-
Experimental end-to-end demonstration of intersatellite absolute ranging for LISA
Authors:
Kohei Yamamoto,
Iouri Bykov,
Jan Niklas Reinhardt,
Christoph Bode,
Pascal Grafe,
Martin Staab,
Narjiss Messied,
Myles Clark,
Germán Fernández Barranco,
Thomas S. Schwarze,
Olaf Hartwig,
Juan José Esteban Delgado,
Gerhard Heinzel
Abstract:
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on…
▽ More
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on-ground observatories, optical sideband-sideband beatnotes, pseudo-random noise ranging (PRNR), and time-delay interferometric ranging (TDIR). This article reports on the experimental end-to-end demonstration of a hexagonal optical testbed used to extract absolute ranges via the optical sidebands, PRNR, and TDIR. These were applied for clock synchronization of optical beatnote signals sampled at independent phasemeters. We set up two possible PRNR processing schemes: Scheme 1 extracts pseudoranges from PRNR via a calibration relying on TDIR; Scheme 2 synchronizes all beatnote signals without TDIR calibration. The schemes rely on newly implemented monitors of local PRNR biases. After the necessary PRNR treatments (unwrapping, ambiguity resolution, bias correction, in-band jitter reduction, and/or calibration), Scheme 1 and 2 achieved ranging accuracies of 2.0 cm to 8.1 cm and 5.8 cm to 41.1 cm, respectively, below the classical 1 m mark with margins.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
In-Depth Modeling of Tilt-To-Length Coupling in LISA's Interferometers and TDI Michelson Observables
Authors:
Gudrun Wanner,
Sweta Shah,
Martin Staab,
Henry Wegener,
Sarah Paczkowski
Abstract:
We present first-order models for tilt-to-length (TTL) coupling in LISA, both for the individual interferometers as well as in the time-delay interferometry (TDI) Michelson observables. These models include the noise contributions from angular and lateral jitter coupling of the six test masses, six movable optical subassemblies (MOSAs), and three spacecraft. We briefly discuss which terms are cons…
▽ More
We present first-order models for tilt-to-length (TTL) coupling in LISA, both for the individual interferometers as well as in the time-delay interferometry (TDI) Michelson observables. These models include the noise contributions from angular and lateral jitter coupling of the six test masses, six movable optical subassemblies (MOSAs), and three spacecraft. We briefly discuss which terms are considered to be dominant and reduce the TTL model for the second-generation TDI Michelson X observable to these primary noise contributions to estimate the resulting noise level. We show that the expected TTL noise will initially violate the entire mission displacement noise budget, resulting in the known necessity to fit and subtract TTL noise in data post-processing. By comparing the noise levels for different assumptions prior to subtraction, we show why noise mitigation by realignment prior to subtraction is favorable. We then discuss that the TTL coupling in the individual interferometers will have noise contributions that will not be present in the TDI observables. Models for TTL coupling noise in TDI and in the individual interferometers are therefore different, and commonly made assumptions are valid as such only for TDI but not for the individual interferometers. Finally, we analyze what implications can be drawn from the presented models for the subsequent fit-and-subtraction in post-processing. We show that noise contributions from the test mass and inter-satellite interferometers are indistinguishable, such that only the combined coefficients can be fit and used for subtraction. However, a distinction is considered not necessary. Additionally, we show a correlation between coefficients for transmitter and receiver jitter couplings in each individual TDI Michelson observable. This full correlation can be resolved by using all three Michelson observables for fitting the TTL coefficients.
△ Less
Submitted 6 June, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
LISA Definition Study Report
Authors:
Monica Colpi,
Karsten Danzmann,
Martin Hewitson,
Kelly Holley-Bockelmann,
Philippe Jetzer,
Gijs Nelemans,
Antoine Petiteau,
David Shoemaker,
Carlos Sopuerta,
Robin Stebbins,
Nial Tanvir,
Henry Ward,
William Joseph Weber,
Ira Thorpe,
Anna Daurskikh,
Atul Deep,
Ignacio Fernández Núñez,
César García Marirrodriga,
Martin Gehler,
Jean-Philippe Halain,
Oliver Jennrich,
Uwe Lammers,
Jonan Larrañaga,
Maike Lieser,
Nora Lützgendorf
, et al. (86 additional authors not shown)
Abstract:
The Laser Interferometer Space Antenna (LISA) is the first scientific endeavour to detect and study gravitational waves from space. LISA will survey the sky for Gravitational Waves in the 0.1 mHz to 1 Hz frequency band which will enable the study of a vast number of objects ranging from Galactic binaries and stellar mass black holes in the Milky Way, to distant massive black-hole mergers and the e…
▽ More
The Laser Interferometer Space Antenna (LISA) is the first scientific endeavour to detect and study gravitational waves from space. LISA will survey the sky for Gravitational Waves in the 0.1 mHz to 1 Hz frequency band which will enable the study of a vast number of objects ranging from Galactic binaries and stellar mass black holes in the Milky Way, to distant massive black-hole mergers and the expansion of the Universe. This definition study report, or Red Book, presents a summary of the very large body of work that has been undertaken on the LISA mission over the LISA definition phase.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Symmetry Enforced Fermi Surface Degeneracies Observed in Time-Reversal Symmetry-Breaking Superconductor LaNiGa$_2$
Authors:
Matthew Staab,
Robert Prater,
Sudheer Sreedhar,
Journey Byland,
Eliana Mann,
Davis Zackaria,
Yunshu Shi,
Henry J. Bowman,
Andrew L. Stephens,
Myung-Chul Jung,
Antia S. Botana,
Warren E. Pickett,
Valentin Taufour,
Inna Vishik
Abstract:
LaNiGa$_2$ is superconductor that breaks time-reversal symmetry in the superconducting state without any known nearby magnetism. Recently, single crystals of LaNiGa$_2$ have been synthesized, revealing a nonsymmorphic Cmcm space group. Here, we report measurements of the electronic structure of LaNiGa$_2$ throughout the three-dimensional Brillouin zone (BZ) using angle-resolved photoemission spect…
▽ More
LaNiGa$_2$ is superconductor that breaks time-reversal symmetry in the superconducting state without any known nearby magnetism. Recently, single crystals of LaNiGa$_2$ have been synthesized, revealing a nonsymmorphic Cmcm space group. Here, we report measurements of the electronic structure of LaNiGa$_2$ throughout the three-dimensional Brillouin zone (BZ) using angle-resolved photoemission spectroscopy (ARPES). Our findings show broad consistency with density functional theory (DFT) calculations and provide evidence for degeneracies in the electronic structure that are predicted from the space group. The calculations also predict four Fermi surfaces which cross the purported nodal plane and should therefore form two degenerate pairs. We report evidence for those predicted symmetry enforced degeneracies as well as accidental near degeneracies throughout the BZ. These degeneracies and near-degeneracies may play a role in the pairing mechanism of LaNiGa$_2$. Our results provide insight into the interplay between structure, Fermiology, and superconductivity in unconventional superconductors with nonsymmorphic space group.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Ranging Sensor Fusion in LISA Data Processing: Treatment of Ambiguities, Noise, and On-Board Delays in LISA Ranging Observables
Authors:
Jan Niklas Reinhardt,
Martin Staab,
Kohei Yamamoto,
Jean-Baptiste Bayle,
Aurélien Hees,
Olaf Hartwig,
Karsten Wiesner,
Sweta Shah,
Gerhard Heinzel
Abstract:
Interspacecraft ranging is crucial for the suppression of laser frequency noise via time-delay interferometry (TDI). So far, the effects of on-board delays and ambiguities on the LISA ranging observables were neglected in LISA modelling and data processing investigations. In reality, on-board delays cause offsets and timestamping delays in the LISA measurements, and pseudo-random noise (PRN) rangi…
▽ More
Interspacecraft ranging is crucial for the suppression of laser frequency noise via time-delay interferometry (TDI). So far, the effects of on-board delays and ambiguities on the LISA ranging observables were neglected in LISA modelling and data processing investigations. In reality, on-board delays cause offsets and timestamping delays in the LISA measurements, and pseudo-random noise (PRN) ranging is ambiguous, as it only determines the range up to an integer multiple of the PRN code length. In this article, we identify the four LISA ranging observables: PRN ranging, the sideband beatnotes at the interspacecraft interferometer, TDI ranging, and ground-based observations. We derive their observation equations in the presence of on-board delays, noise, and ambiguities. We then propose a three-stage ranging sensor fusion to combine these observables in order to gain accurate and precise ranging estimates. We propose to calibrate the on-board delays on ground and to compensate the associated offsets and timestamping delays in an initial data treatment (stage 1). We identify the ranging-related routines, which need to run continuously during operation (stage 2), and implement them numerically. Essentially, this involves the reduction of ranging noise, for which we develop a Kalman filter combining the PRN ranging and the sideband beatnotes. We further implement crosschecks for the PRN ranging ambiguities and offsets (stage 3). We show that both ground-based observations and TDI ranging can be used to resolve the PRN ranging ambiguities. Moreover, we apply TDI ranging to estimate the PRN ranging offsets.
△ Less
Submitted 16 January, 2024; v1 submitted 11 July, 2023;
originally announced July 2023.
-
Laser noise residuals in LISA from onboard processing and time-delay interferometry
Authors:
Martin Staab,
Marc Lilley,
Jean-Baptiste Bayle,
Olaf Hartwig
Abstract:
Time-delay interferometry (TDI) is a crucial step in the on-ground data processing pipeline of the Laser Interferometer Space Antenna (LISA), as it reduces otherwise overwhelming laser noise and allows for the detection of gravitational waves. This being said, several laser noise couplings have been identified that limit the performance of TDI. First, on-board processing, which is used to decimate…
▽ More
Time-delay interferometry (TDI) is a crucial step in the on-ground data processing pipeline of the Laser Interferometer Space Antenna (LISA), as it reduces otherwise overwhelming laser noise and allows for the detection of gravitational waves. This being said, several laser noise couplings have been identified that limit the performance of TDI. First, on-board processing, which is used to decimate the sampling rate from tens of MHz down to a few Hz, requires careful design of the anti-aliasing filters to mitigate folding of laser noise power into the observation band. Furthermore, the flatness of those filters is important to limit the effect of the flexing-filtering coupling. Secondly, the post-processing delays applied in TDI are subject to ranging and interpolation errors. All of these effects are partially described in the literature. In this paper, we present them in a unified framework and give a more complete description of aliased laser noise and the coupling of interpolation errors. Furthermore, for the first time, we discuss the impact of laser locking on laser noise residuals in the final TDI output. To verify the validity of the analytic PSD models we derive, we run numerical simulations using LISA Instrument and calculate second-generation TDI variables with PyTDI. We consider a setup with six independent lasers and with locked lasers (locking configuration N1-12). We find that laser locking indeed affects the laser noise residual in the TDI combination as it introduces correlations among the six lasers inducing slight modulations of the PSD compared to the case of six independent lasers. This implies further studies on laser noise residuals should consider the various locking configurations to produce accurate results.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
The influence of laser relative intensity noise in the Laser Interferometer Space Antenna
Authors:
Lennart Wissel,
Olaf Hartwig,
Jean-Baptiste Bayle,
Martin Staab,
Ewan D. Fitzsimons,
Martin Hewitson,
Gerhard Heinzel
Abstract:
LISA is an upcoming ESA mission that will detect gravitational waves in space by interferometrically measuring the separation between free-falling test masses at picometer precision. To reach the desired performance, LISA will employ the noise reduction technique time-delay interferometry (TDI), in which multiple raw interferometric readouts are time shifted and combined into the final scientific…
▽ More
LISA is an upcoming ESA mission that will detect gravitational waves in space by interferometrically measuring the separation between free-falling test masses at picometer precision. To reach the desired performance, LISA will employ the noise reduction technique time-delay interferometry (TDI), in which multiple raw interferometric readouts are time shifted and combined into the final scientific observables. Evaluating the performance in terms of these TDI variables requires careful tracking of how different noise sources propagate through TDI, as noise correlations might affect the performance in unexpected ways. One example of such potentially correlated noise is the relative intensity noise (RIN) of the six lasers aboard the three LISA satellites, which will couple into the interferometric phase measurements. In this article, we calculate the expected RIN levels based on the current mission architecture and the envisaged mitigation strategies. We find that strict requirements on the technical design reduce the effect from approximately 8.7 pm/rtHz per inter-spacecraft interferometer to that of a much lower sub-1 pm/rtHz noise, with typical characteristics of an uncorrelated readout noise after TDI. Our investigations underline the importance of sufficient balanced detection of the interferometric measurements.
△ Less
Submitted 4 January, 2023; v1 submitted 22 December, 2022;
originally announced December 2022.
-
TDI noises transfer functions for LISA
Authors:
Dam Quang Nam,
Yves Lemiere,
Antoine Petiteau,
Jean-Baptiste Bayle,
Olaf Hartwig,
Joseph Martino,
Martin Staab
Abstract:
The LISA mission is the future space-based gravitational wave (GW) observatory of the European Space Agency. It is formed by 3 spacecraft exchanging laser beams in order to form multiple real and virtual interferometers. The data streams to be used in order to extract the large number and variety of GW sources are Time-Delay Interferometry (TDI) data. One important processing to produce these data…
▽ More
The LISA mission is the future space-based gravitational wave (GW) observatory of the European Space Agency. It is formed by 3 spacecraft exchanging laser beams in order to form multiple real and virtual interferometers. The data streams to be used in order to extract the large number and variety of GW sources are Time-Delay Interferometry (TDI) data. One important processing to produce these data is the TDI on-ground processing which recombines multiple interferometric on-board measurements to remove certain noise sources from the data such as laser frequency noise or spacecraft jitter. The LISA noise budget is therefore expressed at the TDI level in order to account for the different TDI transfer functions applied for each noise source and thus estimate their real weight on mission performance. In order to derive a usable form of these transfer functions, a model of the beams, the measurements, and TDI have been developed, and several approximation have been made. A methodology for such a derivation has been established, as well as verification procedures. It results in a set of transfer functions, which are now used by the LISA project, in particular in its performance model. Using these transfer functions, realistic noise curves for various instrumental configurations are provided to data analysis algorithms and used for instrument design.
△ Less
Submitted 4 November, 2022;
originally announced November 2022.
-
Copper migration and surface oxidation of $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$ in ambient pressure environments
Authors:
Adam L. Gross,
Lorenz Falling,
Matthew C. Staab,
Metzli I. Montero,
Rahim R. Ullah,
David M. Nisson,
Peter Klavins,
Kristie J. Koski,
Nicholas J. Curro,
Valentin Taufour,
Slavomir Nemsak,
Inna M. Vishik
Abstract:
Chemical modifications such as intercalation can be used to modify surface properties or to further functionalize the surface states of topological insulators. Using ambient pressure X-ray photoelectron spectroscopy, we report copper migration in $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$, which occurs on a timescale of hours to days after initial surface cleaving. The increase in near-surface copper p…
▽ More
Chemical modifications such as intercalation can be used to modify surface properties or to further functionalize the surface states of topological insulators. Using ambient pressure X-ray photoelectron spectroscopy, we report copper migration in $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$, which occurs on a timescale of hours to days after initial surface cleaving. The increase in near-surface copper proceeds along with the oxidation of the sample surface and large changes in the selenium content. These complex changes are further modelled with core-level spectroscopy simulations, which suggest a composition gradient near the surface which develops with oxygen exposure. Our results shed light on a new phenomenon that must be considered for intercalated topological insulators$\unicode{x2014}$and intercalated materials in general$\unicode{x2014}$that surface chemical composition can change when specimens are exposed to ambient conditions.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
The `n2EDM MSR' -- a very large magnetically shielded room with an exceptional performance for fundamental physics measurements
Authors:
N. J. Ayres,
G. Ban,
G. Bison,
K. Bodek,
V. Bondar,
T. Bouillaud,
B. Clement,
E. Chanel,
P. -J. Chiu,
C. B. Crawford,
M. Daum,
C. B. Doorenbos,
S. Emmenegger,
A. Fratangelo,
M. Fertl,
W. C. Griffith,
Z. D. Grujic,
P. G. Harris,
K. Kirch,
J. Krempel,
B. Lauss,
T. Lefort,
O. Naviliat-Cuncic,
D. Pais,
F. M. Piegsa
, et al. (19 additional authors not shown)
Abstract:
We present the magnetically shielded room (MSR) for the n2EDM experiment at the Paul Scherrer Institute which features an interior cubic volume with each side of length 2.92m, thus providing an accessible space of 25m3. The MSR has 87 openings up to 220mm diameter to operate the experimental apparatus inside, and an intermediate space between the layers for sensitive signal processing electronics.…
▽ More
We present the magnetically shielded room (MSR) for the n2EDM experiment at the Paul Scherrer Institute which features an interior cubic volume with each side of length 2.92m, thus providing an accessible space of 25m3. The MSR has 87 openings up to 220mm diameter to operate the experimental apparatus inside, and an intermediate space between the layers for sensitive signal processing electronics. The characterization measurements show a remanent magnetic field in the central 1m3 below 100pT, and a field below 600pT in the entire inner volume, up to 4\,cm to the walls. The quasi-static shielding factor at 0.01\,Hz measured with a sinusoidal 2muT peak-to-peak signal is about 100,000 in all three spatial directions and rises fast with frequency to reach 10^8 above 1Hz.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Time delay interferometry without clock synchronisation
Authors:
Olaf Hartwig,
Jean-Baptiste Bayle,
Martin Staab,
Aurélien Hees,
Marc Lilley,
Peter Wolf
Abstract:
Time-delay interferometry (TDI) is a data processing technique for LISA designed to suppress the otherwise overwhelming laser noise by several orders of magnitude. It is widely believed that TDI can only be applied once all phase or frequency measurements from each spacecraft have been synchronized to a common time frame. We demonstrate analytically, using as an example the commonly-used Michelson…
▽ More
Time-delay interferometry (TDI) is a data processing technique for LISA designed to suppress the otherwise overwhelming laser noise by several orders of magnitude. It is widely believed that TDI can only be applied once all phase or frequency measurements from each spacecraft have been synchronized to a common time frame. We demonstrate analytically, using as an example the commonly-used Michelson combination X, that TDI can be computed using the raw, unsynchronized data, thereby avoiding the need for an initial synchronization processing step and significantly simplifying the initial noise reduction pipeline. Furthermore, the raw data is free of any potential artifacts introduced by clock synchronization and reference frame transformation algorithms, which allows to operate directly on the MHz beatnotes. As a consequence, in-band clock noise is directly suppressed as part of TDI, in contrast to the approach previously proposed in the literature (in which large trends in the beatnotes are removed before the main laser-noise reduction step, and clock noise is suppressed in an extra processing step). We validate our algorithm with full-scale numerical simulations that use LISA Instrument and PyTDI and show that we reach the same performance levels as the previously proposed methods, ultimately limited by the clock sideband stability.
△ Less
Submitted 19 May, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Experimental verification of intersatellite clock synchronization at LISA performance levels
Authors:
Kohei Yamamoto,
Christoph Vorndamme,
Olaf Hartwig,
Martin Staab,
Thomas S. Schwarze,
Gerhard Heinzel
Abstract:
The Laser Interferometer Space Antenna (LISA) aims to observe gravitational waves in the mHz regime over its 10-year mission time. LISA will operate laser interferometers between three spacecrafts. Each spacecraft will utilize independent clocks which determine the sampling times of onboard phasemeters to extract the interferometric phases and, ultimately, gravitational wave signals. To suppress l…
▽ More
The Laser Interferometer Space Antenna (LISA) aims to observe gravitational waves in the mHz regime over its 10-year mission time. LISA will operate laser interferometers between three spacecrafts. Each spacecraft will utilize independent clocks which determine the sampling times of onboard phasemeters to extract the interferometric phases and, ultimately, gravitational wave signals. To suppress limiting laser frequency noise, signals sampled by each phasemeter need to be combined in postprocessing to synthesize virtual equal-arm interferometers. The synthesis in turn requires a synchronization of the independent clocks. This article reports on the experimental verification of a clock synchronization scheme down to LISA performance levels using a hexagonal optical bench. The development of the scheme includes data processing that is expected to be applicable to the real LISA data with minor modifications. Additionally, some noise coupling mechanisms are discussed.
△ Less
Submitted 2 March, 2022; v1 submitted 23 December, 2021;
originally announced December 2021.
-
Dirac lines and loop at the Fermi level in the Time-Reversal Symmetry Breaking Superconductor LaNiGa$_2$
Authors:
Jackson R. Badger,
Yundi Quan,
Matthew C. Staab,
Shuntaro Sumita,
Antonio Rossi,
Kasey P. Devlin,
Kelly Neubauer,
Daniel S. Shulman,
James C. Fettinger,
Peter Klavins,
Susan M. Kauzlarich,
Dai Aoki,
Inna M. Vishik,
Warren E. Pickett,
Valentin Taufour
Abstract:
Unconventional superconductors have Cooper pairs with lower symmetries than in conventional superconductors. In most unconventional superconductors, the additional symmetry breaking occurs in relation to typical ingredients such as strongly correlated Fermi liquid phases, magnetic fluctuations, or strong spin-orbit coupling in noncentrosymmetric structures. In this article, we show that the time-r…
▽ More
Unconventional superconductors have Cooper pairs with lower symmetries than in conventional superconductors. In most unconventional superconductors, the additional symmetry breaking occurs in relation to typical ingredients such as strongly correlated Fermi liquid phases, magnetic fluctuations, or strong spin-orbit coupling in noncentrosymmetric structures. In this article, we show that the time-reversal symmetry breaking in the superconductor LaNiGa$_2$ is enabled by its previously unknown topological electronic band structure. Our single crystal diffraction experiments indicate a nonsymmorphic crystal structure, in contrast to the previously reported symmorphic structure. The nonsymmorphic symmetries transform the $k_z=π/c$ plane of the Brillouin zone boundary into a node-surface. Band-structure calculations reveal that distinct Fermi surfaces become degenerate on the node-surface and form Dirac lines and a Dirac loop at the Fermi level. Two symmetry related Dirac points remain degenerate under spin-orbit coupling. ARPES measurements confirm the calculations and provide evidence for the Fermi surface degeneracies on the node-surface. These unique topological features enable an unconventional superconducting gap in which time-reversal symmetry can be broken in the absence of other typical ingredients. LaNiGa$_2$ is therefore a topological crystalline superconductor that breaks time-reversal symmetry without any overlapping magnetic ordering or fluctuations. Our findings will enable future discoveries of additional topological superconductors.
△ Less
Submitted 14 September, 2021;
originally announced September 2021.
-
Adapting time-delay interferometry for LISA data in frequency
Authors:
Jean-Baptiste Bayle,
Olaf Hartwig,
Martin Staab
Abstract:
Time-delay interferometry (TDI) is a post-processing technique used to reduce laser noise in heterodyne interferometric measurements with unequal armlengths, a situation characteristic of space gravitational detectors such as Laser Interferometer Space Antenna (LISA). This technique consists in properly time-shifting and linearly combining the interferometric measurements in order to reduce the la…
▽ More
Time-delay interferometry (TDI) is a post-processing technique used to reduce laser noise in heterodyne interferometric measurements with unequal armlengths, a situation characteristic of space gravitational detectors such as Laser Interferometer Space Antenna (LISA). This technique consists in properly time-shifting and linearly combining the interferometric measurements in order to reduce the laser noise by several orders of magnitude and to detect gravitational waves. In this communication, we show that the Doppler shift due to the time evolution of the armlengths leads to an unacceptably large residual noise when using interferometric measurements expressed in units of frequency and standard expressions of the TDI variables. We also present a technique to mitigate this effect by including a scaling of the interferometric measurements in addition to the usual time-shifting operation when constructing the TDI variables. We demonstrate analytically and using numerical simulations that this technique allows one to recover standard laser noise suppression which is necessary to measure gravitational waves.
△ Less
Submitted 14 June, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
The Evolution of Status Preferences in Anti-Coordination Games
Authors:
Manuel Staab
Abstract:
This paper analyses how risk-taking behavior and preferences over consumption rank can emerge as an evolutionary stable equilibrium when agents face an anti-coordination task. If in an otherwise homogeneous society information about relative consumption is available, this cannot be ignored. Despite concavity in the objective function, agents are willing to accept risky gambles to differentiate the…
▽ More
This paper analyses how risk-taking behavior and preferences over consumption rank can emerge as an evolutionary stable equilibrium when agents face an anti-coordination task. If in an otherwise homogeneous society information about relative consumption is available, this cannot be ignored. Despite concavity in the objective function, agents are willing to accept risky gambles to differentiate themselves and thus allow for coordination. This suggests status preferences to be salient in settings where miscoordination is particularly costly.
△ Less
Submitted 5 November, 2020;
originally announced November 2020.
-
Unveiling Defect-Mediated Carrier Dynamics in Monolayer Semiconductors by Spatiotemporal Microwave Imaging
Authors:
Zhaodong Chu,
Chun-Yuan Wang,
Jiamin Quan,
Chenhui Zhang,
Chao Lei,
Ali Han,
Xuejian Ma,
Hao-Ling Tang,
Dishan Abeysinghe,
Matthew Staab,
Xixiang Zhang,
Allan H. MacDonald,
Vincent Tung,
Xiaoqin Li,
Chih-Kang Shih,
Keji Lai
Abstract:
The optoelectronic properties of atomically thin transition-metal dichalcogenides are strongly correlated with the presence of defects in the materials, which are not necessarily detrimental for certain applications. For instance, defects can lead to an enhanced photoconduction, a complicated process involving charge generation and recombination in the time domain and carrier transport in the spat…
▽ More
The optoelectronic properties of atomically thin transition-metal dichalcogenides are strongly correlated with the presence of defects in the materials, which are not necessarily detrimental for certain applications. For instance, defects can lead to an enhanced photoconduction, a complicated process involving charge generation and recombination in the time domain and carrier transport in the spatial domain. Here, we report the simultaneous spatial and temporal photoconductivity imaging in two types of WS2 monolayers by laser-illuminated microwave impedance microscopy. The diffusion length and carrier lifetime were directly extracted from the spatial profile and temporal relaxation of microwave signals respectively. Time-resolved experiments indicate that the critical process for photo-excited carriers is the escape of holes from trap states, which prolongs the apparent lifetime of mobile electrons in the conduction band. As a result, counterintuitively, the photoconductivity is stronger in CVD samples than exfoliated monolayers with a lower defect density. Our work reveals the intrinsic time and length scales of electrical response to photo-excitation in van der Waals materials, which is essential for their applications in novel optoelectronic devices.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Moiré Potential Impedes Interlayer Exciton Diffusion in van der Waals Heterostructures
Authors:
Junho Choi,
Wei-Ting Hsu,
Li-Syuan Lu,
Liuyang Sun,
Hui-Yu Cheng,
Ming-Hao Lee,
Jiamin Quan,
Kha Tran,
Chun-Yuan Wang,
Matthew Staab,
Kayleigh Jones,
Takashi Taniguchi,
Kenji Watanabe,
Ming-Wen Chu,
Shangjr Gwo,
Suenne Kim,
Chih-Kang Shih,
Xiaoqin Li,
Wen-Hao Chang
Abstract:
The properties of van der Waals (vdW) heterostructures are drastically altered by a tunable moiré superlattice arising from periodic variations of atomic alignment between the layers. Exciton diffusion represents an important channel of energy transport in semiconducting transition metal dichalcogenides (TMDs). While early studies performed on TMD heterobilayers have suggested that carriers and ex…
▽ More
The properties of van der Waals (vdW) heterostructures are drastically altered by a tunable moiré superlattice arising from periodic variations of atomic alignment between the layers. Exciton diffusion represents an important channel of energy transport in semiconducting transition metal dichalcogenides (TMDs). While early studies performed on TMD heterobilayers have suggested that carriers and excitons exhibit long diffusion lengths, a rich variety of scenarios can exist. In a moiré crystal with a large supercell size and deep potential, interlayer excitons may be completely localized. As the moiré period reduces at a larger twist angle, excitons can tunnel between supercells and diffuse over a longer lifetime. The diffusion length should be the longest in commensurate heterostructures where the moiré superlattice is completely absent. In this study, we experimentally demonstrate that the moiré potential impedes interlayer exciton diffusion by comparing a number of WSe2/MoSe2 heterostructures prepared with chemical vapor deposition and mechanical stacking with accurately controlled twist angles. Our results provide critical guidance to developing 'twistronic' devices that explore the moiré superlattice to engineer material properties.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.
-
Revisiting the crystal structure of the equilibrium S (Al2CuMg) phase in Al-Cu-Mg alloys using X-ray absorption spectroscopy (XAFS)
Authors:
Danny Petschke,
Frank Lotter,
Torsten E. M. Staab
Abstract:
Even though, the crystal structure of the intermediate (S') and the equilibrium S (Al2CuMg) phase were subject of many investigations by using mostly imaging or diffraction techniques, the results remain still controversial. In this study, we used X-ray absorption spectroscopy (XAFS) to verify the correct structure considering the well-known models reported by Perlitz & Westgren (PW), Mondolfo, Ra…
▽ More
Even though, the crystal structure of the intermediate (S') and the equilibrium S (Al2CuMg) phase were subject of many investigations by using mostly imaging or diffraction techniques, the results remain still controversial. In this study, we used X-ray absorption spectroscopy (XAFS) to verify the correct structure considering the well-known models reported by Perlitz & Westgren (PW), Mondolfo, Radmilovic & Kilaas and Yan et al. The structure was confirmed by direct comparison to simulated XAFS spectra using the software tool FDMNES. Our results support the widely accepted PW model as the correct structure while other models do not match our observations.
△ Less
Submitted 14 February, 2019;
originally announced February 2019.
-
Deep Depth From Focus
Authors:
Caner Hazirbas,
Sebastian Georg Soyer,
Maximilian Christian Staab,
Laura Leal-Taixé,
Daniel Cremers
Abstract:
Depth from focus (DFF) is one of the classical ill-posed inverse problems in computer vision. Most approaches recover the depth at each pixel based on the focal setting which exhibits maximal sharpness. Yet, it is not obvious how to reliably estimate the sharpness level, particularly in low-textured areas. In this paper, we propose `Deep Depth From Focus (DDFF)' as the first end-to-end learning ap…
▽ More
Depth from focus (DFF) is one of the classical ill-posed inverse problems in computer vision. Most approaches recover the depth at each pixel based on the focal setting which exhibits maximal sharpness. Yet, it is not obvious how to reliably estimate the sharpness level, particularly in low-textured areas. In this paper, we propose `Deep Depth From Focus (DDFF)' as the first end-to-end learning approach to this problem. One of the main challenges we face is the hunger for data of deep neural networks. In order to obtain a significant amount of focal stacks with corresponding groundtruth depth, we propose to leverage a light-field camera with a co-calibrated RGB-D sensor. This allows us to digitally create focal stacks of varying sizes. Compared to existing benchmarks our dataset is 25 times larger, enabling the use of machine learning for this inverse problem. We compare our results with state-of-the-art DFF methods and we also analyze the effect of several key deep architectural components. These experiments show that our proposed method `DDFFNet' achieves state-of-the-art performance in all scenes, reducing depth error by more than 75% compared to the classical DFF methods.
△ Less
Submitted 28 October, 2018; v1 submitted 4 April, 2017;
originally announced April 2017.