-
Optimizing Josephson Junction Reproducibility in 30 kV E-beam Lithography: Analysis of Backscattered Electron Distribution
Authors:
A. M. Rebello,
L. M. Ruela,
G. Moreto,
N. Y. Klein,
E. Martins,
I. S. Oliveira,
F. Rouxinol,
J. P. Sinnecker
Abstract:
This paper explores methods to enhance the reproducibility of Josephson junctions, crucial elements in superconducting quantum technologies, when employing the Dolan technique in 30 kV e-beam processes. The study explores the influence of dose distribution along the bridge area on reproducibility, addressing challenges related to fabrication sensitivity. Experimental methods include E-beam lithogr…
▽ More
This paper explores methods to enhance the reproducibility of Josephson junctions, crucial elements in superconducting quantum technologies, when employing the Dolan technique in 30 kV e-beam processes. The study explores the influence of dose distribution along the bridge area on reproducibility, addressing challenges related to fabrication sensitivity. Experimental methods include E-beam lithography, with electron trajectory simulations shedding light on backscattered electron behavior. We demonstrate the fabrication of different junction geometries, revealing that some geometries significantly improve reproducibility by resulting in a more homogeneous dose distribution over the junction area.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
Higher-dimensional Euclidean and non-Euclidean structures in planar circuit quantum electrodynamics
Authors:
Alberto Saa,
Eduardo Miranda,
Francisco Rouxinol
Abstract:
We show that a recent proposal for simulating planar hyperbolic lattices with circuit quantum electrodynamics can be extended to accommodate also higher dimensional lattices in Euclidean and non-Euclidean spaces if one allows for circuits with more than three polygons at each vertex. The quantum dynamics of these circuits, which can be constructed with present-day technology, are governed by effec…
▽ More
We show that a recent proposal for simulating planar hyperbolic lattices with circuit quantum electrodynamics can be extended to accommodate also higher dimensional lattices in Euclidean and non-Euclidean spaces if one allows for circuits with more than three polygons at each vertex. The quantum dynamics of these circuits, which can be constructed with present-day technology, are governed by effective tight-binding Hamiltonians corresponding to higher-dimensional Kagomé-like structures ($n$-dimensional zeolites), which are well known to exhibit strong frustration and flat bands. We analyze the relevant spectra of these systems and derive an exact expression for the fraction of flat-band states. Our results expand considerably the range of non-Euclidean geometry realizations with circuit quantum electrodynamics.
△ Less
Submitted 19 August, 2021;
originally announced August 2021.
-
Mode Structure in Superconducting Metamaterial Transmission Line Resonators
Authors:
H. Wang,
A. P. Zhuravel,
S. Indrajeet,
Bruno G. Taketani,
M. D. Hutchings,
Y. Hao,
F. Rouxinol,
F. K. Wilhelm,
M. LaHaye,
A. V. Ustinov,
B. L. T. Plourde
Abstract:
Superconducting metamaterials are a promising resource for quantum information science. In the context of circuit QED, they provide a means to engineer on-chip, novel dispersion relations and a band structure that could ultimately be utilized for generating complex entangled states of quantum circuitry, for quantum reservoir engineering, and as an element for quantum simulation architectures. Here…
▽ More
Superconducting metamaterials are a promising resource for quantum information science. In the context of circuit QED, they provide a means to engineer on-chip, novel dispersion relations and a band structure that could ultimately be utilized for generating complex entangled states of quantum circuitry, for quantum reservoir engineering, and as an element for quantum simulation architectures. Here we report on the development and measurement at millikelvin temperatures of a particular type of circuit metamaterial resonator composed of planar superconducting lumped-element reactances in the form of a discrete left-handed transmission line (LHTL). We discuss the details of the design, fabrication, and circuit properties of this system. As well, we provide an extensive characterization of the dense mode spectrum in these metamaterial resonators, which we conducted using both microwave transmission measurements and laser scanning microscopy (LSM). Results are observed to be in good quantitative agreement with numerical simulations and also an analytical model based upon current-voltage relationships for a discrete transmission line. In particular, we demonstrate that the metamaterial mode frequencies, spatial profiles of current and charge densities, and damping due to external loading can be readily modeled and understood, making this system a promising tool for future use in quantum circuit applications and for studies of complex quantum systems.
△ Less
Submitted 31 May, 2019; v1 submitted 6 December, 2018;
originally announced December 2018.
-
Measurements of nanoresonator-qubit interactions in a hybrid quantum electromechanical system
Authors:
F. Rouxinol,
Y. Hao,
F. Brito,
A. O. Caldeira,
E. K. Irish,
M. D. LaHaye
Abstract:
Experiments to probe the basic quantum properties of motional degrees of freedom of mechanical systems have developed rapidly over the last decade. One promising approach is to use hybrid electromechanical systems incorporating superconducting qubits and microwave circuitry. However, a critical challenge facing the development of these systems is to achieve strong coupling between mechanics and qu…
▽ More
Experiments to probe the basic quantum properties of motional degrees of freedom of mechanical systems have developed rapidly over the last decade. One promising approach is to use hybrid electromechanical systems incorporating superconducting qubits and microwave circuitry. However, a critical challenge facing the development of these systems is to achieve strong coupling between mechanics and qubits while simultaneously reducing coupling of both the qubit and mechanical mode to the environment. Here we report measurements of a qubit-coupled mechanical resonator system consisting of an ultra-high-frequency nanoresonator and a long coherence-time superconducting transmon qubit, embedded in superconducting coplanar waveguide cavity. It is demonstrated that the nanoresonator and transmon have commensurate energies and transmon coherence times are one order of magnitude larger than for all previously reported qubit-coupled nanoresonators. Moreover, we show that numerical simulations of this new hybrid quantum system are in good agreement with spectroscopic measurements and suggest that the nanoresonator in our device resides at low thermal occupation number, near its ground state, acting as a dissipative bath seen by the qubit. We also outline how this system could soon be developed as a platform for implementing more advanced experiments with direct relevance to quantum information processing and quantum thermodynamics, including the study of nanoresonator quantum noise properties, reservoir engineering, and nanomechanical quantum state generation and detection.
△ Less
Submitted 4 May, 2016;
originally announced May 2016.
-
Superconducting metamaterials and qubits
Authors:
B. L. T. Plourde,
Haozhi Wang,
Francisco Rouxinol,
M. D. LaHaye
Abstract:
Superconducting thin-film metamaterial resonators can provide a dense microwave mode spectrum with potential applications in quantum information science. We report on the fabrication and low-temperature measurement of metamaterial transmission-line resonators patterned from Al thin films. We also describe multiple approaches for numerical simulations of the microwave properties of these structures…
▽ More
Superconducting thin-film metamaterial resonators can provide a dense microwave mode spectrum with potential applications in quantum information science. We report on the fabrication and low-temperature measurement of metamaterial transmission-line resonators patterned from Al thin films. We also describe multiple approaches for numerical simulations of the microwave properties of these structures, along with comparisons with the measured transmission spectra. The ability to predict the mode spectrum based on the chip layout provides a path towards future designs integrating metamaterial resonators with superconducting qubits.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Superconducting Circuitry for Quantum Electromechanical Systems
Authors:
Matthew D. LaHaye,
Francisco Rouxinol,
Yu Hao,
Seung-Bo Shim,
Elinor K. Irish
Abstract:
Superconducting systems have a long history of use in experiments that push the frontiers of mechanical sensing. This includes both applied and fundamental research, which at present day ranges from quantum computing research and efforts to explore Planck-scale physics to fundamental studies on the nature of motion and the quantum limits on our ability to measure it. In this paper, we first provid…
▽ More
Superconducting systems have a long history of use in experiments that push the frontiers of mechanical sensing. This includes both applied and fundamental research, which at present day ranges from quantum computing research and efforts to explore Planck-scale physics to fundamental studies on the nature of motion and the quantum limits on our ability to measure it. In this paper, we first provide a short history of the role of superconducting circuitry and devices in mechanical sensing, focusing primarily on efforts in the last decade to push the study of quantum mechanics to include motion on the scale of human-made structures. This background sets the stage for the remainder of the paper, which focuses on the development of quantum electromechanical systems (QEMS) that incorporate superconducting quantum bits (qubits), superconducting transmission line resonators and flexural nanomechanical elements. In addition to providing the motivation and relevant background on the physical behavior of these systems, we discuss our recent efforts to develop a particular type of QEMS that is based upon the Cooper-pair box (CPB) and superconducting coplanar waveguide (CPW) cavities, a system which has the potential to serve as a testbed for studying the quantum properties of motion in engineered systems.
△ Less
Submitted 11 April, 2015;
originally announced April 2015.
-
Development of a broadband reflective T-filter for voltage biasing high-Q superconducting microwave cavities
Authors:
Yu Hao,
Francisco Rouxinol,
M. D. LaHaye
Abstract:
We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission measurements of the filter are seen to be in good agreement with simulations and demonstrate insertion losses greater than $20\,{\rm dB}$ in the range of…
▽ More
We present the design of a reflective stop-band filter based on quasi-lumped elements that can be utilized to introduce large dc and low-frequency voltage biases into a low-loss superconducting coplanar waveguide (CPW) cavity. Transmission measurements of the filter are seen to be in good agreement with simulations and demonstrate insertion losses greater than $20\,{\rm dB}$ in the range of ${\rm 3\,to\,10\,GHz}$. Moreover, transmission measurements of the CPW's fundamental mode demonstrate that loaded quality factors exceeding $10^5$ can be achieved with this design for dc voltages as large as ${\rm 20\,V}$ and for the cavity operated in the single-photon regime. This makes the design suitable for use in a number of applications including qubit-coupled mechanical systems and circuit QED.
△ Less
Submitted 26 September, 2014;
originally announced September 2014.
-
Testing Time Reversal Symmetry in Artificial Atoms
Authors:
Frederico Brito,
Francisco Rouxinol,
M. D. LaHaye,
Amir O. Caldeira
Abstract:
Over the past several decades, a rich series of experiments has repeatedly verified the quantum nature of superconducting devices, leading some of these systems to be regarded as artificial atoms. In addition to their application in quantum information processing, these `atoms' provide a test bed for studying quantum mechanics in macroscopic limits. Regarding the last point, we present here a feas…
▽ More
Over the past several decades, a rich series of experiments has repeatedly verified the quantum nature of superconducting devices, leading some of these systems to be regarded as artificial atoms. In addition to their application in quantum information processing, these `atoms' provide a test bed for studying quantum mechanics in macroscopic limits. Regarding the last point, we present here a feasible protocol for directly testing time reversal symmetry through the verification of the microreversibility principle in a superconducting artificial atom. Time reversal symmetry is a fundamental property of quantum mechanics and is expected to hold if the dynamics of the artificial atom strictly follow the Schrödinger equation. However, this property has yet to be tested in any macroscopic quantum system. In the end, as an application of this work, we outline how the successful implementation of the protocol would provide the first verification of the quantum work fluctuation theorems with superconducting systems.
△ Less
Submitted 30 June, 2015; v1 submitted 27 June, 2014;
originally announced June 2014.