,
Jan-Patrick Schwinkendorf,
István Mohacsi,
Vojtech Vozda
, et al. (8 additional authors not shown)
Abstract:
Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed materia…
▽ More
Sub-picosecond optical laser processing of metals is actively utilized for modification of a heated surface layer. But for deeper modification of different materials a laser in the hard x-ray range is required. Here, we demonstrate that a single 9-keV x-ray pulse from a free-electron laser can form a um-diameter cylindrical cavity with length of ~1 mm in LiF surrounded by shock-transformed material. The plasma-generated shock wave with TPa-level pressure results in damage, melting and polymorphic transformations of any material, including transparent and non-transparent to conventional optical lasers. Moreover, cylindrical shocks can be utilized to obtain a considerable amount of exotic high-pressure polymorphs. Pressure wave propagation in LiF, radial material flow, formation of cracks and voids are analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final structure with the long cavity. Similar results can be produced with semiconductors and ceramics, which opens a new pathway for development of laser material processing with hard x-ray pulses.
△ Less
Submitted 5 September, 2024;
originally announced September 2024.
-
Effects of Mosaic Crystal Instrument Functions on X-ray Thomson Scattering Diagnostics
Authors:
Thomas Gawne,
Hannah Bellenbaum,
Luke B. Fletcher,
Karen Appel,
Carsten Baehtz,
Victorien Bouffetier,
Erik Brambrink,
Danielle Brown,
Attila Cangi,
Adrien Descamps,
Sebastian Göde,
Nicholas J. Hartley,
Marie-Luise Herbert,
Philipp Hesselbach,
Hauke Höppner,
Oliver S. Humphries,
Zuzana Konôpková,
Alejandro Laso Garcia,
Björn Lindqvist,
Julian Lütgert,
Michael J. MacDonald,
Mikako Makita,
Willow Martin,
Mikhail Mishchenko,
Zhandos A. Moldabekov
, et al. (14 additional authors not shown)
Abstract:
Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the sp…
▽ More
Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the spectrometer instrument function (IF), and without careful consideration of the IF one risks misdiagnosing system conditions. Here, we consider in detail the IF of 40 $μ$m and 100 $μ$m mosaic HAPG crystals, and how the broadening varies across the spectrometer in an energy range of 6.7-8.6 keV. Notably, we find a strong asymmetry in the shape of the IF towards higher energies. As an example, we consider the effect of the asymmetry in the IF on the temperature inferred via XRTS for simulated 80 eV CH plasmas, and find that the temperature can be overestimated if an approximate symmetric IF is used. We therefore expect a detailed consideration of the full IF will have an important impact on system properties inferred via XRTS in both forward modelling and model-free approaches.
△ Less
Submitted 9 August, 2024; v1 submitted 5 June, 2024;
originally announced June 2024.
-
New bounds on heavy axions with an X-ray free electron laser
Authors:
Jack W. D. Halliday,
Giacomo Marocco,
Konstantin A. Beyer,
Charles Heaton,
Motoaki Nakatsutsumi,
Thomas R. Preston,
Charles D. Arrowsmith,
Carsten Baehtz,
Sebastian Goede,
Oliver Humphries,
Alejandro Laso Garcia,
Richard Plackett,
Pontus Svensson,
Georgios Vacalis,
Justin Wark,
Daniel Wood,
Ulf Zastrau,
Robert Bingham,
Ian Shipsey,
Subir Sarkar,
Gianluca Gregori
Abstract:
We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While…
▽ More
We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While similar searches have been performed previously at a 3^rd generation synchrotron [1], our work demonstrates improved sensitivity, exploiting the higher brightness of X-rays at EuXFEL.
△ Less
Submitted 6 July, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
The importance of temperature-dependent collision frequency in PIC simulation on nanometric density evolution of highly-collisional strongly-coupled dense plasmas
Authors:
Mohammadreza Banjafar,
Lisa Randolph,
Lingen Huang,
S. V. Rahul,
Thomas R. Preston,
Toshinori Yabuuchi,
Mikako Makita,
Nicholas P. Dover,
Sebastian Göde,
Akira Kon,
James K. Koga,
Mamiko Nishiuchi,
Michael Paulus,
Christian Rödel,
Michael Bussmann,
Thomas E. Cowan,
Christian Gutt,
Adrian P. Mancuso,
Thomas Kluge,
Motoaki Nakatsutsumi
Abstract:
Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D…
▽ More
Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D3V) PIC simulation that features the realistic collision frequency around the Fermi temperature and atomic-scale cell size. The results are compared with state-of-the-art experimental results as well as with hydrodynamic simulation. We found that the PIC simulation is capable of simulating the nanoscale dynamics of solid-density plasmas around the Fermi temperature up to $\sim$2~ps driven by a laser pulse at the moderate intensity of $10^{14-15}$~$\mathrm{W/cm^{2}}$, by comparing with the state-of-the-art experimental results. The reliability of the simulation can be further improved in the future by implementing multi-dimensional kinetics and radiation transport.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering
Authors:
Lisa Randolph,
Mohammadreza Banjafar,
Toshinori Yabuuchi,
Carsten Baehtz,
Michael Bussmann,
Nick P. Dover,
Lingen Huang,
Yuichi Inubushi,
Gerhard Jakob,
Mathias Kläui,
Dmitriy Ksenzov,
Mikako Makita,
Kohei Miyanishi,
Mamiko Nishiushi,
Özgül Öztürk,
Michael Paulus,
Alexander Pelka,
Thomas R. Preston,
Jan-Patrick Schwinkendorf,
Keiichi Sueda,
Tadashi Togashi,
Thomas E. Cowan,
Thomas Kluge,
Christian Gutt,
Motoaki Nakatsutsumi
Abstract:
Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In…
▽ More
Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.
△ Less
Submitted 26 April, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
Ultrafast Heating Induced Suppression of $d$-band Dominance in the Electronic Excitation Spectrum of Cuprum
Authors:
Zhandos Moldabekov,
Thomas D. Gawne,
Sebastian Schwalbe,
Thomas R. Preston,
Jan Vorberger,
Tobias Dornheim
Abstract:
The combination of isochoric heating of solids by free electron lasers (FEL) and in situ diagnostics by X-ray Thomson scattering (XRTS) allows for measurements of material properties at warm dense matter (WDM) conditions relevant for astrophysics, inertial confinement fusion, and material science. In the case of metals, the FEL beam pumps energy directly into electrons with the lattice structure o…
▽ More
The combination of isochoric heating of solids by free electron lasers (FEL) and in situ diagnostics by X-ray Thomson scattering (XRTS) allows for measurements of material properties at warm dense matter (WDM) conditions relevant for astrophysics, inertial confinement fusion, and material science. In the case of metals, the FEL beam pumps energy directly into electrons with the lattice structure of ions being nearly unaffected. This leads to a unique transient state that gives rise to a set of interesting physical effects, which can serve as a reliable testing platform for WDM theories. In this work, we present extensive linear-response time-dependent density functional theory (TDDFT) results for the electronic dynamic structure factor of isochorically heated copper with a face-centered cubic lattice. At ambient conditions, the plasmon is heavily damped due to the presence of $d$-band excitations, and its position is independent of the wavenumber. In contrast, the plasmon feature starts to dominate the excitation spectrum and has a Bohm-Gross type plasmon dispersion for temperatures $T \geq 4~{\rm eV}$, where the quasi-free electrons in the interstitial region are in the WDM regime. In addition, we analyze the thermal changes in the $d$-band excitations and outline the possibility to use future XRTS measurements of isochorically heated copper as a controlled testbed for WDM theories.
△ Less
Submitted 8 May, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
Ultrahigh Resolution X-ray Thomson Scattering Measurements at the European XFEL
Authors:
Thomas Gawne,
Zhandos A. Moldabekov,
Oliver S. Humphries,
Karen Appel,
Carsten Bähtz,
Victorien Bouffetier,
Erik Brambrink,
Attila Cangi,
Sebastian Göde,
Zuzana Konôpková,
Mikako Makita,
Mikhail Mishchenko,
Motoaki Nakatsutsumi,
Kushal Ramakrishna,
Lisa Randolph,
Sebastian Schwalbe,
Jan Vorberger,
Lennart Wollenweber,
Ulf Zastrau,
Tobias Dornheim,
Thomas R. Preston
Abstract:
Using a novel ultrahigh resolution ($ΔE \sim 0.1\,$eV) setup to measure electronic features in x-ray Thomson scattering (XRTS) experiments at the European XFEL in Germany, we have studied the collective plasmon excitation in aluminium at ambient conditions, which we can measure very accurately even at low momentum transfers. As a result, we can resolve previously reported discrepancies between ab…
▽ More
Using a novel ultrahigh resolution ($ΔE \sim 0.1\,$eV) setup to measure electronic features in x-ray Thomson scattering (XRTS) experiments at the European XFEL in Germany, we have studied the collective plasmon excitation in aluminium at ambient conditions, which we can measure very accurately even at low momentum transfers. As a result, we can resolve previously reported discrepancies between ab initio time-dependent density functional theory simulations and experimental observations. The demonstrated capability for high-resolution XRTS measurements will be a game changer for the diagnosis of experiments with matter under extreme densities, temperatures, and pressures, and unlock the full potential of state-of-the-art x-ray free electron laser (XFEL) facilities to study planetary interior conditions, to understand inertial confinement fusion applications, and for material science and discovery.
△ Less
Submitted 16 May, 2024; v1 submitted 5 March, 2024;
originally announced March 2024.
-
Excitation signatures of isochorically heated electrons in solids at finite wavenumber explored from first principles
Authors:
Zhandos A. Moldabekov,
Thomas D. Gawne,
Sebastian Schwalbe,
Thomas R. Preston,
Jan Vorberger,
Tobias Dornheim
Abstract:
Ultrafast heating of solids with modern X-ray free electron lasers (XFELs) leads to a unique set of conditions that is characterized by the simultaneous presence of heated electrons in a cold ionic lattice. In this work, we analyze the effect of electronic heating on the dynamic structure factor (DSF) in bulk Aluminium (Al) with a face-centered cubic lattice and in silicon (Si) with a crystal diam…
▽ More
Ultrafast heating of solids with modern X-ray free electron lasers (XFELs) leads to a unique set of conditions that is characterized by the simultaneous presence of heated electrons in a cold ionic lattice. In this work, we analyze the effect of electronic heating on the dynamic structure factor (DSF) in bulk Aluminium (Al) with a face-centered cubic lattice and in silicon (Si) with a crystal diamond structure using first-principles linear-response time-dependent density functional theory simulations. We find a thermally induced red shift of the collective plasmon excitation in both materials. In addition, we show that the heating of the electrons in Al can lead to the formation of a double-plasmon peak due to the extension of the Landau damping region to smaller wavenumbers. Finally, we demonstrate that thermal effects generate a measurable and distinct signature (peak-valley structure) in the DSF of Si at small frequencies. Our simulations indicate that there is a variety of new features in the spectrum of X-ray-driven solids, specifically at finite momentum transfer, which can probed in upcoming X-ray Thomson scattering (XRTS) experiments at various XFEL facilities.
△ Less
Submitted 26 April, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser
Authors:
Alejandro Laso Garcia,
Long Yang,
Victorien Bouffetier,
Karen Apple,
Carsten Baehtz,
Johannes Hagemann,
Hauke Höppner,
Oliver Humphries,
Mikhail Mishchenko,
Motoaki Nakatsutsumi,
Alexander Pelka,
Thomas R. Preston,
Lisa Randolph,
Ulf Zastrau,
Thomas E. Cowan,
Lingen Huang,
Toma Toncian
Abstract:
Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition ra…
▽ More
Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Resonant inelastic x-ray scattering in warm-dense Fe compounds beyond the SASE FEL resolution limit
Authors:
Alessandro Forte,
Thomas Gawne,
Karim K. Alaa El-Din,
Oliver S. Humphries,
Thomas R. Preston,
Céline Crépisson,
Thomas Campbell,
Pontus Svensson,
Sam Azadi,
Patrick Heighway,
Yuanfeng Shi,
David A. Chin,
Ethan Smith,
Carsten Baehtz,
Victorien Bouffetier,
Hauke Höppner,
David McGonegle,
Marion Harmand,
Gilbert W. Collins,
Justin S. Wark,
Danae N. Polsin,
Sam M. Vinko
Abstract:
Resonant inelastic x-ray scattering (RIXS) is a widely used spectroscopic technique, providing access to the electronic structure and dynamics of atoms, molecules, and solids. However, RIXS requires a narrow bandwidth x-ray probe to achieve high spectral resolution. The challenges in delivering an energetic monochromated beam from an x-ray free electron laser (XFEL) thus limit its use in few-shot…
▽ More
Resonant inelastic x-ray scattering (RIXS) is a widely used spectroscopic technique, providing access to the electronic structure and dynamics of atoms, molecules, and solids. However, RIXS requires a narrow bandwidth x-ray probe to achieve high spectral resolution. The challenges in delivering an energetic monochromated beam from an x-ray free electron laser (XFEL) thus limit its use in few-shot experiments, including for the study of high energy density systems. Here we demonstrate that by correlating the measurements of the self-amplified spontaneous emission (SASE) spectrum of an XFEL with the RIXS signal, using a dynamic kernel deconvolution with a neural surrogate, we can achieve electronic structure resolutions substantially higher than those normally afforded by the bandwidth of the incoming x-ray beam. We further show how this technique allows us to discriminate between the valence structures of Fe and Fe$_2$O$_3$, and provides access to temperature measurements as well as M-shell binding energies estimates in warm-dense Fe compounds.
△ Less
Submitted 11 January, 2024;
originally announced February 2024.
-
Dielectronic satellite emission from a solid-density Mg plasma: relationship to models of ionisation potential depression
Authors:
G. Pérez-Callejo,
T. Gawne,
T. R. Preston,
P. Hollebon,
O. S. Humphries,
H. -K. Chung,
G. L. Dakovski,
J. Krzywinski,
M. P. Minitti,
T. Burian,
J. Chalupský,
V. Hájková,
L. Juha,
V. Vozda,
U. Zastrau,
S. M. Vinko,
S. J. Rose,
J. S. Wark
Abstract:
We report on experiments where solid-density Mg plasmas are created by heating with the focused output of the Linac Coherent Light Source x-ray free-electron-laser. We study the K-shell emission from the Helium and Lithium-like ions using Bragg crystal spectroscopy. Observation of the dielectronic satellites in Lithium-like ions confirms that the M-shell electrons appear bound for these high charg…
▽ More
We report on experiments where solid-density Mg plasmas are created by heating with the focused output of the Linac Coherent Light Source x-ray free-electron-laser. We study the K-shell emission from the Helium and Lithium-like ions using Bragg crystal spectroscopy. Observation of the dielectronic satellites in Lithium-like ions confirms that the M-shell electrons appear bound for these high charge states. An analysis of the intensity of these satellites indicates that when modelled with an atomic-kinetics code, the ionisation potential depression model employed needs to produce depressions for these ions which lie between those predicted by the well known Stewart-Pyatt and Ecker-Kroll models. These results are largely consistent with recent Density Functional Theory calculations.
△ Less
Submitted 4 March, 2024; v1 submitted 5 October, 2023;
originally announced October 2023.
-
Evidence of free-bound transitions in warm dense matter and their impact on equation-of-state measurements
Authors:
Maximilian P. Böhme,
Luke B. Fletcher,
Tilo Döppner,
Dominik Kraus,
Andrew D. Baczewski,
Thomas R. Preston,
Michael J. MacDonald,
Frank R. Graziani,
Zhandos A. Moldabekov,
Jan Vorberger,
Tobias Dornheim
Abstract:
Warm dense matter (WDM) is now routinely created and probed in laboratories around the world, providing unprecedented insights into conditions achieved in stellar atmospheres, planetary interiors, and inertial confinement fusion experiments. However, the interpretation of these experiments is often filtered through models with systematic errors that are difficult to quantify. Due to the simultaneo…
▽ More
Warm dense matter (WDM) is now routinely created and probed in laboratories around the world, providing unprecedented insights into conditions achieved in stellar atmospheres, planetary interiors, and inertial confinement fusion experiments. However, the interpretation of these experiments is often filtered through models with systematic errors that are difficult to quantify. Due to the simultaneous presence of quantum degeneracy and thermal excitation, processes in which free electrons are de-excited into thermally unoccupied bound states transferring momentum and energy to a scattered x-ray photon become viable. Here we show that such free-bound transitions are a particular feature of WDM and vanish in the limits of cold and hot temperatures. The inclusion of these processes into the analysis of recent X-ray Thomson Scattering experiments on WDM at the National Ignition Facility and the Linac Coherent Light Source significantly improves model fits, indicating that free-bound transitions have been observed without previously being identified. This interpretation is corroborated by agreement with a recently developed model-free thermometry technique and presents an important step for precisely characterizing and understanding the complex WDM state of matter.
△ Less
Submitted 30 June, 2023;
originally announced June 2023.
-
X-ray Thomson scattering absolute intensity from the f-sum rule in the imaginary-time domain
Authors:
Tobias Dornheim,
Tilo Döppner,
Andrew D. Baczewski,
Panagiotis Tolias,
Maximilian P. Böhme,
Zhandos A. Moldabekov,
Thomas Gawne,
Divyanshu Ranjan,
David A. Chapman,
Michael J. MacDonald,
Thomas R. Preston,
Dominik Kraus,
Jan Vorberger
Abstract:
We present a formally exact and simulation-free approach for the normalization of X-ray Thomson scattering (XRTS) spectra based on the f-sum rule of the imaginary-time correlation function (ITCF). Our method works for any degree of collectivity, over a broad range of temperatures, and is applicable even in nonequilibrium situations. In addition to giving us model-free access to electronic correlat…
▽ More
We present a formally exact and simulation-free approach for the normalization of X-ray Thomson scattering (XRTS) spectra based on the f-sum rule of the imaginary-time correlation function (ITCF). Our method works for any degree of collectivity, over a broad range of temperatures, and is applicable even in nonequilibrium situations. In addition to giving us model-free access to electronic correlations, this new approach opens up the intriguing possibility to extract a plethora of physical properties from the ITCF based on XRTS experiments.
△ Less
Submitted 4 March, 2024; v1 submitted 24 May, 2023;
originally announced May 2023.
-
Revealing Non-equilibrium and Relaxation in Warm Dense Matter
Authors:
Jan Vorberger,
Thomas R. Preston,
Nikita Medvedev,
Maximilian P. Böhme,
Zhandos A. Moldabekov,
Dominik Kraus,
Tobias Dornheim
Abstract:
Experiments creating extreme states of matter almost invariably create non-equilibrium states. These are very interesting in their own right but need to be understood even if the ultimate goal is to probe high-pressure or high-temperature equilibrium properties like the equation of state. Here, we report on the capabilities of the newly developed imaginary time correlation function (ITCF) techniqu…
▽ More
Experiments creating extreme states of matter almost invariably create non-equilibrium states. These are very interesting in their own right but need to be understood even if the ultimate goal is to probe high-pressure or high-temperature equilibrium properties like the equation of state. Here, we report on the capabilities of the newly developed imaginary time correlation function (ITCF) technique [1] to detect and quantify non-equilibrium in pump-probe experiments fielding time resolved x-ray scattering diagnostics. We find a high sensitivity of the ITCF even to a small fraction of non-equilibrium electrons in the Wigner distribution. The behavior of the ITCF technique is such that modern lasers and detectors should be able to trace the non-equilibrium relaxation from tens of femto-seconds to several 10s of picoseconds without the need for a model.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Investigating Mechanisms of State Localization in Highly-Ionized Dense Plasmas
Authors:
Thomas Gawne,
Thomas Campbell,
Alessandro Forte,
Patrick Hollebon,
Gabriel Perez-Callejo,
Oliver Humphries,
Oliver Karnbach,
Muhammad F. Kasim,
Thomas R. Preston,
Hae Ja Lee,
Alan Miscampbell,
Quincy Y. van den Berg,
Bob Nagler,
Shenyuan Ren,
Ryan B. Royle,
Justin S. Wark,
Sam M. Vinko
Abstract:
We present the first experimental observation of K$_β$ emission from highly charged Mg ions at solid density, driven by intense x-rays from a free electron laser. The presence of K$_β$ emission indicates the $n=3$ atomic shell is relocalized for high charge states, providing an upper constraint on the depression of the ionization potential. We explore the process of state relocalization in dense p…
▽ More
We present the first experimental observation of K$_β$ emission from highly charged Mg ions at solid density, driven by intense x-rays from a free electron laser. The presence of K$_β$ emission indicates the $n=3$ atomic shell is relocalized for high charge states, providing an upper constraint on the depression of the ionization potential. We explore the process of state relocalization in dense plasmas from first principles using finite-temperature density functional theory alongside a wavefunction localization metric, and find excellent agreement with experimental results.
△ Less
Submitted 14 August, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Temperature analysis of X-ray Thomson scattering data
Authors:
Tobias Dornheim,
Maximilian Böhme,
Dave Chapman,
Dominik Kraus,
Thomas R. Preston,
Zhandos Moldabekov,
Niclas Schlünzen,
Attila Cangi,
Tilo Döppner,
Jan Vorberger
Abstract:
The accurate interpretation of experiments with matter at extreme densities and pressures is a notoriously difficult challenge. In a recent work [T.~Dornheim et al., Nature Comm. (in print), arXiv:2206.12805], we have introduced a formally exact methodology that allows extracting the temperature of arbitrarily complex materials without any model assumptions or simulations. Here, we provide a more…
▽ More
The accurate interpretation of experiments with matter at extreme densities and pressures is a notoriously difficult challenge. In a recent work [T.~Dornheim et al., Nature Comm. (in print), arXiv:2206.12805], we have introduced a formally exact methodology that allows extracting the temperature of arbitrarily complex materials without any model assumptions or simulations. Here, we provide a more detailed introduction to this approach and analyze the impact of experimental noise on the extracted temperatures. In particular, we extensively apply our method both to synthetic scattering data and to previous experimental measurements over a broad range of temperatures and wave numbers. We expect that our approach will be of high interest to a gamut of applications, including inertial confinement fusion, laboratory astrophysics, and the compilation of highly accurate equation-of-state databases.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Electronic Density Response of Warm Dense Matter
Authors:
Tobias Dornheim,
Zhandos A. Moldabekov,
Kushal Ramakrishna,
Panagiotis Tolias,
Andrew D. Baczewski,
Dominik Kraus,
Thomas R. Preston,
David A. Chapman,
Maximilian P. Böhme,
Tilo Döppner,
Frank Graziani,
Michael Bonitz,
Attila Cangi,
Jan Vorberger
Abstract:
Matter at extreme temperatures and pressures -- commonly known as warm dense matter (WDM) in the literature -- is ubiquitous throughout our Universe and occurs in a number of astrophysical objects such as giant planet interiors and brown dwarfs. Moreover, WDM is very important for technological applications such as inertial confinement fusion, and is realized in the laboratory using different tech…
▽ More
Matter at extreme temperatures and pressures -- commonly known as warm dense matter (WDM) in the literature -- is ubiquitous throughout our Universe and occurs in a number of astrophysical objects such as giant planet interiors and brown dwarfs. Moreover, WDM is very important for technological applications such as inertial confinement fusion, and is realized in the laboratory using different techniques. A particularly important property for the understanding of WDM is given by its electronic density response to an external perturbation. Such response properties are routinely probed in x-ray Thomson scattering (XRTS) experiments, and, in addition, are central for the theoretical description of WDM. In this work, we give an overview of a number of recent developments in this field. To this end, we summarize the relevant theoretical background, covering the regime of linear-response theory as well as nonlinear effects, the fully dynamic response and its static, time-independent limit, and the connection between density response properties and imaginary-time correlation functions (ITCF). In addition, we introduce the most important numerical simulation techniques including ab initio path integral Monte Carlo (PIMC) simulations and different thermal density functional theory (DFT) approaches. From a practical perspective, we present a variety of simulation results for different density response properties, covering the archetypal model of the uniform electron gas and realistic WDM systems such as hydrogen. Moreover, we show how the concept of ITCFs can be used to infer the temperature from XRTS measurements of arbitrarily complex systems without the need for any models or approximations. Finally, we outline a strategy for future developments based on the close interplay between simulations and experiments.
△ Less
Submitted 19 December, 2022; v1 submitted 16 December, 2022;
originally announced December 2022.
-
Nanoscale subsurface dynamics of solids upon high-intensity laser irradiation observed by femtosecond grazing-incidence x-ray scattering
Authors:
Lisa Randolph,
Mohammadreza Banjafar,
Thomas R. Preston,
Toshinori Yabuuchi,
Mikako Makita,
Nicholas P. Dover,
Christian Rödel,
Sebastian Göde,
Yuichi Inubushi,
Gerhard Jakob,
Johannes Kaa,
Akira Kon,
James K. Koga,
Dmitriy Ksenzov,
Takeshi Matsuoka,
Mamiko Nishiuchi,
Michael Paulus,
Frederic Schon,
Keiichi Sueda,
Yasuhiko Sentoku,
Tadashi Togashi,
Mehran Vafaee-Khanjani,
Michael Bussmann,
Thomas E. Cowan,
Mathias Kläui
, et al. (6 additional authors not shown)
Abstract:
Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidi…
▽ More
Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidification occur at picosecond and nanosecond time scales. Imaging methods, e.g. using x-ray free-electron lasers (XFEL), were hitherto unable to measure the depth-resolved subsurface dynamics of laser-solid interactions with appropriate temporal and spatial resolution. Here we demonstrate picosecond grazing-incidence small-angle x-ray scattering (GISAXS) from laser-produced plasmas using XFEL pulses. Using multi-layer (ML) samples, both the surface ablation and subsurface density dynamics are measured with nanometer depth resolution. Our experimental data challenges the state-of-the-art modeling of matter under extreme conditions and opens new perspectives for laser material processing and high-energy-density science.
△ Less
Submitted 8 October, 2021; v1 submitted 30 December, 2020;
originally announced December 2020.
-
Time-resolved XUV Opacity Measurements of Warm-Dense Aluminium
Authors:
S. M. Vinko,
V. Vozda,
J. Andreasson,
S. Bajt,
J. Bielecki,
T. Burian,
J. Chalupsky,
O. Ciricosta,
M. P. Desjarlais,
H. Fleckenstein,
J. Hajdu,
V. Hajkova,
P. Hollebon,
L. Juha,
M. F. Kasim,
E. E. McBride,
K. Muehlig,
T. R. Preston,
D. S. Rackstraw,
S. Roling,
S. Toleikis,
J. S. Wark,
H. Zacharias
Abstract:
The free-free opacity in plasmas is fundamental to our understanding of energy transport in stellar interiors and for inertial confinement fusion research. However, theoretical predictions in the challenging dense plasma regime are conflicting and there is a dearth of accurate experimental data to allow for direct model validation. Here we present time-resolved transmission measurements in solid-d…
▽ More
The free-free opacity in plasmas is fundamental to our understanding of energy transport in stellar interiors and for inertial confinement fusion research. However, theoretical predictions in the challenging dense plasma regime are conflicting and there is a dearth of accurate experimental data to allow for direct model validation. Here we present time-resolved transmission measurements in solid-density Al heated by an XUV free-electron laser. We use a novel functional optimization approach to extract the temperature-dependent absorption coefficient directly from an oversampled pool of single-shot measurements, and find a pronounced enhancement of the opacity as the plasma is heated to temperatures of order the Fermi energy. Plasma heating and opacity-enhancement is observed on ultrafast time scales, within the duration of the femtosecond XUV pulse. We attribute further rises in the opacity on ps timescales to melt and the formation of warm-dense matter.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.