-
Advanced Data Processing of THz-Time Domain Spectroscopy Data with Sinusoidally Moving Delay Lines
Authors:
Tim Vogel,
Clara Jody Saraceno
Abstract:
We provide a comprehensive technical analysis of the data acquisition process with oscillating delay lines for Terahertz-time domain spectroscopy. The utilization of these rapid stages, particularly in high-repetition-rate systems, is known to enable an effective reduction of noise content through averaging. However, caution must be exercised to optimize the data averaging process, with the goal o…
▽ More
We provide a comprehensive technical analysis of the data acquisition process with oscillating delay lines for Terahertz-time domain spectroscopy. The utilization of these rapid stages, particularly in high-repetition-rate systems, is known to enable an effective reduction of noise content through averaging. However, caution must be exercised to optimize the data averaging process, with the goal of significantly optimizing the dynamic range (DR) and signal-to-noise ratio (SNR). Here we discuss some pitfalls to avoid and the effect of improper data handling on the dynamic range obtainable. A free and open-source program, called parrot (Processing All Rapidly & Reliably Obtained THz-traces), is provided alongside this publication to overcome the discussed pitfalls and facilitate the acceleration of experimental setups and data analysis, thereby enhancing signal fidelity and reproducibility.
△ Less
Submitted 11 September, 2024; v1 submitted 25 July, 2024;
originally announced July 2024.
-
Single-cycle, 643-mW average power THz source based on tilted pulse front in lithium niobate
Authors:
Tim Vogel,
Samira Mansourzadeh,
Clara Jody Saraceno
Abstract:
We present, to the best of our knowledge, the highest average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the titled pulse-front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk Yb-amplifier. We study repetition rate dependent effects in our setup at 100 kHz and 40 kHz at this hi…
▽ More
We present, to the best of our knowledge, the highest average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the titled pulse-front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk Yb-amplifier. We study repetition rate dependent effects in our setup at 100 kHz and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and is thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times. The presented result is a first benchmark for high average power THz time domain spectroscopy systems for nonlinear spectroscopy, driven by very high average power ultrafast Yb lasers.
△ Less
Submitted 7 August, 2024; v1 submitted 5 June, 2024;
originally announced June 2024.
-
Microstructured large-area photoconductive terahertz emitters driven at high average power
Authors:
Mohsen Khalili,
Tim Vogel,
Yicheng Wang,
Samira Mansourzadeh,
Abhishek Singh,
Stephan Winnnerl,
Clara J. Saraceno
Abstract:
Emitters based on photoconductive materials excited by ultrafast lasers are well established and popular devices for THz generation. However, so far, these emitters, both photoconductive antennas and large area emitters, were mostly explored using driving lasers with moderate average powers (either fiber lasers with up to hundreds of milliwatts or Ti:Sapphire systems up to few watts). In this pape…
▽ More
Emitters based on photoconductive materials excited by ultrafast lasers are well established and popular devices for THz generation. However, so far, these emitters, both photoconductive antennas and large area emitters, were mostly explored using driving lasers with moderate average powers (either fiber lasers with up to hundreds of milliwatts or Ti:Sapphire systems up to few watts). In this paper, we explore the use of high power, MHz repetition rate Ytterbium (Yb) based oscillator for THz emission using a microstructured large area photoconductive emitter, consist of semi insulating GaAs with a 10 by 10 mm2 active area. As a driving source, we use a frequency doubled home built high average power ultrafast Yb oscillator, delivering 22 W of average power, 115 fs pulses with 91 MHz repetition rate at a central wavelength of 516 nm. When applying 9 W of average power (after an optical chopper with a duty cycle of 50 percent) on the structure without optimized heatsinking, we obtain 65 uW THz average power, 4 THz bandwidth; furthermore, we safely apply up to 18 W of power on the structure without observing damage. We investigate the impact of excitation power, bias voltage, optical fluence, and their interplay on the emitter performance and explore in detail the sources of thermal load originating from electrical and optical power. Optical power is found to have a more critical impact on LAE saturation than electrical power, thus optimized heatsinking will allow us to improve the conversion efficiency in the near future towards much higher emitter power. This work paves the way towards achieving hundreds of MHz or even GHz repetition rates, high power THz sources based on photoconductive emitters, that are of great interest for example for future THz imaging applications.
△ Less
Submitted 11 May, 2024; v1 submitted 21 February, 2024;
originally announced February 2024.
-
Tracing d-d transitions in FePS$_{3}$ on ultrafast time scales
Authors:
Jonah Elias Nitschke,
Michael Gutnikov,
Karl Schiller,
Eugenio Coronado,
Alan Omar,
Giovanni Zamborlini,
Clara Saraceno,
Matija Stupar,
Alberto M. Ruiz,
Dorye L. Esteras,
José J. Baldoví,
Frithjof Anders,
Mirko Cinchetti
Abstract:
Excitations between localized 3d states of transition metal ions within crystalline solids, commonly known as d-d transitions, play a pivotal role in diverse phenomena across solid state physics, materials science, and chemistry. These transitions contribute to the coloration in transition metal oxides, catalytic processes on oxide surfaces, and high-temperature superconductivity. They also couple…
▽ More
Excitations between localized 3d states of transition metal ions within crystalline solids, commonly known as d-d transitions, play a pivotal role in diverse phenomena across solid state physics, materials science, and chemistry. These transitions contribute to the coloration in transition metal oxides, catalytic processes on oxide surfaces, and high-temperature superconductivity. They also couple optical excitation to quantized collective phenomena such as phonons and magnons in magnetic systems. Until now, an experimental method to unravel the complex quasiparticle dynamics associated with d-d transitions has remained elusive. We bridge this gap by demonstrating that d-d transitions can be distinctly traced in momentum space and time using time- and angle-resolved photoelectron spectroscopy (trARPES). Through this approach, we can assign specific momentum-dependent characteristics and elucidate the decay mechanisms of specific d-d transitions in FePS$_{3}$, a two-dimensional van der Waals antiferromagnet with a rich array of quantum phenomena stemming from d-d transitions. This study pioneers the use of ARPES in probing the dynamics of d-d transitions across a wide spectrum of solid-state systems.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
Hybrid air-bulk multi-pass cell compressor for high pulse energies with full spatio-temporal characterization
Authors:
Alan Omar,
Martin Hoffmann,
Geoffrey Galle,
FranÇOis Sylla,
Clara J. Saraceno
Abstract:
Multi-pass cell (MPC) compressors have proven to be the method of choice for compression of high average power long-pulse Yb lasers. Yet, generating sub-30 fs pulses at high pulse energy with compact and simple components remains a challenge. This work demonstrates an efficient and cost-effective approach for nonlinear pulse compression at high pulse energy using a hybrid air-bulk MPC. By carefull…
▽ More
Multi-pass cell (MPC) compressors have proven to be the method of choice for compression of high average power long-pulse Yb lasers. Yet, generating sub-30 fs pulses at high pulse energy with compact and simple components remains a challenge. This work demonstrates an efficient and cost-effective approach for nonlinear pulse compression at high pulse energy using a hybrid air-bulk MPC. By carefully balancing the relative nonlinear contributions of ambient air and fused silica, we achieve strong spectral broadening without dispersion engineering or pressure-control inside the cell at 400 uJ pulse energy. In this way, we compress pulses from 220 fs to 27 fs at 40.3 W of average power (100 kHz repetition rate), enhancing the peak power from 1.6 GW to 10.2 GW while maintaining 78% of the energy within the main pulse. Our approach combines the strengths of gas-filled and bulk compression schemes and exhibits excellent overall optical transmission (91%) and spectral uniformity. Moreover, we utilize the INSIGHT technique to investigate spatio-temporal couplings and geometrical aberrations of the compressed pulse. Our results demonstrate remarkable temporal homogeneity, with an average Strehl ratio of 0.97 consistently observed throughout the entire spectral profile. Additionally, all spectrally-integrated Zernike coefficients for geometrical aberrations maintain values below 0.02λ.
△ Less
Submitted 9 February, 2024; v1 submitted 30 November, 2023;
originally announced November 2023.
-
Diode-pumped 88-fs SESAM mode-locked Tm,Ho:CLNGG laser at 2090 nm
Authors:
A. Suzuki,
Y. Wang,
S. Tomilov,
Z. Pan,
C. J. Saraceno
Abstract:
We report on a passively mode-locked Tm, Ho:CLNGG laser operating at 2090 nm, pumped by a multimode fiber-coupled 793 nm laser diode, representing the first demonstration of an affordable diode-pumped sub-100-fs mode-locked laser in the 2.1-\mum wavelength range. Due to the disordered nature of the gain material that exhibits a broad and smooth gain profile, pulses as short as 88 fs were achieved…
▽ More
We report on a passively mode-locked Tm, Ho:CLNGG laser operating at 2090 nm, pumped by a multimode fiber-coupled 793 nm laser diode, representing the first demonstration of an affordable diode-pumped sub-100-fs mode-locked laser in the 2.1-\mum wavelength range. Due to the disordered nature of the gain material that exhibits a broad and smooth gain profile, pulses as short as 88 fs were achieved with an average output power of 120 mW at a repetition rate of 70.3 MHz. The stable self-starting mode-locked operation was obtained using a semiconductor saturable absorber mirror based on GaSb material system.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
GHz repetition rate, sub-100-fs Ho:CALGO laser at 2.1 um with watt-level average power
Authors:
Weichao Yao,
Mohsen Khalili,
Yicheng Wang,
Martin Hoffmann,
Marcel van Delden,
Thomas Musch,
Clara J. Saraceno
Abstract:
We report on a GHz fundamental repetition rate Kerr-lens mode-locked Ho:CALGO laser emitting at 2.1 um. The laser employs a ring-cavity to increase the fundamental repetition rate to 1.179 GHz and can be made to oscillate in both directions stably with nearly identical performance: for counterclockwise oscillation, it generates 93-fs pulses at 1.68 W of average power, whereas 92 fs and 1.69 W were…
▽ More
We report on a GHz fundamental repetition rate Kerr-lens mode-locked Ho:CALGO laser emitting at 2.1 um. The laser employs a ring-cavity to increase the fundamental repetition rate to 1.179 GHz and can be made to oscillate in both directions stably with nearly identical performance: for counterclockwise oscillation, it generates 93-fs pulses at 1.68 W of average power, whereas 92 fs and 1.69 W were measured for clockwise operation. Our current results represent the highest average power from a 2-um GHz oscillator and the first sub-100-fs pulse duration from a Ho-based oscillator.
△ Less
Submitted 21 October, 2023;
originally announced October 2023.
-
High-power intracavity single-cycle THz pulse generation using thin lithium niobate
Authors:
Yicheng Wang,
Tim Vogel,
Mohsen Khalili,
Samira Mansourzadeh,
Kore Hasse,
Sergiy Suntsov,
Detlef Kip,
Clara J. Saraceno
Abstract:
Ultrafast laser driven, single-cycle THz pulsed sources hold immense potential for scientific and industrial applications; however, their limited average power hinders their widespread application. In particular, applications where high repetition rates in the multi-MHz region and beyond are required are more severely affected, due to the lower pulse energies available for frequency conversion. In…
▽ More
Ultrafast laser driven, single-cycle THz pulsed sources hold immense potential for scientific and industrial applications; however, their limited average power hinders their widespread application. In particular, applications where high repetition rates in the multi-MHz region and beyond are required are more severely affected, due to the lower pulse energies available for frequency conversion. In this respect, resonant enhancement both in passive and active resonators is a well-known technique for boosting the efficiency of nonlinear frequency conversion; however, this route has remained poorly explored for the generation of broadband THz pulses due to the inadequacy of typically employed nonlinear crystals. Here, we demonstrate that thin lithium niobate crystals used intracavity of multimode diode-pumped mode-locked thin-disk lasers are a promising platform to circumvent these difficulties. Using a 50-μm thin lithium niobate plate intracavity of a compact high-power mode-locked thin-disk laser, we generate milliwatt-level broadband THz pulses with a spectrum extending up to 3 THz at 44.8 MHz repetition rate, driven by 264 W of intracavity average power. This approach opens the door to efficient high-power single-cycle THz generation using affordable nonlinear crystals at very high repetition rates, scalable to kilowatt-level driving power with low cost and complexity.
△ Less
Submitted 30 October, 2023; v1 submitted 8 September, 2023;
originally announced September 2023.
-
High-power sub-picosecond filamentation at 1.03 μm with high repetition rates between 10 and 100 kHz
Authors:
Robin Löscher,
Victor Moreno,
Dionysis Adamou,
Denizhan K. Kesim,
Malte C. Schroeder,
Matteo Clerici,
Jean-Pierre Wolf,
Clara J. Saraceno
Abstract:
Filamentation has extensively been explored and is well understood at repetition rates <1 kHz due to the typical availability of multi-mJ laser systems at a moderate average power. The advent of high-power Yb-lasers opened new possibilities for filamentation research. However, so far, high average power Yb systems have mostly been explored to increase the driving pulse energy to several hundreds o…
▽ More
Filamentation has extensively been explored and is well understood at repetition rates <1 kHz due to the typical availability of multi-mJ laser systems at a moderate average power. The advent of high-power Yb-lasers opened new possibilities for filamentation research. However, so far, high average power Yb systems have mostly been explored to increase the driving pulse energy to several hundreds of mJ and not at significantly higher repetition rates. In this paper, we study, for the first time, long filaments at unprecedented high repetition rates of 10, 40, and 100 kHz using a 500-W Yb-doped thin-disk amplifier driver operating with sub-700 fs pulses. We compare the filament length, density hole, and fluorescence at a constant peak power but different repetition rates and find a strong dependence on filament length and density depletion with repetition rate. Our analysis reveals the emergence of a significant stationary density depletion at repetition rates of 40 and 100 kHz. The corresponding reduction in the breakdown threshold by increasing the laser repetition rate observed in our study signifies a promising avenue for enhancing the efficiency and reliability of electric discharge triggering in various scenarios. Using capacitive plasma probe measurements, we address the limitations of fluorescence imaging-based measurements and demonstrate a systematic underestimation of filament length. This work contributes to a deeper understanding of the interplay between laser repetition rates, filamentation, and heat-driven density depletion effects from high-repetition-rate high-power laser systems and will contribute to guiding future research, making use of filaments at high repetition rates.
△ Less
Submitted 21 November, 2023; v1 submitted 7 September, 2023;
originally announced September 2023.
-
Towards Intense Ultra-Broadband High Repetition Rate Terahertz Sources Based on Organic Crystals [Invited]
Authors:
Samira Mansourzadeh,
Tim Vogel,
Alan Omar,
Tobias O. Buchmann,
Edmund J. R. Kelleher,
Peter U. Jepsen,
Clara J. Saraceno
Abstract:
Increasing the average power of broadband, few-cycle terahertz (THz) sources is currently a topic of intense investigation, fueled by recent immense progress in high average power femtosecond laser driving sources at 1030 nm. However, many crucial applications would benefit not only from an increase in average power, but also from ultra-broad bandwidth, while maintaining high dynamic range at thes…
▽ More
Increasing the average power of broadband, few-cycle terahertz (THz) sources is currently a topic of intense investigation, fueled by recent immense progress in high average power femtosecond laser driving sources at 1030 nm. However, many crucial applications would benefit not only from an increase in average power, but also from ultra-broad bandwidth, while maintaining high dynamic range at these frequencies. This calls for the challenging combination of high repetition rates and high average power simultaneously. Here, we discuss the recent progress in the promising approach enabled by organic crystals for THz-generation. Specifically, this review article discusses advances with the most commonly used organic crystals BNA, DAST, DSTMS, OH1 and HMQ-TMS. We place special emphasis on nonlinear and thermal properties and discuss future directions for this field.
△ Less
Submitted 27 October, 2023; v1 submitted 17 August, 2023;
originally announced August 2023.
-
Photoconductive receivers at 1030 nm for high average power pulsed THz detection
Authors:
Tim Vogel,
Samira Mansourzadeh,
Uttam Nandi,
Justin Norman,
Sascha Preu,
Clara J. Saraceno
Abstract:
In the last few years, many advances have been made in the demonstration of high-average power pulsed THz sources; however, little effort has been made to study compatible sensitive field-resolved detectors. Here, we investigate ErAs:InAlGaAs photoconductive receivers optimized for a probe wavelength of 1030 nm and thus suitable for the new class of high-power ultrafast Ytterbium-based laser sourc…
▽ More
In the last few years, many advances have been made in the demonstration of high-average power pulsed THz sources; however, little effort has been made to study compatible sensitive field-resolved detectors. Here, we investigate ErAs:InAlGaAs photoconductive receivers optimized for a probe wavelength of 1030 nm and thus suitable for the new class of high-power ultrafast Ytterbium-based laser sources for THz generation and detection. The performance of the receiver is tested with a few-cycle THz source with high average power up to 20 mW and the dynamic range and saturation behavior of the receiver is thoroughly characterized. Under optimized settings, a dynamic range of more than 115 dB is reached in a 120 s measurement time with 20 mW of THz average power, which is among the highest reported values to date. By reviewing the state-of-the art in TDS measurement and post-processing technology, we identify current limitations and guidelines for further increasing the dynamic range towards 150 dB in short measurement times using high average power THz systems.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Temperature-Dependent THz Properties and Emission of Organic Crystal BNA
Authors:
Samira Mansourzadeh,
Tim Vogel,
Mostafa Shalaby,
Clara J. Saraceno
Abstract:
As high-average power ultrafast lasers become increasingly available for nonlinear conversion, the temperature dependence of the material properties of nonlinear crystals becomes increasingly relevant. Here, we present temperature-dependent THz complex refractive index measurements of the organic crystal BNA over a wide range of temperatures from 300 K down to 80 K for THz frequencies up to 4 THz…
▽ More
As high-average power ultrafast lasers become increasingly available for nonlinear conversion, the temperature dependence of the material properties of nonlinear crystals becomes increasingly relevant. Here, we present temperature-dependent THz complex refractive index measurements of the organic crystal BNA over a wide range of temperatures from 300 K down to 80 K for THz frequencies up to 4 THz for the first time. Our measurements show that whereas the temperature-dependent refractive index has only minor deviation from room temperature values, the temperature-dependent absorption coefficient decreases at low temperature. We additionally compare these measurements with conversion efficiency and spectra observed during THz generation experiments in the same temperature range and using the same crystal, using an ultrafast Yb-laser for excitation. Surprisingly, the damage threshold of the material does not improve significantly upon cooling, pointing to a nonlinear absorption mechanism being responsible for damage. However, we observe a significant increase in THz yield at lower temperatures, which is most likely due to the reduced THz absorption. These findings will be useful for future designs of high average power pumped organic-crystal based THz-TDS systems.
△ Less
Submitted 28 August, 2023; v1 submitted 28 April, 2023;
originally announced April 2023.
-
Low-noise, 2-W average power, 112-fs Kerr-lens mode-locked Ho:CALGO laser at 2.1 um
Authors:
Weichao Yao,
Yicheng Wang,
Shahwar Ahmed,
Martin Hoffmann,
Marcel van Delden,
Thomas Musch,
Clara J. Saraceno
Abstract:
We report on an in-band pumped soft-aperture Kerr-lens mode-locked Ho:CALGO bulk laser at 2.1 um, generating 2 W of average power with 112 fs pulses at 91-MHz repetition rate. To the best of our knowledge, this is the highest average power from a 100-fs class mode-locked laser based on a Tm3+ or Ho3+ doped bulk material. We show that the laser has excellent noise properties with an integrated rela…
▽ More
We report on an in-band pumped soft-aperture Kerr-lens mode-locked Ho:CALGO bulk laser at 2.1 um, generating 2 W of average power with 112 fs pulses at 91-MHz repetition rate. To the best of our knowledge, this is the highest average power from a 100-fs class mode-locked laser based on a Tm3+ or Ho3+ doped bulk material. We show that the laser has excellent noise properties with an integrated relative intensity noise of 0.02% and a timing jitter of 950 fs (RMS phase noise 0.543 mrad) in the integration interval from 10 Hz to 10 MHz. The demonstrated combination of high average power, short pulses, and low-noise make this an outstanding laser source for spectroscopy and many other applications at 2.1 um.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Spectral broadening of 2 mJ femtosecond pulses in a compact air-filled convex-concave multi-pass cell
Authors:
Alan Omar,
Tim Vogel,
Martin Hoffmann,
Clara J. Saraceno
Abstract:
Multi-pass cell (MPC) based temporal pulse compressors have emerged in the last years as a powerful and versatile solution to the intrinsic issue of long pulses from Yb-based high-power ultrafast lasers. However, the spectral broadening of high-energy (typically more than 100 uJ) pulses has only been realized in complex setups, i.e., in large and costly, pressure-controlled vacuum chambers to avoi…
▽ More
Multi-pass cell (MPC) based temporal pulse compressors have emerged in the last years as a powerful and versatile solution to the intrinsic issue of long pulses from Yb-based high-power ultrafast lasers. However, the spectral broadening of high-energy (typically more than 100 uJ) pulses has only been realized in complex setups, i.e., in large and costly, pressure-controlled vacuum chambers to avoid strong focusing, ionization, and damage on the mirrors. Here, we present spectral broadening of 2 mJ pulses in a simple and compact (60 cm long) multi-pass cell operated in ambient air. Instead of the traditional Herriott cell with concave-concave (CC/CC) mirrors, we use a convex-concave (CX/CC) design, where the beam stays large at all times allowing both to minimize damage and operate in ambient air. We demonstrate spectral broadening of 2.1 mJ pulses at 100 kHz repetition rate (200 W of average power) from 2.1 nm (pulse duration of 670 fs) to a spectral bandwidth of 24.5 nm, supporting 133 fs pulses with 96% transmission efficiency. We show the compressibility of these pulses down to 134 fs, and verify that the spectral homogeneity of the beam is similar to previously reported CC/CC designs. To the best of our knowledge, this is the first report of a CX/CC MPC compressor, operated at high pulse energies in air. Because of its simplicity, small footprint and low cost, we believe this demonstration will have significant impact in the ultrafast laser community.
△ Less
Submitted 25 November, 2022;
originally announced November 2022.
-
400 kHz repetition rate THz-TDS with 24 mW of average power driven by a compact industrial Yb-laser
Authors:
Celia Millon,
Sarah Houver,
Clara J. Saraceno
Abstract:
We demonstrate a high average power terahertz time-domain (THZ-TDS) spectrometer based on optical rectification in the tilted-pulse front geometry in lithium niobate at room temperature, driven by a commercial, industrial femtosecond-laser operating with flexible repetition rate between 40 kHz - 400 kHz. The driving laser provides a pulse energy of 41 uJ for all repetition rates, at a pulse durati…
▽ More
We demonstrate a high average power terahertz time-domain (THZ-TDS) spectrometer based on optical rectification in the tilted-pulse front geometry in lithium niobate at room temperature, driven by a commercial, industrial femtosecond-laser operating with flexible repetition rate between 40 kHz - 400 kHz. The driving laser provides a pulse energy of 41 uJ for all repetition rates, at a pulse duration of 310 fs, allowing us to explore repetition rate dependent effects in our TDS. At the maximum repetition rate of 400 kHz, up to 16.5 W of average power are available to drive our THz source, resulting in a maximum of 24 mW of THz average power with a conversion efficiency of ~ 0.15 % and electric field strength of several tens of kV/cm. At the other available lower repetition rates, we show that the pulse strength and bandwidth of our TDS is unchanged, showing that the THz generation is not affected by thermal effects in this average power region of several tens of watts. The resulting combination of high electric field strength with flexible and high repetition rate is very attractive for spectroscopy, in particular since the system is driven by an industrial, compact laser without the need for external compressors or other specialized pulse manipulation.
△ Less
Submitted 31 October, 2023; v1 submitted 20 September, 2022;
originally announced September 2022.
-
Broadband THz-TDS with 5.6 mW average power at 540 kHz using organic crystal BNA
Authors:
Samira Mansourzadeh,
Tim Vogel,
Alan Omar,
Mostafa Shalaby,
Mirko Cinchetti,
Clara J. Saraceno
Abstract:
We demonstrate efficient optical rectification in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline), driven by a temporally compressed, commercially available industrial Yb-laser system operating at 540 kHz repetition rate. Our THz source reaches 5.6 mW of THz average power driven by 4.7 W, 45 fs pulses and the resulting THz-TDS combines a very broad bandwidth of 7.5 THz and a high dynami…
▽ More
We demonstrate efficient optical rectification in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline), driven by a temporally compressed, commercially available industrial Yb-laser system operating at 540 kHz repetition rate. Our THz source reaches 5.6 mW of THz average power driven by 4.7 W, 45 fs pulses and the resulting THz-TDS combines a very broad bandwidth of 7.5 THz and a high dynamic range of 75 dB (in a measurement time of 70 s). The conversion efficiency at maximum THz power is 0.12%. To the best of our knowledge, this is the highest THz power so far demonstrated with BNA, achieved at a high repetition rate, and enabling to demonstrate a unique combination of bandwidth and dynamic range for THz-spectroscopy applications.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
8.7-W average power, in-band pumped femtosecond Ho:CALGO laser at 2.1 um
Authors:
Weichao Yao,
Yicheng Wang,
Sergei Tomilov,
Martin Hoffmann,
Sharhwar Ahmed,
Christoph Liebald,
Daniel Rytz,
Mark Peltz,
Volker Wesemann,
Clara J. Saraceno
Abstract:
We report on an in-band pumped SESAM mode-locked Ho:CALGO bulk laser with a record-high average power of 8.7 W and an optical-to-optical efficiency of 38.2% at a central wavelength of 2.1 um. At this power level, the bulk laser generates pulses with a duration of 369 fs at 84.4-MHz repetition rate, corresponding to a pulse energy of 103 nJ and a peak power of 246 kW. To the best of our knowledge,…
▽ More
We report on an in-band pumped SESAM mode-locked Ho:CALGO bulk laser with a record-high average power of 8.7 W and an optical-to-optical efficiency of 38.2% at a central wavelength of 2.1 um. At this power level, the bulk laser generates pulses with a duration of 369 fs at 84.4-MHz repetition rate, corresponding to a pulse energy of 103 nJ and a peak power of 246 kW. To the best of our knowledge, this is the highest average power and pulse energy directly generated from a mode-locked bulk laser in the 2-3 um wavelength region. Our current results indicate that Ho:CALGO is a competitive candidate for average power scaling of 2 um femtosecond lasers.
△ Less
Submitted 23 July, 2022;
originally announced July 2022.
-
Temperature-independent non-linear terahertz transmission by liquid water
Authors:
Célia Millon,
Johannes Schmidt,
Sashary Ramos,
Eliane P. van Dam,
Adrian Buchmann,
Clara Saraceno,
Fabio Novelli
Abstract:
Liquid water is one of the most studied substances, yet many of its properties are difficult to rationalize. The uniqueness of water is rooted in the dynamic network of hydrogen-bonded molecules with relaxation time constants of about one picosecond. Terahertz fields oscillate on a picosecond timescale and are inherently suited to study water. Recent advances in non-linear terahertz spectroscopy h…
▽ More
Liquid water is one of the most studied substances, yet many of its properties are difficult to rationalize. The uniqueness of water is rooted in the dynamic network of hydrogen-bonded molecules with relaxation time constants of about one picosecond. Terahertz fields oscillate on a picosecond timescale and are inherently suited to study water. Recent advances in non-linear terahertz spectroscopy have revealed large signals from water, which have been interpreted with different, sometimes competing, theoretical models. Here we show that the non-linear transmission of liquid water at ~1 THz is equal at 21 °C and 4 °C, thus suggesting that the most appropriate microscopic models should depend weakly on temperature. Among the different mechanisms proposed to date, the resonant reorientation of hydrogen-bonded water molecules might be the most appropriate to describe all of the currently available experimental results.
△ Less
Submitted 5 November, 2022; v1 submitted 8 June, 2022;
originally announced June 2022.
-
50-W average power Ho:YAG SESAM-modelocked thin-disk oscillator at 2.1 um
Authors:
Sergei Tomilov,
Yicheng Wang,
Martin Hoffmann,
Jonas Heidrich,
Matthias Golling,
Ursula Keller,
Clara J. Saraceno
Abstract:
Ultrafast laser systems operating with high-average power in the wavelength range from 1.9 um to 3 um are of interest for a wide range of applications for example in spectroscopy, material processing and as drivers for secondary sources in the XUV spectral region. In this area, laser systems based on holmium-doped gain materials directly emitting at 2.1 um have made significant progress over the p…
▽ More
Ultrafast laser systems operating with high-average power in the wavelength range from 1.9 um to 3 um are of interest for a wide range of applications for example in spectroscopy, material processing and as drivers for secondary sources in the XUV spectral region. In this area, laser systems based on holmium-doped gain materials directly emitting at 2.1 um have made significant progress over the past years, however so far only very few results were demonstrated in power-scalable high-power laser geometries. In particular, the thin-disk geometry is promising for directly modelocked oscillators with high average power levels that are comparable to amplifier systems at MHz repetition rate. In this paper, we demonstrate Semiconductor Saturable Absorber Mirror (SESAM) modelocked Ho:YAG thin-disk lasers (TDLs) emitting at 2.1 um wavelength with record-holding performance levels. In our highest average power configuration, we reach 50 W of average power, with 1.13 ps pulses, 2.11 uJ of pulse energy and ~1.9 MW of peak power. To the best of our knowledge, this represents the highest average power, as well as the highest output pulse energy so far demonstrated from a modelocked laser in the 2 um wavelength region. This record performance level was enabled by the recent development of high-power GaSb-based SESAMs with low loss, adapted for high intracavity power and pulse energy. We also explore the limitations in terms of reaching shorter pulse durations at high power with this gain material in the disk geometry and using SESAM modelocking, and present first steps in this direction, with the demonstration of 30 W of output power, with 692 fs pulses in another laser configuration.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Average power scaling of THz spintronic emitters in reflection geometry
Authors:
Tim Vogel,
Alan Omar,
Samira Mansourzadeh,
Frank Wulf,
Natalia Martín Sabanés,
Melanie Müller,
Tom S. Seifert,
Alexander Weigel,
Gerhard Jakob,
Mathias Kläui,
Ioachim Pupeza,
Tobias Kampfrath,
Clara J. Saraceno
Abstract:
Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explo…
▽ More
Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W at 400 kHz repetition rate, temporally compressed to a pulse duration of 27 fs. We confirm that the reflection geometry with back-side cooling is ideally suited for these emitters in the high-average-power excitation regime. In order to understand limiting mechanisms, we disentangle the effects on THz power generation by average power and pulse energy, by varying the repetition rate of the laser. Our results show that the conversion efficiency remains mostly dependent on the incident fluence in this high-average-power, high-repetition-rate excitation regime if the emitters are efficiently cooled. Using these findings, we optimize the conversion efficiency to reach 5e-6 at highest excitation powers in the back-cooled reflection geometry. Our findings provide guidelines for scaling the power of THz radiation emitted by spintronic emitters to the mW-level by using state-of-the-art femtosecond sources with multi-hundred-Watt average power to reach ultra-broadband, strong-field THz sources with high repetition rate.
△ Less
Submitted 12 January, 2022; v1 submitted 17 December, 2021;
originally announced December 2021.
-
Moving towards high-power thin-disk lasers in the 2-μm wavelength range
Authors:
Sergei Tomilov,
Martin Hoffmann,
Yicheng Wang,
Clara J. Saraceno
Abstract:
Thin-disk lasers (TDLs) have made spectacular progress in the last decades both in continuous-wave and ultrafast operation. Nowadays, single thin-disk oscillators with > 16 kW of continuous-wave (CW)-power have been demonstrated and ultrafast amplifiers have largely surpassed the kilowatt milestone with pulse energies in the multi-100 mJ range. This amazing development has been demonstrated in the…
▽ More
Thin-disk lasers (TDLs) have made spectacular progress in the last decades both in continuous-wave and ultrafast operation. Nowadays, single thin-disk oscillators with > 16 kW of continuous-wave (CW)-power have been demonstrated and ultrafast amplifiers have largely surpassed the kilowatt milestone with pulse energies in the multi-100 mJ range. This amazing development has been demonstrated in the 1-μm wavelength range, using Yb-doped materials and supported by industrially available components. Motivated by both strong scientific and industrial applications, interest in expanding this performance to longer wavelength regions continues to increase. In particular, TDLs emitting directly in the short-wave mid-infrared (SW-MIR) region (2-3 μm) are especially sought after, and although many early studies have been reported, most remained in the proof-of-principle stage and the potential for multi-100-W operation remained undemonstrated. Here, we report on our recent results of a single fundamental-mode CW Ho:YAG thin-disk oscillator with >100 W of power, surpassing previous single-mode TDLs by a factor of >4, and marking a first milestone in the development of high-power SW-MIR TDLs. In optimized conditions, our laser system emitting at » 2.1 μm reaches an output power of 112 W with 54.6-% optical-to-optical efficiency and an M2 = 1.1. This system is ideally suited for future direct modelocking at the 100 W level, as well as for ultrafast amplification. We start the discussion with a review of the state-of-the-art of TDLs emitting directly in the vicinity of 2 μm, and then discuss difficulties and possible routes both towards ultrafast operation and next possible steps for power scaling.
△ Less
Submitted 25 November, 2021;
originally announced November 2021.
-
Milliwatt average power, MHz-repetition rate, broadband THz generation in organic crystal BNA with diamond substrate
Authors:
Samira Mansourzadeh,
Tim Vogel,
Mostafa Shalaby,
Frank Wulf,
Clara Jody Saraceno
Abstract:
We demonstrate a 13.3 MHz repetition rate, broadband THz source with milliwatt-average power, obtained by collinear optical rectification of a high-power Yb-doped thin-disk laser in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline). Our source reaches a maximum THz average power of 0.95 mW with an optical-to-THz efficiency of 4e-4 and a spectral bandwidth spanning up to 6 THz at -50 dB, d…
▽ More
We demonstrate a 13.3 MHz repetition rate, broadband THz source with milliwatt-average power, obtained by collinear optical rectification of a high-power Yb-doped thin-disk laser in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline). Our source reaches a maximum THz average power of 0.95 mW with an optical-to-THz efficiency of 4e-4 and a spectral bandwidth spanning up to 6 THz at -50 dB, driven by 2.4 W average power (after an optical chopper with duty cycle of 10%), 85 fs-pulses. This high average power excitation was possible without damaging the crystal by using a diamond-heatsinked crystal with significantly improved thermal properties. To the best of our knowledge, this result represents the highest THz average power reported so far using the commercially available organic crystal BNA, showing the potential of these crystals for high average power, high repetition rate femtosecond excitation. The combination of high power, high dynamic range, high repetition rate and broadband spectrum makes the demonstrated THz source highly attractive to improve various time-domain spectroscopy applications. Furthermore, we present a first exploration of the thermal behavior of BNA in this excitation regime, showing that thermal effects are the main limitation in average power scaling in these crystals.
△ Less
Submitted 26 June, 2021;
originally announced June 2021.
-
Single-cycle, MHz-repetition rate THz source with 66 mW of average power
Authors:
Frank Meyer,
Tim Vogel,
Shahwar Ahmed,
Clara J. Saraceno
Abstract:
We demonstrate THz generation using the tilted pulse front method in Lithium Niobate, driven at unprecedented high average power of more than 100 W and at 13.3 MHz repetition rate, provided by a compact amplifier-free modelocked thin-disk oscillator. The conversion efficiency was optimized with respect to pump spot size and pump pulse duration, enabling us to generate a maximum THz average power o…
▽ More
We demonstrate THz generation using the tilted pulse front method in Lithium Niobate, driven at unprecedented high average power of more than 100 W and at 13.3 MHz repetition rate, provided by a compact amplifier-free modelocked thin-disk oscillator. The conversion efficiency was optimized with respect to pump spot size and pump pulse duration, enabling us to generate a maximum THz average power of 66 mW, which is the highest reported to date from a laser-driven, few-cycle THz source. Furthermore, we identify beam walk-off as the main obstacle that currently limits the conversion efficiency in this excitation regime (with moderate pulse energies and small spot sizes). Further upscaling to the watt level and beyond is within reach, paving the way for linear and nonlinear high-average power THz spectroscopy experiments with exceptional signal-to-noise ratio at MHz repetition rates.
△ Less
Submitted 1 February, 2020;
originally announced February 2020.
-
Efficient Spectral Broadening in the 100-W Average Power Regime Using Gas Filled Kagome HC-PCF and Pulse Compression
Authors:
Florian Emaury,
Clara J. Saraceno,
Benoit Debord,
Debashri Ghosh,
Andreas Diebold,
Frederic Gerome,
Thomas Suedmeyer,
Fetah Benabid,
Ursula Keller
Abstract:
We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a Kagome HC-PCF containing 13 bar…
▽ More
We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a Kagome HC-PCF containing 13 bar of static Argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100 W of average power and >100 MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100 MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance.
△ Less
Submitted 17 October, 2014;
originally announced October 2014.
-
Gigahertz Self-referenceable Frequency Comb from a Semiconductor Disk Laser
Authors:
Christian A. Zaugg,
Alexander Klenner,
Mario Mangold,
Aline S. Mayer,
Sandro M. Link,
Florian Emaury,
Matthias Golling,
Emilio Gini,
Clara J. Saraceno,
Bauke W. Tilma,
Ursula Keller
Abstract:
We present a 1.75-GHz self-referenceable frequency comb from a vertical external-cavity surface-emitting laser (VECSEL) passively modelocked with a semiconductor saturable absorber mirror (SESAM). The VECSEL delivers 231-fs pulses with an average power of 100 mW and is optimized for stable and reliable operation. The optical spectrum was centered around 1038 nm and nearly transform-limited with a…
▽ More
We present a 1.75-GHz self-referenceable frequency comb from a vertical external-cavity surface-emitting laser (VECSEL) passively modelocked with a semiconductor saturable absorber mirror (SESAM). The VECSEL delivers 231-fs pulses with an average power of 100 mW and is optimized for stable and reliable operation. The optical spectrum was centered around 1038 nm and nearly transform-limited with a full width half maximum (FWHM) bandwidth of 5.5 nm. The pulses were first amplified to an average power of 5.5 W using a backward-pumped Yb-doped double-clad large mode area (LMA) fiber and then compressed to 85 fs with 2.2 W of average power with a passive LMA fiber and transmission gratings. Subsequently, we launched the pulses into a highly nonlinear photonic crystal fiber (PCF) and generated a coherent octave-spanning supercontinuum (SC). We then detected the carrier-envelope offset (CEO) frequency (fCEO) beat note using a standard f-to-2f-interferometer. The fCEO exhibits a signal-to-noise ratio of 17 dB in a 100-kHz resolution bandwidth and a FWHM of 10 MHz. To our knowledge, this is the first report on the detection of the fCEO from a semiconductor laser, opening the door to fully stabilized compact frequency combs based on modelocked semiconductor disk lasers.
△ Less
Submitted 21 May, 2014; v1 submitted 20 May, 2014;
originally announced May 2014.